fix(deps): update module github.com/pion/webrtc/v4 to v4.1.4

Generated by Renovate Bot

.github/workflows/ci.yaml

@@ -11,14 +11,18 @@ jobs:
   build-linux:
     runs-on: ubuntu-latest
     strategy:
+      fail-fast: false
       matrix:
-        go: [ '1.15', '1.14' ]
+        go:
+          - '1.21' # oldest version this package supports
+          - '1.22' # oldstable Go version
+          - '1.23' # stable Go version
     name: Linux Go ${{ matrix.go }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Setup Go
-        uses: actions/setup-go@v2
+        uses: actions/setup-go@v6
         with:
           go-version: ${{ matrix.go }}
       - name: Install dependencies
@@ -28,54 +32,54 @@ jobs:
             libopus-dev \
             libva-dev \
             libvpx-dev \
-            libx264-dev
-      - name: go vet
-        run: go vet $(go list ./... | grep -v mmal)
-      - name: go build
-        run: go build $(go list ./... | grep -v mmal)
-      - name: go build without CGO
-        run: go build . pkg/...
-        env:
-          CGO_ENABLED: 0
-      - name: go test
-        run: go test -v -race -coverprofile=coverage.txt -covermode=atomic $(go list ./... | grep -v mmal)
-      - uses: codecov/codecov-action@v1
-        if: matrix.go == '1.15'
-      - name: go test without CGO
-        run: go test . pkg/... -v
-        env:
-          CGO_ENABLED: 0
+            libx11-dev \
+            libx264-dev \
+            libxext-dev
+      - name: Run Test Suite
+        run: make test
+      - uses: codecov/codecov-action@v5
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
   build-darwin:
-    runs-on: macos-latest
     strategy:
+      fail-fast: false
       matrix:
-        go: [ '1.15', '1.14' ]
+        go:
+          - '1.22'
+          - '1.23'
+    runs-on: macos-latest
     name: Darwin Go ${{ matrix.go }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
       - name: Setup Go
-        uses: actions/setup-go@v2
+        uses: actions/setup-go@v6
         with:
           go-version: ${{ matrix.go }}
       - name: Install dependencies
         run: |
+          which brew
           brew install \
             pkg-config \
             opus \
             libvpx \
             x264
-      - name: go vet
-        run: go vet $(go list ./... | grep -v mmal)
-      - name: go build
-        run: go build $(go list ./... | grep -v mmal)
-      - name: go build without CGO
-        run: go build . pkg/...
-        env:
-          CGO_ENABLED: 0
-      - name: go test
-        run: go test -v -race $(go list ./... | grep -v mmal)
-      - name: go test without CGO
-        run: go test . pkg/... -v
-        env:
-          CGO_ENABLED: 0
+      - name: Run Test Suite
+        run: make test
+      - uses: codecov/codecov-action@v5
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+  check-licenses:
+    runs-on: ubuntu-latest
+    name: Check Licenses
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+      - name: Setup Go
+        uses: actions/setup-go@v6
+        with:
+          go-version: stable
+      - name: Installing go-licenses
+        run: go install github.com/google/go-licenses@latest
+      - name: Checking licenses
+        run: go-licenses check ./...

.github/workflows/renovate-go-mod-fix.yaml

@@ -9,7 +9,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: checkout
-        uses: actions/checkout@v2
+        uses: actions/checkout@v4
         with:
           fetch-depth: 2
       - name: fix

.gitignore

@@ -10,3 +10,8 @@
 
 # Output of the go coverage tool, specifically when used with LiteIDE
 *.out
+
+scripts/cross
+coverage.txt
+
+.idea

.gitmodules

@@ -1,3 +0,0 @@
-[submodule "cvendor/src/openh264"]
-	path = cvendor/src/openh264
-	url = https://github.com/cisco/openh264.git

Makefile

@@ -1,56 +1,83 @@
-vendor_dir = cvendor
-src_dir = $(vendor_dir)/src
-lib_dir = $(vendor_dir)/lib
-include_dir = $(vendor_dir)/include
+docker_owner := lherman
+docker_prefix := cross
+toolchain_dockerfiles := dockerfiles
+script_path := $(realpath scripts)
+toolchain_path := $(script_path)/$(docker_prefix)
+os_list := \
+	linux \
+	windows \
+	darwin
+arch_list := \
+	armv7 \
+	arm64 \
+	x64
+supported_platforms := \
+  linux-armv7 \
+  linux-arm64 \
+  linux-x64 \
+  windows-x64 \
+  darwin-x64 \
+  darwin-arm64
+cmd_build := build
+cmd_test := test
+examples_dir := examples
+codec_dir := pkg/codec
+codec_list := $(shell ls $(codec_dir)/*/Makefile)
+codec_list := $(codec_list:$(codec_dir)/%/Makefile=%)
+targets := $(foreach codec, $(codec_list), $(addprefix $(cmd_build)-$(codec)-, $(supported_platforms)))
+pkgs_without_ext_device := $(shell go list ./... | grep -v mmal | grep -v vaapi)
+pkgs_without_cgo := $(shell go list ./... | grep -v pkg/codec | grep -v pkg/driver | grep -v pkg/avfoundation)
 
-make_args.x86_64-windows = \
-	CC=x86_64-w64-mingw32-gcc \
-	CXX=x86_64-w64-mingw32-g++ \
-	ARCH=x86_64 \
-	OS=mingw_nt
-make_args.x86_64-darwin = \
-	CC=o64-clang \
-	CXX=o64-clang++ \
-	AR=llvm-ar \
-	ARCH=x86_64 \
-	OS=darwin
+define BUILD_TEMPLATE
+ifneq (,$$(findstring $(2)-$(3),$$(supported_platforms)))
+$$(cmd_build)-$(1)-$(2)-$(3): toolchain-$(2)-$(3)
+	$$(MAKE) --directory=$$(codec_dir)/$(1) \
+		MEDIADEVICES_TOOLCHAIN_BIN=$$(toolchain_path)/$(docker_prefix)-$(2)-$(3) \
+		MEDIADEVICES_TARGET_PLATFORM=$(2)-$(3) \
+		MEDIADEVICES_TARGET_OS=$(2) \
+		MEDIADEVICES_TARGET_ARCH=$(3)
+endif
+endef
 
-.PHONY: vendor
-vendor: \
-	$(include_dir)/openh264 \
-	cross-libraries
+.PHONY: all
+all: $(cmd_test) $(cmd_build)
 
-$(include_dir)/openh264: $(src_dir)/openh264
-	mkdir -p $@
-	cp $^/codec/api/svc/*.h $@
+# Subcommand:
+# 	make build[-<codec_name>-<os>-<arch>]
+#
+# Description:
+# 	Build codec dependencies to multiple platforms.
+#
+# Examples:
+#   * make build: build all codecs for all supported platforms
+#   * make build-opus-darwin-x64: only build opus for darwin-x64 platform
+$(cmd_build): $(targets)
 
-$(lib_dir)/openh264/libopenh264.x86_64-linux.a: $(src_dir)/openh264
-	$(MAKE) -C $^ clean \
-		&& $(MAKE) -C $^ libraries
-	mkdir -p $(dir $@)
-	cp $^/libopenh264.a $@
+toolchain-%: $(toolchain_dockerfiles)
+	$(MAKE) --directory=$< "$*" \
+		MEDIADEVICES_DOCKER_OWNER=$(docker_owner) \
+		MEDIADEVICES_DOCKER_PREFIX=$(docker_prefix)
+	@mkdir -p $(toolchain_path)
+	@docker run $(docker_owner)/$(docker_prefix)-$* > \
+		$(toolchain_path)/$(docker_prefix)-$*
+	@chmod +x $(toolchain_path)/$(docker_prefix)-$*
 
-$(lib_dir)/openh264/libopenh264.x86_64-windows.a: $(src_dir)/openh264
-	$(MAKE) -C $^ clean \
-		&& $(MAKE) -C $^ $(make_args.x86_64-windows) libraries
-	mkdir -p $(dir $@)
-	cp $^/libopenh264.a $@
+$(foreach codec, $(codec_list), \
+	$(foreach os, $(os_list), \
+		$(foreach arch, $(arch_list), \
+			$(eval $(call BUILD_TEMPLATE,$(codec),$(os),$(arch))))))
 
-$(lib_dir)/openh264/libopenh264.x86_64-darwin.a: $(src_dir)/openh264
-	$(MAKE) -C $^ clean \
-		&& $(MAKE) -C $^ $(make_args.x86_64-darwin) libraries
-	mkdir -p $(dir $@)
-	cp $^/libopenh264.a $@
-
-.PHONY: cross-libraries
-cross-libraries:
-	docker build -t mediadevices-libs-builder -f libs-builder.Dockerfile .
-	docker run --rm \
-		-v $(CURDIR):/go/src/github.com/pion/mediadevices \
-		mediadevices-libs-builder make $(lib_dir)/openh264/libopenh264.x86_64-linux.a
-	docker run --rm \
-		-v $(CURDIR):/go/src/github.com/pion/mediadevices \
-		mediadevices-libs-builder make $(lib_dir)/openh264/libopenh264.x86_64-windows.a
-	docker run --rm \
-		-v $(CURDIR):/go/src/github.com/pion/mediadevices \
-		mediadevices-libs-builder make $(lib_dir)/openh264/libopenh264.x86_64-darwin.a
+# Subcommand:
+# 	make test
+#
+# Description:
+# 	Run a series of tests
+$(cmd_test):
+	go vet $(pkgs_without_ext_device)
+	go build $(pkgs_without_ext_device)
+	# go build without CGO
+	CGO_ENABLED=0 go build $(pkgs_without_cgo)
+	# go build with CGO
+	CGO_ENABLED=1 go build $(pkgs_without_ext_device)
+	$(MAKE) --directory=$(examples_dir)
+	go test -v -race -coverprofile=coverage.txt -covermode=atomic $(pkgs_without_ext_device)

README.md

@@ -5,82 +5,228 @@
 </h1>
 <h4 align="center">Go implementation of the <a href="https://developer.mozilla.org/en-US/docs/Web/API/MediaDevices">MediaDevices</a> API</h4>
 <p align="center">
-  <a href="https://pion.ly/slack"><img src="https://img.shields.io/badge/join-us%20on%20slack-gray.svg?longCache=true&logo=slack&colorB=brightgreen" alt="Slack Widget"></a>
-  <a href="https://github.com/pion/mediadevices/actions"><img src="https://github.com/pion/mediadevices/workflows/CI/badge.svg?branch=master" alt="Build status"></a> 
-  <a href="https://pkg.go.dev/github.com/pion/mediadevices"><img src="https://godoc.org/github.com/pion/mediadevices?status.svg" alt="GoDoc"></a>
+  <a href="https://discord.gg/PngbdqpFbt"><img src="https://img.shields.io/badge/join-us%20on%20discord-gray.svg?longCache=true&logo=discord&colorB=brightblue" alt="join us on Discord"></a> <a href="https://bsky.app/profile/pion.ly"><img src="https://img.shields.io/badge/follow-us%20on%20bluesky-gray.svg?longCache=true&logo=bluesky&colorB=brightblue" alt="Follow us on Bluesky"></a> <a href="https://twitter.com/_pion?ref_src=twsrc%5Etfw"><img src="https://img.shields.io/twitter/url.svg?label=Follow%20%40_pion&style=social&url=https%3A%2F%2Ftwitter.com%2F_pion" alt="Twitter Widget"></a>
+  <img alt="GitHub Workflow Status" src="https://img.shields.io/github/actions/workflow/status/pion/mediadevices/test.yaml">
+  <a href="https://pkg.go.dev/github.com/pion/mediadevices"><img src="https://pkg.go.dev/badge/github.com/pion/mediadevices.svg" alt="Go Reference"></a>
   <a href="https://codecov.io/gh/pion/mediadevices"><img src="https://codecov.io/gh/pion/mediadevices/branch/master/graph/badge.svg" alt="Coverage Status"></a>
   <a href="LICENSE"><img src="https://img.shields.io/badge/License-MIT-yellow.svg" alt="License: MIT"></a>
 </p>
 <br>
 
-![](img/demo.gif)
+`mediadevices` provides access to media input devices like cameras, microphones, and screen capture. It can also be used to encode your video/audio stream to various codec selections. `mediadevices` abstracts away the complexities of interacting with things like hardware and codecs allowing you to focus on building appilcations, interacting only with an amazingly simple, easy, and elegant API!
 
-## Interfaces
+### Install
 
-| Interface  | Linux | Mac | Windows |
+```bash
+go get -u github.com/pion/mediadevices
+```
+
+### Usage
+
+The following snippet shows how to capture a camera stream and store a frame as a jpeg image:
+
+```go
+package main
+
+import (
+	"image/jpeg"
+	"os"
+
+	"github.com/pion/mediadevices"
+	"github.com/pion/mediadevices/pkg/prop"
+
+	// This is required to register camera adapter
+	_ "github.com/pion/mediadevices/pkg/driver/camera" 
+	// Note: If you don't have a camera or your adapters are not supported,
+	//       you can always swap your adapters with our dummy adapters below.
+	// _ "github.com/pion/mediadevices/pkg/driver/videotest"
+)
+
+func main() {
+	stream, _ := mediadevices.GetUserMedia(mediadevices.MediaStreamConstraints{
+		Video: func(constraint *mediadevices.MediaTrackConstraints) {
+			// Query for ideal resolutions
+			constraint.Width = prop.Int(600)
+			constraint.Height = prop.Int(400)
+		},
+	})
+
+	// Since track can represent audio as well, we need to cast it to 
+	// *mediadevices.VideoTrack to get video specific functionalities
+	track := stream.GetVideoTracks()[0]
+	videoTrack := track.(*mediadevices.VideoTrack)
+	defer videoTrack.Close()
+
+	// Create a new video reader to get the decoded frames. Release is used 
+	// to return the buffer to hold frame back to the source so that the buffer 
+	// can be reused for the next frames.
+	videoReader := videoTrack.NewReader(false)
+	frame, release, _ := videoReader.Read()
+	defer release()
+
+	// Since frame is the standard image.Image, it's compatible with Go standard 
+	// library. For example, capturing the first frame and store it as a jpeg image.
+	output, _ := os.Create("frame.jpg")
+	jpeg.Encode(output, frame, nil)
+}
+```
+
+### More Examples
+* [Webrtc](/examples/webrtc) - Use Webrtc to create a realtime peer-to-peer video call
+* [Face Detection](/examples/facedetection) - Use a machine learning algorithm to detect faces in a camera stream
+* [RTP Stream](examples/rtp) - Capture camera stream, encode it in H264/VP8/VP9, and send it to a RTP server
+* [HTTP Broadcast](/examples/http) - Broadcast camera stream through HTTP with MJPEG
+* [Archive](/examples/archive) - Archive H264 encoded video stream from a camera
+
+### Available Media Inputs
+| Input      | Linux | Mac | Windows |
 | :--------: | :---: | :-: | :-----: |
-|   Camera   |  ✔️   | ✔️  |   ✔️    |
-| Microphone |  ✔️   | ✖️  |   ✔️    |
-|   Screen   |  ✔️   | ✖️  |   ✖️    |
+| Camera     | ✔️     | ✔️   | ✔️       |
+| Microphone | ✔️     | ✔️   | ✔️       |
+| Screen     | ✔️     | ✔️   | ✔️       |
 
-### Camera
+By default, there's no media input registered. This decision was made to allow you to play only what you need. Therefore, you need to import the associated packages for the media inputs. For example, if you want to use a camera, you need to import the camera package as a side effect:
 
-|   OS    |                           Library/Interface                             |
-| :-----: | :---------------------------------------------------------------------: |
-|  Linux  |        [Video4Linux](https://en.wikipedia.org/wiki/Video4Linux)         |
-|   Mac   |       [AVFoundation](https://developer.apple.com/av-foundation/)        |
-| Windows | [DirectShow](https://docs.microsoft.com/en-us/windows/win32/directshow) |
+```go
+import (
+	...
+	_ "github.com/pion/mediadevices/pkg/driver/camera"
+)
+```
 
-|                     Pixel Format                      | Linux | Mac | Windows |
-| :---------------------------------------------------: | :---: | :-: | :-----: |
-| [YUY2](https://www.fourcc.org/pixel-format/yuv-yuy2/) |  ✔️   | ✖️  |   ✔️    |
-| [UYVY](https://www.fourcc.org/pixel-format/yuv-uyvy/) |  ✔️   | ✔️  |   ✖️    |
-| [I420](https://www.fourcc.org/pixel-format/yuv-i420/) |  ✔️   | ✖️  |   ✖️    |
-| [NV21](https://www.fourcc.org/pixel-format/yuv-nv21/) |  ✔️   | ✔️  |   ✖️    |
-|         [MJPEG](https://www.fourcc.org/mjpg/)         |  ✔️   | ✖️  |   ✖️    |
+### Available Codecs
+In order to encode your video/audio, `mediadevices` needs to know what codecs that you want to use and their parameters. To do this, you need to import the associated packages for the codecs, and add them to the codec selector that you'll pass to `GetUserMedia`:
 
-### Microphone
+```go
+package main
 
-|   OS    |                            Library/Interface                            |
-| :-----: | :---------------------------------------------------------------------: |
-|  Linux  |         [PulseAudio](https://en.wikipedia.org/wiki/PulseAudio)          |
-|   Mac   |                                   N/A                                   |
-| Windows |  [waveIn](https://docs.microsoft.com/en-us/windows/win32/api/mmeapi/)   |
+import (
+	"github.com/pion/mediadevices"
+	"github.com/pion/mediadevices/pkg/codec/x264"      // This is required to use H264 video encoder
+	_ "github.com/pion/mediadevices/pkg/driver/camera" // This is required to register camera adapter
+)
 
-### Screen casting
+func main() {
+	// configure codec specific parameters
+	x264Params, _ := x264.NewParams()
+	x264Params.Preset = x264.PresetMedium
+	x264Params.BitRate = 1_000_000 // 1mbps
 
-|   OS    |                            Library/Interface                            |
-| :-----: | :---------------------------------------------------------------------: |
-|  Linux  |          [X11](https://en.wikipedia.org/wiki/X_Window_System)           |
-|   Mac   |                                   N/A                                   |
-| Windows |                                   N/A                                   |
+	codecSelector := mediadevices.NewCodecSelector(
+		mediadevices.WithVideoEncoders(&x264Params),
+	)
+	
+	mediaStream, _ := mediadevices.GetUserMedia(mediadevices.MediaStreamConstraints{
+		Video: func(c *mediadevices.MediaTrackConstraints) {},
+		Codec: codecSelector, // let GetUsermedia know available codecs
+	})
+}
+```
 
-## Codecs
+Since `mediadevices` doesn't implement the video/audio codecs, it needs to call the codec libraries from the system through cgo. Therefore, you're required to install the codec libraries before you can use them in `mediadevices`. In the next section, it shows a list of available codecs, where the packages are defined (documentation linked), and installation instructions.
 
-| Audio Codec |                    Library/Interface                     |
-| :---------: | :------------------------------------------------------: |
-|    OPUS     | [libopus](http://opus-codec.org/)                        |
+Note: we do not provide recommendations on choosing one codec or another as it is very complex and can be subjective.
 
-| Video Codec |                    Library/Interface                     |
-| :---------: | :------------------------------------------------------: |
-|    H.264    | [OpenH264](https://www.openh264.org/)                    |
-|     VP8     | [libvpx](https://www.webmproject.org/code/)              |
-|     VP9     | [libvpx](https://www.webmproject.org/code/)              |
+#### Video Codecs
 
-## Usage
+##### x264
+A free software library and application for encoding video streams into the H.264/MPEG-4 AVC compression format.
 
-[Wiki](https://github.com/pion/mediadevices/wiki)
+* Package: [github.com/pion/mediadevices/pkg/codec/x264](https://pkg.go.dev/github.com/pion/mediadevices/pkg/codec/x264)
+* Installation:
+  * Mac: `brew install x264`
+  * Ubuntu: `apt install libx264-dev`
+  
+##### mmal
+A framework to enable H264 hardware encoding for Raspberry Pi or boards that use VideoCore GPUs.
 
-## Contributing
+* Package: [github.com/pion/mediadevices/pkg/codec/mmal](https://pkg.go.dev/github.com/pion/mediadevices/pkg/codec/mmal)
+* Installation: no installation needed, mmal should come built in Raspberry Pi devices
 
-- [Lukas Herman](https://github.com/lherman-cs) - _Original Author_
-* [Atsushi Watanabe](https://github.com/at-wat) - _VP8, Screencast, etc._
+##### openh264
+A codec library which supports H.264 encoding and decoding. It is suitable for use in real time applications.
 
-## Project Status
+* Package: [github.com/pion/mediadevices/pkg/codec/openh264](https://pkg.go.dev/github.com/pion/mediadevices/pkg/codec/openh264)
+* Installation: no installation needed, included as a static binary
 
-[![Stargazers over time](https://starchart.cc/pion/mediadevices.svg)](https://starchart.cc/pion/mediadevices)
+##### vpx
+A free software video codec library from Google and the Alliance for Open Media that implements VP8/VP9 video coding formats.
 
-## References
+* Package: [github.com/pion/mediadevices/pkg/codec/vpx](https://pkg.go.dev/github.com/pion/mediadevices/pkg/codec/vpx)
+* Installation:
+  * Mac: `brew install libvpx`
+  * Ubuntu: `apt install libvpx-dev`
+  
+##### vaapi
+An open source API that allows applications such as VLC media player or GStreamer to use hardware video acceleration capabilities (currently support VP8/VP9).
 
-- https://developer.mozilla.org/en-US/docs/Web/Media/Formats/WebRTC_codecs
-- https://tools.ietf.org/html/rfc7742
+* Package: [github.com/pion/mediadevices/pkg/codec/vaapi](https://pkg.go.dev/github.com/pion/mediadevices/pkg/codec/vaapi)
+* Installation:
+  * Ubuntu: `apt install libva-dev`
+
+
+#### Audio Codecs
+
+##### opus
+A totally open, royalty-free, highly versatile audio codec.
+
+* Package: [github.com/pion/mediadevices/pkg/codec/opus](https://pkg.go.dev/github.com/pion/mediadevices/pkg/codec/opus)
+* Installation:
+  * Mac: `brew install opus`
+  * Ubuntu: `apt install libopus-dev`
+
+### Benchmark
+Result as of Nov 4, 2020 with Go 1.14 on a Raspberry pi 3, `mediadevices` can produce video, encode, send across network, and decode at **720p, 30 fps with < 500 ms latency**.  
+
+The test was taken by capturing a camera stream, decoding the raw frames, encoding the video stream with mmal, and sending the stream through Webrtc.
+
+### FAQ
+
+#### Failed to find the best driver that fits the constraints
+`mediadevices` provides an automated driver discovery through `GetUserMedia` and `GetDisplayMedia`. The driver discover algorithm works something like:
+
+1. Open all registered drivers
+2. Get all properties (property describes what a driver is capable of, e.g. resolution, frame rate, etc.) from opened drivers
+3. Find the best property that meets the criteria
+
+So, when `mediadevices` returns `failed to find the best driver that fits the constraints` error, one of the following conditions might have occured:
+* Driver was not imported as a side effect in your program, e.g. `import _ github.com/pion/mediadevices/pkg/driver/camera`
+* Your constraint is too strict that there's no driver can fullfil your requirements. In this case, you can try to turn up the debug level by specifying the following environment variable: `export PION_LOG_DEBUG=all` to see what was too strict and tune that.
+* Your driver is not supported/implemented. In this case, you can either let us know (file an issue) and wait for the maintainers to implement it. Or, you can implement it yourself and register it through `RegisterDriverAdapter`
+* If trying to use `import _ github.com/pion/mediadevices/pkg/driver/screen` note that you will need to use `GetDisplayMedia` instead of `GetUserMedia` 
+
+#### Failed to find vpx/x264/mmal/opus codecs
+Since `mediadevices` uses cgo to access video/audio codecs, it needs to find these libraries from the system. To accomplish this, [pkg-config](https://www.freedesktop.org/wiki/Software/pkg-config/) is used for library discovery.
+
+If you see the following error message at compile time:
+
+```bash
+# pkg-config --cflags  -- vpx
+Package vpx was not found in the pkg-config search path.
+Perhaps you should add the directory containing `vpx.pc'
+to the PKG_CONFIG_PATH environment variable
+No package 'vpx' found
+pkg-config: exit status 1
+```
+
+There are 2 common problems:
+
+* The required codec library is not installed (vpx in this example). In this case, please refer to the [available codecs](#available-codecs).
+* Pkg-config fails to find the `.pc` files for this codec ([reference](https://people.freedesktop.org/~dbn/pkg-config-guide.html#using)). In this case, you need to find where the codec library's `.pc` is stored, and let pkg-config knows with: `export PKG_CONFIG_PATH=/path/to/directory`.
+
+### Roadmap
+The library can be used with our WebRTC implementation. Please refer to that [roadmap](https://github.com/pion/webrtc/issues/9) to track our major milestones.
+
+### Community
+Pion has an active community on [Discord](https://discord.gg/PngbdqpFbt).
+
+Follow the [Pion Twitter](https://twitter.com/_pion) and the [Pion Bluesky](https://bsky.app/profile/pion.ly) for project updates and important WebRTC news.
+
+We are always looking to support **your projects**. Please reach out if you have something to build!
+If you need commercial support or don't want to use public methods you can contact us at [team@pion.ly](mailto:team@pion.ly)
+
+### Contributing
+Check out the [contributing wiki](https://github.com/pion/webrtc/wiki/Contributing) to join the group of amazing people making this project possible
+
+### License
+MIT License - see [LICENSE](LICENSE) for full text

codec.go

@@ -9,7 +9,7 @@ import (
 	"github.com/pion/mediadevices/pkg/io/audio"
 	"github.com/pion/mediadevices/pkg/io/video"
 	"github.com/pion/mediadevices/pkg/prop"
-	"github.com/pion/webrtc/v2"
+	"github.com/pion/webrtc/v4"
 )
 
 // CodecSelector is a container of video and audio encoder builders, which later will be used
@@ -50,14 +50,15 @@ func NewCodecSelector(opts ...CodecSelectorOption) *CodecSelector {
 // Populate lets the webrtc engine be aware of supported codecs that are contained in CodecSelector
 func (selector *CodecSelector) Populate(setting *webrtc.MediaEngine) {
 	for _, encoder := range selector.videoEncoders {
-		setting.RegisterCodec(encoder.RTPCodec().RTPCodec)
+		setting.RegisterCodec(encoder.RTPCodec().RTPCodecParameters, webrtc.RTPCodecTypeVideo)
 	}
 
 	for _, encoder := range selector.audioEncoders {
-		setting.RegisterCodec(encoder.RTPCodec().RTPCodec)
+		setting.RegisterCodec(encoder.RTPCodec().RTPCodecParameters, webrtc.RTPCodecTypeAudio)
 	}
 }
 
+// selectVideoCodecByNames selects a single codec that can be built and matched. codecNames can be formatted as "video/<codecName>" or "<codecName>"
 func (selector *CodecSelector) selectVideoCodecByNames(reader video.Reader, inputProp prop.Media, codecNames ...string) (codec.ReadCloser, *codec.RTPCodec, error) {
 	var selectedEncoder codec.VideoEncoderBuilder
 	var encodedReader codec.ReadCloser
@@ -66,8 +67,10 @@ func (selector *CodecSelector) selectVideoCodecByNames(reader video.Reader, inpu
 
 outer:
 	for _, wantCodec := range codecNames {
+		wantCodecLower := strings.ToLower(wantCodec)
 		for _, encoder := range selector.videoEncoders {
-			if encoder.RTPCodec().Name == wantCodec {
+			// MimeType is formated as "video/<codecName>"
+			if strings.HasSuffix(strings.ToLower(encoder.RTPCodec().MimeType), wantCodecLower) {
 				encodedReader, err = encoder.BuildVideoEncoder(reader, inputProp)
 				if err == nil {
 					selectedEncoder = encoder
@@ -75,7 +78,7 @@ outer:
 				}
 			}
 
-			errReasons = append(errReasons, fmt.Sprintf("%s: %s", encoder.RTPCodec().Name, err))
+			errReasons = append(errReasons, fmt.Sprintf("%s: %s", encoder.RTPCodec().MimeType, err))
 		}
 	}
 
@@ -86,16 +89,17 @@ outer:
 	return encodedReader, selectedEncoder.RTPCodec(), nil
 }
 
-func (selector *CodecSelector) selectVideoCodec(reader video.Reader, inputProp prop.Media, codecs ...*webrtc.RTPCodec) (codec.ReadCloser, *codec.RTPCodec, error) {
+func (selector *CodecSelector) selectVideoCodec(reader video.Reader, inputProp prop.Media, codecs ...webrtc.RTPCodecParameters) (codec.ReadCloser, *codec.RTPCodec, error) {
 	var codecNames []string
 
 	for _, codec := range codecs {
-		codecNames = append(codecNames, codec.Name)
+		codecNames = append(codecNames, codec.MimeType)
 	}
 
 	return selector.selectVideoCodecByNames(reader, inputProp, codecNames...)
 }
 
+// selectAudioCodecByNames selects a single codec that can be built and matched. codecNames can be formatted as "audio/<codecName>" or "<codecName>"
 func (selector *CodecSelector) selectAudioCodecByNames(reader audio.Reader, inputProp prop.Media, codecNames ...string) (codec.ReadCloser, *codec.RTPCodec, error) {
 	var selectedEncoder codec.AudioEncoderBuilder
 	var encodedReader codec.ReadCloser
@@ -104,8 +108,10 @@ func (selector *CodecSelector) selectAudioCodecByNames(reader audio.Reader, inpu
 
 outer:
 	for _, wantCodec := range codecNames {
+		wantCodecLower := strings.ToLower(wantCodec)
 		for _, encoder := range selector.audioEncoders {
-			if encoder.RTPCodec().Name == wantCodec {
+			// MimeType is formated as "audio/<codecName>"
+			if strings.HasSuffix(strings.ToLower(encoder.RTPCodec().MimeType), wantCodecLower) {
 				encodedReader, err = encoder.BuildAudioEncoder(reader, inputProp)
 				if err == nil {
 					selectedEncoder = encoder
@@ -113,7 +119,7 @@ outer:
 				}
 			}
 
-			errReasons = append(errReasons, fmt.Sprintf("%s: %s", encoder.RTPCodec().Name, err))
+			errReasons = append(errReasons, fmt.Sprintf("%s: %s", encoder.RTPCodec().MimeType, err))
 		}
 	}
 
@@ -124,11 +130,11 @@ outer:
 	return encodedReader, selectedEncoder.RTPCodec(), nil
 }
 
-func (selector *CodecSelector) selectAudioCodec(reader audio.Reader, inputProp prop.Media, codecs ...*webrtc.RTPCodec) (codec.ReadCloser, *codec.RTPCodec, error) {
+func (selector *CodecSelector) selectAudioCodec(reader audio.Reader, inputProp prop.Media, codecs ...webrtc.RTPCodecParameters) (codec.ReadCloser, *codec.RTPCodec, error) {
 	var codecNames []string
 
 	for _, codec := range codecs {
-		codecNames = append(codecNames, codec.Name)
+		codecNames = append(codecNames, codec.MimeType)
 	}
 
 	return selector.selectAudioCodecByNames(reader, inputProp, codecNames...)

cvendor/include/openh264/codec_ver.h

@@ -1,15 +0,0 @@
-//The current file is auto-generated by script: generate_codec_ver.sh
-#ifndef CODEC_VER_H
-#define CODEC_VER_H
-
-#include "codec_app_def.h"
-
-static const OpenH264Version g_stCodecVersion  = {2, 0, 0, 1905};
-static const char* const g_strCodecVer  = "OpenH264 version:2.0.0.1905";
-
-#define OPENH264_MAJOR (2)
-#define OPENH264_MINOR (0)
-#define OPENH264_REVISION (0)
-#define OPENH264_RESERVED (1905)
-
-#endif  // CODEC_VER_H

dockerfiles/Makefile

@@ -0,0 +1,11 @@
+dockerfiles := $(wildcard *.Dockerfile)
+supported_platforms := $(dockerfiles:.Dockerfile=)
+
+.PHONY: all
+all: $(supported_platforms)
+
+%: %.Dockerfile guard-MEDIADEVICES_DOCKER_OWNER guard-MEDIADEVICES_DOCKER_PREFIX
+	docker build -t "$(MEDIADEVICES_DOCKER_OWNER)/$(MEDIADEVICES_DOCKER_PREFIX)-$@" -f "$<" . 
+
+guard-%:
+	@if [ -z ${$*} ]; then echo "$* is a required environment variable"; exit 1; fi

dockerfiles/darwin-arm64.Dockerfile

@@ -0,0 +1,47 @@
+FROM dockercore/golang-cross as m1cross
+
+ARG DEBIAN_FRONTEND=noninteractive
+RUN apt-get update -qq && apt-get install -y -q --no-install-recommends \
+    cmake \
+    git \
+    libssl-dev \
+    libxml2-dev \
+    libz-dev \
+  && rm -rf /var/lib/apt/lists/*
+
+ENV SDK_VERSION=11.3 \
+    TARGET_DIR=/osxcross/target \
+    UNATTENDED=1
+
+WORKDIR /work
+RUN git clone --depth=1 https://github.com/tpoechtrager/osxcross.git /work \
+  && cd /work/tarballs \
+  && wget -q https://github.com/phracker/MacOSX-SDKs/releases/download/${SDK_VERSION}/MacOSX${SDK_VERSION}.sdk.tar.xz
+
+# Build cross compile toolchain for Apple silicon
+RUN ./build.sh
+
+
+FROM dockcross/base
+
+ENV OSX_CROSS_PATH=/osxcross
+
+COPY --from=m1cross "${OSX_CROSS_PATH}/." "${OSX_CROSS_PATH}/"
+ENV PATH=${OSX_CROSS_PATH}/target/bin:$PATH
+
+COPY init.sh /tmp/init.sh
+RUN bash /tmp/init.sh
+
+ENV CC=arm64-apple-darwin20.4-clang \
+    CXX=arm64-apple-darwin20.4-clang++ \
+    CPP=arm64-apple-darwin20.4-clang++ \
+    AR=arm64-apple-darwin20.4-ar \
+    AS=arm64-apple-darwin20.4-as \
+    LD=arm64-apple-darwin20.4-ld
+
+COPY darwin-arm64.cmake ${OSX_CROSS_PATH}/
+ENV CMAKE_TOOLCHAIN_FILE ${OSX_CROSS_PATH}/darwin-arm64.cmake
+
+ARG IMAGE=lherman/cross-darwin-arm64
+ARG VERSION=latest
+ENV DEFAULT_DOCKCROSS_IMAGE ${IMAGE}:${VERSION}

dockerfiles/darwin-arm64.cmake

@@ -0,0 +1,8 @@
+set(CMAKE_SYSTEM_NAME Darwin)
+set(CMAKE_SYSTEM_VERSION 1)
+set(CMAKE_SYSTEM_PROCESSOR arm64)
+
+set(CMAKE_C_COMPILER $ENV{CC})
+set(CMAKE_CXX_COMPILER $ENV{CXX})
+set(CMAKE_AR $ENV{AR})
+set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER})

dockerfiles/darwin-x64.Dockerfile

@@ -0,0 +1,23 @@
+FROM dockcross/base
+
+ENV OSX_CROSS_PATH=/osxcross
+
+COPY --from=dockercore/golang-cross "${OSX_CROSS_PATH}/." "${OSX_CROSS_PATH}/"
+ENV PATH=${OSX_CROSS_PATH}/target/bin:$PATH
+
+COPY init.sh /tmp/init.sh
+RUN bash /tmp/init.sh
+
+ENV CC=x86_64-apple-darwin14-clang \
+    CXX=x86_64-apple-darwin14-clang++ \
+    CPP=x86_64-apple-darwin14-clang++ \
+    AR=x86_64-apple-darwin14-ar \
+    AS=x86_64-apple-darwin14-as \
+    LD=x86_64-apple-darwin14-ld
+
+COPY darwin-x64.cmake ${OSX_CROSS_PATH}/
+ENV CMAKE_TOOLCHAIN_FILE ${OSX_CROSS_PATH}/darwin-x64.cmake
+
+ARG IMAGE=lherman/cross-darwin-x64
+ARG VERSION=latest
+ENV DEFAULT_DOCKCROSS_IMAGE ${IMAGE}:${VERSION}

dockerfiles/darwin-x64.cmake

@@ -0,0 +1,8 @@
+set(CMAKE_SYSTEM_NAME Darwin)
+set(CMAKE_SYSTEM_VERSION 1)
+set(CMAKE_SYSTEM_PROCESSOR x86_64)
+
+set(CMAKE_C_COMPILER $ENV{CC})
+set(CMAKE_CXX_COMPILER $ENV{CXX})
+set(CMAKE_AR $ENV{AR})
+set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER})

dockerfiles/init.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+apt-get update 
+apt-get install -y nasm clang llvm
+
+curl -L https://golang.org/dl/go1.15.6.linux-amd64.tar.gz | tar -C /usr/local -xzf -
+ln -s /usr/local/go/bin/go /usr/local/bin/go

dockerfiles/linux-arm64.Dockerfile

@@ -0,0 +1,8 @@
+FROM dockcross/linux-arm64
+
+ARG IMAGE=lherman/cross-linux-arm64
+ARG VERSION=latest
+ENV DEFAULT_DOCKCROSS_IMAGE ${IMAGE}:${VERSION}
+
+COPY init.sh /tmp/init.sh
+RUN bash /tmp/init.sh

dockerfiles/linux-armv7.Dockerfile

@@ -0,0 +1,8 @@
+FROM dockcross/linux-armv7
+
+ARG IMAGE=lherman/cross-linux-armv7
+ARG VERSION=latest
+ENV DEFAULT_DOCKCROSS_IMAGE ${IMAGE}:${VERSION}
+
+COPY init.sh /tmp/init.sh
+RUN bash /tmp/init.sh

dockerfiles/linux-x64.Dockerfile

@@ -0,0 +1,8 @@
+FROM dockcross/linux-x64
+
+ARG IMAGE=lherman/cross-linux-x64
+ARG VERSION=latest
+ENV DEFAULT_DOCKCROSS_IMAGE ${IMAGE}:${VERSION}
+
+COPY init.sh /tmp/init.sh
+RUN bash /tmp/init.sh

dockerfiles/windows-x64.Dockerfile

@@ -0,0 +1,11 @@
+FROM dockcross/windows-static-x64-posix
+
+ARG IMAGE=lherman/cross-windows-x64
+ARG VERSION=latest
+ENV DEFAULT_DOCKCROSS_IMAGE ${IMAGE}:${VERSION}
+
+COPY init.sh /tmp/init.sh
+RUN bash /tmp/init.sh
+RUN ln -s /usr/src/mxe/usr/bin/x86_64-w64-mingw32.static.posix-gcc /usr/bin/x86_64-w64-mingw32-gcc && \
+    ln -s /usr/src/mxe/usr/bin/x86_64-w64-mingw32.static.posix-g++ /usr/bin/x86_64-w64-mingw32-g++ && \
+    ln -s /usr/src/mxe/usr/bin/x86_64-w64-mingw32.static.posix-ar /usr/bin/x86_64-w64-mingw32-ar

examples/.gitignore

@@ -1 +0,0 @@
-go.sum

examples/Makefile

@@ -0,0 +1,8 @@
+examples := $(shell find * -maxdepth 0 -type d)
+examples := $(filter-out internal,$(examples))
+
+.PHONY: all $(examples)
+all: $(examples)
+
+$(examples):
+	cd $@ && go build -mod=mod

examples/archive/.gitignore

@@ -0,0 +1 @@
+archive

examples/archive/README.md

@@ -0,0 +1,38 @@
+## Instructions
+
+### Install required codecs
+
+In this example, we'll be using x264 as our video codec. Therefore, we need to make sure that these codecs are installed within our system. 
+
+Installation steps:
+
+* [x264](https://github.com/pion/mediadevices#x264)
+
+### Download archive examplee
+
+```
+git clone https://github.com/pion/mediadevices.git
+```
+
+### Run archive example
+
+Run `cd mediadevices/examples/archive && go build && ./archive recorded.h264`
+
+To stop recording, press `Ctrl+c` or send a SIGINT signal.
+
+### Playback recorded video
+
+Install GStreamer and run:
+```
+gst-launch-1.0 playbin uri=file://${PWD}/recorded.h264
+```
+
+Or run VLC media plyer:
+```
+vlc recorded.h264
+```
+
+A video should start playing in your GStreamer or VLC window.
+
+Congrats, you have used pion-MediaDevices! Now start building something cool
+

examples/archive/main.go

@@ -0,0 +1,82 @@
+package main
+
+import (
+	"fmt"
+	"image"
+	"io"
+	"os"
+	"os/signal"
+	"syscall"
+
+	"github.com/pion/mediadevices"
+	"github.com/pion/mediadevices/pkg/codec/x264"      // This is required to use H264 video encoder
+	_ "github.com/pion/mediadevices/pkg/driver/camera" // This is required to register camera adapter
+	"github.com/pion/mediadevices/pkg/frame"
+	"github.com/pion/mediadevices/pkg/io/video"
+	"github.com/pion/mediadevices/pkg/prop"
+)
+
+func must(err error) {
+	if err != nil {
+		panic(err)
+	}
+}
+
+func main() {
+	if len(os.Args) != 2 {
+		fmt.Printf("usage: %s <path/to/file.h264>\n", os.Args[0])
+		return
+	}
+	dest := os.Args[1]
+
+	sigs := make(chan os.Signal, 1)
+	signal.Notify(sigs, syscall.SIGINT)
+
+	x264Params, err := x264.NewParams()
+	must(err)
+	x264Params.Preset = x264.PresetMedium
+	x264Params.BitRate = 1_000_000 // 1mbps
+
+	codecSelector := mediadevices.NewCodecSelector(
+		mediadevices.WithVideoEncoders(&x264Params),
+	)
+
+	mediaStream, err := mediadevices.GetUserMedia(mediadevices.MediaStreamConstraints{
+		Video: func(c *mediadevices.MediaTrackConstraints) {
+			c.FrameFormat = prop.FrameFormat(frame.FormatI420)
+			c.Width = prop.Int(640)
+			c.Height = prop.Int(480)
+		},
+		Codec: codecSelector,
+	})
+	must(err)
+
+	videoTrack := mediaStream.GetVideoTracks()[0].(*mediadevices.VideoTrack)
+	defer videoTrack.Close()
+
+	videoTrack.Transform(video.TransformFunc(func(r video.Reader) video.Reader {
+		return video.ReaderFunc(func() (img image.Image, release func(), err error) {
+			// we send io.EOF signal to the encoder reader to stop reading. Therefore, io.Copy
+			// will finish its execution and the program will finish
+			select {
+			case <-sigs:
+				return nil, func() {}, io.EOF
+			default:
+			}
+
+			return r.Read()
+		})
+	}))
+
+	reader, err := videoTrack.NewEncodedIOReader(x264Params.RTPCodec().MimeType)
+	must(err)
+	defer reader.Close()
+
+	out, err := os.Create(dest)
+	must(err)
+
+	fmt.Println("Recording... Press Ctrl+c to stop")
+	_, err = io.Copy(out, reader)
+	must(err)
+	fmt.Println("Your video has been recorded to", dest)
+}

examples/facedetection/.gitignore

@@ -0,0 +1 @@
+facedetection

examples/facedetection/README.md

@@ -0,0 +1,15 @@
+## Instructions
+
+### Download facedetection example
+
+```
+git clone https://github.com/pion/mediadevices.git
+```
+
+### Compile and Run facedetection
+
+Run `cd mediadevices/examples/facedetection && go build && ./facedetection`
+
+You should be able to see some loggings when it can see faces.
+
+Congrats, you have used pion-MediaDevices! Now start building something cool

examples/facedetection/main.go

@@ -8,8 +8,8 @@ import (
 
 	pigo "github.com/esimov/pigo/core"
 	"github.com/pion/mediadevices"
-	_ "github.com/pion/mediadevices/pkg/driver/camera" // This is required to register camera adapter
 	"github.com/pion/mediadevices/pkg/frame"
+	_ "github.com/pion/mediadevices/pkg/driver/camera" // This is required to register camera adapter
 	"github.com/pion/mediadevices/pkg/prop"
 )
 
@@ -77,7 +77,7 @@ func main() {
 
 	mediaStream, err := mediadevices.GetUserMedia(mediadevices.MediaStreamConstraints{
 		Video: func(c *mediadevices.MediaTrackConstraints) {
-			c.FrameFormat = prop.FrameFormatExact(frame.FormatUYVY)
+			c.FrameFormat = prop.FrameFormatOneOf{frame.FormatI420, frame.FormatYUY2}
 			c.Width = prop.Int(640)
 			c.Height = prop.Int(480)
 		},
@@ -97,7 +97,7 @@ func main() {
 		frame, release, err := videoReader.Read()
 		must(err)
 
-		// Since we asked the frame format to be exactly YUY2 in GetUserMedia, we can guarantee that it must be YCbCr
+		// Since we asked the frame format to be exactly I420/YUY2 in GetUserMedia, we can guarantee that it must be YCbCr
 		if detectFace(frame.(*image.YCbCr)) {
 			log.Println("Detect a face")
 		}

examples/go.mod

@@ -1,9 +1,37 @@
 module github.com/pion/mediadevices/examples
 
-go 1.14
+go 1.21
 
-// Please don't commit require entries of examples.
-// `git checkout master examples/go.mod` to revert this file.
-require github.com/pion/mediadevices v0.0.0
+require (
+	github.com/esimov/pigo v1.4.6
+	github.com/pion/mediadevices v0.0.0
+	github.com/pion/webrtc/v4 v4.1.4
+)
+
+require (
+	github.com/blackjack/webcam v0.6.1 // indirect
+	github.com/gen2brain/malgo v0.11.23 // indirect
+	github.com/google/uuid v1.6.0 // indirect
+	github.com/pion/datachannel v1.5.10 // indirect
+	github.com/pion/dtls/v3 v3.0.7 // indirect
+	github.com/pion/ice/v4 v4.0.10 // indirect
+	github.com/pion/interceptor v0.1.40 // indirect
+	github.com/pion/logging v0.2.4 // indirect
+	github.com/pion/mdns/v2 v2.0.7 // indirect
+	github.com/pion/randutil v0.1.0 // indirect
+	github.com/pion/rtcp v1.2.15 // indirect
+	github.com/pion/rtp v1.8.21 // indirect
+	github.com/pion/sctp v1.8.39 // indirect
+	github.com/pion/sdp/v3 v3.0.15 // indirect
+	github.com/pion/srtp/v3 v3.0.7 // indirect
+	github.com/pion/stun/v3 v3.0.0 // indirect
+	github.com/pion/transport/v3 v3.0.7 // indirect
+	github.com/pion/turn/v4 v4.1.1 // indirect
+	github.com/wlynxg/anet v0.0.5 // indirect
+	golang.org/x/crypto v0.33.0 // indirect
+	golang.org/x/image v0.23.0 // indirect
+	golang.org/x/net v0.35.0 // indirect
+	golang.org/x/sys v0.30.0 // indirect
+)
 
 replace github.com/pion/mediadevices v0.0.0 => ../

examples/go.sum

@@ -0,0 +1,67 @@
+github.com/blackjack/webcam v0.6.1 h1:K0T6Q0zto23U99gNAa5q/hFoye6uGcKr2aE6hFoxVoE=
+github.com/blackjack/webcam v0.6.1/go.mod h1:zs+RkUZzqpFPHPiwBZ6U5B34ZXXe9i+SiHLKnnukJuI=
+github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
+github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
+github.com/disintegration/imaging v1.6.2/go.mod h1:44/5580QXChDfwIclfc/PCwrr44amcmDAg8hxG0Ewe4=
+github.com/esimov/pigo v1.4.6 h1:wpB9FstbqeGP/CZP+nTR52tUJe7XErq8buG+k4xCXlw=
+github.com/esimov/pigo v1.4.6/go.mod h1:uqj9Y3+3IRYhFK071rxz1QYq0ePhA6+R9jrUZavi46M=
+github.com/fogleman/gg v1.3.0/go.mod h1:R/bRT+9gY/C5z7JzPU0zXsXHKM4/ayA+zqcVNZzPa1k=
+github.com/gen2brain/malgo v0.11.23 h1:3/VAI8DP9/Wyx1CUDNlUQJVdWUvGErhjHDqYcHVk9ME=
+github.com/gen2brain/malgo v0.11.23/go.mod h1:f9TtuN7DVrXMiV/yIceMeWpvanyVzJQMlBecJFVMxww=
+github.com/golang/freetype v0.0.0-20170609003504-e2365dfdc4a0/go.mod h1:E/TSTwGwJL78qG/PmXZO1EjYhfJinVAhrmmHX6Z8B9k=
+github.com/google/uuid v1.6.0 h1:NIvaJDMOsjHA8n1jAhLSgzrAzy1Hgr+hNrb57e+94F0=
+github.com/google/uuid v1.6.0/go.mod h1:TIyPZe4MgqvfeYDBFedMoGGpEw/LqOeaOT+nhxU+yHo=
+github.com/pion/datachannel v1.5.10 h1:ly0Q26K1i6ZkGf42W7D4hQYR90pZwzFOjTq5AuCKk4o=
+github.com/pion/datachannel v1.5.10/go.mod h1:p/jJfC9arb29W7WrxyKbepTU20CFgyx5oLo8Rs4Py/M=
+github.com/pion/dtls/v3 v3.0.7 h1:bItXtTYYhZwkPFk4t1n3Kkf5TDrfj6+4wG+CZR8uI9Q=
+github.com/pion/dtls/v3 v3.0.7/go.mod h1:uDlH5VPrgOQIw59irKYkMudSFprY9IEFCqz/eTz16f8=
+github.com/pion/ice/v4 v4.0.10 h1:P59w1iauC/wPk9PdY8Vjl4fOFL5B+USq1+xbDcN6gT4=
+github.com/pion/ice/v4 v4.0.10/go.mod h1:y3M18aPhIxLlcO/4dn9X8LzLLSma84cx6emMSu14FGw=
+github.com/pion/interceptor v0.1.40 h1:e0BjnPcGpr2CFQgKhrQisBU7V3GXK6wrfYrGYaU6Jq4=
+github.com/pion/interceptor v0.1.40/go.mod h1:Z6kqH7M/FYirg3frjGJ21VLSRJGBXB/KqaTIrdqnOic=
+github.com/pion/logging v0.2.4 h1:tTew+7cmQ+Mc1pTBLKH2puKsOvhm32dROumOZ655zB8=
+github.com/pion/logging v0.2.4/go.mod h1:DffhXTKYdNZU+KtJ5pyQDjvOAh/GsNSyv1lbkFbe3so=
+github.com/pion/mdns/v2 v2.0.7 h1:c9kM8ewCgjslaAmicYMFQIde2H9/lrZpjBkN8VwoVtM=
+github.com/pion/mdns/v2 v2.0.7/go.mod h1:vAdSYNAT0Jy3Ru0zl2YiW3Rm/fJCwIeM0nToenfOJKA=
+github.com/pion/randutil v0.1.0 h1:CFG1UdESneORglEsnimhUjf33Rwjubwj6xfiOXBa3mA=
+github.com/pion/randutil v0.1.0/go.mod h1:XcJrSMMbbMRhASFVOlj/5hQial/Y8oH/HVo7TBZq+j8=
+github.com/pion/rtcp v1.2.15 h1:LZQi2JbdipLOj4eBjK4wlVoQWfrZbh3Q6eHtWtJBZBo=
+github.com/pion/rtcp v1.2.15/go.mod h1:jlGuAjHMEXwMUHK78RgX0UmEJFV4zUKOFHR7OP+D3D0=
+github.com/pion/rtp v1.8.21 h1:3yrOwmZFyUpcIosNcWRpQaU+UXIJ6yxLuJ8Bx0mw37Y=
+github.com/pion/rtp v1.8.21/go.mod h1:bAu2UFKScgzyFqvUKmbvzSdPr+NGbZtv6UB2hesqXBk=
+github.com/pion/sctp v1.8.39 h1:PJma40vRHa3UTO3C4MyeJDQ+KIobVYRZQZ0Nt7SjQnE=
+github.com/pion/sctp v1.8.39/go.mod h1:cNiLdchXra8fHQwmIoqw0MbLLMs+f7uQ+dGMG2gWebE=
+github.com/pion/sdp/v3 v3.0.15 h1:F0I1zds+K/+37ZrzdADmx2Q44OFDOPRLhPnNTaUX9hk=
+github.com/pion/sdp/v3 v3.0.15/go.mod h1:88GMahN5xnScv1hIMTqLdu/cOcUkj6a9ytbncwMCq2E=
+github.com/pion/srtp/v3 v3.0.7 h1:QUElw0A/FUg3MP8/KNMZB3i0m8F9XeMnTum86F7S4bs=
+github.com/pion/srtp/v3 v3.0.7/go.mod h1:qvnHeqbhT7kDdB+OGB05KA/P067G3mm7XBfLaLiaNF0=
+github.com/pion/stun/v3 v3.0.0 h1:4h1gwhWLWuZWOJIJR9s2ferRO+W3zA/b6ijOI6mKzUw=
+github.com/pion/stun/v3 v3.0.0/go.mod h1:HvCN8txt8mwi4FBvS3EmDghW6aQJ24T+y+1TKjB5jyU=
+github.com/pion/transport/v3 v3.0.7 h1:iRbMH05BzSNwhILHoBoAPxoB9xQgOaJk+591KC9P1o0=
+github.com/pion/transport/v3 v3.0.7/go.mod h1:YleKiTZ4vqNxVwh77Z0zytYi7rXHl7j6uPLGhhz9rwo=
+github.com/pion/turn/v4 v4.1.1 h1:9UnY2HB99tpDyz3cVVZguSxcqkJ1DsTSZ+8TGruh4fc=
+github.com/pion/turn/v4 v4.1.1/go.mod h1:2123tHk1O++vmjI5VSD0awT50NywDAq5A2NNNU4Jjs8=
+github.com/pion/webrtc/v4 v4.1.4 h1:/gK1ACGHXQmtyVVbJFQDxNoODg4eSRiFLB7t9r9pg8M=
+github.com/pion/webrtc/v4 v4.1.4/go.mod h1:Oab9npu1iZtQRMic3K3toYq5zFPvToe/QBw7dMI2ok4=
+github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
+github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
+github.com/stretchr/testify v1.11.1 h1:7s2iGBzp5EwR7/aIZr8ao5+dra3wiQyKjjFuvgVKu7U=
+github.com/stretchr/testify v1.11.1/go.mod h1:wZwfW3scLgRK+23gO65QZefKpKQRnfz6sD981Nm4B6U=
+github.com/wlynxg/anet v0.0.5 h1:J3VJGi1gvo0JwZ/P1/Yc/8p63SoW98B5dHkYDmpgvvU=
+github.com/wlynxg/anet v0.0.5/go.mod h1:eay5PRQr7fIVAMbTbchTnO9gG65Hg/uYGdc7mguHxoA=
+golang.org/x/crypto v0.33.0 h1:IOBPskki6Lysi0lo9qQvbxiQ+FvsCC/YWOecCHAixus=
+golang.org/x/crypto v0.33.0/go.mod h1:bVdXmD7IV/4GdElGPozy6U7lWdRXA4qyRVGJV57uQ5M=
+golang.org/x/image v0.0.0-20191009234506-e7c1f5e7dbb8/go.mod h1:FeLwcggjj3mMvU+oOTbSwawSJRM1uh48EjtB4UJZlP0=
+golang.org/x/image v0.0.0-20200927104501-e162460cd6b5/go.mod h1:FeLwcggjj3mMvU+oOTbSwawSJRM1uh48EjtB4UJZlP0=
+golang.org/x/image v0.23.0 h1:HseQ7c2OpPKTPVzNjG5fwJsOTCiiwS4QdsYi5XU6H68=
+golang.org/x/image v0.23.0/go.mod h1:wJJBTdLfCCf3tiHa1fNxpZmUI4mmoZvwMCPP0ddoNKY=
+golang.org/x/net v0.35.0 h1:T5GQRQb2y08kTAByq9L4/bz8cipCdA8FbRTXewonqY8=
+golang.org/x/net v0.35.0/go.mod h1:EglIi67kWsHKlRzzVMUD93VMSWGFOMSZgxFjparz1Qk=
+golang.org/x/sys v0.0.0-20191026070338-33540a1f6037/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20201107080550-4d91cf3a1aaf/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.30.0 h1:QjkSwP/36a20jFYWkSue1YwXzLmsV5Gfq7Eiy72C1uc=
+golang.org/x/sys v0.30.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
+golang.org/x/term v0.0.0-20191110171634-ad39bd3f0407/go.mod h1:Nr5EML6q2oocZ2LXRh80K7BxOlk5/8JxuGnuhpl+muw=
+golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
+gopkg.in/yaml.v3 v3.0.1 h1:fxVm/GzAzEWqLHuvctI91KS9hhNmmWOoWu0XTYJS7CA=
+gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=

examples/http/.gitignore

@@ -0,0 +1 @@
+http

examples/http/README.md

@@ -0,0 +1,19 @@
+## Instructions
+
+### Download http example
+
+```
+git clone https://github.com/pion/mediadevices.git
+```
+
+### Compile and Run HTTP server
+
+Run `cd mediadevices/examples/http && go build && ./http :1313`
+
+
+### Access the camera stream from the browser
+
+Go to "http://localhost:1313"
+
+
+Congrats, you have used pion-MediaDevices! Now start building something cool

examples/http/main.go

@@ -11,6 +11,7 @@ import (
 	"mime/multipart"
 	"net/http"
 	"net/textproto"
+	"os"
 
 	"github.com/pion/mediadevices"
 	"github.com/pion/mediadevices/pkg/prop"
@@ -28,7 +29,13 @@ func must(err error) {
 }
 
 func main() {
-	s, err := mediadevices.GetUserMedia(mediadevices.MediaStreamConstraints{
+	if len(os.Args) != 2 {
+		fmt.Printf("usage: %s host:port\n", os.Args[0])
+		return
+	}
+	dest := os.Args[1]
+
+	mediaStream, err := mediadevices.GetUserMedia(mediadevices.MediaStreamConstraints{
 		Video: func(constraint *mediadevices.MediaTrackConstraints) {
 			constraint.Width = prop.Int(600)
 			constraint.Height = prop.Int(400)
@@ -36,8 +43,9 @@ func main() {
 	})
 	must(err)
 
-	t := s.GetVideoTracks()[0]
-	videoTrack := t.(*mediadevices.VideoTrack)
+	track := mediaStream.GetVideoTracks()[0]
+	videoTrack := track.(*mediadevices.VideoTrack)
+	defer videoTrack.Close()
 
 	http.HandleFunc("/", func(w http.ResponseWriter, r *http.Request) {
 		var buf bytes.Buffer
@@ -72,6 +80,6 @@ func main() {
 		}
 	})
 
-	fmt.Println("listening on http://localhost:1313")
-	log.Println(http.ListenAndServe("localhost:1313", nil))
+	fmt.Printf("listening on %s\n", dest)
+	log.Println(http.ListenAndServe(dest, nil))
 }

examples/openh264/.gitignore

@@ -0,0 +1 @@
+openh264

examples/openh264/README.md

@@ -0,0 +1,22 @@
+## Instructions
+
+### Install required codecs
+
+In this example, we'll be using openh264 as our video codec. Therefore, we need to make sure that these codecs are installed within our system. 
+
+Installation steps:
+
+* [openh264](https://github.com/pion/mediadevices#openh264)
+
+### Download archive examplee
+
+```
+git clone https://github.com/pion/mediadevices.git
+```
+
+### Run openh264 example
+
+Run `cd mediadevices/examples/openh264 && go build && ./openh264 recorded.h264`
+set bitrate ,first press `Ctrl+c` or send a SIGINT signal.
+To stop recording,second press `Ctrl+c` or send a SIGINT signal.
+

examples/openh264/main.go

@@ -0,0 +1,96 @@
+package main
+
+import (
+	"fmt"
+	"image"
+	"io"
+	"os"
+	"os/signal"
+	"syscall"
+
+	"github.com/pion/mediadevices"
+	"github.com/pion/mediadevices/pkg/codec"
+	"github.com/pion/mediadevices/pkg/codec/openh264"
+	_ "github.com/pion/mediadevices/pkg/driver/camera" // This is required to register camera adapter
+	"github.com/pion/mediadevices/pkg/frame"
+	"github.com/pion/mediadevices/pkg/io/video"
+	"github.com/pion/mediadevices/pkg/prop"
+)
+
+func must(err error) {
+	if err != nil {
+		panic(err)
+	}
+}
+
+func main() {
+	if len(os.Args) != 2 {
+		fmt.Printf("usage: %s <path/to/file.h264>\n", os.Args[0])
+		return
+	}
+	dest := os.Args[1]
+
+	sigs := make(chan os.Signal, 1)
+	signal.Notify(sigs, syscall.SIGINT)
+
+	params, err := openh264.NewParams()
+	must(err)
+	params.BitRate = 1_000_000 // 1mbps
+
+	codecSelector := mediadevices.NewCodecSelector(
+		mediadevices.WithVideoEncoders(&params),
+	)
+
+	mediaStream, err := mediadevices.GetUserMedia(mediadevices.MediaStreamConstraints{
+		Video: func(c *mediadevices.MediaTrackConstraints) {
+			c.FrameFormat = prop.FrameFormat(frame.FormatI420)
+			c.Width = prop.Int(640)
+			c.Height = prop.Int(480)
+		},
+		Codec: codecSelector,
+	})
+	must(err)
+
+	videoTrack := mediaStream.GetVideoTracks()[0].(*mediadevices.VideoTrack)
+	defer videoTrack.Close()
+
+	videoTrack.Transform(video.TransformFunc(func(r video.Reader) video.Reader {
+		return video.ReaderFunc(func() (img image.Image, release func(), err error) {
+			// we send io.EOF signal to the encoder reader to stop reading. Therefore, io.Copy
+			// will finish its execution and the program will finish
+			select {
+			case <-sigs:
+				return nil, func() {}, io.EOF
+			default:
+			}
+
+			return r.Read()
+		})
+	}))
+
+	reader, err := videoTrack.NewEncodedIOReader(params.RTPCodec().MimeType)
+	must(err)
+	defer reader.Close()
+
+	out, err := os.Create(dest)
+	must(err)
+	fmt.Println("Recording... Press Ctrl+c to Set BitRate")
+	go func() {
+		_, err = io.Copy(out, reader)
+	}()
+	<-sigs
+	if control, ok := reader.(codec.Controllable); ok {
+		if ctrl, ok := control.Controller().(codec.KeyFrameController); ok {
+			fmt.Println("Force Key")
+			ctrl.ForceKeyFrame()
+		}
+		if ctrl, ok := control.Controller().(codec.BitRateController); ok {
+			fmt.Println("SetBitRate")
+			ctrl.SetBitRate(200_000)
+		}
+	}
+	fmt.Println("Recording... Press Ctrl+c to stop")
+	<-sigs
+	must(err)
+	fmt.Println("Your video has been recorded to", dest)
+}

examples/rtp/.gitignore

@@ -0,0 +1 @@
+rtp

examples/rtp/README.md

@@ -1,27 +1,35 @@
 ## Instructions
 
-### Download rtpexample
+### Install required codecs
+
+In this example, we'll be using x264 as our video codec. Therefore, we need to make sure that these codecs are installed within our system. 
+
+Installation steps:
+
+* [x264](https://github.com/pion/mediadevices#x264)
+
+### Download rtp example
 
 ```
-go get github.com/pion/mediadevices/examples/rtp
+git clone https://github.com/pion/mediadevices.git
 ```
 
 ### Listen RTP
 
 Install GStreamer and run:
 ```
-gst-launch-1.0 udpsrc port=5000 caps=application/x-rtp,encode-name=VP8 \
-    ! rtpvp8depay ! vp8dec ! videoconvert ! autovideosink
+gst-launch-1.0 udpsrc port=5000 caps=application/x-rtp,encode-name=H264 \
+    ! rtph264depay ! avdec_h264 ! videoconvert ! autovideosink
 ```
 
 Or run VLC media plyer:
 ```
-vlc ./vp8.sdp
+vlc ./h264.sdp
 ```
 
 ### Run rtp
 
-Run `rtp localhost:5000`
+Run `cd mediadevices/examples/archive && go build && ./rtp localhost:5000`
 
 A video should start playing in your GStreamer or VLC window.
 It's not WebRTC, but pure RTP.

examples/rtp/h264.sdp

@@ -6,4 +6,4 @@ c=IN IP4 0.0.0.0
 t=0 0
 a=recvonly
 m=video 5000 RTP/AVP 100
-a=rtpmap:100 VP8/90000
+a=rtpmap:100 H264/90000

examples/rtp/main.go

@@ -2,11 +2,12 @@ package main
 
 import (
 	"fmt"
+	"math/rand"
 	"net"
 	"os"
 
 	"github.com/pion/mediadevices"
-	"github.com/pion/mediadevices/pkg/codec/vpx"       // This is required to use VP8/VP9 video encoder
+	"github.com/pion/mediadevices/pkg/codec/x264"      // This is required to use H264 video encoder
 	_ "github.com/pion/mediadevices/pkg/driver/camera" // This is required to register camera adapter
 	"github.com/pion/mediadevices/pkg/frame"
 	"github.com/pion/mediadevices/pkg/prop"
@@ -29,17 +30,18 @@ func main() {
 	}
 	dest := os.Args[1]
 
-	vp8Params, err := vpx.NewVP8Params()
+	x264Params, err := x264.NewParams()
 	must(err)
-	vp8Params.BitRate = 100000 // 100kbps
+	x264Params.Preset = x264.PresetMedium
+	x264Params.BitRate = 1_000_000 // 1mbps
 
 	codecSelector := mediadevices.NewCodecSelector(
-		mediadevices.WithVideoEncoders(&vp8Params),
+		mediadevices.WithVideoEncoders(&x264Params),
 	)
 
 	mediaStream, err := mediadevices.GetUserMedia(mediadevices.MediaStreamConstraints{
 		Video: func(c *mediadevices.MediaTrackConstraints) {
-			c.FrameFormat = prop.FrameFormat(frame.FormatYUY2)
+			c.FrameFormat = prop.FrameFormat(frame.FormatI420)
 			c.Width = prop.Int(640)
 			c.Height = prop.Int(480)
 		},
@@ -50,7 +52,7 @@ func main() {
 	videoTrack := mediaStream.GetVideoTracks()[0]
 	defer videoTrack.Close()
 
-	rtpReader, err := videoTrack.NewRTPReader(vp8Params.RTPCodec().Name, mtu)
+	rtpReader, err := videoTrack.NewRTPReader(x264Params.RTPCodec().MimeType, rand.Uint32(), mtu)
 	must(err)
 
 	addr, err := net.ResolveUDPAddr("udp", dest)

examples/vnc/.gitignore

@@ -0,0 +1 @@
+vnc

examples/vnc/README.md

@@ -0,0 +1,46 @@
+## Instructions
+
+### Install required codecs
+
+In this example, we'll be using x264 and opus as our video and audio codecs. Therefore, we need to make sure that these codecs are installed within our system. 
+
+Installation steps:
+
+* [x264](https://github.com/pion/mediadevices#x264)
+
+### Download vnc example
+
+```
+git clone https://github.com/pion/mediadevices.git
+```
+
+#### Compile vnc example
+
+```
+cd mediadevices/examples/vnc && go build
+```
+
+### Open example page
+
+[jsfiddle.net](https://jsfiddle.net/gh/get/library/pure/pion/mediadevices/tree/master/examples/internal/jsfiddle/audio-and-video) you should see two text-areas and a 'Start Session' button
+
+### Run the webrtc example with your browsers SessionDescription as stdin
+
+In the jsfiddle the top textarea is your browser, copy that, and store the session description in an environment variable, `export SDP=<put_the_sdp_here>`
+
+Run `echo $SDP | ./vnc`
+
+In Windows
+
+```powershell
+type sdp.txt| .\vnc.exe
+```
+### Input webrtc's SessionDescription into your browser
+
+Copy the text that `./webrtc` just emitted and copy into second text area
+
+### Hit 'Start Session' in jsfiddle, enjoy your video!
+
+A video should start playing in your browser above the input boxes, and will continue playing until you close the application.
+
+Congrats, you have used pion-MediaDevices! Now start building something cool

examples/vnc/main.go

@@ -0,0 +1,127 @@
+package main
+
+import (
+	"fmt"
+
+	"github.com/pion/mediadevices/pkg/driver"
+	"github.com/pion/mediadevices/pkg/driver/vncdriver"
+
+	"github.com/pion/mediadevices"
+	"github.com/pion/mediadevices/examples/internal/signal"
+	"github.com/pion/webrtc/v4"
+
+	// If you don't like x264, you can also use vpx by importing as below
+	// "github.com/pion/mediadevices/pkg/codec/vpx" // This is required to use VP8/VP9 video encoder
+	// or you can also use openh264 for alternative h264 implementation
+	// "github.com/pion/mediadevices/pkg/codec/openh264"
+	// or if you use a raspberry pi like, you can use mmal for using its hardware encoder
+	// "github.com/pion/mediadevices/pkg/codec/mmal"
+	"github.com/pion/mediadevices/pkg/codec/x264" // This is required to use h264 video encoder
+	// Note: If you don't have a camera or microphone or your adapters are not supported,
+	//       you can always swap your adapters with our dummy adapters below.
+	// _ "github.com/pion/mediadevices/pkg/driver/videotest"
+	// _ "github.com/pion/mediadevices/pkg/driver/audiotest"
+)
+
+func main() {
+	config := webrtc.Configuration{
+		ICEServers: []webrtc.ICEServer{
+			{
+				URLs: []string{"stun:stun.l.google.com:19302"},
+			},
+		},
+	}
+	driver.GetManager().Register(
+		vncdriver.NewVnc("127.0.0.1:5900"),
+		driver.Info{Label: "VNC", DeviceType: driver.Camera, Priority: driver.PriorityLow},
+	)
+	// Wait for the offer to be pasted
+	offer := webrtc.SessionDescription{}
+	signal.Decode(signal.MustReadStdin(), &offer)
+
+	// Create a new RTCPeerConnection
+	x264Params, err := x264.NewParams()
+	if err != nil {
+		panic(err)
+	}
+	x264Params.BitRate = 500_000 // 500kbps
+
+	if err != nil {
+		panic(err)
+	}
+	codecSelector := mediadevices.NewCodecSelector(
+		mediadevices.WithVideoEncoders(&x264Params),
+	)
+
+	mediaEngine := webrtc.MediaEngine{}
+	codecSelector.Populate(&mediaEngine)
+	api := webrtc.NewAPI(webrtc.WithMediaEngine(&mediaEngine))
+	peerConnection, err := api.NewPeerConnection(config)
+	if err != nil {
+		panic(err)
+	}
+
+	// Set the handler for ICE connection state
+	// This will notify you when the peer has connected/disconnected
+	peerConnection.OnICEConnectionStateChange(func(connectionState webrtc.ICEConnectionState) {
+		fmt.Printf("Connection State has changed %s \n", connectionState.String())
+	})
+
+	s, err := mediadevices.GetUserMedia(mediadevices.MediaStreamConstraints{
+		Video: func(c *mediadevices.MediaTrackConstraints) {
+
+		},
+		Codec: codecSelector,
+	})
+	if err != nil {
+		panic(err)
+	}
+
+	for _, track := range s.GetTracks() {
+		track.OnEnded(func(err error) {
+			fmt.Printf("Track (ID: %s) ended with error: %v\n",
+				track.ID(), err)
+		})
+
+		_, err = peerConnection.AddTransceiverFromTrack(track,
+			webrtc.RTPTransceiverInit{
+				Direction: webrtc.RTPTransceiverDirectionSendonly,
+			},
+		)
+		if err != nil {
+			panic(err)
+		}
+	}
+
+	// Set the remote SessionDescription
+	err = peerConnection.SetRemoteDescription(offer)
+	if err != nil {
+		panic(err)
+	}
+
+	// Create an answer
+	answer, err := peerConnection.CreateAnswer(nil)
+	if err != nil {
+		panic(err)
+	}
+
+	// Create channel that is blocked until ICE Gathering is complete
+	gatherComplete := webrtc.GatheringCompletePromise(peerConnection)
+
+	// Sets the LocalDescription, and starts our UDP listeners
+	err = peerConnection.SetLocalDescription(answer)
+	if err != nil {
+		panic(err)
+	}
+
+	// Block until ICE Gathering is complete, disabling trickle ICE
+	// we do this because we only can exchange one signaling message
+	// in a production application you should exchange ICE Candidates via OnICECandidate
+	<-gatherComplete
+
+	// Output the answer in base64 so we can paste it in browser
+	fmt.Println(signal.Encode(*peerConnection.LocalDescription()))
+
+	// Block forever
+	select {}
+}

examples/webrtc/.gitignore

@@ -0,0 +1 @@
+webrtc

examples/webrtc/README.md

@@ -1,29 +1,42 @@
 ## Instructions
 
-### Download gstreamer-send
+### Install required codecs
+
+In this example, we'll be using x264 and opus as our video and audio codecs. Therefore, we need to make sure that these codecs are installed within our system. 
+
+Installation steps:
+
+* [x264](https://github.com/pion/mediadevices#x264)
+* [opus](https://github.com/pion/mediadevices#opus)
+
+### Download webrtc example
 
 ```
-go get github.com/pion/mediadevices/examples/webrtc
+git clone https://github.com/pion/mediadevices.git
+```
+
+#### Compile webrtc example
+
+```
+cd mediadevices/examples/webrtc && go build
 ```
 
 ### Open example page
 
 [jsfiddle.net](https://jsfiddle.net/gh/get/library/pure/pion/mediadevices/tree/master/examples/internal/jsfiddle/audio-and-video) you should see two text-areas and a 'Start Session' button
 
-### Run webrtc with your browsers SessionDescription as stdin
+### Run the webrtc example with your browsers SessionDescription as stdin
 
-In the jsfiddle the top textarea is your browser, copy that and:
+In the jsfiddle the top textarea is your browser, copy that, and store the session description in an environment variable, `export SDP=<put_the_sdp_here>`
 
-#### Linux
-
-Run `echo $BROWSER_SDP | webrtc`
+Run `echo $SDP | ./webrtc`
 
 ### Input webrtc's SessionDescription into your browser
 
-Copy the text that `webrtc` just emitted and copy into second text area
+Copy the text that `./webrtc` just emitted and copy into second text area
 
 ### Hit 'Start Session' in jsfiddle, enjoy your video!
 
 A video should start playing in your browser above the input boxes, and will continue playing until you close the application.
 
-Congrats, you have used pion-WebRTC! Now start building something cool
+Congrats, you have used pion-MediaDevices! Now start building something cool

examples/webrtc/main.go

@@ -7,7 +7,7 @@ import (
 	"github.com/pion/mediadevices/examples/internal/signal"
 	"github.com/pion/mediadevices/pkg/frame"
 	"github.com/pion/mediadevices/pkg/prop"
-	"github.com/pion/webrtc/v2"
+	"github.com/pion/webrtc/v4"
 
 	// If you don't like x264, you can also use vpx by importing as below
 	// "github.com/pion/mediadevices/pkg/codec/vpx" // This is required to use VP8/VP9 video encoder
@@ -26,10 +26,6 @@ import (
 	_ "github.com/pion/mediadevices/pkg/driver/microphone" // This is required to register microphone adapter
 )
 
-const (
-	videoCodecName = webrtc.VP8
-)
-
 func main() {
 	config := webrtc.Configuration{
 		ICEServers: []webrtc.ICEServer{
@@ -61,10 +57,7 @@ func main() {
 
 	mediaEngine := webrtc.MediaEngine{}
 	codecSelector.Populate(&mediaEngine)
-	if err := mediaEngine.PopulateFromSDP(offer); err != nil {
-		panic(err)
-	}
-	api := webrtc.NewAPI(webrtc.WithMediaEngine(mediaEngine))
+	api := webrtc.NewAPI(webrtc.WithMediaEngine(&mediaEngine))
 	peerConnection, err := api.NewPeerConnection(config)
 	if err != nil {
 		panic(err)
@@ -78,7 +71,7 @@ func main() {
 
 	s, err := mediadevices.GetUserMedia(mediadevices.MediaStreamConstraints{
 		Video: func(c *mediadevices.MediaTrackConstraints) {
-			c.FrameFormat = prop.FrameFormat(frame.FormatYUY2)
+			c.FrameFormat = prop.FrameFormat(frame.FormatI420)
 			c.Width = prop.Int(640)
 			c.Height = prop.Int(480)
 		},
@@ -90,20 +83,14 @@ func main() {
 		panic(err)
 	}
 
-	for _, tracker := range s.GetTracks() {
-		tracker.OnEnded(func(err error) {
+	for _, track := range s.GetTracks() {
+		track.OnEnded(func(err error) {
 			fmt.Printf("Track (ID: %s) ended with error: %v\n",
-				tracker.ID(), err)
+				track.ID(), err)
 		})
 
-		// In Pion/webrtc v3, bind will be called automatically after SDP negotiation
-		webrtcTrack, err := tracker.Bind(peerConnection)
-		if err != nil {
-			panic(err)
-		}
-
-		_, err = peerConnection.AddTransceiverFromTrack(webrtcTrack,
-			webrtc.RtpTransceiverInit{
+		_, err = peerConnection.AddTransceiverFromTrack(track,
+			webrtc.RTPTransceiverInit{
 				Direction: webrtc.RTPTransceiverDirectionSendonly,
 			},
 		)
@@ -124,13 +111,23 @@ func main() {
 		panic(err)
 	}
 
+	// Create channel that is blocked until ICE Gathering is complete
+	gatherComplete := webrtc.GatheringCompletePromise(peerConnection)
+
 	// Sets the LocalDescription, and starts our UDP listeners
 	err = peerConnection.SetLocalDescription(answer)
 	if err != nil {
 		panic(err)
 	}
 
+	// Block until ICE Gathering is complete, disabling trickle ICE
+	// we do this because we only can exchange one signaling message
+	// in a production application you should exchange ICE Candidates via OnICECandidate
+	<-gatherComplete
+
 	// Output the answer in base64 so we can paste it in browser
-	fmt.Println(signal.Encode(answer))
+	fmt.Println(signal.Encode(*peerConnection.LocalDescription()))
+
+	// Block forever
 	select {}
 }

go.mod

@@ -1,15 +1,43 @@
 module github.com/pion/mediadevices
 
-go 1.13
+go 1.21
 
 require (
-	github.com/blackjack/webcam v0.0.0-20200313125108-10ed912a8539
-	github.com/gen2brain/malgo v0.10.19
-	github.com/lherman-cs/opus v0.0.2
-	github.com/pion/logging v0.2.2
-	github.com/pion/rtp v1.6.0
-	github.com/pion/webrtc/v2 v2.2.26
-	github.com/satori/go.uuid v1.2.0
-	golang.org/x/image v0.0.0-20200927104501-e162460cd6b5
-	golang.org/x/sys v0.0.0-20201029080932-201ba4db2418 // indirect
+	github.com/blackjack/webcam v0.6.1
+	github.com/gen2brain/malgo v0.11.23
+	github.com/google/uuid v1.6.0
+	github.com/kbinani/screenshot v0.0.0-20250624051815-089614a94018
+	github.com/pion/interceptor v0.1.40
+	github.com/pion/logging v0.2.4
+	github.com/pion/rtcp v1.2.15
+	github.com/pion/rtp v1.8.21
+	github.com/pion/webrtc/v4 v4.1.4
+	github.com/stretchr/testify v1.11.1
+	golang.org/x/image v0.23.0
+)
+
+require (
+	github.com/davecgh/go-spew v1.1.1 // indirect
+	github.com/gen2brain/shm v0.1.0 // indirect
+	github.com/godbus/dbus/v5 v5.1.0 // indirect
+	github.com/jezek/xgb v1.1.1 // indirect
+	github.com/lxn/win v0.0.0-20210218163916-a377121e959e // indirect
+	github.com/pion/datachannel v1.5.10 // indirect
+	github.com/pion/dtls/v3 v3.0.7 // indirect
+	github.com/pion/ice/v4 v4.0.10 // indirect
+	github.com/pion/mdns/v2 v2.0.7 // indirect
+	github.com/pion/randutil v0.1.0 // indirect
+	github.com/pion/sctp v1.8.39 // indirect
+	github.com/pion/sdp/v3 v3.0.15 // indirect
+	github.com/pion/srtp/v3 v3.0.7 // indirect
+	github.com/pion/stun/v3 v3.0.0 // indirect
+	github.com/pion/transport/v3 v3.0.7 // indirect
+	github.com/pion/turn/v4 v4.1.1 // indirect
+	github.com/pmezard/go-difflib v1.0.0 // indirect
+	github.com/wlynxg/anet v0.0.5 // indirect
+	golang.org/x/crypto v0.33.0 // indirect
+	golang.org/x/net v0.35.0 // indirect
+	golang.org/x/sys v0.30.0 // indirect
+	gopkg.in/check.v1 v1.0.0-20201130134442-10cb98267c6c // indirect
+	gopkg.in/yaml.v3 v3.0.1 // indirect
 )

go.sum

@@ -1,129 +1,76 @@
-github.com/blackjack/webcam v0.0.0-20200313125108-10ed912a8539 h1:1aIqYfg9s9RETAJHGfVKZW4ok0b22p4QTwk8MsdRtPs=
-github.com/blackjack/webcam v0.0.0-20200313125108-10ed912a8539/go.mod h1:G0X+rEqYPWSq0dG8OMf8M446MtKytzpPjgS3HbdOJZ4=
-github.com/cheekybits/genny v1.0.0 h1:uGGa4nei+j20rOSeDeP5Of12XVm7TGUd4dJA9RDitfE=
-github.com/cheekybits/genny v1.0.0/go.mod h1:+tQajlRqAUrPI7DOSpB0XAqZYtQakVtB7wXkRAgjxjQ=
-github.com/davecgh/go-spew v1.1.0/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
+github.com/blackjack/webcam v0.6.1 h1:K0T6Q0zto23U99gNAa5q/hFoye6uGcKr2aE6hFoxVoE=
+github.com/blackjack/webcam v0.6.1/go.mod h1:zs+RkUZzqpFPHPiwBZ6U5B34ZXXe9i+SiHLKnnukJuI=
 github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
 github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
-github.com/fsnotify/fsnotify v1.4.7 h1:IXs+QLmnXW2CcXuY+8Mzv/fWEsPGWxqefPtCP5CnV9I=
-github.com/fsnotify/fsnotify v1.4.7/go.mod h1:jwhsz4b93w/PPRr/qN1Yymfu8t87LnFCMoQvtojpjFo=
-github.com/gen2brain/malgo v0.10.19 h1:IUVF6WdVV7Txt47Kx2ajz0rWQ0MU0zO+tbcKmhva7l8=
-github.com/gen2brain/malgo v0.10.19/go.mod h1:zHSUNZAXfCeNsZou0RtQ6Zk7gDYLIcKOrUWtAdksnEs=
-github.com/golang/mock v1.2.0 h1:28o5sBqPkBsMGnC6b4MvE2TzSr5/AT4c/1fLqVGIwlk=
-github.com/golang/mock v1.2.0/go.mod h1:oTYuIxOrZwtPieC+H1uAHpcLFnEyAGVDL/k47Jfbm0A=
-github.com/golang/protobuf v1.2.0 h1:P3YflyNX/ehuJFLhxviNdFxQPkGK5cDcApsge1SqnvM=
-github.com/golang/protobuf v1.2.0/go.mod h1:6lQm79b+lXiMfvg/cZm0SGofjICqVBUtrP5yJMmIC1U=
-github.com/google/uuid v1.1.1 h1:Gkbcsh/GbpXz7lPftLA3P6TYMwjCLYm83jiFQZF/3gY=
-github.com/google/uuid v1.1.1/go.mod h1:TIyPZe4MgqvfeYDBFedMoGGpEw/LqOeaOT+nhxU+yHo=
-github.com/hpcloud/tail v1.0.0 h1:nfCOvKYfkgYP8hkirhJocXT2+zOD8yUNjXaWfTlyFKI=
-github.com/hpcloud/tail v1.0.0/go.mod h1:ab1qPbhIpdTxEkNHXyeSf5vhxWSCs/tWer42PpOxQnU=
-github.com/kr/pretty v0.1.0 h1:L/CwN0zerZDmRFUapSPitk6f+Q3+0za1rQkzVuMiMFI=
-github.com/kr/pretty v0.1.0/go.mod h1:dAy3ld7l9f0ibDNOQOHHMYYIIbhfbHSm3C4ZsoJORNo=
+github.com/gen2brain/malgo v0.11.23 h1:3/VAI8DP9/Wyx1CUDNlUQJVdWUvGErhjHDqYcHVk9ME=
+github.com/gen2brain/malgo v0.11.23/go.mod h1:f9TtuN7DVrXMiV/yIceMeWpvanyVzJQMlBecJFVMxww=
+github.com/gen2brain/shm v0.1.0 h1:MwPeg+zJQXN0RM9o+HqaSFypNoNEcNpeoGp0BTSx2YY=
+github.com/gen2brain/shm v0.1.0/go.mod h1:UgIcVtvmOu+aCJpqJX7GOtiN7X2ct+TKLg4RTxwPIUA=
+github.com/godbus/dbus/v5 v5.1.0 h1:4KLkAxT3aOY8Li4FRJe/KvhoNFFxo0m6fNuFUO8QJUk=
+github.com/godbus/dbus/v5 v5.1.0/go.mod h1:xhWf0FNVPg57R7Z0UbKHbJfkEywrmjJnf7w5xrFpKfA=
+github.com/google/uuid v1.6.0 h1:NIvaJDMOsjHA8n1jAhLSgzrAzy1Hgr+hNrb57e+94F0=
+github.com/google/uuid v1.6.0/go.mod h1:TIyPZe4MgqvfeYDBFedMoGGpEw/LqOeaOT+nhxU+yHo=
+github.com/jezek/xgb v1.1.1 h1:bE/r8ZZtSv7l9gk6nU0mYx51aXrvnyb44892TwSaqS4=
+github.com/jezek/xgb v1.1.1/go.mod h1:nrhwO0FX/enq75I7Y7G8iN1ubpSGZEiA3v9e9GyRFlk=
+github.com/kbinani/screenshot v0.0.0-20250624051815-089614a94018 h1:NQYgMY188uWrS+E/7xMVpydsI48PMHcc7SfR4OxkDF4=
+github.com/kbinani/screenshot v0.0.0-20250624051815-089614a94018/go.mod h1:Pmpz2BLf55auQZ67u3rvyI2vAQvNetkK/4zYUmpauZQ=
+github.com/kr/pretty v0.2.1 h1:Fmg33tUaq4/8ym9TJN1x7sLJnHVwhP33CNkpYV/7rwI=
+github.com/kr/pretty v0.2.1/go.mod h1:ipq/a2n7PKx3OHsz4KJII5eveXtPO4qwEXGdVfWzfnI=
 github.com/kr/pty v1.1.1/go.mod h1:pFQYn66WHrOpPYNljwOMqo10TkYh1fy3cYio2l3bCsQ=
-github.com/kr/text v0.1.0 h1:45sCR5RtlFHMR4UwH9sdQ5TC8v0qDQCHnXt+kaKSTVE=
 github.com/kr/text v0.1.0/go.mod h1:4Jbv+DJW3UT/LiOwJeYQe1efqtUx/iVham/4vfdArNI=
-github.com/lherman-cs/opus v0.0.2 h1:fE9Du3NKXDBztqvoTd6P2y9eJ9vgIHahGK8yQostnhA=
-github.com/lherman-cs/opus v0.0.2/go.mod h1:v9KQvlDYMuvlwniumBVMlrB0VHQvyTgxNvaXjPmTmps=
-github.com/lucas-clemente/quic-go v0.7.1-0.20190401152353-907071221cf9 h1:tbuodUh2vuhOVZAdW3NEUvosFHUMJwUNl7jk/VSEiwc=
-github.com/lucas-clemente/quic-go v0.7.1-0.20190401152353-907071221cf9/go.mod h1:PpMmPfPKO9nKJ/psF49ESTAGQSdfXxlg1otPbEB2nOw=
-github.com/marten-seemann/qtls v0.2.3 h1:0yWJ43C62LsZt08vuQJDK1uC1czUc3FJeCLPoNAI4vA=
-github.com/marten-seemann/qtls v0.2.3/go.mod h1:xzjG7avBwGGbdZ8dTGxlBnLArsVKLvwmjgmPuiQEcYk=
-github.com/onsi/ginkgo v1.6.0/go.mod h1:lLunBs/Ym6LB5Z9jYTR76FiuTmxDTDusOGeTQH+WWjE=
-github.com/onsi/ginkgo v1.7.0 h1:WSHQ+IS43OoUrWtD1/bbclrwK8TTH5hzp+umCiuxHgs=
-github.com/onsi/ginkgo v1.7.0/go.mod h1:lLunBs/Ym6LB5Z9jYTR76FiuTmxDTDusOGeTQH+WWjE=
-github.com/onsi/gomega v1.4.3 h1:RE1xgDvH7imwFD45h+u2SgIfERHlS2yNG4DObb5BSKU=
-github.com/onsi/gomega v1.4.3/go.mod h1:ex+gbHU/CVuBBDIJjb2X0qEXbFg53c61hWP/1CpauHY=
-github.com/pion/datachannel v1.4.21 h1:3ZvhNyfmxsAqltQrApLPQMhSFNA+aT87RqyCq4OXmf0=
-github.com/pion/datachannel v1.4.21/go.mod h1:oiNyP4gHx2DIwRzX/MFyH0Rz/Gz05OgBlayAI2hAWjg=
-github.com/pion/dtls/v2 v2.0.1/go.mod h1:uMQkz2W0cSqY00xav7WByQ4Hb+18xeQh2oH2fRezr5U=
-github.com/pion/dtls/v2 v2.0.2 h1:FHCHTiM182Y8e15aFTiORroiATUI16ryHiQh8AIOJ1E=
-github.com/pion/dtls/v2 v2.0.2/go.mod h1:27PEO3MDdaCfo21heT59/vsdmZc0zMt9wQPcSlLu/1I=
-github.com/pion/ice v0.7.18 h1:KbAWlzWRUdX9SmehBh3gYpIFsirjhSQsCw6K2MjYMK0=
-github.com/pion/ice v0.7.18/go.mod h1:+Bvnm3nYC6Nnp7VV6glUkuOfToB/AtMRZpOU8ihuf4c=
-github.com/pion/logging v0.2.2 h1:M9+AIj/+pxNsDfAT64+MAVgJO0rsyLnoJKCqf//DoeY=
-github.com/pion/logging v0.2.2/go.mod h1:k0/tDVsRCX2Mb2ZEmTqNa7CWsQPc+YYCB7Q+5pahoms=
-github.com/pion/mdns v0.0.4 h1:O4vvVqr4DGX63vzmO6Fw9vpy3lfztVWHGCQfyw0ZLSY=
-github.com/pion/mdns v0.0.4/go.mod h1:R1sL0p50l42S5lJs91oNdUL58nm0QHrhxnSegr++qC0=
-github.com/pion/quic v0.1.1 h1:D951FV+TOqI9A0rTF7tHx0Loooqz+nyzjEyj8o3PuMA=
-github.com/pion/quic v0.1.1/go.mod h1:zEU51v7ru8Mp4AUBJvj6psrSth5eEFNnVQK5K48oV3k=
-github.com/pion/randutil v0.0.0/go.mod h1:XcJrSMMbbMRhASFVOlj/5hQial/Y8oH/HVo7TBZq+j8=
+github.com/kr/text v0.2.0 h1:5Nx0Ya0ZqY2ygV366QzturHI13Jq95ApcVaJBhpS+AY=
+github.com/kr/text v0.2.0/go.mod h1:eLer722TekiGuMkidMxC/pM04lWEeraHUUmBw8l2grE=
+github.com/lxn/win v0.0.0-20210218163916-a377121e959e h1:H+t6A/QJMbhCSEH5rAuRxh+CtW96g0Or0Fxa9IKr4uc=
+github.com/lxn/win v0.0.0-20210218163916-a377121e959e/go.mod h1:KxxjdtRkfNoYDCUP5ryK7XJJNTnpC8atvtmTheChOtk=
+github.com/pion/datachannel v1.5.10 h1:ly0Q26K1i6ZkGf42W7D4hQYR90pZwzFOjTq5AuCKk4o=
+github.com/pion/datachannel v1.5.10/go.mod h1:p/jJfC9arb29W7WrxyKbepTU20CFgyx5oLo8Rs4Py/M=
+github.com/pion/dtls/v3 v3.0.7 h1:bItXtTYYhZwkPFk4t1n3Kkf5TDrfj6+4wG+CZR8uI9Q=
+github.com/pion/dtls/v3 v3.0.7/go.mod h1:uDlH5VPrgOQIw59irKYkMudSFprY9IEFCqz/eTz16f8=
+github.com/pion/ice/v4 v4.0.10 h1:P59w1iauC/wPk9PdY8Vjl4fOFL5B+USq1+xbDcN6gT4=
+github.com/pion/ice/v4 v4.0.10/go.mod h1:y3M18aPhIxLlcO/4dn9X8LzLLSma84cx6emMSu14FGw=
+github.com/pion/interceptor v0.1.40 h1:e0BjnPcGpr2CFQgKhrQisBU7V3GXK6wrfYrGYaU6Jq4=
+github.com/pion/interceptor v0.1.40/go.mod h1:Z6kqH7M/FYirg3frjGJ21VLSRJGBXB/KqaTIrdqnOic=
+github.com/pion/logging v0.2.4 h1:tTew+7cmQ+Mc1pTBLKH2puKsOvhm32dROumOZ655zB8=
+github.com/pion/logging v0.2.4/go.mod h1:DffhXTKYdNZU+KtJ5pyQDjvOAh/GsNSyv1lbkFbe3so=
+github.com/pion/mdns/v2 v2.0.7 h1:c9kM8ewCgjslaAmicYMFQIde2H9/lrZpjBkN8VwoVtM=
+github.com/pion/mdns/v2 v2.0.7/go.mod h1:vAdSYNAT0Jy3Ru0zl2YiW3Rm/fJCwIeM0nToenfOJKA=
 github.com/pion/randutil v0.1.0 h1:CFG1UdESneORglEsnimhUjf33Rwjubwj6xfiOXBa3mA=
 github.com/pion/randutil v0.1.0/go.mod h1:XcJrSMMbbMRhASFVOlj/5hQial/Y8oH/HVo7TBZq+j8=
-github.com/pion/rtcp v1.2.3 h1:2wrhKnqgSz91Q5nzYTO07mQXztYPtxL8a0XOss4rJqA=
-github.com/pion/rtcp v1.2.3/go.mod h1:zGhIv0RPRF0Z1Wiij22pUt5W/c9fevqSzT4jje/oK7I=
-github.com/pion/rtp v1.6.0 h1:4Ssnl/T5W2LzxHj9ssYpGVEQh3YYhQFNVmSWO88MMwk=
-github.com/pion/rtp v1.6.0/go.mod h1:QgfogHsMBVE/RFNno467U/KBqfUywEH+HK+0rtnwsdI=
-github.com/pion/sctp v1.7.10 h1:o3p3/hZB5Cx12RMGyWmItevJtZ6o2cpuxaw6GOS4x+8=
-github.com/pion/sctp v1.7.10/go.mod h1:EhpTUQu1/lcK3xI+eriS6/96fWetHGCvBi9MSsnaBN0=
-github.com/pion/sdp/v2 v2.4.0 h1:luUtaETR5x2KNNpvEMv/r4Y+/kzImzbz4Lm1z8eQNQI=
-github.com/pion/sdp/v2 v2.4.0/go.mod h1:L2LxrOpSTJbAns244vfPChbciR/ReU1KWfG04OpkR7E=
-github.com/pion/srtp v1.5.1 h1:9Q3jAfslYZBt+C69SI/ZcONJh9049JUHZWYRRf5KEKw=
-github.com/pion/srtp v1.5.1/go.mod h1:B+QgX5xPeQTNc1CJStJPHzOlHK66ViMDWTT0HZTCkcA=
-github.com/pion/stun v0.3.5 h1:uLUCBCkQby4S1cf6CGuR9QrVOKcvUwFeemaC865QHDg=
-github.com/pion/stun v0.3.5/go.mod h1:gDMim+47EeEtfWogA37n6qXZS88L5V6LqFcf+DZA2UA=
-github.com/pion/transport v0.6.0/go.mod h1:iWZ07doqOosSLMhZ+FXUTq+TamDoXSllxpbGcfkCmbE=
-github.com/pion/transport v0.8.10/go.mod h1:tBmha/UCjpum5hqTWhfAEs3CO4/tHSg0MYRhSzR+CZ8=
-github.com/pion/transport v0.10.0/go.mod h1:BnHnUipd0rZQyTVB2SBGojFHT9CBt5C5TcsJSQGkvSE=
-github.com/pion/transport v0.10.1 h1:2W+yJT+0mOQ160ThZYUx5Zp2skzshiNgxrNE9GUfhJM=
-github.com/pion/transport v0.10.1/go.mod h1:PBis1stIILMiis0PewDw91WJeLJkyIMcEk+DwKOzf4A=
-github.com/pion/turn/v2 v2.0.4 h1:oDguhEv2L/4rxwbL9clGLgtzQPjtuZwCdoM7Te8vQVk=
-github.com/pion/turn/v2 v2.0.4/go.mod h1:1812p4DcGVbYVBTiraUmP50XoKye++AMkbfp+N27mog=
-github.com/pion/udp v0.1.0 h1:uGxQsNyrqG3GLINv36Ff60covYmfrLoxzwnCsIYspXI=
-github.com/pion/udp v0.1.0/go.mod h1:BPELIjbwE9PRbd/zxI/KYBnbo7B6+oA6YuEaNE8lths=
-github.com/pion/webrtc/v2 v2.2.26 h1:01hWE26pL3LgqfxvQ1fr6O4ZtyRFFJmQEZK39pHWfFc=
-github.com/pion/webrtc/v2 v2.2.26/go.mod h1:XMZbZRNHyPDe1gzTIHFcQu02283YO45CbiwFgKvXnmc=
-github.com/pkg/errors v0.9.1 h1:FEBLx1zS214owpjy7qsBeixbURkuhQAwrK5UwLGTwt4=
-github.com/pkg/errors v0.9.1/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=
+github.com/pion/rtcp v1.2.15 h1:LZQi2JbdipLOj4eBjK4wlVoQWfrZbh3Q6eHtWtJBZBo=
+github.com/pion/rtcp v1.2.15/go.mod h1:jlGuAjHMEXwMUHK78RgX0UmEJFV4zUKOFHR7OP+D3D0=
+github.com/pion/rtp v1.8.21 h1:3yrOwmZFyUpcIosNcWRpQaU+UXIJ6yxLuJ8Bx0mw37Y=
+github.com/pion/rtp v1.8.21/go.mod h1:bAu2UFKScgzyFqvUKmbvzSdPr+NGbZtv6UB2hesqXBk=
+github.com/pion/sctp v1.8.39 h1:PJma40vRHa3UTO3C4MyeJDQ+KIobVYRZQZ0Nt7SjQnE=
+github.com/pion/sctp v1.8.39/go.mod h1:cNiLdchXra8fHQwmIoqw0MbLLMs+f7uQ+dGMG2gWebE=
+github.com/pion/sdp/v3 v3.0.15 h1:F0I1zds+K/+37ZrzdADmx2Q44OFDOPRLhPnNTaUX9hk=
+github.com/pion/sdp/v3 v3.0.15/go.mod h1:88GMahN5xnScv1hIMTqLdu/cOcUkj6a9ytbncwMCq2E=
+github.com/pion/srtp/v3 v3.0.7 h1:QUElw0A/FUg3MP8/KNMZB3i0m8F9XeMnTum86F7S4bs=
+github.com/pion/srtp/v3 v3.0.7/go.mod h1:qvnHeqbhT7kDdB+OGB05KA/P067G3mm7XBfLaLiaNF0=
+github.com/pion/stun/v3 v3.0.0 h1:4h1gwhWLWuZWOJIJR9s2ferRO+W3zA/b6ijOI6mKzUw=
+github.com/pion/stun/v3 v3.0.0/go.mod h1:HvCN8txt8mwi4FBvS3EmDghW6aQJ24T+y+1TKjB5jyU=
+github.com/pion/transport/v3 v3.0.7 h1:iRbMH05BzSNwhILHoBoAPxoB9xQgOaJk+591KC9P1o0=
+github.com/pion/transport/v3 v3.0.7/go.mod h1:YleKiTZ4vqNxVwh77Z0zytYi7rXHl7j6uPLGhhz9rwo=
+github.com/pion/turn/v4 v4.1.1 h1:9UnY2HB99tpDyz3cVVZguSxcqkJ1DsTSZ+8TGruh4fc=
+github.com/pion/turn/v4 v4.1.1/go.mod h1:2123tHk1O++vmjI5VSD0awT50NywDAq5A2NNNU4Jjs8=
+github.com/pion/webrtc/v4 v4.1.4 h1:/gK1ACGHXQmtyVVbJFQDxNoODg4eSRiFLB7t9r9pg8M=
+github.com/pion/webrtc/v4 v4.1.4/go.mod h1:Oab9npu1iZtQRMic3K3toYq5zFPvToe/QBw7dMI2ok4=
 github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
 github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
-github.com/satori/go.uuid v1.2.0 h1:0uYX9dsZ2yD7q2RtLRtPSdGDWzjeM3TbMJP9utgA0ww=
-github.com/satori/go.uuid v1.2.0/go.mod h1:dA0hQrYB0VpLJoorglMZABFdXlWrHn1NEOzdhQKdks0=
-github.com/sclevine/agouti v3.0.0+incompatible/go.mod h1:b4WX9W9L1sfQKXeJf1mUTLZKJ48R1S7H23Ji7oFO5Bw=
-github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
-github.com/stretchr/testify v1.3.0/go.mod h1:M5WIy9Dh21IEIfnGCwXGc5bZfKNJtfHm1UVUgZn+9EI=
-github.com/stretchr/testify v1.4.0/go.mod h1:j7eGeouHqKxXV5pUuKE4zz7dFj8WfuZ+81PSLYec5m4=
-github.com/stretchr/testify v1.5.1/go.mod h1:5W2xD1RspED5o8YsWQXVCued0rvSQ+mT+I5cxcmMvtA=
-github.com/stretchr/testify v1.6.1 h1:hDPOHmpOpP40lSULcqw7IrRb/u7w6RpDC9399XyoNd0=
-github.com/stretchr/testify v1.6.1/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/h/Wwjteg=
-golang.org/x/crypto v0.0.0-20190228161510-8dd112bcdc25/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
-golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
-golang.org/x/crypto v0.0.0-20200602180216-279210d13fed/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/crypto v0.0.0-20200622213623-75b288015ac9/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/crypto v0.0.0-20200709230013-948cd5f35899 h1:DZhuSZLsGlFL4CmhA8BcRA0mnthyA/nZ00AqCUo7vHg=
-golang.org/x/crypto v0.0.0-20200709230013-948cd5f35899/go.mod h1:LzIPMQfyMNhhGPhUkYOs5KpL4U8rLKemX1yGLhDgUto=
-golang.org/x/image v0.0.0-20200927104501-e162460cd6b5 h1:QelT11PB4FXiDEXucrfNckHoFxwt8USGY1ajP1ZF5lM=
-golang.org/x/image v0.0.0-20200927104501-e162460cd6b5/go.mod h1:FeLwcggjj3mMvU+oOTbSwawSJRM1uh48EjtB4UJZlP0=
-golang.org/x/net v0.0.0-20180906233101-161cd47e91fd/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
-golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
-golang.org/x/net v0.0.0-20191126235420-ef20fe5d7933/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
-golang.org/x/net v0.0.0-20200226121028-0de0cce0169b/go.mod h1:z5CRVTTTmAJ677TzLLGU+0bjPO0LkuOLi4/5GtJWs/s=
-golang.org/x/net v0.0.0-20200602114024-627f9648deb9/go.mod h1:qpuaurCH72eLCgpAm/N6yyVIVM9cpaDIP3A8BGJEC5A=
-golang.org/x/net v0.0.0-20200625001655-4c5254603344/go.mod h1:/O7V0waA8r7cgGh81Ro3o1hOxt32SMVPicZroKQ2sZA=
-golang.org/x/net v0.0.0-20200707034311-ab3426394381 h1:VXak5I6aEWmAXeQjA+QSZzlgNrpq9mjcfDemuexIKsU=
-golang.org/x/net v0.0.0-20200707034311-ab3426394381/go.mod h1:/O7V0waA8r7cgGh81Ro3o1hOxt32SMVPicZroKQ2sZA=
-golang.org/x/sync v0.0.0-20180314180146-1d60e4601c6f h1:wMNYb4v58l5UBM7MYRLPG6ZhfOqbKu7X5eyFl8ZhKvA=
-golang.org/x/sync v0.0.0-20180314180146-1d60e4601c6f/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
-golang.org/x/sys v0.0.0-20180909124046-d0be0721c37e/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
-golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
-golang.org/x/sys v0.0.0-20190228124157-a34e9553db1e/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
-golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20200323222414-85ca7c5b95cd/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20200724161237-0e2f3a69832c/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/sys v0.0.0-20201029080932-201ba4db2418 h1:HlFl4V6pEMziuLXyRkm5BIYq1y1GAbb02pRlWvI54OM=
-golang.org/x/sys v0.0.0-20201029080932-201ba4db2418/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
-golang.org/x/text v0.3.0 h1:g61tztE5qeGQ89tm6NTjjM9VPIm088od1l6aSorWRWg=
-golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
-golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543 h1:E7g+9GITq07hpfrRu66IVDexMakfv52eLZ2CXBWiKr4=
-golang.org/x/xerrors v0.0.0-20191204190536-9bdfabe68543/go.mod h1:I/5z698sn9Ka8TeJc9MKroUUfqBBauWjQqLJ2OPfmY0=
+github.com/stretchr/testify v1.11.1 h1:7s2iGBzp5EwR7/aIZr8ao5+dra3wiQyKjjFuvgVKu7U=
+github.com/stretchr/testify v1.11.1/go.mod h1:wZwfW3scLgRK+23gO65QZefKpKQRnfz6sD981Nm4B6U=
+github.com/wlynxg/anet v0.0.5 h1:J3VJGi1gvo0JwZ/P1/Yc/8p63SoW98B5dHkYDmpgvvU=
+github.com/wlynxg/anet v0.0.5/go.mod h1:eay5PRQr7fIVAMbTbchTnO9gG65Hg/uYGdc7mguHxoA=
+golang.org/x/crypto v0.33.0 h1:IOBPskki6Lysi0lo9qQvbxiQ+FvsCC/YWOecCHAixus=
+golang.org/x/crypto v0.33.0/go.mod h1:bVdXmD7IV/4GdElGPozy6U7lWdRXA4qyRVGJV57uQ5M=
+golang.org/x/image v0.23.0 h1:HseQ7c2OpPKTPVzNjG5fwJsOTCiiwS4QdsYi5XU6H68=
+golang.org/x/image v0.23.0/go.mod h1:wJJBTdLfCCf3tiHa1fNxpZmUI4mmoZvwMCPP0ddoNKY=
+golang.org/x/net v0.35.0 h1:T5GQRQb2y08kTAByq9L4/bz8cipCdA8FbRTXewonqY8=
+golang.org/x/net v0.35.0/go.mod h1:EglIi67kWsHKlRzzVMUD93VMSWGFOMSZgxFjparz1Qk=
+golang.org/x/sys v0.0.0-20201018230417-eeed37f84f13/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.30.0 h1:QjkSwP/36a20jFYWkSue1YwXzLmsV5Gfq7Eiy72C1uc=
+golang.org/x/sys v0.30.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
-gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15 h1:YR8cESwS4TdDjEe65xsg0ogRM/Nc3DYOhEAlW+xobZo=
-gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
-gopkg.in/fsnotify.v1 v1.4.7 h1:xOHLXZwVvI9hhs+cLKq5+I5onOuwQLhQwiu63xxlHs4=
-gopkg.in/fsnotify.v1 v1.4.7/go.mod h1:Tz8NjZHkW78fSQdbUxIjBTcgA1z1m8ZHf0WmKUhAMys=
-gopkg.in/tomb.v1 v1.0.0-20141024135613-dd632973f1e7 h1:uRGJdciOHaEIrze2W8Q3AKkepLTh2hOroT7a+7czfdQ=
-gopkg.in/tomb.v1 v1.0.0-20141024135613-dd632973f1e7/go.mod h1:dt/ZhP58zS4L8KSrWDmTeBkI65Dw0HsyUHuEVlX15mw=
-gopkg.in/yaml.v2 v2.2.1/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
-gopkg.in/yaml.v2 v2.2.2 h1:ZCJp+EgiOT7lHqUV2J862kp8Qj64Jo6az82+3Td9dZw=
-gopkg.in/yaml.v2 v2.2.2/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
-gopkg.in/yaml.v3 v3.0.0-20200313102051-9f266ea9e77c h1:dUUwHk2QECo/6vqA44rthZ8ie2QXMNeKRTHCNY2nXvo=
-gopkg.in/yaml.v3 v3.0.0-20200313102051-9f266ea9e77c/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
+gopkg.in/check.v1 v1.0.0-20201130134442-10cb98267c6c h1:Hei/4ADfdWqJk1ZMxUNpqntNwaWcugrBjAiHlqqRiVk=
+gopkg.in/check.v1 v1.0.0-20201130134442-10cb98267c6c/go.mod h1:JHkPIbrfpd72SG/EVd6muEfDQjcINNoR0C8j2r3qZ4Q=
+gopkg.in/yaml.v3 v3.0.1 h1:fxVm/GzAzEWqLHuvctI91KS9hhNmmWOoWu0XTYJS7CA=
+gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=

internal/codec/measurement_test.go

@@ -2,12 +2,18 @@ package codec
 
 import (
 	"io"
+	"runtime"
 	"sync"
 	"testing"
 	"time"
 )
 
 func TestMeasureBitRateStatic(t *testing.T) {
+	// https://github.com/pion/mediadevices/issues/198
+	if runtime.GOOS == "darwin" {
+		t.Skip("Skipping because Darwin CI is not reliable for timing related tests.")
+	}
+
 	r, w := io.Pipe()
 	const (
 		dataSize       = 1000
@@ -54,6 +60,11 @@ func TestMeasureBitRateStatic(t *testing.T) {
 }
 
 func TestMeasureBitRateDynamic(t *testing.T) {
+	// https://github.com/pion/mediadevices/issues/198
+	if runtime.GOOS == "darwin" {
+		t.Skip("Skipping because Darwin CI is not reliable for timing related tests.")
+	}
+
 	r, w := io.Pipe()
 	const (
 		dataSize       = 1000

ioreader.go

@@ -0,0 +1,75 @@
+package mediadevices
+
+import "github.com/pion/mediadevices/pkg/codec"
+
+type EncodedBuffer struct {
+	Data    []byte
+	Samples uint32
+}
+
+type EncodedReadCloser interface {
+	Read() (EncodedBuffer, func(), error)
+	Close() error
+	codec.Controllable
+}
+
+type encodedReadCloserImpl struct {
+	readFn       func() (EncodedBuffer, func(), error)
+	closeFn      func() error
+	controllerFn func() codec.EncoderController
+}
+
+func (r *encodedReadCloserImpl) Read() (EncodedBuffer, func(), error) {
+	return r.readFn()
+}
+
+func (r *encodedReadCloserImpl) Close() error {
+	return r.closeFn()
+}
+
+func (r *encodedReadCloserImpl) Controller() codec.EncoderController {
+	return r.controllerFn()
+}
+
+type encodedIOReadCloserImpl struct {
+	readFn     func([]byte) (int, error)
+	closeFn    func() error
+	controller func() codec.EncoderController
+}
+
+func newEncodedIOReadCloserImpl(reader EncodedReadCloser) *encodedIOReadCloserImpl {
+	var encoded EncodedBuffer
+	release := func() {}
+	return &encodedIOReadCloserImpl{
+		readFn: func(b []byte) (int, error) {
+			var err error
+
+			if len(encoded.Data) == 0 {
+				release()
+				encoded, release, err = reader.Read()
+				if err != nil {
+					reader.Close()
+					return 0, err
+				}
+			}
+
+			n := copy(b, encoded.Data)
+			encoded.Data = encoded.Data[n:]
+			return n, nil
+		},
+		closeFn:    reader.Close,
+		controller: reader.Controller,
+	}
+}
+
+func (r *encodedIOReadCloserImpl) Read(b []byte) (int, error) {
+	return r.readFn(b)
+}
+
+func (r *encodedIOReadCloserImpl) Close() error {
+	return r.closeFn()
+}
+
+func (r *encodedIOReadCloserImpl) Controller() codec.EncoderController {
+	return r.controller()
+}

libs-builder.Dockerfile

@@ -1,10 +0,0 @@
-FROM dockercore/golang-cross
-
-RUN apt-get update -qq \
-  && apt-get install -y \
-    g++-mingw-w64 \
-    nasm \
-  && apt-get clean && rm -rf /var/lib/apt/lists/*
-
-VOLUME /go/src/github.com/pion/mediadevices
-WORKDIR /go/src/github.com/pion/mediadevices

mediadevices_test.go

@@ -8,6 +8,7 @@ import (
 	"github.com/pion/mediadevices/pkg/driver"
 	_ "github.com/pion/mediadevices/pkg/driver/audiotest"
 	_ "github.com/pion/mediadevices/pkg/driver/videotest"
+	"github.com/pion/mediadevices/pkg/frame"
 	"github.com/pion/mediadevices/pkg/prop"
 )
 
@@ -97,37 +98,145 @@ func TestSelectBestDriverConstraintsResultIsSetProperly(t *testing.T) {
 		t.Fatal("expect to get at least 1 property")
 	}
 	expectedProp := driver.Properties()[0]
-	// Since this is a continuous value, bestConstraints should be set with the value that user specified
-	expectedProp.FrameRate = 30.0
 
-	wantConstraints := MediaTrackConstraints{
-		MediaConstraints: prop.MediaConstraints{
-			VideoConstraints: prop.VideoConstraints{
-				// By reducing the width from the driver by a tiny amount, this property should be chosen.
-				// At the same time, we'll be able to find out if the return constraints will be properly set
-				// to the best constraints.
-				Width:       prop.Int(expectedProp.Width - 1),
-				Height:      prop.Int(expectedProp.Width),
-				FrameFormat: prop.FrameFormat(expectedProp.FrameFormat),
-				FrameRate:   prop.Float(30.0),
-			},
+	// By reducing the value from the driver by a tiny amount, this property should be chosen.
+	// At the same time, we'll be able to find out if the return constraints will be properly set
+	// to the best constraints.
+	cases := map[string]struct {
+		width, height int
+		frameFormat   frame.Format
+		frameRate     float32
+	}{
+		"DifferentWidth": {
+			width:       expectedProp.Width - 1,
+			height:      expectedProp.Height,
+			frameFormat: expectedProp.FrameFormat,
+			frameRate:   expectedProp.FrameRate,
+		},
+		"DifferentHeight": {
+			width:       expectedProp.Width,
+			height:      expectedProp.Height - 1,
+			frameFormat: expectedProp.FrameFormat,
+			frameRate:   expectedProp.FrameRate,
+		},
+		"DifferentFrameFormat": {
+			width:       expectedProp.Width,
+			height:      expectedProp.Height,
+			frameFormat: frame.FormatI420,
+			frameRate:   expectedProp.FrameRate,
 		},
 	}
 
-	bestDriver, bestConstraints, err := selectBestDriver(filterFn, wantConstraints)
+	for name, c := range cases {
+		c := c
+		t.Run(name, func(t *testing.T) {
+			var vc prop.VideoConstraints
+
+			if c.frameRate >= 0 {
+				vc = prop.VideoConstraints{
+					Width:       prop.Int(c.width),
+					Height:      prop.Int(c.height),
+					FrameFormat: prop.FrameFormat(c.frameFormat),
+					FrameRate:   prop.Float(c.frameRate),
+				}
+			} else {
+				// do not specify the framerate
+				vc = prop.VideoConstraints{
+					Width:       prop.Int(c.width),
+					Height:      prop.Int(c.height),
+					FrameFormat: prop.FrameFormat(c.frameFormat),
+				}
+			}
+			wantConstraints := MediaTrackConstraints{
+				MediaConstraints: prop.MediaConstraints{
+					VideoConstraints: vc,
+				},
+			}
+
+			bestDriver, bestConstraints, err := selectBestDriver(filterFn, wantConstraints)
+			if err != nil {
+				t.Fatal(err)
+			}
+
+			if driver != bestDriver {
+				t.Fatal("best driver is not expected")
+			}
+
+			s := bestConstraints.selectedMedia
+			if s.Width != expectedProp.Width ||
+				s.Height != expectedProp.Height ||
+				s.FrameFormat != expectedProp.FrameFormat ||
+				s.FrameRate != expectedProp.FrameRate {
+				t.Fatalf("failed to return best constraints\nexpected:\n%v\n\ngot:\n%v", expectedProp, bestConstraints.selectedMedia)
+			}
+
+		})
+	}
+
+}
+
+func TestSelectBestDriverConstraintsNoFit(t *testing.T) {
+	filterFn := driver.FilterVideoRecorder()
+	drivers := driver.GetManager().Query(filterFn)
+	if len(drivers) == 0 {
+		t.Fatal("expect to get at least 1 driver")
+	}
+
+	driver := drivers[0]
+	err := driver.Open()
 	if err != nil {
-		t.Fatal(err)
+		t.Fatal("expect to open driver successfully")
+	}
+	defer driver.Close()
+
+	if len(driver.Properties()) == 0 {
+		t.Fatal("expect to get at least 1 property")
+	}
+	expectedProp := driver.Properties()[0]
+
+	cases := map[string]struct {
+		width, height int
+		frameFormat   frame.Format
+		frameRate     float32
+	}{
+		"DifferentWidth": {
+			width:       expectedProp.Width - 1,
+			height:      expectedProp.Height,
+			frameFormat: expectedProp.FrameFormat,
+			frameRate:   expectedProp.FrameRate,
+		},
+		"DifferentHeight": {
+			width:       expectedProp.Width,
+			height:      expectedProp.Height - 1,
+			frameFormat: expectedProp.FrameFormat,
+			frameRate:   expectedProp.FrameRate,
+		},
+		"DifferentFrameFormat": {
+			width:       expectedProp.Width,
+			height:      expectedProp.Height,
+			frameFormat: frame.FormatI420,
+			frameRate:   expectedProp.FrameRate,
+		},
 	}
 
-	if driver != bestDriver {
-		t.Fatal("best driver is not expected")
-	}
+	for name, c := range cases {
+		c := c
+		t.Run(name, func(t *testing.T) {
+			wantConstraints := MediaTrackConstraints{
+				MediaConstraints: prop.MediaConstraints{
+					VideoConstraints: prop.VideoConstraints{
+						Width:       prop.IntExact(c.width),
+						Height:      prop.IntExact(c.height),
+						FrameFormat: prop.FrameFormatExact(c.frameFormat),
+						FrameRate:   prop.FloatExact(c.frameRate),
+					},
+				},
+			}
 
-	s := bestConstraints.selectedMedia
-	if s.Width != expectedProp.Width ||
-		s.Height != expectedProp.Height ||
-		s.FrameFormat != expectedProp.FrameFormat ||
-		s.FrameRate != expectedProp.FrameRate {
-		t.Fatalf("failed to return best constraints\nexpected:\n%v\n\ngot:\n%v", expectedProp, bestConstraints.selectedMedia)
+			_, _, err := selectBestDriver(filterFn, wantConstraints)
+			if err == nil {
+				t.Fatal("expect to not find a driver that fits the constraints")
+			}
+		})
 	}
 }

mediastream.go

@@ -2,6 +2,8 @@ package mediadevices
 
 import (
 	"sync"
+
+	"github.com/pion/webrtc/v4"
 )
 
 // MediaStream is an interface that represents a collection of existing tracks.
@@ -23,7 +25,7 @@ type mediaStream struct {
 	l      sync.RWMutex
 }
 
-const trackTypeDefault MediaDeviceType = 0
+const trackTypeDefault webrtc.RTPCodecType = 0
 
 // NewMediaStream creates a MediaStream interface that's defined in
 // https://w3c.github.io/mediacapture-main/#dom-mediastream
@@ -40,11 +42,11 @@ func NewMediaStream(tracks ...Track) (MediaStream, error) {
 }
 
 func (m *mediaStream) GetAudioTracks() []Track {
-	return m.queryTracks(AudioInput)
+	return m.queryTracks(webrtc.RTPCodecTypeAudio)
 }
 
 func (m *mediaStream) GetVideoTracks() []Track {
-	return m.queryTracks(VideoInput)
+	return m.queryTracks(webrtc.RTPCodecTypeVideo)
 }
 
 func (m *mediaStream) GetTracks() []Track {
@@ -53,7 +55,7 @@ func (m *mediaStream) GetTracks() []Track {
 
 // queryTracks returns all tracks that are the same kind as t.
 // If t is 0, which is the default, queryTracks will return all the tracks.
-func (m *mediaStream) queryTracks(t MediaDeviceType) []Track {
+func (m *mediaStream) queryTracks(t webrtc.RTPCodecType) []Track {
 	m.l.RLock()
 	defer m.l.RUnlock()
 

mediastream_test.go

@@ -1,9 +1,12 @@
 package mediadevices
 
 import (
+	"io"
+	"slices"
 	"testing"
 
-	"github.com/pion/webrtc/v2"
+	"github.com/pion/mediadevices/pkg/codec"
+	"github.com/pion/webrtc/v4"
 )
 
 type mockMediaStreamTrack struct {
@@ -14,29 +17,56 @@ func (track *mockMediaStreamTrack) ID() string {
 	return ""
 }
 
+func (track *mockMediaStreamTrack) StreamID() string {
+	return ""
+}
+
+func (track *mockMediaStreamTrack) RID() string {
+	return ""
+}
+
 func (track *mockMediaStreamTrack) Close() error {
 	return nil
 }
 
-func (track *mockMediaStreamTrack) Kind() MediaDeviceType {
-	return track.kind
+func (track *mockMediaStreamTrack) Kind() webrtc.RTPCodecType {
+	switch track.kind {
+	case AudioInput:
+		return webrtc.RTPCodecTypeAudio
+	case VideoInput:
+		return webrtc.RTPCodecTypeVideo
+	default:
+		panic("invalid track kind")
+	}
 }
 
 func (track *mockMediaStreamTrack) OnEnded(handler func(error)) {
 }
 
-func (track *mockMediaStreamTrack) Bind(pc *webrtc.PeerConnection) (*webrtc.Track, error) {
-	return nil, nil
+func (track *mockMediaStreamTrack) Bind(ctx webrtc.TrackLocalContext) (webrtc.RTPCodecParameters, error) {
+	return webrtc.RTPCodecParameters{}, nil
 }
 
-func (track *mockMediaStreamTrack) Unbind(pc *webrtc.PeerConnection) error {
+func (track *mockMediaStreamTrack) Unbind(ctx webrtc.TrackLocalContext) error {
 	return nil
 }
 
-func (track *mockMediaStreamTrack) NewRTPReader(codecName string, mtu int) (RTPReadCloser, error) {
+func (track *mockMediaStreamTrack) NewRTPReader(codecName string, ssrc uint32, mtu int) (RTPReadCloser, error) {
 	return nil, nil
 }
 
+func (track *mockMediaStreamTrack) NewEncodedReader(codecName string) (EncodedReadCloser, error) {
+	return nil, nil
+}
+
+func (track *mockMediaStreamTrack) NewEncodedIOReader(codecName string) (io.ReadCloser, error) {
+	return nil, nil
+}
+
+func (track *mockMediaStreamTrack) EncoderController() codec.EncoderController {
+	return nil
+}
+
 func TestMediaStreamFilters(t *testing.T) {
 	audioTracks := []Track{
 		&mockMediaStreamTrack{AudioInput},
@@ -64,13 +94,7 @@ func TestMediaStreamFilters(t *testing.T) {
 		}
 
 		for _, a := range actual {
-			found := false
-			for _, e := range expected {
-				if e == a {
-					found = true
-					break
-				}
-			}
+			found := slices.Contains(expected, a)
 
 			if !found {
 				t.Fatalf("%s: Expected to find %p in the query results", t.Name(), a)

meta.go

@@ -14,7 +14,7 @@ func detectCurrentVideoProp(broadcaster *video.Broadcaster) (prop.Media, error)
 	// buffered frame or a new frame from the source. This also implies that no frame will be lost
 	// in any case.
 	metaReader := broadcaster.NewReader(false)
-	metaReader = video.DetectChanges(0, func(p prop.Media) { currentProp = p })(metaReader)
+	metaReader = video.DetectChanges(0, 0, func(p prop.Media) { currentProp = p })(metaReader)
 	_, _, err := metaReader.Read()
 
 	return currentProp, err

pkg/avfoundation/AVFoundationBind/AVFoundationBind.h

@@ -27,6 +27,7 @@
 #define MAX_DEVICES                      8
 #define MAX_PROPERTIES                   64
 #define MAX_DEVICE_UID_CHARS             64
+#define MAX_DEVICE_NAME_CHARS            64
 
 typedef const char* STATUS;
 static STATUS STATUS_OK                       = (STATUS) NULL;
@@ -45,7 +46,8 @@ typedef enum AVBindMediaType {
 typedef enum AVBindFrameFormat {
     AVBindFrameFormatI420,
     AVBindFrameFormatNV21,
-    AVBindFrameFormatYUY2,
+    AVBindFrameFormatNV12,
+    AVBindFrameFormatYUYV,
     AVBindFrameFormatUYVY,
 } AVBindFrameFormat;
 
@@ -64,6 +66,7 @@ typedef struct AVBindSession AVBindSession, *PAVBindSession;
 
 typedef struct {
     char uid[MAX_DEVICE_UID_CHARS + 1];
+    char name[MAX_DEVICE_NAME_CHARS + 1];
 } AVBindDevice, *PAVBindDevice;
 
 // AVBindDevices returns a list of AVBindDevices. The result array is pointing to a static

pkg/avfoundation/AVFoundationBind/AVFoundationBind.m

@@ -1,17 +1,17 @@
 // MIT License
-// 
+//
 // Copyright (c) 2019-2020 Pion
-// 
+//
 // Permission is hereby granted, free of charge, to any person obtaining a copy
 // of this software and associated documentation files (the "Software"), to deal
 // in the Software without restriction, including without limitation the rights
 // to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 // copies of the Software, and to permit persons to whom the Software is
 // furnished to do so, subject to the following conditions:
-// 
+//
 // The above copyright notice and this permission notice shall be included in all
 // copies or substantial portions of the Software.
-// 
+//
 // THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 // IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 // FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
@@ -46,6 +46,8 @@
         } \
     } while(0)
 
+static NSString *const UnrecognizedMacOSVersionException = @"UnrecognizedMacOSVersionException";
+
 @interface VideoDataDelegate : NSObject<AVCaptureVideoDataOutputSampleBufferDelegate>
 
 @property (readonly) AVBindDataCallback mCallback;
@@ -74,32 +76,61 @@ didOutputSampleBuffer:(CMSampleBufferRef)sampleBuffer
     if (CMSampleBufferGetNumSamples(sampleBuffer) != 1 ||
         !CMSampleBufferIsValid(sampleBuffer) ||
         !CMSampleBufferDataIsReady(sampleBuffer)) {
-      return;
+        return;
     }
-    
+
     CVImageBufferRef imageBuffer = CMSampleBufferGetImageBuffer(sampleBuffer);
     if (imageBuffer == NULL) {
-      return;
+        return;
     }
-    
-    imageBuffer = CVBufferRetain(imageBuffer);
+
+    CVBufferRetain(imageBuffer);
     CVReturn ret =
         CVPixelBufferLockBaseAddress(imageBuffer, kCVPixelBufferLock_ReadOnly);
     if (ret != kCVReturnSuccess) {
-      return;
+        CVBufferRelease(imageBuffer);
+        return;
     }
     
-    size_t heightY = CVPixelBufferGetHeightOfPlane(imageBuffer, 0);
-    size_t bytesPerRowY = CVPixelBufferGetBytesPerRowOfPlane(imageBuffer, 0);
-    
-    size_t heightUV = CVPixelBufferGetHeightOfPlane(imageBuffer, 1);
-    size_t bytesPerRowUV = CVPixelBufferGetBytesPerRowOfPlane(imageBuffer, 1);
-    
-    int len = (int)((heightY * bytesPerRowY) + (2 * heightUV * bytesPerRowUV));
-    void *buf = CVPixelBufferGetBaseAddressOfPlane(imageBuffer, 0);
-    _mCallback(_mPUserData, buf, len);
-    
-    CVPixelBufferUnlockBaseAddress(imageBuffer, 0);
+    // Handle NV12 special case
+    OSType pixelFormat = CVPixelBufferGetPixelFormatType(imageBuffer);
+    if (pixelFormat == kCVPixelFormatType_420YpCbCr8BiPlanarVideoRange) {
+        // Get actual dimensions of image (without padding)
+        size_t width = CVPixelBufferGetWidth(imageBuffer);
+        size_t height = CVPixelBufferGetHeight(imageBuffer);
+        size_t totalSize = /*Y plane*/ width * height + /*UV plane*/ width * height / 2;
+
+        size_t bytesPerRowY = CVPixelBufferGetBytesPerRowOfPlane(imageBuffer, 0);
+        size_t bytesPerRowUV = CVPixelBufferGetBytesPerRowOfPlane(imageBuffer, 1);
+
+        void *mergedBuffer = malloc(totalSize);
+        if (!mergedBuffer) {
+            NSLog(@"Failed to allocate memory for merged buffer");
+            CVPixelBufferUnlockBaseAddress(imageBuffer, kCVPixelBufferLock_ReadOnly);
+            CVBufferRelease(imageBuffer);
+            return;
+        }
+
+        // Truncate data where we know it should end to strip padding
+        void *yPlaneBuf = CVPixelBufferGetBaseAddressOfPlane(imageBuffer, 0);
+        for (size_t row = 0; row < height; ++row) {
+            memcpy(mergedBuffer + row * width, yPlaneBuf + row * bytesPerRowY, width);
+        }
+
+        void *uvPlaneBuf = CVPixelBufferGetBaseAddressOfPlane(imageBuffer, 1);
+        for (size_t row = 0; row < height / 2; ++row) {
+            memcpy(mergedBuffer + width * height + row * width, uvPlaneBuf + row * bytesPerRowUV, width);
+        }
+
+        _mCallback(_mPUserData, mergedBuffer, (int)totalSize);
+        free(mergedBuffer);
+    } else {
+        void *buf = CVPixelBufferGetBaseAddress(imageBuffer);
+        size_t dataSize = CVPixelBufferGetDataSize(imageBuffer);
+        _mCallback(_mPUserData, buf, (int)dataSize);
+    }
+
+    CVPixelBufferUnlockBaseAddress(imageBuffer, kCVPixelBufferLock_ReadOnly);
     CVBufferRelease(imageBuffer);
 }
 
@@ -133,13 +164,21 @@ didOutputSampleBuffer:(CMSampleBufferRef)sampleBuffer
 
 STATUS frameFormatToFourCC(AVBindFrameFormat format, FourCharCode *pFourCC) {
     STATUS retStatus = STATUS_OK;
+    // Useful mapping reference from ffmpeg:
+    // https://github.com/FFmpeg/FFmpeg/blob/c810a9502cebe32e1dd08ee3d0d17053dde44aa9/libavdevice/avfoundation.m#L53-L80
     switch (format) {
-        case AVBindFrameFormatNV21:
-            *pFourCC = kCVPixelFormatType_420YpCbCr8BiPlanarFullRange;
+        case AVBindFrameFormatI420:
+            *pFourCC = kCVPixelFormatType_420YpCbCr8Planar;
+            break;
+        case AVBindFrameFormatNV12:
+            *pFourCC = kCVPixelFormatType_420YpCbCr8BiPlanarVideoRange;
             break;
         case AVBindFrameFormatUYVY:
             *pFourCC = kCVPixelFormatType_422YpCbCr8;
             break;
+        case AVBindFrameFormatYUYV:
+            *pFourCC = kCVPixelFormatType_422YpCbCr8_yuvs;
+            break;
         // TODO: Add the rest of frame formats
         default:
             retStatus = STATUS_UNSUPPORTED_FRAME_FORMAT;
@@ -150,15 +189,22 @@ STATUS frameFormatToFourCC(AVBindFrameFormat format, FourCharCode *pFourCC) {
 STATUS frameFormatFromFourCC(FourCharCode fourCC, AVBindFrameFormat *pFormat) {
     STATUS retStatus = STATUS_OK;
     switch (fourCC) {
-         case kCVPixelFormatType_420YpCbCr8BiPlanarFullRange:
-             *pFormat = AVBindFrameFormatNV21;
-             break;
-         case kCVPixelFormatType_422YpCbCr8:
-             *pFormat = AVBindFrameFormatUYVY;
-             break;
+        case kCVPixelFormatType_420YpCbCr8Planar:
+            *pFormat = AVBindFrameFormatI420;
+            break;
+        case kCVPixelFormatType_420YpCbCr8BiPlanarFullRange:
+        case kCVPixelFormatType_420YpCbCr8BiPlanarVideoRange:
+            *pFormat = AVBindFrameFormatNV12;
+            break;
+        case kCVPixelFormatType_422YpCbCr8:
+            *pFormat = AVBindFrameFormatUYVY;
+            break;
+        case kCVPixelFormatType_422YpCbCr8_yuvs:
+            *pFormat = AVBindFrameFormatYUYV;
+            break;
          // TODO: Add the rest of frame formats
-         default:
-             retStatus = STATUS_UNSUPPORTED_FRAME_FORMAT;
+        default:
+            retStatus = STATUS_UNSUPPORTED_FRAME_FORMAT;
      }
     return retStatus;
 }
@@ -170,34 +216,53 @@ STATUS AVBindDevices(AVBindMediaType mediaType, PAVBindDevice *ppDevices, int *p
     NSAutoreleasePool *refPool = [[NSAutoreleasePool alloc] init];
     CHK(mediaType == AVBindMediaTypeVideo || mediaType == AVBindMediaTypeAudio, STATUS_UNSUPPORTED_MEDIA_TYPE);
     CHK(ppDevices != NULL && pLen != NULL, STATUS_NULL_ARG);
-    
+
     PAVBindDevice pDevice;
     AVMediaType _mediaType = mediaType == AVBindMediaTypeVideo ? AVMediaTypeVideo : AVMediaTypeAudio;
-    NSArray *refAllTypes = @[
-        AVCaptureDeviceTypeBuiltInWideAngleCamera,
-        AVCaptureDeviceTypeBuiltInMicrophone,
-        AVCaptureDeviceTypeExternalUnknown
-    ];
+
+    NSArray *refAllTypes;
+    #if defined(MAC_OS_VERSION_14_0)
+        if (@available(macOS 14.0, *)) {
+            refAllTypes = @[
+                AVCaptureDeviceTypeBuiltInWideAngleCamera,
+                AVCaptureDeviceTypeMicrophone,
+                AVCaptureDeviceTypeExternal,
+            ];
+        } else {
+            @throw [NSException exceptionWithName:UnrecognizedMacOSVersionException
+                                                   reason:@"Unrecognized or unsupported macOS version detected."
+                                                 userInfo:nil];
+        }
+    #else
+        refAllTypes = @[
+           AVCaptureDeviceTypeBuiltInWideAngleCamera,
+           AVCaptureDeviceTypeBuiltInMicrophone,
+           AVCaptureDeviceTypeExternalUnknown,
+        ];
+    #endif
+
     AVCaptureDeviceDiscoverySession *refSession = [AVCaptureDeviceDiscoverySession
-        discoverySessionWithDeviceTypes: refAllTypes
-        mediaType: _mediaType
-        position: AVCaptureDevicePositionUnspecified];
-    
+                                                   discoverySessionWithDeviceTypes: refAllTypes
+                                                   mediaType: _mediaType
+                                                   position: AVCaptureDevicePositionUnspecified];
+
     int i = 0;
     for (AVCaptureDevice *refDevice in refSession.devices) {
         if (i >= MAX_DEVICES) {
             break;
         }
-        
+
         pDevice = devices + i;
         strncpy(pDevice->uid, refDevice.uniqueID.UTF8String, MAX_DEVICE_UID_CHARS);
         pDevice->uid[MAX_DEVICE_UID_CHARS] = '\0';
+        strncpy(pDevice->name, refDevice.localizedName.UTF8String, MAX_DEVICE_NAME_CHARS);
+        pDevice->name[MAX_DEVICE_NAME_CHARS] = '\0';
         i++;
     }
-    
+
     *ppDevices = devices;
     *pLen = i;
-    
+
 cleanup:
     [refPool drain];
     return retStatus;
@@ -217,7 +282,7 @@ STATUS AVBindSessionInit(AVBindDevice device, PAVBindSession *ppSessionResult) {
     pSession->device = device;
     pSession->refCaptureSession = NULL;
     *ppSessionResult = pSession;
-    
+
 cleanup:
     return retStatus;
 }
@@ -244,15 +309,15 @@ STATUS AVBindSessionOpen(PAVBindSession pSession,
     STATUS retStatus = STATUS_OK;
     NSAutoreleasePool *refPool = [[NSAutoreleasePool alloc] init];
     CHK(pSession != NULL && dataCallback != NULL, STATUS_NULL_ARG);
-    
+
     AVCaptureDeviceInput *refInput;
     NSError *refErr = NULL;
     NSString *refUID = [NSString stringWithUTF8String: pSession->device.uid];
     AVCaptureDevice *refDevice = [AVCaptureDevice deviceWithUniqueID: refUID];
-    
+
     refInput = [[AVCaptureDeviceInput alloc] initWithDevice: refDevice error: &refErr];
     CHK(refErr == NULL, STATUS_DEVICE_INIT_FAILED);
-    
+
     AVCaptureSession *refCaptureSession = [[AVCaptureSession alloc] init];
     refCaptureSession.sessionPreset = AVCaptureSessionPresetMedium;
     [refCaptureSession addInput: refInput];
@@ -261,7 +326,7 @@ STATUS AVBindSessionOpen(PAVBindSession pSession,
         VideoDataDelegate *pDelegate = [[VideoDataDelegate alloc]
                                         init: dataCallback
                                         withUserData: pUserData];
-        
+
         AVCaptureVideoDataOutput *pOutput = [[AVCaptureVideoDataOutput alloc] init];
         FourCharCode fourCC;
         CHK_STATUS(frameFormatToFourCC(property.frameFormat, &fourCC));
@@ -279,10 +344,10 @@ STATUS AVBindSessionOpen(PAVBindSession pSession,
     } else {
         // TODO: implement audio pipeline
     }
-    
+
     pSession->refCaptureSession = [refCaptureSession retain];
     [refCaptureSession startRunning];
-    
+
 cleanup:
     [refPool drain];
     return retStatus;
@@ -293,20 +358,30 @@ STATUS AVBindSessionClose(PAVBindSession pSession) {
     STATUS retStatus = STATUS_OK;
     CHK(pSession != NULL, STATUS_NULL_ARG);
     CHK(pSession->refCaptureSession != NULL, STATUS_OK);
-    
+
     [pSession->refCaptureSession stopRunning];
     [pSession->refCaptureSession release];
     pSession->refCaptureSession = NULL;
-        
+
 cleanup:
     return retStatus;
 }
 
+static NSString* FourCCString(FourCharCode code) {
+    NSString *result = [NSString stringWithFormat:@"%c%c%c%c",
+                        (code >> 24) & 0xff,
+                        (code >> 16) & 0xff,
+                        (code >> 8) & 0xff,
+                        code & 0xff];
+    NSCharacterSet *characterSet = [NSCharacterSet whitespaceCharacterSet];
+    return [result stringByTrimmingCharactersInSet:characterSet];
+}
+
 STATUS AVBindSessionProperties(PAVBindSession pSession, PAVBindMediaProperty *ppProperties, int *pLen) {
     STATUS retStatus = STATUS_OK;
     NSAutoreleasePool *refPool = [[NSAutoreleasePool alloc] init];
     CHK(pSession != NULL && ppProperties != NULL && pLen != NULL, STATUS_NULL_ARG);
-    
+
     NSString *refDeviceUID = [NSString stringWithUTF8String: pSession->device.uid];
     AVCaptureDevice *refDevice = [AVCaptureDevice deviceWithUniqueID: refDeviceUID];
     FourCharCode fourCC;
@@ -319,15 +394,17 @@ STATUS AVBindSessionProperties(PAVBindSession pSession, PAVBindMediaProperty *pp
     for (AVCaptureDeviceFormat *refFormat in refDevice.formats) {
         // TODO: Probably gives a warn to the user
         if (len >= MAX_PROPERTIES) {
+            NSLog(@"[WARNING] skipping the rest of properties due to MAX_PROPERTIES");
             break;
         }
-        
+
         if ([refFormat.mediaType isEqual:AVMediaTypeVideo]) {
             fourCC = CMFormatDescriptionGetMediaSubType(refFormat.formatDescription);
             if (frameFormatFromFourCC(fourCC, &pProperty->frameFormat) != STATUS_OK) {
+                NSLog(@"[WARNING] skipping %@ %dx%d since it's not supported", FourCCString(fourCC), videoDimensions.width, videoDimensions.height);
                 continue;
             }
-            
+
             videoFormat = (CMVideoFormatDescriptionRef) refFormat.formatDescription;
             videoDimensions = CMVideoFormatDescriptionGetDimensions(videoFormat);
             pProperty->height = videoDimensions.height;
@@ -335,16 +412,16 @@ STATUS AVBindSessionProperties(PAVBindSession pSession, PAVBindMediaProperty *pp
         } else {
             // TODO: Get audio properties
         }
-        
+
         pProperty++;
         len++;
     }
-    
+
     *ppProperties = pSession->properties;
     *pLen = len;
-    
+
 cleanup:
-    
+
     [refPool drain];
     return retStatus;
 }

pkg/avfoundation/avfoundation_callback_darwin.go

@@ -1,6 +1,5 @@
 package avfoundation
 
-// extern void onData(void*, void*, int);
 import "C"
 import (
 	"sync"
@@ -18,11 +17,10 @@ type handleID int
 
 //export onData
 func onData(userData unsafe.Pointer, buf unsafe.Pointer, length C.int) {
-	data := C.GoBytes(buf, length)
-
 	handleNum := (*C.int)(userData)
 	cb, ok := lookup(handleID(*handleNum))
 	if ok {
+		data := C.GoBytes(buf, length)
 		cb(data)
 	}
 }

pkg/avfoundation/avfoundation_darwin.go

@@ -11,8 +11,10 @@ package avfoundation
 // }
 import "C"
 import (
+	"context"
 	"fmt"
 	"io"
+	"sync"
 	"unsafe"
 
 	"github.com/pion/mediadevices/pkg/frame"
@@ -32,6 +34,7 @@ type Device struct {
 	// UID is a unique identifier for a device
 	UID     string
 	cDevice C.AVBindDevice
+	Name    string
 }
 
 func frameFormatToAVBind(f frame.Format) (C.AVBindFrameFormat, bool) {
@@ -40,8 +43,10 @@ func frameFormatToAVBind(f frame.Format) (C.AVBindFrameFormat, bool) {
 		return C.AVBindFrameFormatI420, true
 	case frame.FormatNV21:
 		return C.AVBindFrameFormatNV21, true
-	case frame.FormatYUY2:
-		return C.AVBindFrameFormatYUY2, true
+	case frame.FormatNV12:
+		return C.AVBindFrameFormatNV12, true
+	case frame.FormatYUYV:
+		return C.AVBindFrameFormatYUYV, true
 	case frame.FormatUYVY:
 		return C.AVBindFrameFormatUYVY, true
 	default:
@@ -55,8 +60,10 @@ func frameFormatFromAVBind(f C.AVBindFrameFormat) (frame.Format, bool) {
 		return frame.FormatI420, true
 	case C.AVBindFrameFormatNV21:
 		return frame.FormatNV21, true
-	case C.AVBindFrameFormatYUY2:
-		return frame.FormatYUY2, true
+	case C.AVBindFrameFormatNV12:
+		return frame.FormatNV12, true
+	case C.AVBindFrameFormatYUYV:
+		return frame.FormatYUYV, true
 	case C.AVBindFrameFormatUYVY:
 		return frame.FormatUYVY, true
 	default:
@@ -81,6 +88,7 @@ func Devices(mediaType MediaType) ([]Device, error) {
 	for i := range devices {
 		devices[i].UID = C.GoString(&cDevices[i].uid[0])
 		devices[i].cDevice = cDevices[i]
+		devices[i].Name = C.GoString(&cDevices[i].name[0])
 	}
 
 	return devices, nil
@@ -89,9 +97,13 @@ func Devices(mediaType MediaType) ([]Device, error) {
 // ReadCloser is a wrapper around the data callback from AVFoundation. The data received from the
 // the underlying callback can be retrieved by calling Read.
 type ReadCloser struct {
-	dataChan chan []byte
-	id       handleID
-	onClose  func()
+	dataChan   chan []byte
+	id         handleID
+	onClose    func()
+	cancelCtx  context.Context
+	cancelFunc func()
+	closeWG    sync.WaitGroup
+	lock       sync.Mutex
 }
 
 func newReadCloser(onClose func()) *ReadCloser {
@@ -99,12 +111,25 @@ func newReadCloser(onClose func()) *ReadCloser {
 	rc.dataChan = make(chan []byte, 1)
 	rc.onClose = onClose
 	rc.id = register(rc.dataCb)
+	cancelCtx, cancelFunc := context.WithCancel(context.Background())
+	rc.cancelCtx = cancelCtx
+	rc.cancelFunc = cancelFunc
 	return &rc
 }
 
 func (rc *ReadCloser) dataCb(data []byte) {
+	rc.closeWG.Add(1)
+	defer rc.closeWG.Done()
+
 	// TODO: add a policy for slow reader
-	rc.dataChan <- data
+	if rc.cancelCtx.Err() != nil {
+		return
+	}
+	select {
+	// Use the Done channel to avoid waiting for new data from closed camera
+	case <-rc.cancelCtx.Done():
+	case rc.dataChan <- data:
+	}
 }
 
 // Read reads raw data, the format is determined by the media type and property:
@@ -120,17 +145,28 @@ func (rc *ReadCloser) Read() ([]byte, func(), error) {
 
 // Close closes the capturing session, and no data will flow anymore
 func (rc *ReadCloser) Close() {
+	rc.lock.Lock()
+	defer rc.lock.Unlock()
+
+	if rc.cancelCtx.Err() != nil {
+		return // already closed
+	}
+
 	if rc.onClose != nil {
 		rc.onClose()
 	}
-	close(rc.dataChan)
+	rc.cancelFunc()
 	unregister(rc.id)
+	rc.closeWG.Wait()
+	close(rc.dataChan)
 }
 
 // Session represents a capturing session.
 type Session struct {
 	device   Device
 	cSession C.PAVBindSession
+	lock     sync.Mutex
+	closed   bool
 }
 
 // NewSession creates a new capturing session
@@ -148,6 +184,13 @@ func NewSession(device Device) (*Session, error) {
 
 // Close stops capturing session and frees up resources
 func (session *Session) Close() error {
+	session.lock.Lock()
+	defer session.lock.Unlock()
+	if session.closed {
+		return nil
+	}
+	session.closed = true
+
 	if session.cSession == nil {
 		return nil
 	}

pkg/codec/bitrate_tracker.go

@@ -0,0 +1,48 @@
+package codec
+
+import (
+	"time"
+)
+
+type BitrateTracker struct {
+	windowSize time.Duration
+	buffer     []int
+	times      []time.Time
+}
+
+func NewBitrateTracker(windowSize time.Duration) *BitrateTracker {
+	return &BitrateTracker{
+		windowSize: windowSize,
+	}
+}
+
+func (bt *BitrateTracker) AddFrame(sizeBytes int, timestamp time.Time) {
+	bt.buffer = append(bt.buffer, sizeBytes)
+	bt.times = append(bt.times, timestamp)
+
+	// Remove old entries outside the window
+	cutoff := timestamp.Add(-bt.windowSize)
+	i := 0
+	for ; i < len(bt.times); i++ {
+		if bt.times[i].After(cutoff) {
+			break
+		}
+	}
+	bt.buffer = bt.buffer[i:]
+	bt.times = bt.times[i:]
+}
+
+func (bt *BitrateTracker) GetBitrate() float64 {
+	if len(bt.times) < 2 {
+		return 0
+	}
+	totalBytes := 0
+	for _, b := range bt.buffer {
+		totalBytes += b
+	}
+	duration := bt.times[len(bt.times)-1].Sub(bt.times[0]).Seconds()
+	if duration <= 0 {
+		return 0
+	}
+	return float64(totalBytes*8) / duration // bits per second
+}

pkg/codec/bitrate_tracker_test.go

@@ -0,0 +1,19 @@
+package codec
+
+import (
+	"math"
+	"testing"
+	"time"
+)
+
+func TestBitrateTracker(t *testing.T) {
+	packetSize := 1000
+	bt := NewBitrateTracker(time.Second)
+	bt.AddFrame(packetSize, time.Now())
+	bt.AddFrame(packetSize, time.Now().Add(time.Millisecond*100))
+	bt.AddFrame(packetSize, time.Now().Add(time.Millisecond*999))
+	eps := float64(packetSize*8) / 10
+	if got, want := bt.GetBitrate(), float64(packetSize*8)*3; math.Abs(got-want) > eps {
+		t.Fatalf("GetBitrate() = %v, want %v (|diff| <= %v)", got, want, eps)
+	}
+}

pkg/codec/codec.go

@@ -1,35 +1,125 @@
 package codec
 
 import (
+	"time"
+
 	"github.com/pion/mediadevices/pkg/io/audio"
 	"github.com/pion/mediadevices/pkg/io/video"
 	"github.com/pion/mediadevices/pkg/prop"
-	"github.com/pion/webrtc/v2"
+	"github.com/pion/rtp"
+	"github.com/pion/rtp/codecs"
+	"github.com/pion/webrtc/v4"
 )
 
 // RTPCodec wraps webrtc.RTPCodec. RTPCodec might extend webrtc.RTPCodec in the future.
 type RTPCodec struct {
-	*webrtc.RTPCodec
+	webrtc.RTPCodecParameters
+	rtp.Payloader
+
+	// Latency of static frame size codec.
+	Latency time.Duration
 }
 
 // NewRTPH264Codec is a helper to create an H264 codec
 func NewRTPH264Codec(clockrate uint32) *RTPCodec {
-	return &RTPCodec{webrtc.NewRTPH264Codec(webrtc.DefaultPayloadTypeH264, clockrate)}
+	return &RTPCodec{
+		RTPCodecParameters: webrtc.RTPCodecParameters{
+			RTPCodecCapability: webrtc.RTPCodecCapability{
+				MimeType:     webrtc.MimeTypeH264,
+				ClockRate:    90000,
+				Channels:     0,
+				SDPFmtpLine:  "level-asymmetry-allowed=1;packetization-mode=1;profile-level-id=42e01f",
+				RTCPFeedback: nil,
+			},
+			PayloadType: 125,
+		},
+		Payloader: &codecs.H264Payloader{},
+	}
+}
+
+// NewRTPH265Codec is a helper to create an H265 codec
+func NewRTPH265Codec(clockrate uint32) *RTPCodec {
+	return &RTPCodec{
+		RTPCodecParameters: webrtc.RTPCodecParameters{
+			RTPCodecCapability: webrtc.RTPCodecCapability{
+				MimeType:     webrtc.MimeTypeH265,
+				ClockRate:    90000,
+				Channels:     0,
+				SDPFmtpLine:  "",
+				RTCPFeedback: nil,
+			},
+			PayloadType: 116,
+		},
+		Payloader: &codecs.H265Payloader{},
+	}
 }
 
 // NewRTPVP8Codec is a helper to create an VP8 codec
 func NewRTPVP8Codec(clockrate uint32) *RTPCodec {
-	return &RTPCodec{webrtc.NewRTPVP8Codec(webrtc.DefaultPayloadTypeVP8, clockrate)}
+	return &RTPCodec{
+		RTPCodecParameters: webrtc.RTPCodecParameters{
+			RTPCodecCapability: webrtc.RTPCodecCapability{
+				MimeType:     webrtc.MimeTypeVP8,
+				ClockRate:    90000,
+				Channels:     0,
+				SDPFmtpLine:  "",
+				RTCPFeedback: nil,
+			},
+			PayloadType: 96,
+		},
+		Payloader: &codecs.VP8Payloader{},
+	}
 }
 
 // NewRTPVP9Codec is a helper to create an VP9 codec
 func NewRTPVP9Codec(clockrate uint32) *RTPCodec {
-	return &RTPCodec{webrtc.NewRTPVP9Codec(webrtc.DefaultPayloadTypeVP9, clockrate)}
+	return &RTPCodec{
+		RTPCodecParameters: webrtc.RTPCodecParameters{
+			RTPCodecCapability: webrtc.RTPCodecCapability{
+				MimeType:     webrtc.MimeTypeVP9,
+				ClockRate:    90000,
+				Channels:     0,
+				SDPFmtpLine:  "",
+				RTCPFeedback: nil,
+			},
+			PayloadType: 98,
+		},
+		Payloader: &codecs.VP9Payloader{},
+	}
+}
+
+// NewRTPAV1Codec is a helper to create an AV1 codec
+func NewRTPAV1Codec(clockrate uint32) *RTPCodec {
+	return &RTPCodec{
+		RTPCodecParameters: webrtc.RTPCodecParameters{
+			RTPCodecCapability: webrtc.RTPCodecCapability{
+				MimeType:     webrtc.MimeTypeAV1,
+				ClockRate:    90000,
+				Channels:     0,
+				SDPFmtpLine:  "level-idx=5;profile=0;tier=0",
+				RTCPFeedback: nil,
+			},
+			PayloadType: 99,
+		},
+		Payloader: &codecs.AV1Payloader{},
+	}
 }
 
 // NewRTPOpusCodec is a helper to create an Opus codec
 func NewRTPOpusCodec(clockrate uint32) *RTPCodec {
-	return &RTPCodec{webrtc.NewRTPOpusCodec(webrtc.DefaultPayloadTypeOpus, clockrate)}
+	return &RTPCodec{
+		RTPCodecParameters: webrtc.RTPCodecParameters{
+			RTPCodecCapability: webrtc.RTPCodecCapability{
+				MimeType:     webrtc.MimeTypeOpus,
+				ClockRate:    48000,
+				Channels:     2,
+				SDPFmtpLine:  "minptime=10;useinbandfec=1",
+				RTCPFeedback: nil,
+			},
+			PayloadType: 111,
+		},
+		Payloader: &codecs.OpusPayloader{},
+	}
 }
 
 // AudioEncoderBuilder is the interface that wraps basic operations that are
@@ -56,15 +146,43 @@ type VideoEncoderBuilder interface {
 	BuildVideoEncoder(r video.Reader, p prop.Media) (ReadCloser, error)
 }
 
-// ReadCloser is an io.ReadCloser with methods for rate limiting: SetBitRate and ForceKeyFrame
+// ReadCloser is an io.ReadCloser with a controller
 type ReadCloser interface {
 	Read() (b []byte, release func(), err error)
 	Close() error
+	Controllable
+}
+
+// EncoderController is the interface allowing to control the encoder behaviour after it's initialisation.
+// It will possibly have common control method in the future.
+// A controller can have optional methods represented by *Controller interfaces
+type EncoderController any
+
+// Controllable is a interface representing a encoder which can be controlled
+// after it's initialisation with an EncoderController
+type Controllable interface {
+	Controller() EncoderController
+}
+
+// KeyFrameController is a interface representing an encoder that can be forced to produce key frame on demand
+type KeyFrameController interface {
+	EncoderController
+	// ForceKeyFrame forces the next frame to be a keyframe, aka intra-frame.
+	ForceKeyFrame() error
+}
+
+// BitRateController is a interface representing an encoder which can have a variable bit rate
+type BitRateController interface {
+	EncoderController
 	// SetBitRate sets current target bitrate, lower bitrate means smaller data will be transmitted
 	// but this also means that the quality will also be lower.
 	SetBitRate(int) error
-	// ForceKeyFrame forces the next frame to be a keyframe, aka intra-frame.
-	ForceKeyFrame() error
+}
+
+type QPController interface {
+	EncoderController
+	// DynamicQPControl adjusts the QP of the encoder based on the current and target bitrate
+	DynamicQPControl(currentBitrate int, targetBitrate int) error
 }
 
 // BaseParams represents an codec's encoding properties

pkg/codec/internal/codectest/codectest.go

@@ -0,0 +1,159 @@
+// Package codectest provides shared test for codec implementations.
+package codectest
+
+import (
+	"image"
+	"io"
+	"testing"
+
+	"github.com/pion/mediadevices/pkg/codec"
+	"github.com/pion/mediadevices/pkg/io/audio"
+	"github.com/pion/mediadevices/pkg/io/video"
+	"github.com/pion/mediadevices/pkg/prop"
+	"github.com/pion/mediadevices/pkg/wave"
+)
+
+func assertNoPanic(t *testing.T, fn func() error, msg string) error {
+	defer func() {
+		if r := recover(); r != nil {
+			t.Errorf("panic: %v: %s", r, msg)
+		}
+	}()
+	return fn()
+}
+
+func AudioEncoderSimpleReadTest(t *testing.T, c codec.AudioEncoderBuilder, p prop.Media, w wave.Audio) {
+	var eof bool
+	enc, err := c.BuildAudioEncoder(audio.ReaderFunc(func() (wave.Audio, func(), error) {
+		if eof {
+			return nil, nil, io.EOF
+		}
+		return w, nil, nil
+	}), p)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	for i := 0; i < 16; i++ {
+		b, release, err := enc.Read()
+		if err != nil {
+			t.Fatal(err)
+		}
+		if len(b) == 0 {
+			t.Fatal("Encoded frame is empty")
+		}
+		release()
+	}
+
+	eof = true
+	if _, _, err := enc.Read(); err != io.EOF {
+		t.Fatalf("Expected EOF, got %v", err)
+	}
+
+	if err := enc.Close(); err != nil {
+		t.Fatal(err)
+	}
+}
+
+func VideoEncoderSimpleReadTest(t *testing.T, c codec.VideoEncoderBuilder, p prop.Media, img image.Image) {
+	var eof bool
+	enc, err := c.BuildVideoEncoder(video.ReaderFunc(func() (image.Image, func(), error) {
+		if eof {
+			return nil, nil, io.EOF
+		}
+		return img, nil, nil
+	}), p)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	for i := 0; i < 16; i++ {
+		b, release, err := enc.Read()
+		if err != nil {
+			t.Fatal(err)
+		}
+		if len(b) == 0 {
+			t.Errorf("Encoded frame is empty (%d)", i)
+		}
+		release()
+	}
+
+	eof = true
+	if _, _, err := enc.Read(); err != io.EOF {
+		t.Fatalf("Expected EOF, got %v", err)
+	}
+
+	if err := enc.Close(); err != nil {
+		t.Fatal(err)
+	}
+}
+
+func AudioEncoderCloseTwiceTest(t *testing.T, c codec.AudioEncoderBuilder, p prop.Media) {
+	enc, err := c.BuildAudioEncoder(audio.ReaderFunc(func() (wave.Audio, func(), error) {
+		return nil, nil, io.EOF
+	}), p)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	if err := assertNoPanic(t, enc.Close, "on first Close()"); err != nil {
+		t.Fatal(err)
+	}
+	if err := assertNoPanic(t, enc.Close, "on second Close()"); err != nil {
+		t.Fatal(err)
+	}
+}
+
+func VideoEncoderCloseTwiceTest(t *testing.T, c codec.VideoEncoderBuilder, p prop.Media) {
+	enc, err := c.BuildVideoEncoder(video.ReaderFunc(func() (image.Image, func(), error) {
+		return nil, nil, io.EOF
+	}), p)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	if err := assertNoPanic(t, enc.Close, "on first Close()"); err != nil {
+		t.Fatal(err)
+	}
+	if err := assertNoPanic(t, enc.Close, "on second Close()"); err != nil {
+		t.Fatal(err)
+	}
+}
+
+func AudioEncoderReadAfterCloseTest(t *testing.T, c codec.AudioEncoderBuilder, p prop.Media, w wave.Audio) {
+	enc, err := c.BuildAudioEncoder(audio.ReaderFunc(func() (wave.Audio, func(), error) {
+		return w, nil, nil
+	}), p)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	if err := assertNoPanic(t, enc.Close, "on Close()"); err != nil {
+		t.Fatal(err)
+	}
+	if err := assertNoPanic(t, func() error {
+		_, _, err := enc.Read()
+		return err
+	}, "on Read()"); err != io.EOF {
+		t.Fatalf("Expected: %v, got: %v", io.EOF, err)
+	}
+}
+
+func VideoEncoderReadAfterCloseTest(t *testing.T, c codec.VideoEncoderBuilder, p prop.Media, img image.Image) {
+	enc, err := c.BuildVideoEncoder(video.ReaderFunc(func() (image.Image, func(), error) {
+		return img, nil, nil
+	}), p)
+	if err != nil {
+		t.Fatal(err)
+	}
+
+	if err := assertNoPanic(t, enc.Close, "on Close()"); err != nil {
+		t.Fatal(err)
+	}
+	if err := assertNoPanic(t, func() error {
+		_, _, err := enc.Read()
+		return err
+	}, "on Read()"); err != io.EOF {
+		t.Fatalf("Expected: %v, got: %v", io.EOF, err)
+	}
+}

pkg/codec/mmal/mmal.go

@@ -3,7 +3,8 @@
 // Reference: https://github.com/raspberrypi/userland/tree/master/interface/mmal
 package mmal
 
-// #cgo pkg-config: mmal
+// #cgo CFLAGS: -I/opt/vc/include
+// #cgo LDFLAGS: -L/opt/vc/lib -lmmal -lmmal_core -lmmal_util -lmmal_vc_client -lbcm_host -lvcsm -lvcos
 // #include "bridge.h"
 import "C"
 import (
@@ -63,10 +64,11 @@ func (e *encoder) Read() ([]byte, func(), error) {
 		return nil, func() {}, io.EOF
 	}
 
-	img, _, err := e.r.Read()
+	img, release, err := e.r.Read()
 	if err != nil {
 		return nil, func() {}, err
 	}
+	defer release()
 	imgReal := img.(*image.YCbCr)
 	var y, cb, cr C.Slice
 	y.data = (*C.uchar)(&imgReal.Y[0])
@@ -90,12 +92,8 @@ func (e *encoder) Read() ([]byte, func(), error) {
 	return encoded, func() {}, err
 }
 
-func (e *encoder) SetBitRate(b int) error {
-	panic("SetBitRate is not implemented")
-}
-
-func (e *encoder) ForceKeyFrame() error {
-	panic("ForceKeyFrame is not implemented")
+func (e *encoder) Controller() codec.EncoderController {
+	return e
 }
 
 func (e *encoder) Close() error {

pkg/codec/mmal/mmal_test.go

@@ -0,0 +1,84 @@
+package mmal
+
+import (
+	"image"
+	"testing"
+
+	"github.com/pion/mediadevices/pkg/codec"
+	"github.com/pion/mediadevices/pkg/codec/internal/codectest"
+	"github.com/pion/mediadevices/pkg/frame"
+	"github.com/pion/mediadevices/pkg/prop"
+)
+
+func TestEncoder(t *testing.T) {
+	t.Run("SimpleRead", func(t *testing.T) {
+		p, err := NewParams()
+		if err != nil {
+			t.Fatal(err)
+		}
+		codectest.VideoEncoderSimpleReadTest(t, &p,
+			prop.Media{
+				Video: prop.Video{
+					Width:       256,
+					Height:      144,
+					FrameFormat: frame.FormatI420,
+				},
+			},
+			image.NewYCbCr(
+				image.Rect(0, 0, 256, 144),
+				image.YCbCrSubsampleRatio420,
+			),
+		)
+	})
+	t.Run("CloseTwice", func(t *testing.T) {
+		p, err := NewParams()
+		if err != nil {
+			t.Fatal(err)
+		}
+		codectest.VideoEncoderCloseTwiceTest(t, &p, prop.Media{
+			Video: prop.Video{
+				Width:       640,
+				Height:      480,
+				FrameRate:   30,
+				FrameFormat: frame.FormatI420,
+			},
+		})
+	})
+	t.Run("ReadAfterClose", func(t *testing.T) {
+		p, err := NewParams()
+		if err != nil {
+			t.Fatal(err)
+		}
+		codectest.VideoEncoderReadAfterCloseTest(t, &p,
+			prop.Media{
+				Video: prop.Video{
+					Width:       256,
+					Height:      144,
+					FrameFormat: frame.FormatI420,
+				},
+			},
+			image.NewYCbCr(
+				image.Rect(0, 0, 256, 144),
+				image.YCbCrSubsampleRatio420,
+			),
+		)
+	})
+}
+
+func TestShouldImplementBitRateControl(t *testing.T) {
+	t.SkipNow() // TODO: Implement bit rate control
+
+	e := &encoder{}
+	if _, ok := e.Controller().(codec.BitRateController); !ok {
+		t.Error()
+	}
+}
+
+func TestShouldImplementKeyFrameControl(t *testing.T) {
+	t.SkipNow() // TODO: Implement key frame control
+
+	e := &encoder{}
+	if _, ok := e.Controller().(codec.KeyFrameController); !ok {
+		t.Error()
+	}
+}

pkg/codec/openh264/.gitignore

@@ -0,0 +1 @@
+src

pkg/codec/openh264/LICENSE

@@ -0,0 +1,23 @@
+Copyright (c) 2013, Cisco Systems
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+  list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright notice, this
+  list of conditions and the following disclaimer in the documentation and/or
+  other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

pkg/codec/openh264/Makefile

@@ -0,0 +1,47 @@
+git_url := https://github.com/cisco/openh264.git
+version := v2.1.1
+src_root_dir := src
+lib_dir := lib
+include_dir := include/openh264
+lib_prefix := libopenh264
+src_dir := $(src_root_dir)/$(MEDIADEVICES_TARGET_PLATFORM)
+output_path := $(lib_dir)/$(lib_prefix)-$(MEDIADEVICES_TARGET_PLATFORM).a
+
+# OS and Arch mapping to OpenH264 parameters
+ifeq (windows,$(MEDIADEVICES_TARGET_OS))
+	os := mingw_nt
+else
+	os := $(MEDIADEVICES_TARGET_OS)
+endif
+
+ifneq (,$(findstring $(MEDIADEVICES_TARGET_ARCH),armv6 armv7 armv8))
+	arch := arm
+else ifeq (x64,$(MEDIADEVICES_TARGET_ARCH))
+	arch := x86_64
+else
+	arch := $(MEDIADEVICES_TARGET_ARCH)
+endif
+
+.PHONY: all
+all: guard-MEDIADEVICES_TARGET_PLATFORM guard-MEDIADEVICES_TARGET_PLATFORM \
+	guard-MEDIADEVICES_TARGET_OS guard-MEDIADEVICES_TARGET_ARCH \
+	$(output_path) headers
+
+headers: | $(src_dir) $(include_dir)
+	@cp $(src_dir)/codec/api/svc/*.h $(include_dir)
+
+$(output_path): $(src_dir)/$(lib_prefix).a | $(lib_dir)
+	@cp $< $@
+
+$(src_dir)/$(lib_prefix).a: | $(src_dir)
+	$(MEDIADEVICES_TOOLCHAIN_BIN) make --directory=$(src_dir) $(lib_prefix).a \
+		OS=$(os) ARCH=$(arch)
+
+$(src_dir): | $(src_root_dir)
+	git clone --depth=1 --branch=$(version) $(git_url) $@
+
+$(src_root_dir) $(lib_dir) $(include_dir):
+	@mkdir -p $@
+
+guard-%:
+	@if [ -z ${$*} ]; then echo "$* is a required environment variable"; exit 1; fi

pkg/codec/openh264/bridge.cpp

@@ -21,29 +21,26 @@ Encoder *enc_new(const EncoderOptions opts, int *eresult) {
     return NULL;
   }
 
-  // TODO: Remove hardcoded values
-  params.iUsageType = CAMERA_VIDEO_REAL_TIME;
+  params.iUsageType = opts.usage_type;
   params.iPicWidth = opts.width;
   params.iPicHeight = opts.height;
   params.iTargetBitrate = opts.target_bitrate;
   params.iMaxBitrate = opts.target_bitrate;
-  params.iRCMode = RC_BITRATE_MODE;
+  params.iRCMode = opts.rc_mode;
   params.fMaxFrameRate = opts.max_fps;
-  params.bEnableFrameSkip = true;
-  params.uiMaxNalSize = 0;
-  params.uiIntraPeriod = 30;
-  // set to 0, so that it'll automatically use multi threads when needed
-  params.iMultipleThreadIdc = 0;
+  params.bEnableFrameSkip = opts.enable_frame_skip;
+  params.uiMaxNalSize = opts.max_nal_size;
+  params.uiIntraPeriod = opts.intra_period;
+  params.iMultipleThreadIdc = opts.multiple_thread_idc;
   // The base spatial layer 0 is the only one we use.
   params.sSpatialLayers[0].iVideoWidth = params.iPicWidth;
   params.sSpatialLayers[0].iVideoHeight = params.iPicHeight;
   params.sSpatialLayers[0].fFrameRate = params.fMaxFrameRate;
   params.sSpatialLayers[0].iSpatialBitrate = params.iTargetBitrate;
   params.sSpatialLayers[0].iMaxSpatialBitrate = params.iTargetBitrate;
-  // Single NAL unit mode
-  params.sSpatialLayers[0].sSliceArgument.uiSliceNum = 1;
-  params.sSpatialLayers[0].sSliceArgument.uiSliceMode = SM_SIZELIMITED_SLICE;
-  params.sSpatialLayers[0].sSliceArgument.uiSliceSizeConstraint = 12800;
+  params.sSpatialLayers[0].sSliceArgument.uiSliceNum = opts.slice_num;
+  params.sSpatialLayers[0].sSliceArgument.uiSliceMode = opts.slice_mode;
+  params.sSpatialLayers[0].sSliceArgument.uiSliceSizeConstraint = opts.slice_size_constraint;
 
   rv = engine->InitializeExt(&params);
   if (rv != 0) {
@@ -72,6 +69,16 @@ void enc_free(Encoder *e, int *eresult) {
   free(e);
 }
 
+void enc_set_bitrate(Encoder *e, int bitrate) {
+  SEncParamExt encParamExt;
+  e->engine->GetOption(ENCODER_OPTION_SVC_ENCODE_PARAM_EXT, &encParamExt);
+  encParamExt.iTargetBitrate=bitrate;
+  encParamExt.iMaxBitrate=bitrate;
+  encParamExt.sSpatialLayers[0].iSpatialBitrate = bitrate;
+  encParamExt.sSpatialLayers[0].iMaxSpatialBitrate = bitrate;
+  e->engine->SetOption(ENCODER_OPTION_SVC_ENCODE_PARAM_EXT, &encParamExt);
+}
+
 // There's a good reference from ffmpeg in using the encode_frame
 // Reference: https://ffmpeg.org/doxygen/2.6/libopenh264enc_8c_source.html
 Slice enc_encode(Encoder *e, Frame f, int *eresult) {
@@ -80,12 +87,16 @@ Slice enc_encode(Encoder *e, Frame f, int *eresult) {
   SFrameBSInfo info = {0};
   Slice payload = {0};
 
+  if(e->force_key_frame == 1) {
+    e->engine->ForceIntraFrame(true);
+    e->force_key_frame = 0;
+  }
+
   pic.iPicWidth = f.width;
   pic.iPicHeight = f.height;
   pic.iColorFormat = videoFormatI420;
-  // We always received I420 format
-  pic.iStride[0] = pic.iPicWidth;
-  pic.iStride[1] = pic.iStride[2] = pic.iPicWidth / 2;
+  pic.iStride[0] = f.ystride;
+  pic.iStride[1] = pic.iStride[2] = f.cstride;
   pic.pData[0] = (unsigned char *)f.y;
   pic.pData[1] = (unsigned char *)f.u;
   pic.pData[2] = (unsigned char *)f.v;

pkg/codec/openh264/bridge.hpp

@@ -12,6 +12,8 @@ typedef struct Slice {
 
 typedef struct Frame {
   void *y, *u, *v;
+  int ystride;
+  int cstride;
   int height;
   int width;
 } Frame;
@@ -20,6 +22,15 @@ typedef struct EncoderOptions {
   int width, height;
   int target_bitrate;
   float max_fps;
+  EUsageType usage_type;
+  RC_MODES rc_mode;
+  bool enable_frame_skip;
+  unsigned int max_nal_size;
+  unsigned int intra_period;
+  int multiple_thread_idc;
+  unsigned int slice_num;
+  SliceModeEnum slice_mode;
+  unsigned int slice_size_constraint;
 } EncoderOptions;
 
 typedef struct Encoder {
@@ -27,11 +38,13 @@ typedef struct Encoder {
   ISVCEncoder *engine;
   unsigned char *buff;
   int buff_size;
+  int force_key_frame;
 } Encoder;
 
 Encoder *enc_new(const EncoderOptions params, int *eresult);
 void enc_free(Encoder *e, int *eresult);
 Slice enc_encode(Encoder *e, Frame f, int *eresult);
+void enc_set_bitrate(Encoder *e, int bitrate);
 #ifdef __cplusplus
 }
 #endif

pkg/codec/openh264/include/openh264/codec_app_def.h

@@ -167,8 +167,8 @@ typedef enum {
   DECODER_OPTION_LEVEL,                 ///< get current AU level info,only is used in GetOption
   DECODER_OPTION_STATISTICS_LOG_INTERVAL,///< set log output interval
   DECODER_OPTION_IS_REF_PIC,             ///< feedback current frame is ref pic or not
-  DECODER_OPTION_NUM_OF_FRAMES_REMAINING_IN_BUFFER  ///< number of frames remaining in decoder buffer when pictures are required to re-ordered into display-order.
-
+  DECODER_OPTION_NUM_OF_FRAMES_REMAINING_IN_BUFFER,  ///< number of frames remaining in decoder buffer when pictures are required to re-ordered into display-order.
+  DECODER_OPTION_NUM_OF_THREADS,         ///< number of decoding threads. The maximum thread count is equal or less than lesser of (cpu core counts and 16).
 } DECODER_OPTION;
 
 /**

pkg/codec/openh264/include/openh264/codec_def.h

@@ -201,6 +201,7 @@ typedef struct TagBufferInfo {
   union {
     SSysMEMBuffer sSystemBuffer; ///<  memory info for one picture
   } UsrData;                     ///<  output buffer info
+  unsigned char* pDst[3];  //point to picture YUV data
 } SBufferInfo;
 
 

pkg/codec/openh264/include/openh264/codec_ver.h

@@ -0,0 +1,15 @@
+//The current file is auto-generated by script: generate_codec_ver.sh
+#ifndef CODEC_VER_H
+#define CODEC_VER_H
+
+#include "codec_app_def.h"
+
+static const OpenH264Version g_stCodecVersion  = {2, 1, 1, 2005};
+static const char* const g_strCodecVer  = "OpenH264 version:2.1.1.2005";
+
+#define OPENH264_MAJOR (2)
+#define OPENH264_MINOR (1)
+#define OPENH264_REVISION (1)
+#define OPENH264_RESERVED (2005)
+
+#endif  // CODEC_VER_H

pkg/codec/openh264/openh264.go

@@ -1,7 +1,5 @@
 package openh264
 
-// #cgo CFLAGS: -I${SRCDIR}/../../../cvendor/include
-// #cgo CXXFLAGS: -I${SRCDIR}/../../../cvendor/include
 // #include <string.h>
 // #include <openh264/codec_api.h>
 // #include <errno.h>
@@ -35,10 +33,19 @@ func newEncoder(r video.Reader, p prop.Media, params Params) (codec.ReadCloser,
 
 	var rv C.int
 	cEncoder := C.enc_new(C.EncoderOptions{
-		width:          C.int(p.Width),
-		height:         C.int(p.Height),
-		target_bitrate: C.int(params.BitRate),
-		max_fps:        C.float(p.FrameRate),
+		width:                 C.int(p.Width),
+		height:                C.int(p.Height),
+		target_bitrate:        C.int(params.BitRate),
+		max_fps:               C.float(p.FrameRate),
+		usage_type:            C.EUsageType(params.UsageType),
+		rc_mode:               C.RC_MODES(params.RCMode),
+		enable_frame_skip:     C.bool(params.EnableFrameSkip),
+		max_nal_size:          C.uint(params.MaxNalSize),
+		intra_period:          C.uint(params.IntraPeriod),
+		multiple_thread_idc:   C.int(params.MultipleThreadIdc),
+		slice_num:             C.uint(params.SliceNum),
+		slice_mode:            C.SliceModeEnum(params.SliceMode),
+		slice_size_constraint: C.uint(params.SliceSizeConstraint),
 	}, &rv)
 	if err := errResult(rv); err != nil {
 		return nil, fmt.Errorf("failed in creating encoder: %v", err)
@@ -58,20 +65,23 @@ func (e *encoder) Read() ([]byte, func(), error) {
 		return nil, func() {}, io.EOF
 	}
 
-	img, _, err := e.r.Read()
+	img, release, err := e.r.Read()
 	if err != nil {
 		return nil, func() {}, err
 	}
+	defer release()
 
 	yuvImg := img.(*image.YCbCr)
 	bounds := yuvImg.Bounds()
 	var rv C.int
 	s := C.enc_encode(e.engine, C.Frame{
-		y:      unsafe.Pointer(&yuvImg.Y[0]),
-		u:      unsafe.Pointer(&yuvImg.Cb[0]),
-		v:      unsafe.Pointer(&yuvImg.Cr[0]),
-		height: C.int(bounds.Max.Y - bounds.Min.Y),
-		width:  C.int(bounds.Max.X - bounds.Min.X),
+		y:       unsafe.Pointer(&yuvImg.Y[0]),
+		u:       unsafe.Pointer(&yuvImg.Cb[0]),
+		v:       unsafe.Pointer(&yuvImg.Cr[0]),
+		ystride: C.int(yuvImg.YStride),
+		cstride: C.int(yuvImg.CStride),
+		height:  C.int(bounds.Max.Y - bounds.Min.Y),
+		width:   C.int(bounds.Max.X - bounds.Min.X),
 	}, &rv)
 	if err := errResult(rv); err != nil {
 		return nil, func() {}, fmt.Errorf("failed in encoding: %v", err)
@@ -81,18 +91,28 @@ func (e *encoder) Read() ([]byte, func(), error) {
 	return encoded, func() {}, nil
 }
 
-func (e *encoder) SetBitRate(b int) error {
-	panic("SetBitRate is not implemented")
+func (e *encoder) ForceKeyFrame() error {
+	e.engine.force_key_frame = C.int(1)
+	return nil
 }
 
-func (e *encoder) ForceKeyFrame() error {
-	panic("ForceKeyFrame is not implemented")
+func (e *encoder) SetBitRate(bitrate int) error {
+	C.enc_set_bitrate(e.engine, C.int(bitrate))
+	return nil
+}
+
+func (e *encoder) Controller() codec.EncoderController {
+	return e
 }
 
 func (e *encoder) Close() error {
 	e.mu.Lock()
 	defer e.mu.Unlock()
 
+	if e.closed {
+		return nil
+	}
+
 	e.closed = true
 
 	var rv C.int

pkg/codec/openh264/openh264_darwin.go

@@ -1,6 +0,0 @@
-// +build !dynamic
-
-package openh264
-
-// #cgo LDFLAGS: ${SRCDIR}/../../../cvendor/lib/openh264/libopenh264.x86_64-darwin.a
-import "C"

pkg/codec/openh264/openh264_linux.go

@@ -1,6 +0,0 @@
-// +build !dynamic
-
-package openh264
-
-// #cgo LDFLAGS: ${SRCDIR}/../../../cvendor/lib/openh264/libopenh264.x86_64-linux.a
-import "C"

pkg/codec/openh264/openh264_static.go

@@ -0,0 +1,13 @@
+// +build !dynamic
+
+package openh264
+
+//#cgo CFLAGS: -I${SRCDIR}/include
+//#cgo CXXFLAGS: -I${SRCDIR}/include
+//#cgo linux,arm LDFLAGS: ${SRCDIR}/lib/libopenh264-linux-armv7.a
+//#cgo linux,arm64 LDFLAGS: ${SRCDIR}/lib/libopenh264-linux-arm64.a
+//#cgo linux,amd64 LDFLAGS: ${SRCDIR}/lib/libopenh264-linux-x64.a
+//#cgo darwin,amd64 LDFLAGS: ${SRCDIR}/lib/libopenh264-darwin-x64.a
+//#cgo darwin,arm64 LDFLAGS: ${SRCDIR}/lib/libopenh264-darwin-arm64.a
+//#cgo windows,amd64 LDFLAGS: ${SRCDIR}/lib/libopenh264-windows-x64.a -lssp
+import "C"

pkg/codec/openh264/openh264_test.go

@@ -0,0 +1,82 @@
+package openh264
+
+import (
+	"image"
+	"testing"
+
+	"github.com/pion/mediadevices/pkg/codec"
+	"github.com/pion/mediadevices/pkg/codec/internal/codectest"
+	"github.com/pion/mediadevices/pkg/frame"
+	"github.com/pion/mediadevices/pkg/prop"
+)
+
+func TestShouldImplementBitRateControl(t *testing.T) {
+	t.SkipNow() // TODO: Implement bit rate control
+
+	e := &encoder{}
+	if _, ok := e.Controller().(codec.BitRateController); !ok {
+		t.Error()
+	}
+}
+
+func TestShouldImplementKeyFrameControl(t *testing.T) {
+	e := &encoder{}
+	if _, ok := e.Controller().(codec.KeyFrameController); !ok {
+		t.Error()
+	}
+}
+
+func TestEncoder(t *testing.T) {
+	t.Run("SimpleRead", func(t *testing.T) {
+		p, err := NewParams()
+		if err != nil {
+			t.Fatal(err)
+		}
+		codectest.VideoEncoderSimpleReadTest(t, &p,
+			prop.Media{
+				Video: prop.Video{
+					Width:       256,
+					Height:      144,
+					FrameFormat: frame.FormatI420,
+				},
+			},
+			image.NewYCbCr(
+				image.Rect(0, 0, 256, 144),
+				image.YCbCrSubsampleRatio420,
+			),
+		)
+	})
+	t.Run("CloseTwice", func(t *testing.T) {
+		p, err := NewParams()
+		if err != nil {
+			t.Fatal(err)
+		}
+		codectest.VideoEncoderCloseTwiceTest(t, &p, prop.Media{
+			Video: prop.Video{
+				Width:       640,
+				Height:      480,
+				FrameRate:   30,
+				FrameFormat: frame.FormatI420,
+			},
+		})
+	})
+	t.Run("ReadAfterClose", func(t *testing.T) {
+		p, err := NewParams()
+		if err != nil {
+			t.Fatal(err)
+		}
+		codectest.VideoEncoderReadAfterCloseTest(t, &p,
+			prop.Media{
+				Video: prop.Video{
+					Width:       256,
+					Height:      144,
+					FrameFormat: frame.FormatI420,
+				},
+			},
+			image.NewYCbCr(
+				image.Rect(0, 0, 256, 144),
+				image.YCbCrSubsampleRatio420,
+			),
+		)
+	})
+}

pkg/codec/openh264/openh264_windows.go

@@ -1,14 +0,0 @@
-// +build !dynamic
-
-package openh264
-
-// #cgo LDFLAGS: ${SRCDIR}/../../../cvendor/lib/openh264/libopenh264.x86_64-windows.a -lssp
-// #include <stdio.h>
-// #include <crtdefs.h>
-// #if __MINGW64_VERSION_MAJOR < 6
-// // Workaround for the breaking ABI change between MinGW 5 and 6
-//   FILE *__cdecl __acrt_iob_func(unsigned index) { return &(__iob_func()[index]); }
-//   typedef FILE *__cdecl (*_f__acrt_iob_func)(unsigned index);
-//   _f__acrt_iob_func __MINGW_IMP_SYMBOL(__acrt_iob_func) = __acrt_iob_func;
-// #endif
-import "C"

pkg/codec/openh264/params.go

@@ -1,5 +1,8 @@
 package openh264
 
+// #include <openh264/codec_api.h>
+import "C"
+
 import (
 	"github.com/pion/mediadevices/pkg/codec"
 	"github.com/pion/mediadevices/pkg/io/video"
@@ -9,14 +12,62 @@ import (
 // Params stores libopenh264 specific encoding parameters.
 type Params struct {
 	codec.BaseParams
+	UsageType           UsageTypeEnum
+	RCMode              RCModeEnum
+	EnableFrameSkip     bool
+	MaxNalSize          uint
+	IntraPeriod         uint
+	MultipleThreadIdc   int
+	SliceNum            uint
+	SliceMode           SliceModeEnum
+	SliceSizeConstraint uint
 }
 
+type UsageTypeEnum int
+
+const (
+	CameraVideoRealTime      UsageTypeEnum = C.CAMERA_VIDEO_REAL_TIME   ///< camera video for real-time communication
+	ScreenContentRealTime    UsageTypeEnum = C.SCREEN_CONTENT_REAL_TIME ///< screen content signal
+	CameraVideoNonRealTime   UsageTypeEnum = C.CAMERA_VIDEO_NON_REAL_TIME
+	ScreenContentNonRealTime UsageTypeEnum = C.SCREEN_CONTENT_NON_REAL_TIME
+	InputContentTypeAll      UsageTypeEnum = C.INPUT_CONTENT_TYPE_ALL
+)
+
+type RCModeEnum int
+
+const (
+	RCQualityMode         RCModeEnum = C.RC_QUALITY_MODE           ///< quality mode
+	RCBitrateMode         RCModeEnum = C.RC_BITRATE_MODE           ///< bitrate mode
+	RCBufferbaseedMode    RCModeEnum = C.RC_BUFFERBASED_MODE       ///< no bitrate control,only using buffer status,adjust the video quality
+	RCTimestampMode       RCModeEnum = C.RC_TIMESTAMP_MODE         //rate control based timestamp
+	RCBitrateModePostSkip RCModeEnum = C.RC_BITRATE_MODE_POST_SKIP ///< this is in-building RC MODE, WILL BE DELETED after algorithm tuning!
+	RCOffMode             RCModeEnum = C.RC_OFF_MODE               ///< rate control off mode
+)
+
+type SliceModeEnum uint
+
+const (
+	SMSingleSlice      SliceModeEnum = C.SM_SINGLE_SLICE      ///< | SliceNum==1
+	SMFixedslcnumSlice SliceModeEnum = C.SM_FIXEDSLCNUM_SLICE ///< | according to SliceNum        | enabled dynamic slicing for multi-thread
+	SMRasterSlice      SliceModeEnum = C.SM_RASTER_SLICE      ///< | according to SlicesAssign    | need input of MB numbers each slice. In addition, if other constraint in SSliceArgument is presented, need to follow the constraints. Typically if MB num and slice size are both constrained, re-encoding may be involved.
+	SMSizelimitedSlice SliceModeEnum = C.SM_SIZELIMITED_SLICE ///< | according to SliceSize       | slicing according to size, the slicing will be dynamic(have no idea about slice_nums until encoding current frame)
+)
+
 // NewParams returns default openh264 codec specific parameters.
 func NewParams() (Params, error) {
 	return Params{
 		BaseParams: codec.BaseParams{
 			BitRate: 100000,
 		},
+		UsageType:           CameraVideoRealTime,
+		RCMode:              RCBitrateMode,
+		EnableFrameSkip:     true,
+		MaxNalSize:          0,
+		IntraPeriod:         30,
+		MultipleThreadIdc:   0, // Defaults to 0, so that it'll automatically use multi threads when needed
+		SliceNum:            1, // Defaults to single NAL unit mode
+		SliceMode:           SMSizelimitedSlice,
+		SliceSizeConstraint: 12800,
 	}, nil
 }
 

pkg/codec/opus/.gitignore

@@ -0,0 +1 @@
+src

pkg/codec/opus/LICENSE

@@ -0,0 +1,44 @@
+Copyright 2001-2011 Xiph.Org, Skype Limited, Octasic,
+                    Jean-Marc Valin, Timothy B. Terriberry,
+                    CSIRO, Gregory Maxwell, Mark Borgerding,
+                    Erik de Castro Lopo
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+- Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+
+- Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimer in the
+documentation and/or other materials provided with the distribution.
+
+- Neither the name of Internet Society, IETF or IETF Trust, nor the
+names of specific contributors, may be used to endorse or promote
+products derived from this software without specific prior written
+permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Opus is subject to the royalty-free patent licenses which are
+specified at:
+
+Xiph.Org Foundation:
+https://datatracker.ietf.org/ipr/1524/
+
+Microsoft Corporation:
+https://datatracker.ietf.org/ipr/1914/
+
+Broadcom Corporation:
+https://datatracker.ietf.org/ipr/1526/

pkg/codec/opus/Makefile

@@ -0,0 +1,31 @@
+git_url := https://github.com/xiph/opus.git
+version := v1.3.1
+src_root_dir := src
+lib_dir := lib
+include_dir := include
+lib_prefix := libopus
+src_dir := $(src_root_dir)/$(MEDIADEVICES_TARGET_PLATFORM)
+output_path := $(lib_dir)/$(lib_prefix)-$(MEDIADEVICES_TARGET_PLATFORM).a
+
+.PHONY: all
+all: guard-MEDIADEVICES_TARGET_PLATFORM guard-MEDIADEVICES_TOOLCHAIN_BIN $(output_path) headers
+
+headers: | $(src_dir) $(include_dir)
+	@cp $(src_dir)/include/*.h $(include_dir)
+
+$(output_path): $(src_dir)/$(lib_prefix).a | $(lib_dir)
+	@cp $< $@
+
+$(src_dir)/$(lib_prefix).a: | $(src_dir)
+	cd $(src_dir) && \
+		$(MEDIADEVICES_TOOLCHAIN_BIN) cmake -DOPUS_STACK_PROTECTOR=OFF -DCMAKE_C_FLAGS="-fpic" && \
+		$(MEDIADEVICES_TOOLCHAIN_BIN) make VERBOSE=1
+
+$(src_dir): | $(src_root_dir)
+	git clone --depth=1 --branch=$(version) $(git_url) $@
+
+$(src_root_dir) $(lib_dir) $(include_dir):
+	@mkdir -p $@
+
+guard-%:
+	@if [ -z ${$*} ]; then echo "$* is a required environment variable"; exit 1; fi

pkg/codec/opus/include/opus.h

@@ -0,0 +1,981 @@
+/* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited
+   Written by Jean-Marc Valin and Koen Vos */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/**
+ * @file opus.h
+ * @brief Opus reference implementation API
+ */
+
+#ifndef OPUS_H
+#define OPUS_H
+
+#include "opus_types.h"
+#include "opus_defines.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @mainpage Opus
+ *
+ * The Opus codec is designed for interactive speech and audio transmission over the Internet.
+ * It is designed by the IETF Codec Working Group and incorporates technology from
+ * Skype's SILK codec and Xiph.Org's CELT codec.
+ *
+ * The Opus codec is designed to handle a wide range of interactive audio applications,
+ * including Voice over IP, videoconferencing, in-game chat, and even remote live music
+ * performances. It can scale from low bit-rate narrowband speech to very high quality
+ * stereo music. Its main features are:
+
+ * @li Sampling rates from 8 to 48 kHz
+ * @li Bit-rates from 6 kb/s to 510 kb/s
+ * @li Support for both constant bit-rate (CBR) and variable bit-rate (VBR)
+ * @li Audio bandwidth from narrowband to full-band
+ * @li Support for speech and music
+ * @li Support for mono and stereo
+ * @li Support for multichannel (up to 255 channels)
+ * @li Frame sizes from 2.5 ms to 60 ms
+ * @li Good loss robustness and packet loss concealment (PLC)
+ * @li Floating point and fixed-point implementation
+ *
+ * Documentation sections:
+ * @li @ref opus_encoder
+ * @li @ref opus_decoder
+ * @li @ref opus_repacketizer
+ * @li @ref opus_multistream
+ * @li @ref opus_libinfo
+ * @li @ref opus_custom
+ */
+
+/** @defgroup opus_encoder Opus Encoder
+  * @{
+  *
+  * @brief This page describes the process and functions used to encode Opus.
+  *
+  * Since Opus is a stateful codec, the encoding process starts with creating an encoder
+  * state. This can be done with:
+  *
+  * @code
+  * int          error;
+  * OpusEncoder *enc;
+  * enc = opus_encoder_create(Fs, channels, application, &error);
+  * @endcode
+  *
+  * From this point, @c enc can be used for encoding an audio stream. An encoder state
+  * @b must @b not be used for more than one stream at the same time. Similarly, the encoder
+  * state @b must @b not be re-initialized for each frame.
+  *
+  * While opus_encoder_create() allocates memory for the state, it's also possible
+  * to initialize pre-allocated memory:
+  *
+  * @code
+  * int          size;
+  * int          error;
+  * OpusEncoder *enc;
+  * size = opus_encoder_get_size(channels);
+  * enc = malloc(size);
+  * error = opus_encoder_init(enc, Fs, channels, application);
+  * @endcode
+  *
+  * where opus_encoder_get_size() returns the required size for the encoder state. Note that
+  * future versions of this code may change the size, so no assuptions should be made about it.
+  *
+  * The encoder state is always continuous in memory and only a shallow copy is sufficient
+  * to copy it (e.g. memcpy())
+  *
+  * It is possible to change some of the encoder's settings using the opus_encoder_ctl()
+  * interface. All these settings already default to the recommended value, so they should
+  * only be changed when necessary. The most common settings one may want to change are:
+  *
+  * @code
+  * opus_encoder_ctl(enc, OPUS_SET_BITRATE(bitrate));
+  * opus_encoder_ctl(enc, OPUS_SET_COMPLEXITY(complexity));
+  * opus_encoder_ctl(enc, OPUS_SET_SIGNAL(signal_type));
+  * @endcode
+  *
+  * where
+  *
+  * @arg bitrate is in bits per second (b/s)
+  * @arg complexity is a value from 1 to 10, where 1 is the lowest complexity and 10 is the highest
+  * @arg signal_type is either OPUS_AUTO (default), OPUS_SIGNAL_VOICE, or OPUS_SIGNAL_MUSIC
+  *
+  * See @ref opus_encoderctls and @ref opus_genericctls for a complete list of parameters that can be set or queried. Most parameters can be set or changed at any time during a stream.
+  *
+  * To encode a frame, opus_encode() or opus_encode_float() must be called with exactly one frame (2.5, 5, 10, 20, 40 or 60 ms) of audio data:
+  * @code
+  * len = opus_encode(enc, audio_frame, frame_size, packet, max_packet);
+  * @endcode
+  *
+  * where
+  * <ul>
+  * <li>audio_frame is the audio data in opus_int16 (or float for opus_encode_float())</li>
+  * <li>frame_size is the duration of the frame in samples (per channel)</li>
+  * <li>packet is the byte array to which the compressed data is written</li>
+  * <li>max_packet is the maximum number of bytes that can be written in the packet (4000 bytes is recommended).
+  *     Do not use max_packet to control VBR target bitrate, instead use the #OPUS_SET_BITRATE CTL.</li>
+  * </ul>
+  *
+  * opus_encode() and opus_encode_float() return the number of bytes actually written to the packet.
+  * The return value <b>can be negative</b>, which indicates that an error has occurred. If the return value
+  * is 2 bytes or less, then the packet does not need to be transmitted (DTX).
+  *
+  * Once the encoder state if no longer needed, it can be destroyed with
+  *
+  * @code
+  * opus_encoder_destroy(enc);
+  * @endcode
+  *
+  * If the encoder was created with opus_encoder_init() rather than opus_encoder_create(),
+  * then no action is required aside from potentially freeing the memory that was manually
+  * allocated for it (calling free(enc) for the example above)
+  *
+  */
+
+/** Opus encoder state.
+  * This contains the complete state of an Opus encoder.
+  * It is position independent and can be freely copied.
+  * @see opus_encoder_create,opus_encoder_init
+  */
+typedef struct OpusEncoder OpusEncoder;
+
+/** Gets the size of an <code>OpusEncoder</code> structure.
+  * @param[in] channels <tt>int</tt>: Number of channels.
+  *                                   This must be 1 or 2.
+  * @returns The size in bytes.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_encoder_get_size(int channels);
+
+/**
+ */
+
+/** Allocates and initializes an encoder state.
+ * There are three coding modes:
+ *
+ * @ref OPUS_APPLICATION_VOIP gives best quality at a given bitrate for voice
+ *    signals. It enhances the  input signal by high-pass filtering and
+ *    emphasizing formants and harmonics. Optionally  it includes in-band
+ *    forward error correction to protect against packet loss. Use this
+ *    mode for typical VoIP applications. Because of the enhancement,
+ *    even at high bitrates the output may sound different from the input.
+ *
+ * @ref OPUS_APPLICATION_AUDIO gives best quality at a given bitrate for most
+ *    non-voice signals like music. Use this mode for music and mixed
+ *    (music/voice) content, broadcast, and applications requiring less
+ *    than 15 ms of coding delay.
+ *
+ * @ref OPUS_APPLICATION_RESTRICTED_LOWDELAY configures low-delay mode that
+ *    disables the speech-optimized mode in exchange for slightly reduced delay.
+ *    This mode can only be set on an newly initialized or freshly reset encoder
+ *    because it changes the codec delay.
+ *
+ * This is useful when the caller knows that the speech-optimized modes will not be needed (use with caution).
+ * @param [in] Fs <tt>opus_int32</tt>: Sampling rate of input signal (Hz)
+ *                                     This must be one of 8000, 12000, 16000,
+ *                                     24000, or 48000.
+ * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) in input signal
+ * @param [in] application <tt>int</tt>: Coding mode (@ref OPUS_APPLICATION_VOIP/@ref OPUS_APPLICATION_AUDIO/@ref OPUS_APPLICATION_RESTRICTED_LOWDELAY)
+ * @param [out] error <tt>int*</tt>: @ref opus_errorcodes
+ * @note Regardless of the sampling rate and number channels selected, the Opus encoder
+ * can switch to a lower audio bandwidth or number of channels if the bitrate
+ * selected is too low. This also means that it is safe to always use 48 kHz stereo input
+ * and let the encoder optimize the encoding.
+ */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusEncoder *opus_encoder_create(
+    opus_int32 Fs,
+    int channels,
+    int application,
+    int *error
+);
+
+/** Initializes a previously allocated encoder state
+  * The memory pointed to by st must be at least the size returned by opus_encoder_get_size().
+  * This is intended for applications which use their own allocator instead of malloc.
+  * @see opus_encoder_create(),opus_encoder_get_size()
+  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
+  * @param [in] st <tt>OpusEncoder*</tt>: Encoder state
+  * @param [in] Fs <tt>opus_int32</tt>: Sampling rate of input signal (Hz)
+ *                                      This must be one of 8000, 12000, 16000,
+ *                                      24000, or 48000.
+  * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) in input signal
+  * @param [in] application <tt>int</tt>: Coding mode (OPUS_APPLICATION_VOIP/OPUS_APPLICATION_AUDIO/OPUS_APPLICATION_RESTRICTED_LOWDELAY)
+  * @retval #OPUS_OK Success or @ref opus_errorcodes
+  */
+OPUS_EXPORT int opus_encoder_init(
+    OpusEncoder *st,
+    opus_int32 Fs,
+    int channels,
+    int application
+) OPUS_ARG_NONNULL(1);
+
+/** Encodes an Opus frame.
+  * @param [in] st <tt>OpusEncoder*</tt>: Encoder state
+  * @param [in] pcm <tt>opus_int16*</tt>: Input signal (interleaved if 2 channels). length is frame_size*channels*sizeof(opus_int16)
+  * @param [in] frame_size <tt>int</tt>: Number of samples per channel in the
+  *                                      input signal.
+  *                                      This must be an Opus frame size for
+  *                                      the encoder's sampling rate.
+  *                                      For example, at 48 kHz the permitted
+  *                                      values are 120, 240, 480, 960, 1920,
+  *                                      and 2880.
+  *                                      Passing in a duration of less than
+  *                                      10 ms (480 samples at 48 kHz) will
+  *                                      prevent the encoder from using the LPC
+  *                                      or hybrid modes.
+  * @param [out] data <tt>unsigned char*</tt>: Output payload.
+  *                                            This must contain storage for at
+  *                                            least \a max_data_bytes.
+  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
+  *                                                 memory for the output
+  *                                                 payload. This may be
+  *                                                 used to impose an upper limit on
+  *                                                 the instant bitrate, but should
+  *                                                 not be used as the only bitrate
+  *                                                 control. Use #OPUS_SET_BITRATE to
+  *                                                 control the bitrate.
+  * @returns The length of the encoded packet (in bytes) on success or a
+  *          negative error code (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_encode(
+    OpusEncoder *st,
+    const opus_int16 *pcm,
+    int frame_size,
+    unsigned char *data,
+    opus_int32 max_data_bytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Encodes an Opus frame from floating point input.
+  * @param [in] st <tt>OpusEncoder*</tt>: Encoder state
+  * @param [in] pcm <tt>float*</tt>: Input in float format (interleaved if 2 channels), with a normal range of +/-1.0.
+  *          Samples with a range beyond +/-1.0 are supported but will
+  *          be clipped by decoders using the integer API and should
+  *          only be used if it is known that the far end supports
+  *          extended dynamic range.
+  *          length is frame_size*channels*sizeof(float)
+  * @param [in] frame_size <tt>int</tt>: Number of samples per channel in the
+  *                                      input signal.
+  *                                      This must be an Opus frame size for
+  *                                      the encoder's sampling rate.
+  *                                      For example, at 48 kHz the permitted
+  *                                      values are 120, 240, 480, 960, 1920,
+  *                                      and 2880.
+  *                                      Passing in a duration of less than
+  *                                      10 ms (480 samples at 48 kHz) will
+  *                                      prevent the encoder from using the LPC
+  *                                      or hybrid modes.
+  * @param [out] data <tt>unsigned char*</tt>: Output payload.
+  *                                            This must contain storage for at
+  *                                            least \a max_data_bytes.
+  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
+  *                                                 memory for the output
+  *                                                 payload. This may be
+  *                                                 used to impose an upper limit on
+  *                                                 the instant bitrate, but should
+  *                                                 not be used as the only bitrate
+  *                                                 control. Use #OPUS_SET_BITRATE to
+  *                                                 control the bitrate.
+  * @returns The length of the encoded packet (in bytes) on success or a
+  *          negative error code (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_encode_float(
+    OpusEncoder *st,
+    const float *pcm,
+    int frame_size,
+    unsigned char *data,
+    opus_int32 max_data_bytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Frees an <code>OpusEncoder</code> allocated by opus_encoder_create().
+  * @param[in] st <tt>OpusEncoder*</tt>: State to be freed.
+  */
+OPUS_EXPORT void opus_encoder_destroy(OpusEncoder *st);
+
+/** Perform a CTL function on an Opus encoder.
+  *
+  * Generally the request and subsequent arguments are generated
+  * by a convenience macro.
+  * @param st <tt>OpusEncoder*</tt>: Encoder state.
+  * @param request This and all remaining parameters should be replaced by one
+  *                of the convenience macros in @ref opus_genericctls or
+  *                @ref opus_encoderctls.
+  * @see opus_genericctls
+  * @see opus_encoderctls
+  */
+OPUS_EXPORT int opus_encoder_ctl(OpusEncoder *st, int request, ...) OPUS_ARG_NONNULL(1);
+/**@}*/
+
+/** @defgroup opus_decoder Opus Decoder
+  * @{
+  *
+  * @brief This page describes the process and functions used to decode Opus.
+  *
+  * The decoding process also starts with creating a decoder
+  * state. This can be done with:
+  * @code
+  * int          error;
+  * OpusDecoder *dec;
+  * dec = opus_decoder_create(Fs, channels, &error);
+  * @endcode
+  * where
+  * @li Fs is the sampling rate and must be 8000, 12000, 16000, 24000, or 48000
+  * @li channels is the number of channels (1 or 2)
+  * @li error will hold the error code in case of failure (or #OPUS_OK on success)
+  * @li the return value is a newly created decoder state to be used for decoding
+  *
+  * While opus_decoder_create() allocates memory for the state, it's also possible
+  * to initialize pre-allocated memory:
+  * @code
+  * int          size;
+  * int          error;
+  * OpusDecoder *dec;
+  * size = opus_decoder_get_size(channels);
+  * dec = malloc(size);
+  * error = opus_decoder_init(dec, Fs, channels);
+  * @endcode
+  * where opus_decoder_get_size() returns the required size for the decoder state. Note that
+  * future versions of this code may change the size, so no assuptions should be made about it.
+  *
+  * The decoder state is always continuous in memory and only a shallow copy is sufficient
+  * to copy it (e.g. memcpy())
+  *
+  * To decode a frame, opus_decode() or opus_decode_float() must be called with a packet of compressed audio data:
+  * @code
+  * frame_size = opus_decode(dec, packet, len, decoded, max_size, 0);
+  * @endcode
+  * where
+  *
+  * @li packet is the byte array containing the compressed data
+  * @li len is the exact number of bytes contained in the packet
+  * @li decoded is the decoded audio data in opus_int16 (or float for opus_decode_float())
+  * @li max_size is the max duration of the frame in samples (per channel) that can fit into the decoded_frame array
+  *
+  * opus_decode() and opus_decode_float() return the number of samples (per channel) decoded from the packet.
+  * If that value is negative, then an error has occurred. This can occur if the packet is corrupted or if the audio
+  * buffer is too small to hold the decoded audio.
+  *
+  * Opus is a stateful codec with overlapping blocks and as a result Opus
+  * packets are not coded independently of each other. Packets must be
+  * passed into the decoder serially and in the correct order for a correct
+  * decode. Lost packets can be replaced with loss concealment by calling
+  * the decoder with a null pointer and zero length for the missing packet.
+  *
+  * A single codec state may only be accessed from a single thread at
+  * a time and any required locking must be performed by the caller. Separate
+  * streams must be decoded with separate decoder states and can be decoded
+  * in parallel unless the library was compiled with NONTHREADSAFE_PSEUDOSTACK
+  * defined.
+  *
+  */
+
+/** Opus decoder state.
+  * This contains the complete state of an Opus decoder.
+  * It is position independent and can be freely copied.
+  * @see opus_decoder_create,opus_decoder_init
+  */
+typedef struct OpusDecoder OpusDecoder;
+
+/** Gets the size of an <code>OpusDecoder</code> structure.
+  * @param [in] channels <tt>int</tt>: Number of channels.
+  *                                    This must be 1 or 2.
+  * @returns The size in bytes.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decoder_get_size(int channels);
+
+/** Allocates and initializes a decoder state.
+  * @param [in] Fs <tt>opus_int32</tt>: Sample rate to decode at (Hz).
+  *                                     This must be one of 8000, 12000, 16000,
+  *                                     24000, or 48000.
+  * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) to decode
+  * @param [out] error <tt>int*</tt>: #OPUS_OK Success or @ref opus_errorcodes
+  *
+  * Internally Opus stores data at 48000 Hz, so that should be the default
+  * value for Fs. However, the decoder can efficiently decode to buffers
+  * at 8, 12, 16, and 24 kHz so if for some reason the caller cannot use
+  * data at the full sample rate, or knows the compressed data doesn't
+  * use the full frequency range, it can request decoding at a reduced
+  * rate. Likewise, the decoder is capable of filling in either mono or
+  * interleaved stereo pcm buffers, at the caller's request.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusDecoder *opus_decoder_create(
+    opus_int32 Fs,
+    int channels,
+    int *error
+);
+
+/** Initializes a previously allocated decoder state.
+  * The state must be at least the size returned by opus_decoder_get_size().
+  * This is intended for applications which use their own allocator instead of malloc. @see opus_decoder_create,opus_decoder_get_size
+  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
+  * @param [in] st <tt>OpusDecoder*</tt>: Decoder state.
+  * @param [in] Fs <tt>opus_int32</tt>: Sampling rate to decode to (Hz).
+  *                                     This must be one of 8000, 12000, 16000,
+  *                                     24000, or 48000.
+  * @param [in] channels <tt>int</tt>: Number of channels (1 or 2) to decode
+  * @retval #OPUS_OK Success or @ref opus_errorcodes
+  */
+OPUS_EXPORT int opus_decoder_init(
+    OpusDecoder *st,
+    opus_int32 Fs,
+    int channels
+) OPUS_ARG_NONNULL(1);
+
+/** Decode an Opus packet.
+  * @param [in] st <tt>OpusDecoder*</tt>: Decoder state
+  * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
+  * @param [in] len <tt>opus_int32</tt>: Number of bytes in payload*
+  * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length
+  *  is frame_size*channels*sizeof(opus_int16)
+  * @param [in] frame_size Number of samples per channel of available space in \a pcm.
+  *  If this is less than the maximum packet duration (120ms; 5760 for 48kHz), this function will
+  *  not be capable of decoding some packets. In the case of PLC (data==NULL) or FEC (decode_fec=1),
+  *  then frame_size needs to be exactly the duration of audio that is missing, otherwise the
+  *  decoder will not be in the optimal state to decode the next incoming packet. For the PLC and
+  *  FEC cases, frame_size <b>must</b> be a multiple of 2.5 ms.
+  * @param [in] decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band forward error correction data be
+  *  decoded. If no such data is available, the frame is decoded as if it were lost.
+  * @returns Number of decoded samples or @ref opus_errorcodes
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decode(
+    OpusDecoder *st,
+    const unsigned char *data,
+    opus_int32 len,
+    opus_int16 *pcm,
+    int frame_size,
+    int decode_fec
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Decode an Opus packet with floating point output.
+  * @param [in] st <tt>OpusDecoder*</tt>: Decoder state
+  * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
+  * @param [in] len <tt>opus_int32</tt>: Number of bytes in payload
+  * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length
+  *  is frame_size*channels*sizeof(float)
+  * @param [in] frame_size Number of samples per channel of available space in \a pcm.
+  *  If this is less than the maximum packet duration (120ms; 5760 for 48kHz), this function will
+  *  not be capable of decoding some packets. In the case of PLC (data==NULL) or FEC (decode_fec=1),
+  *  then frame_size needs to be exactly the duration of audio that is missing, otherwise the
+  *  decoder will not be in the optimal state to decode the next incoming packet. For the PLC and
+  *  FEC cases, frame_size <b>must</b> be a multiple of 2.5 ms.
+  * @param [in] decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band forward error correction data be
+  *  decoded. If no such data is available the frame is decoded as if it were lost.
+  * @returns Number of decoded samples or @ref opus_errorcodes
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decode_float(
+    OpusDecoder *st,
+    const unsigned char *data,
+    opus_int32 len,
+    float *pcm,
+    int frame_size,
+    int decode_fec
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Perform a CTL function on an Opus decoder.
+  *
+  * Generally the request and subsequent arguments are generated
+  * by a convenience macro.
+  * @param st <tt>OpusDecoder*</tt>: Decoder state.
+  * @param request This and all remaining parameters should be replaced by one
+  *                of the convenience macros in @ref opus_genericctls or
+  *                @ref opus_decoderctls.
+  * @see opus_genericctls
+  * @see opus_decoderctls
+  */
+OPUS_EXPORT int opus_decoder_ctl(OpusDecoder *st, int request, ...) OPUS_ARG_NONNULL(1);
+
+/** Frees an <code>OpusDecoder</code> allocated by opus_decoder_create().
+  * @param[in] st <tt>OpusDecoder*</tt>: State to be freed.
+  */
+OPUS_EXPORT void opus_decoder_destroy(OpusDecoder *st);
+
+/** Parse an opus packet into one or more frames.
+  * Opus_decode will perform this operation internally so most applications do
+  * not need to use this function.
+  * This function does not copy the frames, the returned pointers are pointers into
+  * the input packet.
+  * @param [in] data <tt>char*</tt>: Opus packet to be parsed
+  * @param [in] len <tt>opus_int32</tt>: size of data
+  * @param [out] out_toc <tt>char*</tt>: TOC pointer
+  * @param [out] frames <tt>char*[48]</tt> encapsulated frames
+  * @param [out] size <tt>opus_int16[48]</tt> sizes of the encapsulated frames
+  * @param [out] payload_offset <tt>int*</tt>: returns the position of the payload within the packet (in bytes)
+  * @returns number of frames
+  */
+OPUS_EXPORT int opus_packet_parse(
+   const unsigned char *data,
+   opus_int32 len,
+   unsigned char *out_toc,
+   const unsigned char *frames[48],
+   opus_int16 size[48],
+   int *payload_offset
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(5);
+
+/** Gets the bandwidth of an Opus packet.
+  * @param [in] data <tt>char*</tt>: Opus packet
+  * @retval OPUS_BANDWIDTH_NARROWBAND Narrowband (4kHz bandpass)
+  * @retval OPUS_BANDWIDTH_MEDIUMBAND Mediumband (6kHz bandpass)
+  * @retval OPUS_BANDWIDTH_WIDEBAND Wideband (8kHz bandpass)
+  * @retval OPUS_BANDWIDTH_SUPERWIDEBAND Superwideband (12kHz bandpass)
+  * @retval OPUS_BANDWIDTH_FULLBAND Fullband (20kHz bandpass)
+  * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_bandwidth(const unsigned char *data) OPUS_ARG_NONNULL(1);
+
+/** Gets the number of samples per frame from an Opus packet.
+  * @param [in] data <tt>char*</tt>: Opus packet.
+  *                                  This must contain at least one byte of
+  *                                  data.
+  * @param [in] Fs <tt>opus_int32</tt>: Sampling rate in Hz.
+  *                                     This must be a multiple of 400, or
+  *                                     inaccurate results will be returned.
+  * @returns Number of samples per frame.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_samples_per_frame(const unsigned char *data, opus_int32 Fs) OPUS_ARG_NONNULL(1);
+
+/** Gets the number of channels from an Opus packet.
+  * @param [in] data <tt>char*</tt>: Opus packet
+  * @returns Number of channels
+  * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_channels(const unsigned char *data) OPUS_ARG_NONNULL(1);
+
+/** Gets the number of frames in an Opus packet.
+  * @param [in] packet <tt>char*</tt>: Opus packet
+  * @param [in] len <tt>opus_int32</tt>: Length of packet
+  * @returns Number of frames
+  * @retval OPUS_BAD_ARG Insufficient data was passed to the function
+  * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_frames(const unsigned char packet[], opus_int32 len) OPUS_ARG_NONNULL(1);
+
+/** Gets the number of samples of an Opus packet.
+  * @param [in] packet <tt>char*</tt>: Opus packet
+  * @param [in] len <tt>opus_int32</tt>: Length of packet
+  * @param [in] Fs <tt>opus_int32</tt>: Sampling rate in Hz.
+  *                                     This must be a multiple of 400, or
+  *                                     inaccurate results will be returned.
+  * @returns Number of samples
+  * @retval OPUS_BAD_ARG Insufficient data was passed to the function
+  * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_packet_get_nb_samples(const unsigned char packet[], opus_int32 len, opus_int32 Fs) OPUS_ARG_NONNULL(1);
+
+/** Gets the number of samples of an Opus packet.
+  * @param [in] dec <tt>OpusDecoder*</tt>: Decoder state
+  * @param [in] packet <tt>char*</tt>: Opus packet
+  * @param [in] len <tt>opus_int32</tt>: Length of packet
+  * @returns Number of samples
+  * @retval OPUS_BAD_ARG Insufficient data was passed to the function
+  * @retval OPUS_INVALID_PACKET The compressed data passed is corrupted or of an unsupported type
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_decoder_get_nb_samples(const OpusDecoder *dec, const unsigned char packet[], opus_int32 len) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
+
+/** Applies soft-clipping to bring a float signal within the [-1,1] range. If
+  * the signal is already in that range, nothing is done. If there are values
+  * outside of [-1,1], then the signal is clipped as smoothly as possible to
+  * both fit in the range and avoid creating excessive distortion in the
+  * process.
+  * @param [in,out] pcm <tt>float*</tt>: Input PCM and modified PCM
+  * @param [in] frame_size <tt>int</tt> Number of samples per channel to process
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @param [in,out] softclip_mem <tt>float*</tt>: State memory for the soft clipping process (one float per channel, initialized to zero)
+  */
+OPUS_EXPORT void opus_pcm_soft_clip(float *pcm, int frame_size, int channels, float *softclip_mem);
+
+
+/**@}*/
+
+/** @defgroup opus_repacketizer Repacketizer
+  * @{
+  *
+  * The repacketizer can be used to merge multiple Opus packets into a single
+  * packet or alternatively to split Opus packets that have previously been
+  * merged. Splitting valid Opus packets is always guaranteed to succeed,
+  * whereas merging valid packets only succeeds if all frames have the same
+  * mode, bandwidth, and frame size, and when the total duration of the merged
+  * packet is no more than 120 ms. The 120 ms limit comes from the
+  * specification and limits decoder memory requirements at a point where
+  * framing overhead becomes negligible.
+  *
+  * The repacketizer currently only operates on elementary Opus
+  * streams. It will not manipualte multistream packets successfully, except in
+  * the degenerate case where they consist of data from a single stream.
+  *
+  * The repacketizing process starts with creating a repacketizer state, either
+  * by calling opus_repacketizer_create() or by allocating the memory yourself,
+  * e.g.,
+  * @code
+  * OpusRepacketizer *rp;
+  * rp = (OpusRepacketizer*)malloc(opus_repacketizer_get_size());
+  * if (rp != NULL)
+  *     opus_repacketizer_init(rp);
+  * @endcode
+  *
+  * Then the application should submit packets with opus_repacketizer_cat(),
+  * extract new packets with opus_repacketizer_out() or
+  * opus_repacketizer_out_range(), and then reset the state for the next set of
+  * input packets via opus_repacketizer_init().
+  *
+  * For example, to split a sequence of packets into individual frames:
+  * @code
+  * unsigned char *data;
+  * int len;
+  * while (get_next_packet(&data, &len))
+  * {
+  *   unsigned char out[1276];
+  *   opus_int32 out_len;
+  *   int nb_frames;
+  *   int err;
+  *   int i;
+  *   err = opus_repacketizer_cat(rp, data, len);
+  *   if (err != OPUS_OK)
+  *   {
+  *     release_packet(data);
+  *     return err;
+  *   }
+  *   nb_frames = opus_repacketizer_get_nb_frames(rp);
+  *   for (i = 0; i < nb_frames; i++)
+  *   {
+  *     out_len = opus_repacketizer_out_range(rp, i, i+1, out, sizeof(out));
+  *     if (out_len < 0)
+  *     {
+  *        release_packet(data);
+  *        return (int)out_len;
+  *     }
+  *     output_next_packet(out, out_len);
+  *   }
+  *   opus_repacketizer_init(rp);
+  *   release_packet(data);
+  * }
+  * @endcode
+  *
+  * Alternatively, to combine a sequence of frames into packets that each
+  * contain up to <code>TARGET_DURATION_MS</code> milliseconds of data:
+  * @code
+  * // The maximum number of packets with duration TARGET_DURATION_MS occurs
+  * // when the frame size is 2.5 ms, for a total of (TARGET_DURATION_MS*2/5)
+  * // packets.
+  * unsigned char *data[(TARGET_DURATION_MS*2/5)+1];
+  * opus_int32 len[(TARGET_DURATION_MS*2/5)+1];
+  * int nb_packets;
+  * unsigned char out[1277*(TARGET_DURATION_MS*2/2)];
+  * opus_int32 out_len;
+  * int prev_toc;
+  * nb_packets = 0;
+  * while (get_next_packet(data+nb_packets, len+nb_packets))
+  * {
+  *   int nb_frames;
+  *   int err;
+  *   nb_frames = opus_packet_get_nb_frames(data[nb_packets], len[nb_packets]);
+  *   if (nb_frames < 1)
+  *   {
+  *     release_packets(data, nb_packets+1);
+  *     return nb_frames;
+  *   }
+  *   nb_frames += opus_repacketizer_get_nb_frames(rp);
+  *   // If adding the next packet would exceed our target, or it has an
+  *   // incompatible TOC sequence, output the packets we already have before
+  *   // submitting it.
+  *   // N.B., The nb_packets > 0 check ensures we've submitted at least one
+  *   // packet since the last call to opus_repacketizer_init(). Otherwise a
+  *   // single packet longer than TARGET_DURATION_MS would cause us to try to
+  *   // output an (invalid) empty packet. It also ensures that prev_toc has
+  *   // been set to a valid value. Additionally, len[nb_packets] > 0 is
+  *   // guaranteed by the call to opus_packet_get_nb_frames() above, so the
+  *   // reference to data[nb_packets][0] should be valid.
+  *   if (nb_packets > 0 && (
+  *       ((prev_toc & 0xFC) != (data[nb_packets][0] & 0xFC)) ||
+  *       opus_packet_get_samples_per_frame(data[nb_packets], 48000)*nb_frames >
+  *       TARGET_DURATION_MS*48))
+  *   {
+  *     out_len = opus_repacketizer_out(rp, out, sizeof(out));
+  *     if (out_len < 0)
+  *     {
+  *        release_packets(data, nb_packets+1);
+  *        return (int)out_len;
+  *     }
+  *     output_next_packet(out, out_len);
+  *     opus_repacketizer_init(rp);
+  *     release_packets(data, nb_packets);
+  *     data[0] = data[nb_packets];
+  *     len[0] = len[nb_packets];
+  *     nb_packets = 0;
+  *   }
+  *   err = opus_repacketizer_cat(rp, data[nb_packets], len[nb_packets]);
+  *   if (err != OPUS_OK)
+  *   {
+  *     release_packets(data, nb_packets+1);
+  *     return err;
+  *   }
+  *   prev_toc = data[nb_packets][0];
+  *   nb_packets++;
+  * }
+  * // Output the final, partial packet.
+  * if (nb_packets > 0)
+  * {
+  *   out_len = opus_repacketizer_out(rp, out, sizeof(out));
+  *   release_packets(data, nb_packets);
+  *   if (out_len < 0)
+  *     return (int)out_len;
+  *   output_next_packet(out, out_len);
+  * }
+  * @endcode
+  *
+  * An alternate way of merging packets is to simply call opus_repacketizer_cat()
+  * unconditionally until it fails. At that point, the merged packet can be
+  * obtained with opus_repacketizer_out() and the input packet for which
+  * opus_repacketizer_cat() needs to be re-added to a newly reinitialized
+  * repacketizer state.
+  */
+
+typedef struct OpusRepacketizer OpusRepacketizer;
+
+/** Gets the size of an <code>OpusRepacketizer</code> structure.
+  * @returns The size in bytes.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_repacketizer_get_size(void);
+
+/** (Re)initializes a previously allocated repacketizer state.
+  * The state must be at least the size returned by opus_repacketizer_get_size().
+  * This can be used for applications which use their own allocator instead of
+  * malloc().
+  * It must also be called to reset the queue of packets waiting to be
+  * repacketized, which is necessary if the maximum packet duration of 120 ms
+  * is reached or if you wish to submit packets with a different Opus
+  * configuration (coding mode, audio bandwidth, frame size, or channel count).
+  * Failure to do so will prevent a new packet from being added with
+  * opus_repacketizer_cat().
+  * @see opus_repacketizer_create
+  * @see opus_repacketizer_get_size
+  * @see opus_repacketizer_cat
+  * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state to
+  *                                       (re)initialize.
+  * @returns A pointer to the same repacketizer state that was passed in.
+  */
+OPUS_EXPORT OpusRepacketizer *opus_repacketizer_init(OpusRepacketizer *rp) OPUS_ARG_NONNULL(1);
+
+/** Allocates memory and initializes the new repacketizer with
+ * opus_repacketizer_init().
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusRepacketizer *opus_repacketizer_create(void);
+
+/** Frees an <code>OpusRepacketizer</code> allocated by
+  * opus_repacketizer_create().
+  * @param[in] rp <tt>OpusRepacketizer*</tt>: State to be freed.
+  */
+OPUS_EXPORT void opus_repacketizer_destroy(OpusRepacketizer *rp);
+
+/** Add a packet to the current repacketizer state.
+  * This packet must match the configuration of any packets already submitted
+  * for repacketization since the last call to opus_repacketizer_init().
+  * This means that it must have the same coding mode, audio bandwidth, frame
+  * size, and channel count.
+  * This can be checked in advance by examining the top 6 bits of the first
+  * byte of the packet, and ensuring they match the top 6 bits of the first
+  * byte of any previously submitted packet.
+  * The total duration of audio in the repacketizer state also must not exceed
+  * 120 ms, the maximum duration of a single packet, after adding this packet.
+  *
+  * The contents of the current repacketizer state can be extracted into new
+  * packets using opus_repacketizer_out() or opus_repacketizer_out_range().
+  *
+  * In order to add a packet with a different configuration or to add more
+  * audio beyond 120 ms, you must clear the repacketizer state by calling
+  * opus_repacketizer_init().
+  * If a packet is too large to add to the current repacketizer state, no part
+  * of it is added, even if it contains multiple frames, some of which might
+  * fit.
+  * If you wish to be able to add parts of such packets, you should first use
+  * another repacketizer to split the packet into pieces and add them
+  * individually.
+  * @see opus_repacketizer_out_range
+  * @see opus_repacketizer_out
+  * @see opus_repacketizer_init
+  * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state to which to
+  *                                       add the packet.
+  * @param[in] data <tt>const unsigned char*</tt>: The packet data.
+  *                                                The application must ensure
+  *                                                this pointer remains valid
+  *                                                until the next call to
+  *                                                opus_repacketizer_init() or
+  *                                                opus_repacketizer_destroy().
+  * @param len <tt>opus_int32</tt>: The number of bytes in the packet data.
+  * @returns An error code indicating whether or not the operation succeeded.
+  * @retval #OPUS_OK The packet's contents have been added to the repacketizer
+  *                  state.
+  * @retval #OPUS_INVALID_PACKET The packet did not have a valid TOC sequence,
+  *                              the packet's TOC sequence was not compatible
+  *                              with previously submitted packets (because
+  *                              the coding mode, audio bandwidth, frame size,
+  *                              or channel count did not match), or adding
+  *                              this packet would increase the total amount of
+  *                              audio stored in the repacketizer state to more
+  *                              than 120 ms.
+  */
+OPUS_EXPORT int opus_repacketizer_cat(OpusRepacketizer *rp, const unsigned char *data, opus_int32 len) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
+
+
+/** Construct a new packet from data previously submitted to the repacketizer
+  * state via opus_repacketizer_cat().
+  * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state from which to
+  *                                       construct the new packet.
+  * @param begin <tt>int</tt>: The index of the first frame in the current
+  *                            repacketizer state to include in the output.
+  * @param end <tt>int</tt>: One past the index of the last frame in the
+  *                          current repacketizer state to include in the
+  *                          output.
+  * @param[out] data <tt>const unsigned char*</tt>: The buffer in which to
+  *                                                 store the output packet.
+  * @param maxlen <tt>opus_int32</tt>: The maximum number of bytes to store in
+  *                                    the output buffer. In order to guarantee
+  *                                    success, this should be at least
+  *                                    <code>1276</code> for a single frame,
+  *                                    or for multiple frames,
+  *                                    <code>1277*(end-begin)</code>.
+  *                                    However, <code>1*(end-begin)</code> plus
+  *                                    the size of all packet data submitted to
+  *                                    the repacketizer since the last call to
+  *                                    opus_repacketizer_init() or
+  *                                    opus_repacketizer_create() is also
+  *                                    sufficient, and possibly much smaller.
+  * @returns The total size of the output packet on success, or an error code
+  *          on failure.
+  * @retval #OPUS_BAD_ARG <code>[begin,end)</code> was an invalid range of
+  *                       frames (begin < 0, begin >= end, or end >
+  *                       opus_repacketizer_get_nb_frames()).
+  * @retval #OPUS_BUFFER_TOO_SMALL \a maxlen was insufficient to contain the
+  *                                complete output packet.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_repacketizer_out_range(OpusRepacketizer *rp, int begin, int end, unsigned char *data, opus_int32 maxlen) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Return the total number of frames contained in packet data submitted to
+  * the repacketizer state so far via opus_repacketizer_cat() since the last
+  * call to opus_repacketizer_init() or opus_repacketizer_create().
+  * This defines the valid range of packets that can be extracted with
+  * opus_repacketizer_out_range() or opus_repacketizer_out().
+  * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state containing the
+  *                                       frames.
+  * @returns The total number of frames contained in the packet data submitted
+  *          to the repacketizer state.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_repacketizer_get_nb_frames(OpusRepacketizer *rp) OPUS_ARG_NONNULL(1);
+
+/** Construct a new packet from data previously submitted to the repacketizer
+  * state via opus_repacketizer_cat().
+  * This is a convenience routine that returns all the data submitted so far
+  * in a single packet.
+  * It is equivalent to calling
+  * @code
+  * opus_repacketizer_out_range(rp, 0, opus_repacketizer_get_nb_frames(rp),
+  *                             data, maxlen)
+  * @endcode
+  * @param rp <tt>OpusRepacketizer*</tt>: The repacketizer state from which to
+  *                                       construct the new packet.
+  * @param[out] data <tt>const unsigned char*</tt>: The buffer in which to
+  *                                                 store the output packet.
+  * @param maxlen <tt>opus_int32</tt>: The maximum number of bytes to store in
+  *                                    the output buffer. In order to guarantee
+  *                                    success, this should be at least
+  *                                    <code>1277*opus_repacketizer_get_nb_frames(rp)</code>.
+  *                                    However,
+  *                                    <code>1*opus_repacketizer_get_nb_frames(rp)</code>
+  *                                    plus the size of all packet data
+  *                                    submitted to the repacketizer since the
+  *                                    last call to opus_repacketizer_init() or
+  *                                    opus_repacketizer_create() is also
+  *                                    sufficient, and possibly much smaller.
+  * @returns The total size of the output packet on success, or an error code
+  *          on failure.
+  * @retval #OPUS_BUFFER_TOO_SMALL \a maxlen was insufficient to contain the
+  *                                complete output packet.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_repacketizer_out(OpusRepacketizer *rp, unsigned char *data, opus_int32 maxlen) OPUS_ARG_NONNULL(1);
+
+/** Pads a given Opus packet to a larger size (possibly changing the TOC sequence).
+  * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
+  *                                                   packet to pad.
+  * @param len <tt>opus_int32</tt>: The size of the packet.
+  *                                 This must be at least 1.
+  * @param new_len <tt>opus_int32</tt>: The desired size of the packet after padding.
+  *                                 This must be at least as large as len.
+  * @returns an error code
+  * @retval #OPUS_OK \a on success.
+  * @retval #OPUS_BAD_ARG \a len was less than 1 or new_len was less than len.
+  * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
+  */
+OPUS_EXPORT int opus_packet_pad(unsigned char *data, opus_int32 len, opus_int32 new_len);
+
+/** Remove all padding from a given Opus packet and rewrite the TOC sequence to
+  * minimize space usage.
+  * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
+  *                                                   packet to strip.
+  * @param len <tt>opus_int32</tt>: The size of the packet.
+  *                                 This must be at least 1.
+  * @returns The new size of the output packet on success, or an error code
+  *          on failure.
+  * @retval #OPUS_BAD_ARG \a len was less than 1.
+  * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_packet_unpad(unsigned char *data, opus_int32 len);
+
+/** Pads a given Opus multi-stream packet to a larger size (possibly changing the TOC sequence).
+  * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
+  *                                                   packet to pad.
+  * @param len <tt>opus_int32</tt>: The size of the packet.
+  *                                 This must be at least 1.
+  * @param new_len <tt>opus_int32</tt>: The desired size of the packet after padding.
+  *                                 This must be at least 1.
+  * @param nb_streams <tt>opus_int32</tt>: The number of streams (not channels) in the packet.
+  *                                 This must be at least as large as len.
+  * @returns an error code
+  * @retval #OPUS_OK \a on success.
+  * @retval #OPUS_BAD_ARG \a len was less than 1.
+  * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
+  */
+OPUS_EXPORT int opus_multistream_packet_pad(unsigned char *data, opus_int32 len, opus_int32 new_len, int nb_streams);
+
+/** Remove all padding from a given Opus multi-stream packet and rewrite the TOC sequence to
+  * minimize space usage.
+  * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
+  *                                                   packet to strip.
+  * @param len <tt>opus_int32</tt>: The size of the packet.
+  *                                 This must be at least 1.
+  * @param nb_streams <tt>opus_int32</tt>: The number of streams (not channels) in the packet.
+  *                                 This must be at least 1.
+  * @returns The new size of the output packet on success, or an error code
+  *          on failure.
+  * @retval #OPUS_BAD_ARG \a len was less than 1 or new_len was less than len.
+  * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_packet_unpad(unsigned char *data, opus_int32 len, int nb_streams);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OPUS_H */

pkg/codec/opus/include/opus_custom.h

@@ -0,0 +1,342 @@
+/* Copyright (c) 2007-2008 CSIRO
+   Copyright (c) 2007-2009 Xiph.Org Foundation
+   Copyright (c) 2008-2012 Gregory Maxwell
+   Written by Jean-Marc Valin and Gregory Maxwell */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/**
+  @file opus_custom.h
+  @brief Opus-Custom reference implementation API
+ */
+
+#ifndef OPUS_CUSTOM_H
+#define OPUS_CUSTOM_H
+
+#include "opus_defines.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef CUSTOM_MODES
+# define OPUS_CUSTOM_EXPORT OPUS_EXPORT
+# define OPUS_CUSTOM_EXPORT_STATIC OPUS_EXPORT
+#else
+# define OPUS_CUSTOM_EXPORT
+# ifdef OPUS_BUILD
+#  define OPUS_CUSTOM_EXPORT_STATIC static OPUS_INLINE
+# else
+#  define OPUS_CUSTOM_EXPORT_STATIC
+# endif
+#endif
+
+/** @defgroup opus_custom Opus Custom
+  * @{
+  *  Opus Custom is an optional part of the Opus specification and
+  * reference implementation which uses a distinct API from the regular
+  * API and supports frame sizes that are not normally supported.\ Use
+  * of Opus Custom is discouraged for all but very special applications
+  * for which a frame size different from 2.5, 5, 10, or 20 ms is needed
+  * (for either complexity or latency reasons) and where interoperability
+  * is less important.
+  *
+  * In addition to the interoperability limitations the use of Opus custom
+  * disables a substantial chunk of the codec and generally lowers the
+  * quality available at a given bitrate. Normally when an application needs
+  * a different frame size from the codec it should buffer to match the
+  * sizes but this adds a small amount of delay which may be important
+  * in some very low latency applications. Some transports (especially
+  * constant rate RF transports) may also work best with frames of
+  * particular durations.
+  *
+  * Libopus only supports custom modes if they are enabled at compile time.
+  *
+  * The Opus Custom API is similar to the regular API but the
+  * @ref opus_encoder_create and @ref opus_decoder_create calls take
+  * an additional mode parameter which is a structure produced by
+  * a call to @ref opus_custom_mode_create. Both the encoder and decoder
+  * must create a mode using the same sample rate (fs) and frame size
+  * (frame size) so these parameters must either be signaled out of band
+  * or fixed in a particular implementation.
+  *
+  * Similar to regular Opus the custom modes support on the fly frame size
+  * switching, but the sizes available depend on the particular frame size in
+  * use. For some initial frame sizes on a single on the fly size is available.
+  */
+
+/** Contains the state of an encoder. One encoder state is needed
+    for each stream. It is initialized once at the beginning of the
+    stream. Do *not* re-initialize the state for every frame.
+   @brief Encoder state
+ */
+typedef struct OpusCustomEncoder OpusCustomEncoder;
+
+/** State of the decoder. One decoder state is needed for each stream.
+    It is initialized once at the beginning of the stream. Do *not*
+    re-initialize the state for every frame.
+   @brief Decoder state
+ */
+typedef struct OpusCustomDecoder OpusCustomDecoder;
+
+/** The mode contains all the information necessary to create an
+    encoder. Both the encoder and decoder need to be initialized
+    with exactly the same mode, otherwise the output will be
+    corrupted.
+   @brief Mode configuration
+ */
+typedef struct OpusCustomMode OpusCustomMode;
+
+/** Creates a new mode struct. This will be passed to an encoder or
+  * decoder. The mode MUST NOT BE DESTROYED until the encoders and
+  * decoders that use it are destroyed as well.
+  * @param [in] Fs <tt>int</tt>: Sampling rate (8000 to 96000 Hz)
+  * @param [in] frame_size <tt>int</tt>: Number of samples (per channel) to encode in each
+  *        packet (64 - 1024, prime factorization must contain zero or more 2s, 3s, or 5s and no other primes)
+  * @param [out] error <tt>int*</tt>: Returned error code (if NULL, no error will be returned)
+  * @return A newly created mode
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomMode *opus_custom_mode_create(opus_int32 Fs, int frame_size, int *error);
+
+/** Destroys a mode struct. Only call this after all encoders and
+  * decoders using this mode are destroyed as well.
+  * @param [in] mode <tt>OpusCustomMode*</tt>: Mode to be freed.
+  */
+OPUS_CUSTOM_EXPORT void opus_custom_mode_destroy(OpusCustomMode *mode);
+
+
+#if !defined(OPUS_BUILD) || defined(CELT_ENCODER_C)
+
+/* Encoder */
+/** Gets the size of an OpusCustomEncoder structure.
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @returns size
+  */
+OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_encoder_get_size(
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1);
+
+# ifdef CUSTOM_MODES
+/** Initializes a previously allocated encoder state
+  * The memory pointed to by st must be the size returned by opus_custom_encoder_get_size.
+  * This is intended for applications which use their own allocator instead of malloc.
+  * @see opus_custom_encoder_create(),opus_custom_encoder_get_size()
+  * To reset a previously initialized state use the OPUS_RESET_STATE CTL.
+  * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of
+  *  the stream (must be the same characteristics as used for the
+  *  decoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @return OPUS_OK Success or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT int opus_custom_encoder_init(
+    OpusCustomEncoder *st,
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
+# endif
+#endif
+
+
+/** Creates a new encoder state. Each stream needs its own encoder
+  * state (can't be shared across simultaneous streams).
+  * @param [in] mode <tt>OpusCustomMode*</tt>: Contains all the information about the characteristics of
+  *  the stream (must be the same characteristics as used for the
+  *  decoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @param [out] error <tt>int*</tt>: Returns an error code
+  * @return Newly created encoder state.
+*/
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomEncoder *opus_custom_encoder_create(
+    const OpusCustomMode *mode,
+    int channels,
+    int *error
+) OPUS_ARG_NONNULL(1);
+
+
+/** Destroys a an encoder state.
+  * @param[in] st <tt>OpusCustomEncoder*</tt>: State to be freed.
+  */
+OPUS_CUSTOM_EXPORT void opus_custom_encoder_destroy(OpusCustomEncoder *st);
+
+/** Encodes a frame of audio.
+  * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state
+  * @param [in] pcm <tt>float*</tt>: PCM audio in float format, with a normal range of +/-1.0.
+  *          Samples with a range beyond +/-1.0 are supported but will
+  *          be clipped by decoders using the integer API and should
+  *          only be used if it is known that the far end supports
+  *          extended dynamic range. There must be exactly
+  *          frame_size samples per channel.
+  * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal
+  * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long.
+  * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame
+  *          (can change from one frame to another)
+  * @return Number of bytes written to "compressed".
+  *       If negative, an error has occurred (see error codes). It is IMPORTANT that
+  *       the length returned be somehow transmitted to the decoder. Otherwise, no
+  *       decoding is possible.
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode_float(
+    OpusCustomEncoder *st,
+    const float *pcm,
+    int frame_size,
+    unsigned char *compressed,
+    int maxCompressedBytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Encodes a frame of audio.
+  * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state
+  * @param [in] pcm <tt>opus_int16*</tt>: PCM audio in signed 16-bit format (native endian).
+  *          There must be exactly frame_size samples per channel.
+  * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal
+  * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long.
+  * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame
+  *          (can change from one frame to another)
+  * @return Number of bytes written to "compressed".
+  *       If negative, an error has occurred (see error codes). It is IMPORTANT that
+  *       the length returned be somehow transmitted to the decoder. Otherwise, no
+  *       decoding is possible.
+ */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode(
+    OpusCustomEncoder *st,
+    const opus_int16 *pcm,
+    int frame_size,
+    unsigned char *compressed,
+    int maxCompressedBytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Perform a CTL function on an Opus custom encoder.
+  *
+  * Generally the request and subsequent arguments are generated
+  * by a convenience macro.
+  * @see opus_encoderctls
+  */
+OPUS_CUSTOM_EXPORT int opus_custom_encoder_ctl(OpusCustomEncoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1);
+
+
+#if !defined(OPUS_BUILD) || defined(CELT_DECODER_C)
+/* Decoder */
+
+/** Gets the size of an OpusCustomDecoder structure.
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @returns size
+  */
+OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_decoder_get_size(
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1);
+
+/** Initializes a previously allocated decoder state
+  * The memory pointed to by st must be the size returned by opus_custom_decoder_get_size.
+  * This is intended for applications which use their own allocator instead of malloc.
+  * @see opus_custom_decoder_create(),opus_custom_decoder_get_size()
+  * To reset a previously initialized state use the OPUS_RESET_STATE CTL.
+  * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of
+  *  the stream (must be the same characteristics as used for the
+  *  encoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @return OPUS_OK Success or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT_STATIC int opus_custom_decoder_init(
+    OpusCustomDecoder *st,
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
+
+#endif
+
+
+/** Creates a new decoder state. Each stream needs its own decoder state (can't
+  * be shared across simultaneous streams).
+  * @param [in] mode <tt>OpusCustomMode</tt>: Contains all the information about the characteristics of the
+  *          stream (must be the same characteristics as used for the encoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @param [out] error <tt>int*</tt>: Returns an error code
+  * @return Newly created decoder state.
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomDecoder *opus_custom_decoder_create(
+    const OpusCustomMode *mode,
+    int channels,
+    int *error
+) OPUS_ARG_NONNULL(1);
+
+/** Destroys a an decoder state.
+  * @param[in] st <tt>OpusCustomDecoder*</tt>: State to be freed.
+  */
+OPUS_CUSTOM_EXPORT void opus_custom_decoder_destroy(OpusCustomDecoder *st);
+
+/** Decode an opus custom frame with floating point output
+  * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state
+  * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
+  * @param [in] len <tt>int</tt>: Number of bytes in payload
+  * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length
+  *  is frame_size*channels*sizeof(float)
+  * @param [in] frame_size Number of samples per channel of available space in *pcm.
+  * @returns Number of decoded samples or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode_float(
+    OpusCustomDecoder *st,
+    const unsigned char *data,
+    int len,
+    float *pcm,
+    int frame_size
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Decode an opus custom frame
+  * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state
+  * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
+  * @param [in] len <tt>int</tt>: Number of bytes in payload
+  * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length
+  *  is frame_size*channels*sizeof(opus_int16)
+  * @param [in] frame_size Number of samples per channel of available space in *pcm.
+  * @returns Number of decoded samples or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode(
+    OpusCustomDecoder *st,
+    const unsigned char *data,
+    int len,
+    opus_int16 *pcm,
+    int frame_size
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Perform a CTL function on an Opus custom decoder.
+  *
+  * Generally the request and subsequent arguments are generated
+  * by a convenience macro.
+  * @see opus_genericctls
+  */
+OPUS_CUSTOM_EXPORT int opus_custom_decoder_ctl(OpusCustomDecoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OPUS_CUSTOM_H */

pkg/codec/opus/include/opus_defines.h

@@ -0,0 +1,799 @@
+/* Copyright (c) 2010-2011 Xiph.Org Foundation, Skype Limited
+   Written by Jean-Marc Valin and Koen Vos */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/**
+ * @file opus_defines.h
+ * @brief Opus reference implementation constants
+ */
+
+#ifndef OPUS_DEFINES_H
+#define OPUS_DEFINES_H
+
+#include "opus_types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @defgroup opus_errorcodes Error codes
+ * @{
+ */
+/** No error @hideinitializer*/
+#define OPUS_OK                0
+/** One or more invalid/out of range arguments @hideinitializer*/
+#define OPUS_BAD_ARG          -1
+/** Not enough bytes allocated in the buffer @hideinitializer*/
+#define OPUS_BUFFER_TOO_SMALL -2
+/** An internal error was detected @hideinitializer*/
+#define OPUS_INTERNAL_ERROR   -3
+/** The compressed data passed is corrupted @hideinitializer*/
+#define OPUS_INVALID_PACKET   -4
+/** Invalid/unsupported request number @hideinitializer*/
+#define OPUS_UNIMPLEMENTED    -5
+/** An encoder or decoder structure is invalid or already freed @hideinitializer*/
+#define OPUS_INVALID_STATE    -6
+/** Memory allocation has failed @hideinitializer*/
+#define OPUS_ALLOC_FAIL       -7
+/**@}*/
+
+/** @cond OPUS_INTERNAL_DOC */
+/**Export control for opus functions */
+
+#ifndef OPUS_EXPORT
+# if defined(WIN32)
+#  if defined(OPUS_BUILD) && defined(DLL_EXPORT)
+#   define OPUS_EXPORT __declspec(dllexport)
+#  else
+#   define OPUS_EXPORT
+#  endif
+# elif defined(__GNUC__) && defined(OPUS_BUILD)
+#  define OPUS_EXPORT __attribute__ ((visibility ("default")))
+# else
+#  define OPUS_EXPORT
+# endif
+#endif
+
+# if !defined(OPUS_GNUC_PREREQ)
+#  if defined(__GNUC__)&&defined(__GNUC_MINOR__)
+#   define OPUS_GNUC_PREREQ(_maj,_min) \
+ ((__GNUC__<<16)+__GNUC_MINOR__>=((_maj)<<16)+(_min))
+#  else
+#   define OPUS_GNUC_PREREQ(_maj,_min) 0
+#  endif
+# endif
+
+#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) )
+# if OPUS_GNUC_PREREQ(3,0)
+#  define OPUS_RESTRICT __restrict__
+# elif (defined(_MSC_VER) && _MSC_VER >= 1400)
+#  define OPUS_RESTRICT __restrict
+# else
+#  define OPUS_RESTRICT
+# endif
+#else
+# define OPUS_RESTRICT restrict
+#endif
+
+#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) )
+# if OPUS_GNUC_PREREQ(2,7)
+#  define OPUS_INLINE __inline__
+# elif (defined(_MSC_VER))
+#  define OPUS_INLINE __inline
+# else
+#  define OPUS_INLINE
+# endif
+#else
+# define OPUS_INLINE inline
+#endif
+
+/**Warning attributes for opus functions
+  * NONNULL is not used in OPUS_BUILD to avoid the compiler optimizing out
+  * some paranoid null checks. */
+#if defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4)
+# define OPUS_WARN_UNUSED_RESULT __attribute__ ((__warn_unused_result__))
+#else
+# define OPUS_WARN_UNUSED_RESULT
+#endif
+#if !defined(OPUS_BUILD) && defined(__GNUC__) && OPUS_GNUC_PREREQ(3, 4)
+# define OPUS_ARG_NONNULL(_x)  __attribute__ ((__nonnull__(_x)))
+#else
+# define OPUS_ARG_NONNULL(_x)
+#endif
+
+/** These are the actual Encoder CTL ID numbers.
+  * They should not be used directly by applications.
+  * In general, SETs should be even and GETs should be odd.*/
+#define OPUS_SET_APPLICATION_REQUEST         4000
+#define OPUS_GET_APPLICATION_REQUEST         4001
+#define OPUS_SET_BITRATE_REQUEST             4002
+#define OPUS_GET_BITRATE_REQUEST             4003
+#define OPUS_SET_MAX_BANDWIDTH_REQUEST       4004
+#define OPUS_GET_MAX_BANDWIDTH_REQUEST       4005
+#define OPUS_SET_VBR_REQUEST                 4006
+#define OPUS_GET_VBR_REQUEST                 4007
+#define OPUS_SET_BANDWIDTH_REQUEST           4008
+#define OPUS_GET_BANDWIDTH_REQUEST           4009
+#define OPUS_SET_COMPLEXITY_REQUEST          4010
+#define OPUS_GET_COMPLEXITY_REQUEST          4011
+#define OPUS_SET_INBAND_FEC_REQUEST          4012
+#define OPUS_GET_INBAND_FEC_REQUEST          4013
+#define OPUS_SET_PACKET_LOSS_PERC_REQUEST    4014
+#define OPUS_GET_PACKET_LOSS_PERC_REQUEST    4015
+#define OPUS_SET_DTX_REQUEST                 4016
+#define OPUS_GET_DTX_REQUEST                 4017
+#define OPUS_SET_VBR_CONSTRAINT_REQUEST      4020
+#define OPUS_GET_VBR_CONSTRAINT_REQUEST      4021
+#define OPUS_SET_FORCE_CHANNELS_REQUEST      4022
+#define OPUS_GET_FORCE_CHANNELS_REQUEST      4023
+#define OPUS_SET_SIGNAL_REQUEST              4024
+#define OPUS_GET_SIGNAL_REQUEST              4025
+#define OPUS_GET_LOOKAHEAD_REQUEST           4027
+/* #define OPUS_RESET_STATE 4028 */
+#define OPUS_GET_SAMPLE_RATE_REQUEST         4029
+#define OPUS_GET_FINAL_RANGE_REQUEST         4031
+#define OPUS_GET_PITCH_REQUEST               4033
+#define OPUS_SET_GAIN_REQUEST                4034
+#define OPUS_GET_GAIN_REQUEST                4045 /* Should have been 4035 */
+#define OPUS_SET_LSB_DEPTH_REQUEST           4036
+#define OPUS_GET_LSB_DEPTH_REQUEST           4037
+#define OPUS_GET_LAST_PACKET_DURATION_REQUEST 4039
+#define OPUS_SET_EXPERT_FRAME_DURATION_REQUEST 4040
+#define OPUS_GET_EXPERT_FRAME_DURATION_REQUEST 4041
+#define OPUS_SET_PREDICTION_DISABLED_REQUEST 4042
+#define OPUS_GET_PREDICTION_DISABLED_REQUEST 4043
+/* Don't use 4045, it's already taken by OPUS_GET_GAIN_REQUEST */
+#define OPUS_SET_PHASE_INVERSION_DISABLED_REQUEST 4046
+#define OPUS_GET_PHASE_INVERSION_DISABLED_REQUEST 4047
+#define OPUS_GET_IN_DTX_REQUEST              4049
+
+/** Defines for the presence of extended APIs. */
+#define OPUS_HAVE_OPUS_PROJECTION_H
+
+/* Macros to trigger compilation errors when the wrong types are provided to a CTL */
+#define __opus_check_int(x) (((void)((x) == (opus_int32)0)), (opus_int32)(x))
+#define __opus_check_int_ptr(ptr) ((ptr) + ((ptr) - (opus_int32*)(ptr)))
+#define __opus_check_uint_ptr(ptr) ((ptr) + ((ptr) - (opus_uint32*)(ptr)))
+#define __opus_check_val16_ptr(ptr) ((ptr) + ((ptr) - (opus_val16*)(ptr)))
+/** @endcond */
+
+/** @defgroup opus_ctlvalues Pre-defined values for CTL interface
+  * @see opus_genericctls, opus_encoderctls
+  * @{
+  */
+/* Values for the various encoder CTLs */
+#define OPUS_AUTO                           -1000 /**<Auto/default setting @hideinitializer*/
+#define OPUS_BITRATE_MAX                       -1 /**<Maximum bitrate @hideinitializer*/
+
+/** Best for most VoIP/videoconference applications where listening quality and intelligibility matter most
+ * @hideinitializer */
+#define OPUS_APPLICATION_VOIP                2048
+/** Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input
+ * @hideinitializer */
+#define OPUS_APPLICATION_AUDIO               2049
+/** Only use when lowest-achievable latency is what matters most. Voice-optimized modes cannot be used.
+ * @hideinitializer */
+#define OPUS_APPLICATION_RESTRICTED_LOWDELAY 2051
+
+#define OPUS_SIGNAL_VOICE                    3001 /**< Signal being encoded is voice */
+#define OPUS_SIGNAL_MUSIC                    3002 /**< Signal being encoded is music */
+#define OPUS_BANDWIDTH_NARROWBAND            1101 /**< 4 kHz bandpass @hideinitializer*/
+#define OPUS_BANDWIDTH_MEDIUMBAND            1102 /**< 6 kHz bandpass @hideinitializer*/
+#define OPUS_BANDWIDTH_WIDEBAND              1103 /**< 8 kHz bandpass @hideinitializer*/
+#define OPUS_BANDWIDTH_SUPERWIDEBAND         1104 /**<12 kHz bandpass @hideinitializer*/
+#define OPUS_BANDWIDTH_FULLBAND              1105 /**<20 kHz bandpass @hideinitializer*/
+
+#define OPUS_FRAMESIZE_ARG                   5000 /**< Select frame size from the argument (default) */
+#define OPUS_FRAMESIZE_2_5_MS                5001 /**< Use 2.5 ms frames */
+#define OPUS_FRAMESIZE_5_MS                  5002 /**< Use 5 ms frames */
+#define OPUS_FRAMESIZE_10_MS                 5003 /**< Use 10 ms frames */
+#define OPUS_FRAMESIZE_20_MS                 5004 /**< Use 20 ms frames */
+#define OPUS_FRAMESIZE_40_MS                 5005 /**< Use 40 ms frames */
+#define OPUS_FRAMESIZE_60_MS                 5006 /**< Use 60 ms frames */
+#define OPUS_FRAMESIZE_80_MS                 5007 /**< Use 80 ms frames */
+#define OPUS_FRAMESIZE_100_MS                5008 /**< Use 100 ms frames */
+#define OPUS_FRAMESIZE_120_MS                5009 /**< Use 120 ms frames */
+
+/**@}*/
+
+
+/** @defgroup opus_encoderctls Encoder related CTLs
+  *
+  * These are convenience macros for use with the \c opus_encode_ctl
+  * interface. They are used to generate the appropriate series of
+  * arguments for that call, passing the correct type, size and so
+  * on as expected for each particular request.
+  *
+  * Some usage examples:
+  *
+  * @code
+  * int ret;
+  * ret = opus_encoder_ctl(enc_ctx, OPUS_SET_BANDWIDTH(OPUS_AUTO));
+  * if (ret != OPUS_OK) return ret;
+  *
+  * opus_int32 rate;
+  * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&rate));
+  *
+  * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE);
+  * @endcode
+  *
+  * @see opus_genericctls, opus_encoder
+  * @{
+  */
+
+/** Configures the encoder's computational complexity.
+  * The supported range is 0-10 inclusive with 10 representing the highest complexity.
+  * @see OPUS_GET_COMPLEXITY
+  * @param[in] x <tt>opus_int32</tt>: Allowed values: 0-10, inclusive.
+  *
+  * @hideinitializer */
+#define OPUS_SET_COMPLEXITY(x) OPUS_SET_COMPLEXITY_REQUEST, __opus_check_int(x)
+/** Gets the encoder's complexity configuration.
+  * @see OPUS_SET_COMPLEXITY
+  * @param[out] x <tt>opus_int32 *</tt>: Returns a value in the range 0-10,
+  *                                      inclusive.
+  * @hideinitializer */
+#define OPUS_GET_COMPLEXITY(x) OPUS_GET_COMPLEXITY_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures the bitrate in the encoder.
+  * Rates from 500 to 512000 bits per second are meaningful, as well as the
+  * special values #OPUS_AUTO and #OPUS_BITRATE_MAX.
+  * The value #OPUS_BITRATE_MAX can be used to cause the codec to use as much
+  * rate as it can, which is useful for controlling the rate by adjusting the
+  * output buffer size.
+  * @see OPUS_GET_BITRATE
+  * @param[in] x <tt>opus_int32</tt>: Bitrate in bits per second. The default
+  *                                   is determined based on the number of
+  *                                   channels and the input sampling rate.
+  * @hideinitializer */
+#define OPUS_SET_BITRATE(x) OPUS_SET_BITRATE_REQUEST, __opus_check_int(x)
+/** Gets the encoder's bitrate configuration.
+  * @see OPUS_SET_BITRATE
+  * @param[out] x <tt>opus_int32 *</tt>: Returns the bitrate in bits per second.
+  *                                      The default is determined based on the
+  *                                      number of channels and the input
+  *                                      sampling rate.
+  * @hideinitializer */
+#define OPUS_GET_BITRATE(x) OPUS_GET_BITRATE_REQUEST, __opus_check_int_ptr(x)
+
+/** Enables or disables variable bitrate (VBR) in the encoder.
+  * The configured bitrate may not be met exactly because frames must
+  * be an integer number of bytes in length.
+  * @see OPUS_GET_VBR
+  * @see OPUS_SET_VBR_CONSTRAINT
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>0</dt><dd>Hard CBR. For LPC/hybrid modes at very low bit-rate, this can
+  *               cause noticeable quality degradation.</dd>
+  * <dt>1</dt><dd>VBR (default). The exact type of VBR is controlled by
+  *               #OPUS_SET_VBR_CONSTRAINT.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_VBR(x) OPUS_SET_VBR_REQUEST, __opus_check_int(x)
+/** Determine if variable bitrate (VBR) is enabled in the encoder.
+  * @see OPUS_SET_VBR
+  * @see OPUS_GET_VBR_CONSTRAINT
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>0</dt><dd>Hard CBR.</dd>
+  * <dt>1</dt><dd>VBR (default). The exact type of VBR may be retrieved via
+  *               #OPUS_GET_VBR_CONSTRAINT.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_VBR(x) OPUS_GET_VBR_REQUEST, __opus_check_int_ptr(x)
+
+/** Enables or disables constrained VBR in the encoder.
+  * This setting is ignored when the encoder is in CBR mode.
+  * @warning Only the MDCT mode of Opus currently heeds the constraint.
+  *  Speech mode ignores it completely, hybrid mode may fail to obey it
+  *  if the LPC layer uses more bitrate than the constraint would have
+  *  permitted.
+  * @see OPUS_GET_VBR_CONSTRAINT
+  * @see OPUS_SET_VBR
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>0</dt><dd>Unconstrained VBR.</dd>
+  * <dt>1</dt><dd>Constrained VBR (default). This creates a maximum of one
+  *               frame of buffering delay assuming a transport with a
+  *               serialization speed of the nominal bitrate.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_VBR_CONSTRAINT(x) OPUS_SET_VBR_CONSTRAINT_REQUEST, __opus_check_int(x)
+/** Determine if constrained VBR is enabled in the encoder.
+  * @see OPUS_SET_VBR_CONSTRAINT
+  * @see OPUS_GET_VBR
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>0</dt><dd>Unconstrained VBR.</dd>
+  * <dt>1</dt><dd>Constrained VBR (default).</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_VBR_CONSTRAINT(x) OPUS_GET_VBR_CONSTRAINT_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures mono/stereo forcing in the encoder.
+  * This can force the encoder to produce packets encoded as either mono or
+  * stereo, regardless of the format of the input audio. This is useful when
+  * the caller knows that the input signal is currently a mono source embedded
+  * in a stereo stream.
+  * @see OPUS_GET_FORCE_CHANNELS
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd>
+  * <dt>1</dt>         <dd>Forced mono</dd>
+  * <dt>2</dt>         <dd>Forced stereo</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_FORCE_CHANNELS(x) OPUS_SET_FORCE_CHANNELS_REQUEST, __opus_check_int(x)
+/** Gets the encoder's forced channel configuration.
+  * @see OPUS_SET_FORCE_CHANNELS
+  * @param[out] x <tt>opus_int32 *</tt>:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt><dd>Not forced (default)</dd>
+  * <dt>1</dt>         <dd>Forced mono</dd>
+  * <dt>2</dt>         <dd>Forced stereo</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_FORCE_CHANNELS(x) OPUS_GET_FORCE_CHANNELS_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures the maximum bandpass that the encoder will select automatically.
+  * Applications should normally use this instead of #OPUS_SET_BANDWIDTH
+  * (leaving that set to the default, #OPUS_AUTO). This allows the
+  * application to set an upper bound based on the type of input it is
+  * providing, but still gives the encoder the freedom to reduce the bandpass
+  * when the bitrate becomes too low, for better overall quality.
+  * @see OPUS_GET_MAX_BANDWIDTH
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>OPUS_BANDWIDTH_NARROWBAND</dt>    <dd>4 kHz passband</dd>
+  * <dt>OPUS_BANDWIDTH_MEDIUMBAND</dt>    <dd>6 kHz passband</dd>
+  * <dt>OPUS_BANDWIDTH_WIDEBAND</dt>      <dd>8 kHz passband</dd>
+  * <dt>OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
+  * <dt>OPUS_BANDWIDTH_FULLBAND</dt>     <dd>20 kHz passband (default)</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_MAX_BANDWIDTH(x) OPUS_SET_MAX_BANDWIDTH_REQUEST, __opus_check_int(x)
+
+/** Gets the encoder's configured maximum allowed bandpass.
+  * @see OPUS_SET_MAX_BANDWIDTH
+  * @param[out] x <tt>opus_int32 *</tt>: Allowed values:
+  * <dl>
+  * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt>    <dd>4 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt>    <dd>6 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt>      <dd>8 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_FULLBAND</dt>     <dd>20 kHz passband (default)</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_MAX_BANDWIDTH(x) OPUS_GET_MAX_BANDWIDTH_REQUEST, __opus_check_int_ptr(x)
+
+/** Sets the encoder's bandpass to a specific value.
+  * This prevents the encoder from automatically selecting the bandpass based
+  * on the available bitrate. If an application knows the bandpass of the input
+  * audio it is providing, it should normally use #OPUS_SET_MAX_BANDWIDTH
+  * instead, which still gives the encoder the freedom to reduce the bandpass
+  * when the bitrate becomes too low, for better overall quality.
+  * @see OPUS_GET_BANDWIDTH
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt>                    <dd>(default)</dd>
+  * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt>    <dd>4 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt>    <dd>6 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt>      <dd>8 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_FULLBAND</dt>     <dd>20 kHz passband</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_BANDWIDTH(x) OPUS_SET_BANDWIDTH_REQUEST, __opus_check_int(x)
+
+/** Configures the type of signal being encoded.
+  * This is a hint which helps the encoder's mode selection.
+  * @see OPUS_GET_SIGNAL
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt>        <dd>(default)</dd>
+  * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd>
+  * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_SIGNAL(x) OPUS_SET_SIGNAL_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured signal type.
+  * @see OPUS_SET_SIGNAL
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt>        <dd>(default)</dd>
+  * <dt>#OPUS_SIGNAL_VOICE</dt><dd>Bias thresholds towards choosing LPC or Hybrid modes.</dd>
+  * <dt>#OPUS_SIGNAL_MUSIC</dt><dd>Bias thresholds towards choosing MDCT modes.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_SIGNAL(x) OPUS_GET_SIGNAL_REQUEST, __opus_check_int_ptr(x)
+
+
+/** Configures the encoder's intended application.
+  * The initial value is a mandatory argument to the encoder_create function.
+  * @see OPUS_GET_APPLICATION
+  * @param[in] x <tt>opus_int32</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>#OPUS_APPLICATION_VOIP</dt>
+  * <dd>Process signal for improved speech intelligibility.</dd>
+  * <dt>#OPUS_APPLICATION_AUDIO</dt>
+  * <dd>Favor faithfulness to the original input.</dd>
+  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
+  * <dd>Configure the minimum possible coding delay by disabling certain modes
+  * of operation.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_APPLICATION(x) OPUS_SET_APPLICATION_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured application.
+  * @see OPUS_SET_APPLICATION
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>#OPUS_APPLICATION_VOIP</dt>
+  * <dd>Process signal for improved speech intelligibility.</dd>
+  * <dt>#OPUS_APPLICATION_AUDIO</dt>
+  * <dd>Favor faithfulness to the original input.</dd>
+  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
+  * <dd>Configure the minimum possible coding delay by disabling certain modes
+  * of operation.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_APPLICATION(x) OPUS_GET_APPLICATION_REQUEST, __opus_check_int_ptr(x)
+
+/** Gets the total samples of delay added by the entire codec.
+  * This can be queried by the encoder and then the provided number of samples can be
+  * skipped on from the start of the decoder's output to provide time aligned input
+  * and output. From the perspective of a decoding application the real data begins this many
+  * samples late.
+  *
+  * The decoder contribution to this delay is identical for all decoders, but the
+  * encoder portion of the delay may vary from implementation to implementation,
+  * version to version, or even depend on the encoder's initial configuration.
+  * Applications needing delay compensation should call this CTL rather than
+  * hard-coding a value.
+  * @param[out] x <tt>opus_int32 *</tt>:   Number of lookahead samples
+  * @hideinitializer */
+#define OPUS_GET_LOOKAHEAD(x) OPUS_GET_LOOKAHEAD_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures the encoder's use of inband forward error correction (FEC).
+  * @note This is only applicable to the LPC layer
+  * @see OPUS_GET_INBAND_FEC
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>0</dt><dd>Disable inband FEC (default).</dd>
+  * <dt>1</dt><dd>Enable inband FEC.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_INBAND_FEC(x) OPUS_SET_INBAND_FEC_REQUEST, __opus_check_int(x)
+/** Gets encoder's configured use of inband forward error correction.
+  * @see OPUS_SET_INBAND_FEC
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>0</dt><dd>Inband FEC disabled (default).</dd>
+  * <dt>1</dt><dd>Inband FEC enabled.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_INBAND_FEC(x) OPUS_GET_INBAND_FEC_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures the encoder's expected packet loss percentage.
+  * Higher values trigger progressively more loss resistant behavior in the encoder
+  * at the expense of quality at a given bitrate in the absence of packet loss, but
+  * greater quality under loss.
+  * @see OPUS_GET_PACKET_LOSS_PERC
+  * @param[in] x <tt>opus_int32</tt>:   Loss percentage in the range 0-100, inclusive (default: 0).
+  * @hideinitializer */
+#define OPUS_SET_PACKET_LOSS_PERC(x) OPUS_SET_PACKET_LOSS_PERC_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured packet loss percentage.
+  * @see OPUS_SET_PACKET_LOSS_PERC
+  * @param[out] x <tt>opus_int32 *</tt>: Returns the configured loss percentage
+  *                                      in the range 0-100, inclusive (default: 0).
+  * @hideinitializer */
+#define OPUS_GET_PACKET_LOSS_PERC(x) OPUS_GET_PACKET_LOSS_PERC_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures the encoder's use of discontinuous transmission (DTX).
+  * @note This is only applicable to the LPC layer
+  * @see OPUS_GET_DTX
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>0</dt><dd>Disable DTX (default).</dd>
+  * <dt>1</dt><dd>Enabled DTX.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_DTX(x) OPUS_SET_DTX_REQUEST, __opus_check_int(x)
+/** Gets encoder's configured use of discontinuous transmission.
+  * @see OPUS_SET_DTX
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>0</dt><dd>DTX disabled (default).</dd>
+  * <dt>1</dt><dd>DTX enabled.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_DTX(x) OPUS_GET_DTX_REQUEST, __opus_check_int_ptr(x)
+/** Configures the depth of signal being encoded.
+  *
+  * This is a hint which helps the encoder identify silence and near-silence.
+  * It represents the number of significant bits of linear intensity below
+  * which the signal contains ignorable quantization or other noise.
+  *
+  * For example, OPUS_SET_LSB_DEPTH(14) would be an appropriate setting
+  * for G.711 u-law input. OPUS_SET_LSB_DEPTH(16) would be appropriate
+  * for 16-bit linear pcm input with opus_encode_float().
+  *
+  * When using opus_encode() instead of opus_encode_float(), or when libopus
+  * is compiled for fixed-point, the encoder uses the minimum of the value
+  * set here and the value 16.
+  *
+  * @see OPUS_GET_LSB_DEPTH
+  * @param[in] x <tt>opus_int32</tt>: Input precision in bits, between 8 and 24
+  *                                   (default: 24).
+  * @hideinitializer */
+#define OPUS_SET_LSB_DEPTH(x) OPUS_SET_LSB_DEPTH_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured signal depth.
+  * @see OPUS_SET_LSB_DEPTH
+  * @param[out] x <tt>opus_int32 *</tt>: Input precision in bits, between 8 and
+  *                                      24 (default: 24).
+  * @hideinitializer */
+#define OPUS_GET_LSB_DEPTH(x) OPUS_GET_LSB_DEPTH_REQUEST, __opus_check_int_ptr(x)
+
+/** Configures the encoder's use of variable duration frames.
+  * When variable duration is enabled, the encoder is free to use a shorter frame
+  * size than the one requested in the opus_encode*() call.
+  * It is then the user's responsibility
+  * to verify how much audio was encoded by checking the ToC byte of the encoded
+  * packet. The part of the audio that was not encoded needs to be resent to the
+  * encoder for the next call. Do not use this option unless you <b>really</b>
+  * know what you are doing.
+  * @see OPUS_GET_EXPERT_FRAME_DURATION
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>OPUS_FRAMESIZE_ARG</dt><dd>Select frame size from the argument (default).</dd>
+  * <dt>OPUS_FRAMESIZE_2_5_MS</dt><dd>Use 2.5 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_5_MS</dt><dd>Use 5 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_10_MS</dt><dd>Use 10 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_20_MS</dt><dd>Use 20 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_40_MS</dt><dd>Use 40 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_60_MS</dt><dd>Use 60 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_80_MS</dt><dd>Use 80 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_100_MS</dt><dd>Use 100 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_120_MS</dt><dd>Use 120 ms frames.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_EXPERT_FRAME_DURATION(x) OPUS_SET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured use of variable duration frames.
+  * @see OPUS_SET_EXPERT_FRAME_DURATION
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>OPUS_FRAMESIZE_ARG</dt><dd>Select frame size from the argument (default).</dd>
+  * <dt>OPUS_FRAMESIZE_2_5_MS</dt><dd>Use 2.5 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_5_MS</dt><dd>Use 5 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_10_MS</dt><dd>Use 10 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_20_MS</dt><dd>Use 20 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_40_MS</dt><dd>Use 40 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_60_MS</dt><dd>Use 60 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_80_MS</dt><dd>Use 80 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_100_MS</dt><dd>Use 100 ms frames.</dd>
+  * <dt>OPUS_FRAMESIZE_120_MS</dt><dd>Use 120 ms frames.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_EXPERT_FRAME_DURATION(x) OPUS_GET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int_ptr(x)
+
+/** If set to 1, disables almost all use of prediction, making frames almost
+  * completely independent. This reduces quality.
+  * @see OPUS_GET_PREDICTION_DISABLED
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>0</dt><dd>Enable prediction (default).</dd>
+  * <dt>1</dt><dd>Disable prediction.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_PREDICTION_DISABLED(x) OPUS_SET_PREDICTION_DISABLED_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured prediction status.
+  * @see OPUS_SET_PREDICTION_DISABLED
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>0</dt><dd>Prediction enabled (default).</dd>
+  * <dt>1</dt><dd>Prediction disabled.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_PREDICTION_DISABLED(x) OPUS_GET_PREDICTION_DISABLED_REQUEST, __opus_check_int_ptr(x)
+
+/**@}*/
+
+/** @defgroup opus_genericctls Generic CTLs
+  *
+  * These macros are used with the \c opus_decoder_ctl and
+  * \c opus_encoder_ctl calls to generate a particular
+  * request.
+  *
+  * When called on an \c OpusDecoder they apply to that
+  * particular decoder instance. When called on an
+  * \c OpusEncoder they apply to the corresponding setting
+  * on that encoder instance, if present.
+  *
+  * Some usage examples:
+  *
+  * @code
+  * int ret;
+  * opus_int32 pitch;
+  * ret = opus_decoder_ctl(dec_ctx, OPUS_GET_PITCH(&pitch));
+  * if (ret == OPUS_OK) return ret;
+  *
+  * opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE);
+  * opus_decoder_ctl(dec_ctx, OPUS_RESET_STATE);
+  *
+  * opus_int32 enc_bw, dec_bw;
+  * opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&enc_bw));
+  * opus_decoder_ctl(dec_ctx, OPUS_GET_BANDWIDTH(&dec_bw));
+  * if (enc_bw != dec_bw) {
+  *   printf("packet bandwidth mismatch!\n");
+  * }
+  * @endcode
+  *
+  * @see opus_encoder, opus_decoder_ctl, opus_encoder_ctl, opus_decoderctls, opus_encoderctls
+  * @{
+  */
+
+/** Resets the codec state to be equivalent to a freshly initialized state.
+  * This should be called when switching streams in order to prevent
+  * the back to back decoding from giving different results from
+  * one at a time decoding.
+  * @hideinitializer */
+#define OPUS_RESET_STATE 4028
+
+/** Gets the final state of the codec's entropy coder.
+  * This is used for testing purposes,
+  * The encoder and decoder state should be identical after coding a payload
+  * (assuming no data corruption or software bugs)
+  *
+  * @param[out] x <tt>opus_uint32 *</tt>: Entropy coder state
+  *
+  * @hideinitializer */
+#define OPUS_GET_FINAL_RANGE(x) OPUS_GET_FINAL_RANGE_REQUEST, __opus_check_uint_ptr(x)
+
+/** Gets the encoder's configured bandpass or the decoder's last bandpass.
+  * @see OPUS_SET_BANDWIDTH
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>#OPUS_AUTO</dt>                    <dd>(default)</dd>
+  * <dt>#OPUS_BANDWIDTH_NARROWBAND</dt>    <dd>4 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_MEDIUMBAND</dt>    <dd>6 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_WIDEBAND</dt>      <dd>8 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_SUPERWIDEBAND</dt><dd>12 kHz passband</dd>
+  * <dt>#OPUS_BANDWIDTH_FULLBAND</dt>     <dd>20 kHz passband</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_BANDWIDTH(x) OPUS_GET_BANDWIDTH_REQUEST, __opus_check_int_ptr(x)
+
+/** Gets the sampling rate the encoder or decoder was initialized with.
+  * This simply returns the <code>Fs</code> value passed to opus_encoder_init()
+  * or opus_decoder_init().
+  * @param[out] x <tt>opus_int32 *</tt>: Sampling rate of encoder or decoder.
+  * @hideinitializer
+  */
+#define OPUS_GET_SAMPLE_RATE(x) OPUS_GET_SAMPLE_RATE_REQUEST, __opus_check_int_ptr(x)
+
+/** If set to 1, disables the use of phase inversion for intensity stereo,
+  * improving the quality of mono downmixes, but slightly reducing normal
+  * stereo quality. Disabling phase inversion in the decoder does not comply
+  * with RFC 6716, although it does not cause any interoperability issue and
+  * is expected to become part of the Opus standard once RFC 6716 is updated
+  * by draft-ietf-codec-opus-update.
+  * @see OPUS_GET_PHASE_INVERSION_DISABLED
+  * @param[in] x <tt>opus_int32</tt>: Allowed values:
+  * <dl>
+  * <dt>0</dt><dd>Enable phase inversion (default).</dd>
+  * <dt>1</dt><dd>Disable phase inversion.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_SET_PHASE_INVERSION_DISABLED(x) OPUS_SET_PHASE_INVERSION_DISABLED_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured phase inversion status.
+  * @see OPUS_SET_PHASE_INVERSION_DISABLED
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>0</dt><dd>Stereo phase inversion enabled (default).</dd>
+  * <dt>1</dt><dd>Stereo phase inversion disabled.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_PHASE_INVERSION_DISABLED(x) OPUS_GET_PHASE_INVERSION_DISABLED_REQUEST, __opus_check_int_ptr(x)
+/** Gets the DTX state of the encoder.
+  * Returns whether the last encoded frame was either a comfort noise update
+  * during DTX or not encoded because of DTX.
+  * @param[out] x <tt>opus_int32 *</tt>: Returns one of the following values:
+  * <dl>
+  * <dt>0</dt><dd>The encoder is not in DTX.</dd>
+  * <dt>1</dt><dd>The encoder is in DTX.</dd>
+  * </dl>
+  * @hideinitializer */
+#define OPUS_GET_IN_DTX(x) OPUS_GET_IN_DTX_REQUEST, __opus_check_int_ptr(x)
+
+/**@}*/
+
+/** @defgroup opus_decoderctls Decoder related CTLs
+  * @see opus_genericctls, opus_encoderctls, opus_decoder
+  * @{
+  */
+
+/** Configures decoder gain adjustment.
+  * Scales the decoded output by a factor specified in Q8 dB units.
+  * This has a maximum range of -32768 to 32767 inclusive, and returns
+  * OPUS_BAD_ARG otherwise. The default is zero indicating no adjustment.
+  * This setting survives decoder reset.
+  *
+  * gain = pow(10, x/(20.0*256))
+  *
+  * @param[in] x <tt>opus_int32</tt>:   Amount to scale PCM signal by in Q8 dB units.
+  * @hideinitializer */
+#define OPUS_SET_GAIN(x) OPUS_SET_GAIN_REQUEST, __opus_check_int(x)
+/** Gets the decoder's configured gain adjustment. @see OPUS_SET_GAIN
+  *
+  * @param[out] x <tt>opus_int32 *</tt>: Amount to scale PCM signal by in Q8 dB units.
+  * @hideinitializer */
+#define OPUS_GET_GAIN(x) OPUS_GET_GAIN_REQUEST, __opus_check_int_ptr(x)
+
+/** Gets the duration (in samples) of the last packet successfully decoded or concealed.
+  * @param[out] x <tt>opus_int32 *</tt>: Number of samples (at current sampling rate).
+  * @hideinitializer */
+#define OPUS_GET_LAST_PACKET_DURATION(x) OPUS_GET_LAST_PACKET_DURATION_REQUEST, __opus_check_int_ptr(x)
+
+/** Gets the pitch of the last decoded frame, if available.
+  * This can be used for any post-processing algorithm requiring the use of pitch,
+  * e.g. time stretching/shortening. If the last frame was not voiced, or if the
+  * pitch was not coded in the frame, then zero is returned.
+  *
+  * This CTL is only implemented for decoder instances.
+  *
+  * @param[out] x <tt>opus_int32 *</tt>: pitch period at 48 kHz (or 0 if not available)
+  *
+  * @hideinitializer */
+#define OPUS_GET_PITCH(x) OPUS_GET_PITCH_REQUEST, __opus_check_int_ptr(x)
+
+/**@}*/
+
+/** @defgroup opus_libinfo Opus library information functions
+  * @{
+  */
+
+/** Converts an opus error code into a human readable string.
+  *
+  * @param[in] error <tt>int</tt>: Error number
+  * @returns Error string
+  */
+OPUS_EXPORT const char *opus_strerror(int error);
+
+/** Gets the libopus version string.
+  *
+  * Applications may look for the substring "-fixed" in the version string to
+  * determine whether they have a fixed-point or floating-point build at
+  * runtime.
+  *
+  * @returns Version string
+  */
+OPUS_EXPORT const char *opus_get_version_string(void);
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OPUS_DEFINES_H */

pkg/codec/opus/include/opus_multistream.h

@@ -0,0 +1,660 @@
+/* Copyright (c) 2011 Xiph.Org Foundation
+   Written by Jean-Marc Valin */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/**
+ * @file opus_multistream.h
+ * @brief Opus reference implementation multistream API
+ */
+
+#ifndef OPUS_MULTISTREAM_H
+#define OPUS_MULTISTREAM_H
+
+#include "opus.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @cond OPUS_INTERNAL_DOC */
+
+/** Macros to trigger compilation errors when the wrong types are provided to a
+  * CTL. */
+/**@{*/
+#define __opus_check_encstate_ptr(ptr) ((ptr) + ((ptr) - (OpusEncoder**)(ptr)))
+#define __opus_check_decstate_ptr(ptr) ((ptr) + ((ptr) - (OpusDecoder**)(ptr)))
+/**@}*/
+
+/** These are the actual encoder and decoder CTL ID numbers.
+  * They should not be used directly by applications.
+  * In general, SETs should be even and GETs should be odd.*/
+/**@{*/
+#define OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST 5120
+#define OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST 5122
+/**@}*/
+
+/** @endcond */
+
+/** @defgroup opus_multistream_ctls Multistream specific encoder and decoder CTLs
+  *
+  * These are convenience macros that are specific to the
+  * opus_multistream_encoder_ctl() and opus_multistream_decoder_ctl()
+  * interface.
+  * The CTLs from @ref opus_genericctls, @ref opus_encoderctls, and
+  * @ref opus_decoderctls may be applied to a multistream encoder or decoder as
+  * well.
+  * In addition, you may retrieve the encoder or decoder state for an specific
+  * stream via #OPUS_MULTISTREAM_GET_ENCODER_STATE or
+  * #OPUS_MULTISTREAM_GET_DECODER_STATE and apply CTLs to it individually.
+  */
+/**@{*/
+
+/** Gets the encoder state for an individual stream of a multistream encoder.
+  * @param[in] x <tt>opus_int32</tt>: The index of the stream whose encoder you
+  *                                   wish to retrieve.
+  *                                   This must be non-negative and less than
+  *                                   the <code>streams</code> parameter used
+  *                                   to initialize the encoder.
+  * @param[out] y <tt>OpusEncoder**</tt>: Returns a pointer to the given
+  *                                       encoder state.
+  * @retval OPUS_BAD_ARG The index of the requested stream was out of range.
+  * @hideinitializer
+  */
+#define OPUS_MULTISTREAM_GET_ENCODER_STATE(x,y) OPUS_MULTISTREAM_GET_ENCODER_STATE_REQUEST, __opus_check_int(x), __opus_check_encstate_ptr(y)
+
+/** Gets the decoder state for an individual stream of a multistream decoder.
+  * @param[in] x <tt>opus_int32</tt>: The index of the stream whose decoder you
+  *                                   wish to retrieve.
+  *                                   This must be non-negative and less than
+  *                                   the <code>streams</code> parameter used
+  *                                   to initialize the decoder.
+  * @param[out] y <tt>OpusDecoder**</tt>: Returns a pointer to the given
+  *                                       decoder state.
+  * @retval OPUS_BAD_ARG The index of the requested stream was out of range.
+  * @hideinitializer
+  */
+#define OPUS_MULTISTREAM_GET_DECODER_STATE(x,y) OPUS_MULTISTREAM_GET_DECODER_STATE_REQUEST, __opus_check_int(x), __opus_check_decstate_ptr(y)
+
+/**@}*/
+
+/** @defgroup opus_multistream Opus Multistream API
+  * @{
+  *
+  * The multistream API allows individual Opus streams to be combined into a
+  * single packet, enabling support for up to 255 channels. Unlike an
+  * elementary Opus stream, the encoder and decoder must negotiate the channel
+  * configuration before the decoder can successfully interpret the data in the
+  * packets produced by the encoder. Some basic information, such as packet
+  * duration, can be computed without any special negotiation.
+  *
+  * The format for multistream Opus packets is defined in
+  * <a href="https://tools.ietf.org/html/rfc7845">RFC 7845</a>
+  * and is based on the self-delimited Opus framing described in Appendix B of
+  * <a href="https://tools.ietf.org/html/rfc6716">RFC 6716</a>.
+  * Normal Opus packets are just a degenerate case of multistream Opus packets,
+  * and can be encoded or decoded with the multistream API by setting
+  * <code>streams</code> to <code>1</code> when initializing the encoder or
+  * decoder.
+  *
+  * Multistream Opus streams can contain up to 255 elementary Opus streams.
+  * These may be either "uncoupled" or "coupled", indicating that the decoder
+  * is configured to decode them to either 1 or 2 channels, respectively.
+  * The streams are ordered so that all coupled streams appear at the
+  * beginning.
+  *
+  * A <code>mapping</code> table defines which decoded channel <code>i</code>
+  * should be used for each input/output (I/O) channel <code>j</code>. This table is
+  * typically provided as an unsigned char array.
+  * Let <code>i = mapping[j]</code> be the index for I/O channel <code>j</code>.
+  * If <code>i < 2*coupled_streams</code>, then I/O channel <code>j</code> is
+  * encoded as the left channel of stream <code>(i/2)</code> if <code>i</code>
+  * is even, or  as the right channel of stream <code>(i/2)</code> if
+  * <code>i</code> is odd. Otherwise, I/O channel <code>j</code> is encoded as
+  * mono in stream <code>(i - coupled_streams)</code>, unless it has the special
+  * value 255, in which case it is omitted from the encoding entirely (the
+  * decoder will reproduce it as silence). Each value <code>i</code> must either
+  * be the special value 255 or be less than <code>streams + coupled_streams</code>.
+  *
+  * The output channels specified by the encoder
+  * should use the
+  * <a href="https://www.xiph.org/vorbis/doc/Vorbis_I_spec.html#x1-810004.3.9">Vorbis
+  * channel ordering</a>. A decoder may wish to apply an additional permutation
+  * to the mapping the encoder used to achieve a different output channel
+  * order (e.g. for outputing in WAV order).
+  *
+  * Each multistream packet contains an Opus packet for each stream, and all of
+  * the Opus packets in a single multistream packet must have the same
+  * duration. Therefore the duration of a multistream packet can be extracted
+  * from the TOC sequence of the first stream, which is located at the
+  * beginning of the packet, just like an elementary Opus stream:
+  *
+  * @code
+  * int nb_samples;
+  * int nb_frames;
+  * nb_frames = opus_packet_get_nb_frames(data, len);
+  * if (nb_frames < 1)
+  *   return nb_frames;
+  * nb_samples = opus_packet_get_samples_per_frame(data, 48000) * nb_frames;
+  * @endcode
+  *
+  * The general encoding and decoding process proceeds exactly the same as in
+  * the normal @ref opus_encoder and @ref opus_decoder APIs.
+  * See their documentation for an overview of how to use the corresponding
+  * multistream functions.
+  */
+
+/** Opus multistream encoder state.
+  * This contains the complete state of a multistream Opus encoder.
+  * It is position independent and can be freely copied.
+  * @see opus_multistream_encoder_create
+  * @see opus_multistream_encoder_init
+  */
+typedef struct OpusMSEncoder OpusMSEncoder;
+
+/** Opus multistream decoder state.
+  * This contains the complete state of a multistream Opus decoder.
+  * It is position independent and can be freely copied.
+  * @see opus_multistream_decoder_create
+  * @see opus_multistream_decoder_init
+  */
+typedef struct OpusMSDecoder OpusMSDecoder;
+
+/**\name Multistream encoder functions */
+/**@{*/
+
+/** Gets the size of an OpusMSEncoder structure.
+  * @param streams <tt>int</tt>: The total number of streams to encode from the
+  *                              input.
+  *                              This must be no more than 255.
+  * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
+  *                                      to encode.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      encoded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than 255.
+  * @returns The size in bytes on success, or a negative error code
+  *          (see @ref opus_errorcodes) on error.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_encoder_get_size(
+      int streams,
+      int coupled_streams
+);
+
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_surround_encoder_get_size(
+      int channels,
+      int mapping_family
+);
+
+
+/** Allocates and initializes a multistream encoder state.
+  * Call opus_multistream_encoder_destroy() to release
+  * this object when finished.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels in the input signal.
+  *                               This must be at most 255.
+  *                               It may be greater than the number of
+  *                               coded channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param streams <tt>int</tt>: The total number of streams to encode from the
+  *                              input.
+  *                              This must be no more than the number of channels.
+  * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
+  *                                      to encode.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      encoded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than the number of input channels.
+  * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
+  *                    encoded channels to input channels, as described in
+  *                    @ref opus_multistream. As an extra constraint, the
+  *                    multistream encoder does not allow encoding coupled
+  *                    streams for which one channel is unused since this
+  *                    is never a good idea.
+  * @param application <tt>int</tt>: The target encoder application.
+  *                                  This must be one of the following:
+  * <dl>
+  * <dt>#OPUS_APPLICATION_VOIP</dt>
+  * <dd>Process signal for improved speech intelligibility.</dd>
+  * <dt>#OPUS_APPLICATION_AUDIO</dt>
+  * <dd>Favor faithfulness to the original input.</dd>
+  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
+  * <dd>Configure the minimum possible coding delay by disabling certain modes
+  * of operation.</dd>
+  * </dl>
+  * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
+  *                                   code (see @ref opus_errorcodes) on
+  *                                   failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_encoder_create(
+      opus_int32 Fs,
+      int channels,
+      int streams,
+      int coupled_streams,
+      const unsigned char *mapping,
+      int application,
+      int *error
+) OPUS_ARG_NONNULL(5);
+
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSEncoder *opus_multistream_surround_encoder_create(
+      opus_int32 Fs,
+      int channels,
+      int mapping_family,
+      int *streams,
+      int *coupled_streams,
+      unsigned char *mapping,
+      int application,
+      int *error
+) OPUS_ARG_NONNULL(4) OPUS_ARG_NONNULL(5) OPUS_ARG_NONNULL(6);
+
+/** Initialize a previously allocated multistream encoder state.
+  * The memory pointed to by \a st must be at least the size returned by
+  * opus_multistream_encoder_get_size().
+  * This is intended for applications which use their own allocator instead of
+  * malloc.
+  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
+  * @see opus_multistream_encoder_create
+  * @see opus_multistream_encoder_get_size
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels in the input signal.
+  *                               This must be at most 255.
+  *                               It may be greater than the number of
+  *                               coded channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param streams <tt>int</tt>: The total number of streams to encode from the
+  *                              input.
+  *                              This must be no more than the number of channels.
+  * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
+  *                                      to encode.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      encoded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than the number of input channels.
+  * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
+  *                    encoded channels to input channels, as described in
+  *                    @ref opus_multistream. As an extra constraint, the
+  *                    multistream encoder does not allow encoding coupled
+  *                    streams for which one channel is unused since this
+  *                    is never a good idea.
+  * @param application <tt>int</tt>: The target encoder application.
+  *                                  This must be one of the following:
+  * <dl>
+  * <dt>#OPUS_APPLICATION_VOIP</dt>
+  * <dd>Process signal for improved speech intelligibility.</dd>
+  * <dt>#OPUS_APPLICATION_AUDIO</dt>
+  * <dd>Favor faithfulness to the original input.</dd>
+  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
+  * <dd>Configure the minimum possible coding delay by disabling certain modes
+  * of operation.</dd>
+  * </dl>
+  * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
+  *          on failure.
+  */
+OPUS_EXPORT int opus_multistream_encoder_init(
+      OpusMSEncoder *st,
+      opus_int32 Fs,
+      int channels,
+      int streams,
+      int coupled_streams,
+      const unsigned char *mapping,
+      int application
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
+
+OPUS_EXPORT int opus_multistream_surround_encoder_init(
+      OpusMSEncoder *st,
+      opus_int32 Fs,
+      int channels,
+      int mapping_family,
+      int *streams,
+      int *coupled_streams,
+      unsigned char *mapping,
+      int application
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(5) OPUS_ARG_NONNULL(6) OPUS_ARG_NONNULL(7);
+
+/** Encodes a multistream Opus frame.
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
+  * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved
+  *                                            samples.
+  *                                            This must contain
+  *                                            <code>frame_size*channels</code>
+  *                                            samples.
+  * @param frame_size <tt>int</tt>: Number of samples per channel in the input
+  *                                 signal.
+  *                                 This must be an Opus frame size for the
+  *                                 encoder's sampling rate.
+  *                                 For example, at 48 kHz the permitted values
+  *                                 are 120, 240, 480, 960, 1920, and 2880.
+  *                                 Passing in a duration of less than 10 ms
+  *                                 (480 samples at 48 kHz) will prevent the
+  *                                 encoder from using the LPC or hybrid modes.
+  * @param[out] data <tt>unsigned char*</tt>: Output payload.
+  *                                           This must contain storage for at
+  *                                           least \a max_data_bytes.
+  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
+  *                                                 memory for the output
+  *                                                 payload. This may be
+  *                                                 used to impose an upper limit on
+  *                                                 the instant bitrate, but should
+  *                                                 not be used as the only bitrate
+  *                                                 control. Use #OPUS_SET_BITRATE to
+  *                                                 control the bitrate.
+  * @returns The length of the encoded packet (in bytes) on success or a
+  *          negative error code (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode(
+    OpusMSEncoder *st,
+    const opus_int16 *pcm,
+    int frame_size,
+    unsigned char *data,
+    opus_int32 max_data_bytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Encodes a multistream Opus frame from floating point input.
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
+  * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved
+  *                                       samples with a normal range of
+  *                                       +/-1.0.
+  *                                       Samples with a range beyond +/-1.0
+  *                                       are supported but will be clipped by
+  *                                       decoders using the integer API and
+  *                                       should only be used if it is known
+  *                                       that the far end supports extended
+  *                                       dynamic range.
+  *                                       This must contain
+  *                                       <code>frame_size*channels</code>
+  *                                       samples.
+  * @param frame_size <tt>int</tt>: Number of samples per channel in the input
+  *                                 signal.
+  *                                 This must be an Opus frame size for the
+  *                                 encoder's sampling rate.
+  *                                 For example, at 48 kHz the permitted values
+  *                                 are 120, 240, 480, 960, 1920, and 2880.
+  *                                 Passing in a duration of less than 10 ms
+  *                                 (480 samples at 48 kHz) will prevent the
+  *                                 encoder from using the LPC or hybrid modes.
+  * @param[out] data <tt>unsigned char*</tt>: Output payload.
+  *                                           This must contain storage for at
+  *                                           least \a max_data_bytes.
+  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
+  *                                                 memory for the output
+  *                                                 payload. This may be
+  *                                                 used to impose an upper limit on
+  *                                                 the instant bitrate, but should
+  *                                                 not be used as the only bitrate
+  *                                                 control. Use #OPUS_SET_BITRATE to
+  *                                                 control the bitrate.
+  * @returns The length of the encoded packet (in bytes) on success or a
+  *          negative error code (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_encode_float(
+      OpusMSEncoder *st,
+      const float *pcm,
+      int frame_size,
+      unsigned char *data,
+      opus_int32 max_data_bytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Frees an <code>OpusMSEncoder</code> allocated by
+  * opus_multistream_encoder_create().
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to be freed.
+  */
+OPUS_EXPORT void opus_multistream_encoder_destroy(OpusMSEncoder *st);
+
+/** Perform a CTL function on a multistream Opus encoder.
+  *
+  * Generally the request and subsequent arguments are generated by a
+  * convenience macro.
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state.
+  * @param request This and all remaining parameters should be replaced by one
+  *                of the convenience macros in @ref opus_genericctls,
+  *                @ref opus_encoderctls, or @ref opus_multistream_ctls.
+  * @see opus_genericctls
+  * @see opus_encoderctls
+  * @see opus_multistream_ctls
+  */
+OPUS_EXPORT int opus_multistream_encoder_ctl(OpusMSEncoder *st, int request, ...) OPUS_ARG_NONNULL(1);
+
+/**@}*/
+
+/**\name Multistream decoder functions */
+/**@{*/
+
+/** Gets the size of an <code>OpusMSDecoder</code> structure.
+  * @param streams <tt>int</tt>: The total number of streams coded in the
+  *                              input.
+  *                              This must be no more than 255.
+  * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled
+  *                                      (2 channel) streams.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      coded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than 255.
+  * @returns The size in bytes on success, or a negative error code
+  *          (see @ref opus_errorcodes) on error.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_decoder_get_size(
+      int streams,
+      int coupled_streams
+);
+
+/** Allocates and initializes a multistream decoder state.
+  * Call opus_multistream_decoder_destroy() to release
+  * this object when finished.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels to output.
+  *                               This must be at most 255.
+  *                               It may be different from the number of coded
+  *                               channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param streams <tt>int</tt>: The total number of streams coded in the
+  *                              input.
+  *                              This must be no more than 255.
+  * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
+  *                                      (2 channel) streams.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      coded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than 255.
+  * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
+  *                    coded channels to output channels, as described in
+  *                    @ref opus_multistream.
+  * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
+  *                                   code (see @ref opus_errorcodes) on
+  *                                   failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusMSDecoder *opus_multistream_decoder_create(
+      opus_int32 Fs,
+      int channels,
+      int streams,
+      int coupled_streams,
+      const unsigned char *mapping,
+      int *error
+) OPUS_ARG_NONNULL(5);
+
+/** Intialize a previously allocated decoder state object.
+  * The memory pointed to by \a st must be at least the size returned by
+  * opus_multistream_encoder_get_size().
+  * This is intended for applications which use their own allocator instead of
+  * malloc.
+  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
+  * @see opus_multistream_decoder_create
+  * @see opus_multistream_deocder_get_size
+  * @param st <tt>OpusMSEncoder*</tt>: Multistream encoder state to initialize.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels to output.
+  *                               This must be at most 255.
+  *                               It may be different from the number of coded
+  *                               channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param streams <tt>int</tt>: The total number of streams coded in the
+  *                              input.
+  *                              This must be no more than 255.
+  * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
+  *                                      (2 channel) streams.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      coded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than 255.
+  * @param[in] mapping <code>const unsigned char[channels]</code>: Mapping from
+  *                    coded channels to output channels, as described in
+  *                    @ref opus_multistream.
+  * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
+  *          on failure.
+  */
+OPUS_EXPORT int opus_multistream_decoder_init(
+      OpusMSDecoder *st,
+      opus_int32 Fs,
+      int channels,
+      int streams,
+      int coupled_streams,
+      const unsigned char *mapping
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
+
+/** Decode a multistream Opus packet.
+  * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
+  * @param[in] data <tt>const unsigned char*</tt>: Input payload.
+  *                                                Use a <code>NULL</code>
+  *                                                pointer to indicate packet
+  *                                                loss.
+  * @param len <tt>opus_int32</tt>: Number of bytes in payload.
+  * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
+  *                                       samples.
+  *                                       This must contain room for
+  *                                       <code>frame_size*channels</code>
+  *                                       samples.
+  * @param frame_size <tt>int</tt>: The number of samples per channel of
+  *                                 available space in \a pcm.
+  *                                 If this is less than the maximum packet duration
+  *                                 (120 ms; 5760 for 48kHz), this function will not be capable
+  *                                 of decoding some packets. In the case of PLC (data==NULL)
+  *                                 or FEC (decode_fec=1), then frame_size needs to be exactly
+  *                                 the duration of audio that is missing, otherwise the
+  *                                 decoder will not be in the optimal state to decode the
+  *                                 next incoming packet. For the PLC and FEC cases, frame_size
+  *                                 <b>must</b> be a multiple of 2.5 ms.
+  * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
+  *                                 forward error correction data be decoded.
+  *                                 If no such data is available, the frame is
+  *                                 decoded as if it were lost.
+  * @returns Number of samples decoded on success or a negative error code
+  *          (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode(
+    OpusMSDecoder *st,
+    const unsigned char *data,
+    opus_int32 len,
+    opus_int16 *pcm,
+    int frame_size,
+    int decode_fec
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Decode a multistream Opus packet with floating point output.
+  * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
+  * @param[in] data <tt>const unsigned char*</tt>: Input payload.
+  *                                                Use a <code>NULL</code>
+  *                                                pointer to indicate packet
+  *                                                loss.
+  * @param len <tt>opus_int32</tt>: Number of bytes in payload.
+  * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
+  *                                       samples.
+  *                                       This must contain room for
+  *                                       <code>frame_size*channels</code>
+  *                                       samples.
+  * @param frame_size <tt>int</tt>: The number of samples per channel of
+  *                                 available space in \a pcm.
+  *                                 If this is less than the maximum packet duration
+  *                                 (120 ms; 5760 for 48kHz), this function will not be capable
+  *                                 of decoding some packets. In the case of PLC (data==NULL)
+  *                                 or FEC (decode_fec=1), then frame_size needs to be exactly
+  *                                 the duration of audio that is missing, otherwise the
+  *                                 decoder will not be in the optimal state to decode the
+  *                                 next incoming packet. For the PLC and FEC cases, frame_size
+  *                                 <b>must</b> be a multiple of 2.5 ms.
+  * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
+  *                                 forward error correction data be decoded.
+  *                                 If no such data is available, the frame is
+  *                                 decoded as if it were lost.
+  * @returns Number of samples decoded on success or a negative error code
+  *          (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_multistream_decode_float(
+    OpusMSDecoder *st,
+    const unsigned char *data,
+    opus_int32 len,
+    float *pcm,
+    int frame_size,
+    int decode_fec
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Perform a CTL function on a multistream Opus decoder.
+  *
+  * Generally the request and subsequent arguments are generated by a
+  * convenience macro.
+  * @param st <tt>OpusMSDecoder*</tt>: Multistream decoder state.
+  * @param request This and all remaining parameters should be replaced by one
+  *                of the convenience macros in @ref opus_genericctls,
+  *                @ref opus_decoderctls, or @ref opus_multistream_ctls.
+  * @see opus_genericctls
+  * @see opus_decoderctls
+  * @see opus_multistream_ctls
+  */
+OPUS_EXPORT int opus_multistream_decoder_ctl(OpusMSDecoder *st, int request, ...) OPUS_ARG_NONNULL(1);
+
+/** Frees an <code>OpusMSDecoder</code> allocated by
+  * opus_multistream_decoder_create().
+  * @param st <tt>OpusMSDecoder</tt>: Multistream decoder state to be freed.
+  */
+OPUS_EXPORT void opus_multistream_decoder_destroy(OpusMSDecoder *st);
+
+/**@}*/
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OPUS_MULTISTREAM_H */

pkg/codec/opus/include/opus_projection.h

@@ -0,0 +1,568 @@
+/* Copyright (c) 2017 Google Inc.
+   Written by Andrew Allen */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/**
+ * @file opus_projection.h
+ * @brief Opus projection reference API
+ */
+
+#ifndef OPUS_PROJECTION_H
+#define OPUS_PROJECTION_H
+
+#include "opus_multistream.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @cond OPUS_INTERNAL_DOC */
+
+/** These are the actual encoder and decoder CTL ID numbers.
+  * They should not be used directly by applications.c
+  * In general, SETs should be even and GETs should be odd.*/
+/**@{*/
+#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN_REQUEST    6001
+#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE_REQUEST    6003
+#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_REQUEST         6005
+/**@}*/
+
+
+/** @endcond */
+
+/** @defgroup opus_projection_ctls Projection specific encoder and decoder CTLs
+  *
+  * These are convenience macros that are specific to the
+  * opus_projection_encoder_ctl() and opus_projection_decoder_ctl()
+  * interface.
+  * The CTLs from @ref opus_genericctls, @ref opus_encoderctls,
+  * @ref opus_decoderctls, and @ref opus_multistream_ctls may be applied to a
+  * projection encoder or decoder as well.
+  */
+/**@{*/
+
+/** Gets the gain (in dB. S7.8-format) of the demixing matrix from the encoder.
+  * @param[out] x <tt>opus_int32 *</tt>: Returns the gain (in dB. S7.8-format)
+  *                                      of the demixing matrix.
+  * @hideinitializer
+  */
+#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN(x) OPUS_PROJECTION_GET_DEMIXING_MATRIX_GAIN_REQUEST, __opus_check_int_ptr(x)
+
+
+/** Gets the size in bytes of the demixing matrix from the encoder.
+  * @param[out] x <tt>opus_int32 *</tt>: Returns the size in bytes of the
+  *                                      demixing matrix.
+  * @hideinitializer
+  */
+#define OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE(x) OPUS_PROJECTION_GET_DEMIXING_MATRIX_SIZE_REQUEST, __opus_check_int_ptr(x)
+
+
+/** Copies the demixing matrix to the supplied pointer location.
+  * @param[out] x <tt>unsigned char *</tt>: Returns the demixing matrix to the
+  *                                         supplied pointer location.
+  * @param y <tt>opus_int32</tt>: The size in bytes of the reserved memory at the
+  *                              pointer location.
+  * @hideinitializer
+  */
+#define OPUS_PROJECTION_GET_DEMIXING_MATRIX(x,y) OPUS_PROJECTION_GET_DEMIXING_MATRIX_REQUEST, x, __opus_check_int(y)
+
+
+/**@}*/
+
+/** Opus projection encoder state.
+ * This contains the complete state of a projection Opus encoder.
+ * It is position independent and can be freely copied.
+ * @see opus_projection_ambisonics_encoder_create
+ */
+typedef struct OpusProjectionEncoder OpusProjectionEncoder;
+
+
+/** Opus projection decoder state.
+  * This contains the complete state of a projection Opus decoder.
+  * It is position independent and can be freely copied.
+  * @see opus_projection_decoder_create
+  * @see opus_projection_decoder_init
+  */
+typedef struct OpusProjectionDecoder OpusProjectionDecoder;
+
+
+/**\name Projection encoder functions */
+/**@{*/
+
+/** Gets the size of an OpusProjectionEncoder structure.
+  * @param channels <tt>int</tt>: The total number of input channels to encode.
+  *                               This must be no more than 255.
+  * @param mapping_family <tt>int</tt>: The mapping family to use for selecting
+  *                                     the appropriate projection.
+  * @returns The size in bytes on success, or a negative error code
+  *          (see @ref opus_errorcodes) on error.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_projection_ambisonics_encoder_get_size(
+    int channels,
+    int mapping_family
+);
+
+
+/** Allocates and initializes a projection encoder state.
+  * Call opus_projection_encoder_destroy() to release
+  * this object when finished.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels in the input signal.
+  *                               This must be at most 255.
+  *                               It may be greater than the number of
+  *                               coded channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param mapping_family <tt>int</tt>: The mapping family to use for selecting
+  *                                     the appropriate projection.
+  * @param[out] streams <tt>int *</tt>: The total number of streams that will
+  *                                     be encoded from the input.
+  * @param[out] coupled_streams <tt>int *</tt>: Number of coupled (2 channel)
+  *                                 streams that will be encoded from the input.
+  * @param application <tt>int</tt>: The target encoder application.
+  *                                  This must be one of the following:
+  * <dl>
+  * <dt>#OPUS_APPLICATION_VOIP</dt>
+  * <dd>Process signal for improved speech intelligibility.</dd>
+  * <dt>#OPUS_APPLICATION_AUDIO</dt>
+  * <dd>Favor faithfulness to the original input.</dd>
+  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
+  * <dd>Configure the minimum possible coding delay by disabling certain modes
+  * of operation.</dd>
+  * </dl>
+  * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
+  *                                   code (see @ref opus_errorcodes) on
+  *                                   failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusProjectionEncoder *opus_projection_ambisonics_encoder_create(
+    opus_int32 Fs,
+    int channels,
+    int mapping_family,
+    int *streams,
+    int *coupled_streams,
+    int application,
+    int *error
+) OPUS_ARG_NONNULL(4) OPUS_ARG_NONNULL(5);
+
+
+/** Initialize a previously allocated projection encoder state.
+  * The memory pointed to by \a st must be at least the size returned by
+  * opus_projection_ambisonics_encoder_get_size().
+  * This is intended for applications which use their own allocator instead of
+  * malloc.
+  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
+  * @see opus_projection_ambisonics_encoder_create
+  * @see opus_projection_ambisonics_encoder_get_size
+  * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state to initialize.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate of the input signal (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels in the input signal.
+  *                               This must be at most 255.
+  *                               It may be greater than the number of
+  *                               coded channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param streams <tt>int</tt>: The total number of streams to encode from the
+  *                              input.
+  *                              This must be no more than the number of channels.
+  * @param coupled_streams <tt>int</tt>: Number of coupled (2 channel) streams
+  *                                      to encode.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      encoded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than the number of input channels.
+  * @param application <tt>int</tt>: The target encoder application.
+  *                                  This must be one of the following:
+  * <dl>
+  * <dt>#OPUS_APPLICATION_VOIP</dt>
+  * <dd>Process signal for improved speech intelligibility.</dd>
+  * <dt>#OPUS_APPLICATION_AUDIO</dt>
+  * <dd>Favor faithfulness to the original input.</dd>
+  * <dt>#OPUS_APPLICATION_RESTRICTED_LOWDELAY</dt>
+  * <dd>Configure the minimum possible coding delay by disabling certain modes
+  * of operation.</dd>
+  * </dl>
+  * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
+  *          on failure.
+  */
+OPUS_EXPORT int opus_projection_ambisonics_encoder_init(
+    OpusProjectionEncoder *st,
+    opus_int32 Fs,
+    int channels,
+    int mapping_family,
+    int *streams,
+    int *coupled_streams,
+    int application
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(5) OPUS_ARG_NONNULL(6);
+
+
+/** Encodes a projection Opus frame.
+  * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state.
+  * @param[in] pcm <tt>const opus_int16*</tt>: The input signal as interleaved
+  *                                            samples.
+  *                                            This must contain
+  *                                            <code>frame_size*channels</code>
+  *                                            samples.
+  * @param frame_size <tt>int</tt>: Number of samples per channel in the input
+  *                                 signal.
+  *                                 This must be an Opus frame size for the
+  *                                 encoder's sampling rate.
+  *                                 For example, at 48 kHz the permitted values
+  *                                 are 120, 240, 480, 960, 1920, and 2880.
+  *                                 Passing in a duration of less than 10 ms
+  *                                 (480 samples at 48 kHz) will prevent the
+  *                                 encoder from using the LPC or hybrid modes.
+  * @param[out] data <tt>unsigned char*</tt>: Output payload.
+  *                                           This must contain storage for at
+  *                                           least \a max_data_bytes.
+  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
+  *                                                 memory for the output
+  *                                                 payload. This may be
+  *                                                 used to impose an upper limit on
+  *                                                 the instant bitrate, but should
+  *                                                 not be used as the only bitrate
+  *                                                 control. Use #OPUS_SET_BITRATE to
+  *                                                 control the bitrate.
+  * @returns The length of the encoded packet (in bytes) on success or a
+  *          negative error code (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_encode(
+    OpusProjectionEncoder *st,
+    const opus_int16 *pcm,
+    int frame_size,
+    unsigned char *data,
+    opus_int32 max_data_bytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+
+/** Encodes a projection Opus frame from floating point input.
+  * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state.
+  * @param[in] pcm <tt>const float*</tt>: The input signal as interleaved
+  *                                       samples with a normal range of
+  *                                       +/-1.0.
+  *                                       Samples with a range beyond +/-1.0
+  *                                       are supported but will be clipped by
+  *                                       decoders using the integer API and
+  *                                       should only be used if it is known
+  *                                       that the far end supports extended
+  *                                       dynamic range.
+  *                                       This must contain
+  *                                       <code>frame_size*channels</code>
+  *                                       samples.
+  * @param frame_size <tt>int</tt>: Number of samples per channel in the input
+  *                                 signal.
+  *                                 This must be an Opus frame size for the
+  *                                 encoder's sampling rate.
+  *                                 For example, at 48 kHz the permitted values
+  *                                 are 120, 240, 480, 960, 1920, and 2880.
+  *                                 Passing in a duration of less than 10 ms
+  *                                 (480 samples at 48 kHz) will prevent the
+  *                                 encoder from using the LPC or hybrid modes.
+  * @param[out] data <tt>unsigned char*</tt>: Output payload.
+  *                                           This must contain storage for at
+  *                                           least \a max_data_bytes.
+  * @param [in] max_data_bytes <tt>opus_int32</tt>: Size of the allocated
+  *                                                 memory for the output
+  *                                                 payload. This may be
+  *                                                 used to impose an upper limit on
+  *                                                 the instant bitrate, but should
+  *                                                 not be used as the only bitrate
+  *                                                 control. Use #OPUS_SET_BITRATE to
+  *                                                 control the bitrate.
+  * @returns The length of the encoded packet (in bytes) on success or a
+  *          negative error code (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_encode_float(
+    OpusProjectionEncoder *st,
+    const float *pcm,
+    int frame_size,
+    unsigned char *data,
+    opus_int32 max_data_bytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+
+/** Frees an <code>OpusProjectionEncoder</code> allocated by
+  * opus_projection_ambisonics_encoder_create().
+  * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state to be freed.
+  */
+OPUS_EXPORT void opus_projection_encoder_destroy(OpusProjectionEncoder *st);
+
+
+/** Perform a CTL function on a projection Opus encoder.
+  *
+  * Generally the request and subsequent arguments are generated by a
+  * convenience macro.
+  * @param st <tt>OpusProjectionEncoder*</tt>: Projection encoder state.
+  * @param request This and all remaining parameters should be replaced by one
+  *                of the convenience macros in @ref opus_genericctls,
+  *                @ref opus_encoderctls, @ref opus_multistream_ctls, or
+  *                @ref opus_projection_ctls
+  * @see opus_genericctls
+  * @see opus_encoderctls
+  * @see opus_multistream_ctls
+  * @see opus_projection_ctls
+  */
+OPUS_EXPORT int opus_projection_encoder_ctl(OpusProjectionEncoder *st, int request, ...) OPUS_ARG_NONNULL(1);
+
+
+/**@}*/
+
+/**\name Projection decoder functions */
+/**@{*/
+
+/** Gets the size of an <code>OpusProjectionDecoder</code> structure.
+  * @param channels <tt>int</tt>: The total number of output channels.
+  *                               This must be no more than 255.
+  * @param streams <tt>int</tt>: The total number of streams coded in the
+  *                              input.
+  *                              This must be no more than 255.
+  * @param coupled_streams <tt>int</tt>: Number streams to decode as coupled
+  *                                      (2 channel) streams.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      coded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than 255.
+  * @returns The size in bytes on success, or a negative error code
+  *          (see @ref opus_errorcodes) on error.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_projection_decoder_get_size(
+    int channels,
+    int streams,
+    int coupled_streams
+);
+
+
+/** Allocates and initializes a projection decoder state.
+  * Call opus_projection_decoder_destroy() to release
+  * this object when finished.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels to output.
+  *                               This must be at most 255.
+  *                               It may be different from the number of coded
+  *                               channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param streams <tt>int</tt>: The total number of streams coded in the
+  *                              input.
+  *                              This must be no more than 255.
+  * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
+  *                                      (2 channel) streams.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      coded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than 255.
+  * @param[in] demixing_matrix <tt>const unsigned char[demixing_matrix_size]</tt>: Demixing matrix
+  *                         that mapping from coded channels to output channels,
+  *                         as described in @ref opus_projection and
+  *                         @ref opus_projection_ctls.
+  * @param demixing_matrix_size <tt>opus_int32</tt>: The size in bytes of the
+  *                                                  demixing matrix, as
+  *                                                  described in @ref
+  *                                                  opus_projection_ctls.
+  * @param[out] error <tt>int *</tt>: Returns #OPUS_OK on success, or an error
+  *                                   code (see @ref opus_errorcodes) on
+  *                                   failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT OpusProjectionDecoder *opus_projection_decoder_create(
+    opus_int32 Fs,
+    int channels,
+    int streams,
+    int coupled_streams,
+    unsigned char *demixing_matrix,
+    opus_int32 demixing_matrix_size,
+    int *error
+) OPUS_ARG_NONNULL(5);
+
+
+/** Intialize a previously allocated projection decoder state object.
+  * The memory pointed to by \a st must be at least the size returned by
+  * opus_projection_decoder_get_size().
+  * This is intended for applications which use their own allocator instead of
+  * malloc.
+  * To reset a previously initialized state, use the #OPUS_RESET_STATE CTL.
+  * @see opus_projection_decoder_create
+  * @see opus_projection_deocder_get_size
+  * @param st <tt>OpusProjectionDecoder*</tt>: Projection encoder state to initialize.
+  * @param Fs <tt>opus_int32</tt>: Sampling rate to decode at (in Hz).
+  *                                This must be one of 8000, 12000, 16000,
+  *                                24000, or 48000.
+  * @param channels <tt>int</tt>: Number of channels to output.
+  *                               This must be at most 255.
+  *                               It may be different from the number of coded
+  *                               channels (<code>streams +
+  *                               coupled_streams</code>).
+  * @param streams <tt>int</tt>: The total number of streams coded in the
+  *                              input.
+  *                              This must be no more than 255.
+  * @param coupled_streams <tt>int</tt>: Number of streams to decode as coupled
+  *                                      (2 channel) streams.
+  *                                      This must be no larger than the total
+  *                                      number of streams.
+  *                                      Additionally, The total number of
+  *                                      coded channels (<code>streams +
+  *                                      coupled_streams</code>) must be no
+  *                                      more than 255.
+  * @param[in] demixing_matrix <tt>const unsigned char[demixing_matrix_size]</tt>: Demixing matrix
+  *                         that mapping from coded channels to output channels,
+  *                         as described in @ref opus_projection and
+  *                         @ref opus_projection_ctls.
+  * @param demixing_matrix_size <tt>opus_int32</tt>: The size in bytes of the
+  *                                                  demixing matrix, as
+  *                                                  described in @ref
+  *                                                  opus_projection_ctls.
+  * @returns #OPUS_OK on success, or an error code (see @ref opus_errorcodes)
+  *          on failure.
+  */
+OPUS_EXPORT int opus_projection_decoder_init(
+    OpusProjectionDecoder *st,
+    opus_int32 Fs,
+    int channels,
+    int streams,
+    int coupled_streams,
+    unsigned char *demixing_matrix,
+    opus_int32 demixing_matrix_size
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(6);
+
+
+/** Decode a projection Opus packet.
+  * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state.
+  * @param[in] data <tt>const unsigned char*</tt>: Input payload.
+  *                                                Use a <code>NULL</code>
+  *                                                pointer to indicate packet
+  *                                                loss.
+  * @param len <tt>opus_int32</tt>: Number of bytes in payload.
+  * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
+  *                                       samples.
+  *                                       This must contain room for
+  *                                       <code>frame_size*channels</code>
+  *                                       samples.
+  * @param frame_size <tt>int</tt>: The number of samples per channel of
+  *                                 available space in \a pcm.
+  *                                 If this is less than the maximum packet duration
+  *                                 (120 ms; 5760 for 48kHz), this function will not be capable
+  *                                 of decoding some packets. In the case of PLC (data==NULL)
+  *                                 or FEC (decode_fec=1), then frame_size needs to be exactly
+  *                                 the duration of audio that is missing, otherwise the
+  *                                 decoder will not be in the optimal state to decode the
+  *                                 next incoming packet. For the PLC and FEC cases, frame_size
+  *                                 <b>must</b> be a multiple of 2.5 ms.
+  * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
+  *                                 forward error correction data be decoded.
+  *                                 If no such data is available, the frame is
+  *                                 decoded as if it were lost.
+  * @returns Number of samples decoded on success or a negative error code
+  *          (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_decode(
+    OpusProjectionDecoder *st,
+    const unsigned char *data,
+    opus_int32 len,
+    opus_int16 *pcm,
+    int frame_size,
+    int decode_fec
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+
+/** Decode a projection Opus packet with floating point output.
+  * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state.
+  * @param[in] data <tt>const unsigned char*</tt>: Input payload.
+  *                                                Use a <code>NULL</code>
+  *                                                pointer to indicate packet
+  *                                                loss.
+  * @param len <tt>opus_int32</tt>: Number of bytes in payload.
+  * @param[out] pcm <tt>opus_int16*</tt>: Output signal, with interleaved
+  *                                       samples.
+  *                                       This must contain room for
+  *                                       <code>frame_size*channels</code>
+  *                                       samples.
+  * @param frame_size <tt>int</tt>: The number of samples per channel of
+  *                                 available space in \a pcm.
+  *                                 If this is less than the maximum packet duration
+  *                                 (120 ms; 5760 for 48kHz), this function will not be capable
+  *                                 of decoding some packets. In the case of PLC (data==NULL)
+  *                                 or FEC (decode_fec=1), then frame_size needs to be exactly
+  *                                 the duration of audio that is missing, otherwise the
+  *                                 decoder will not be in the optimal state to decode the
+  *                                 next incoming packet. For the PLC and FEC cases, frame_size
+  *                                 <b>must</b> be a multiple of 2.5 ms.
+  * @param decode_fec <tt>int</tt>: Flag (0 or 1) to request that any in-band
+  *                                 forward error correction data be decoded.
+  *                                 If no such data is available, the frame is
+  *                                 decoded as if it were lost.
+  * @returns Number of samples decoded on success or a negative error code
+  *          (see @ref opus_errorcodes) on failure.
+  */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT int opus_projection_decode_float(
+    OpusProjectionDecoder *st,
+    const unsigned char *data,
+    opus_int32 len,
+    float *pcm,
+    int frame_size,
+    int decode_fec
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+
+/** Perform a CTL function on a projection Opus decoder.
+  *
+  * Generally the request and subsequent arguments are generated by a
+  * convenience macro.
+  * @param st <tt>OpusProjectionDecoder*</tt>: Projection decoder state.
+  * @param request This and all remaining parameters should be replaced by one
+  *                of the convenience macros in @ref opus_genericctls,
+  *                @ref opus_decoderctls, @ref opus_multistream_ctls, or
+  *                @ref opus_projection_ctls.
+  * @see opus_genericctls
+  * @see opus_decoderctls
+  * @see opus_multistream_ctls
+  * @see opus_projection_ctls
+  */
+OPUS_EXPORT int opus_projection_decoder_ctl(OpusProjectionDecoder *st, int request, ...) OPUS_ARG_NONNULL(1);
+
+
+/** Frees an <code>OpusProjectionDecoder</code> allocated by
+  * opus_projection_decoder_create().
+  * @param st <tt>OpusProjectionDecoder</tt>: Projection decoder state to be freed.
+  */
+OPUS_EXPORT void opus_projection_decoder_destroy(OpusProjectionDecoder *st);
+
+
+/**@}*/
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OPUS_PROJECTION_H */

pkg/codec/opus/include/opus_types.h

@@ -0,0 +1,166 @@
+/* (C) COPYRIGHT 1994-2002 Xiph.Org Foundation */
+/* Modified by Jean-Marc Valin */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/* opus_types.h based on ogg_types.h from libogg */
+
+/**
+   @file opus_types.h
+   @brief Opus reference implementation types
+*/
+#ifndef OPUS_TYPES_H
+#define OPUS_TYPES_H
+
+#define opus_int         int                     /* used for counters etc; at least 16 bits */
+#define opus_int64       long long
+#define opus_int8        signed char
+
+#define opus_uint        unsigned int            /* used for counters etc; at least 16 bits */
+#define opus_uint64      unsigned long long
+#define opus_uint8       unsigned char
+
+/* Use the real stdint.h if it's there (taken from Paul Hsieh's pstdint.h) */
+#if (defined(__STDC__) && __STDC__ && defined(__STDC_VERSION__) && __STDC_VERSION__ >= 199901L) || (defined(__GNUC__) && (defined(_STDINT_H) || defined(_STDINT_H_)) || defined (HAVE_STDINT_H))
+#include <stdint.h>
+#  undef opus_int64
+#  undef opus_int8
+#  undef opus_uint64
+#  undef opus_uint8
+   typedef int8_t opus_int8;
+   typedef uint8_t opus_uint8;
+   typedef int16_t opus_int16;
+   typedef uint16_t opus_uint16;
+   typedef int32_t opus_int32;
+   typedef uint32_t opus_uint32;
+   typedef int64_t opus_int64;
+   typedef uint64_t opus_uint64;
+#elif defined(_WIN32)
+
+#  if defined(__CYGWIN__)
+#    include <_G_config.h>
+     typedef _G_int32_t opus_int32;
+     typedef _G_uint32_t opus_uint32;
+     typedef _G_int16 opus_int16;
+     typedef _G_uint16 opus_uint16;
+#  elif defined(__MINGW32__)
+     typedef short opus_int16;
+     typedef unsigned short opus_uint16;
+     typedef int opus_int32;
+     typedef unsigned int opus_uint32;
+#  elif defined(__MWERKS__)
+     typedef int opus_int32;
+     typedef unsigned int opus_uint32;
+     typedef short opus_int16;
+     typedef unsigned short opus_uint16;
+#  else
+     /* MSVC/Borland */
+     typedef __int32 opus_int32;
+     typedef unsigned __int32 opus_uint32;
+     typedef __int16 opus_int16;
+     typedef unsigned __int16 opus_uint16;
+#  endif
+
+#elif defined(__MACOS__)
+
+#  include <sys/types.h>
+   typedef SInt16 opus_int16;
+   typedef UInt16 opus_uint16;
+   typedef SInt32 opus_int32;
+   typedef UInt32 opus_uint32;
+
+#elif (defined(__APPLE__) && defined(__MACH__)) /* MacOS X Framework build */
+
+#  include <sys/types.h>
+   typedef int16_t opus_int16;
+   typedef u_int16_t opus_uint16;
+   typedef int32_t opus_int32;
+   typedef u_int32_t opus_uint32;
+
+#elif defined(__BEOS__)
+
+   /* Be */
+#  include <inttypes.h>
+   typedef int16 opus_int16;
+   typedef u_int16 opus_uint16;
+   typedef int32_t opus_int32;
+   typedef u_int32_t opus_uint32;
+
+#elif defined (__EMX__)
+
+   /* OS/2 GCC */
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef int opus_int32;
+   typedef unsigned int opus_uint32;
+
+#elif defined (DJGPP)
+
+   /* DJGPP */
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef int opus_int32;
+   typedef unsigned int opus_uint32;
+
+#elif defined(R5900)
+
+   /* PS2 EE */
+   typedef int opus_int32;
+   typedef unsigned opus_uint32;
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+
+#elif defined(__SYMBIAN32__)
+
+   /* Symbian GCC */
+   typedef signed short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef signed int opus_int32;
+   typedef unsigned int opus_uint32;
+
+#elif defined(CONFIG_TI_C54X) || defined (CONFIG_TI_C55X)
+
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef long opus_int32;
+   typedef unsigned long opus_uint32;
+
+#elif defined(CONFIG_TI_C6X)
+
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef int opus_int32;
+   typedef unsigned int opus_uint32;
+
+#else
+
+   /* Give up, take a reasonable guess */
+   typedef short opus_int16;
+   typedef unsigned short opus_uint16;
+   typedef int opus_int32;
+   typedef unsigned int opus_uint32;
+
+#endif
+
+#endif  /* OPUS_TYPES_H */