Don't allow periods in zone or camera group names (#13400)

* Update discussion templates

* camera support go2rtc

.cspell/frigate-dictionary.txt

@@ -0,0 +1,168 @@
+rtmp
+edgetpu
+labelmap
+rockchip
+jetson
+rocm
+vaapi
+CUDA
+hwaccel
+RTSP
+Hikvision
+Dahua
+Amcrest
+Reolink
+Loryta
+Beelink
+Celeron
+vaapi
+blakeblackshear
+workdir
+onvif
+autotracking
+openvino
+tflite
+deepstack
+codeproject
+udev
+tailscale
+restream
+restreaming
+webrtc
+ssdlite
+mobilenet
+mosquitto
+datasheet
+Jellyfin
+Radeon
+libva
+Ubiquiti
+Unifi
+Tapo
+Annke
+autotracker
+autotracked
+variations
+ONVIF
+traefik
+devcontainer
+rootfs
+ffprobe
+autotrack
+logpipe
+imread
+imwrite
+imencode
+imutils
+thresholded
+timelapse
+ultrafast
+sleeptime
+radeontop
+vainfo
+tmpfs
+homography
+websockets
+LIBAVFORMAT
+NTSC
+onnxruntime
+fourcc
+radeonsi
+paho
+imagestream
+jsonify
+cgroups
+sysconf
+memlimit
+gpuload
+nvml
+setproctitle
+psutil
+Kalman
+frontdoor
+namedtuples
+zeep
+fflags
+probesize
+wallclock
+rknn
+socs
+pydantic
+shms
+imdecode
+colormap
+webui
+mse
+jsmpeg
+unreviewed
+Chromecast
+Swipeable
+flac
+scroller
+cmdline
+toggleable
+bottombar
+opencv
+apexcharts
+buildx
+mqtt
+rawvideo
+defragment
+Norfair
+subclassing
+yolo
+tensorrt
+blackshear
+stylelint
+HACS
+homeassistant
+hass
+castable
+mobiledet
+framebuffer
+mjpeg
+substream
+codeowner
+noninteractive
+restreamed
+mountpoint
+fstype
+OWASP
+iotop
+letsencrypt
+fullchain
+lsusb
+iostat
+usermod
+balena
+passwordless
+debconf
+dpkg
+poweroff
+surveillance
+qnap
+homekit
+colorspace
+quantisation
+skylake
+Cuvid
+foscam
+onnx
+numpy
+protobuf
+aarch
+amdgpu
+chipset
+referer
+mpegts
+webp
+authelia
+authentik
+unichip
+rebranded
+udevadm
+automations
+unraid
+hideable
+healthcheck
+keepalive

.devcontainer/devcontainer.json

@@ -0,0 +1,93 @@
+{
+  "name": "Frigate Devcontainer",
+  "dockerComposeFile": "../docker-compose.yml",
+  "service": "devcontainer",
+  "workspaceFolder": "/workspace/frigate",
+  "initializeCommand": ".devcontainer/initialize.sh",
+  "postCreateCommand": ".devcontainer/post_create.sh",
+  "overrideCommand": false,
+  "remoteUser": "vscode",
+  "features": {
+    "ghcr.io/devcontainers/features/common-utils:1": {}
+  },
+  "forwardPorts": [8971, 5000, 5001, 5173, 8554, 8555],
+  "portsAttributes": {
+    "8971": {
+      "label": "External NGINX",
+      "onAutoForward": "silent"
+    },
+    "5000": {
+      "label": "Internal NGINX",
+      "onAutoForward": "silent"
+    },
+    "5001": {
+      "label": "Frigate API",
+      "onAutoForward": "silent"
+    },
+    "5173": {
+      "label": "Vite Server",
+      "onAutoForward": "silent"
+    },
+    "8554": {
+      "label": "gortc RTSP",
+      "onAutoForward": "silent"
+    },
+    "8555": {
+      "label": "go2rtc WebRTC",
+      "onAutoForward": "silent"
+    }
+  },
+  "customizations": {
+    "vscode": {
+      "extensions": [
+        "ms-python.python",
+        "ms-python.vscode-pylance",
+        "visualstudioexptteam.vscodeintellicode",
+        "mhutchie.git-graph",
+        "ms-azuretools.vscode-docker",
+        "streetsidesoftware.code-spell-checker",
+        "esbenp.prettier-vscode",
+        "dbaeumer.vscode-eslint",
+        "mikestead.dotenv",
+        "csstools.postcss",
+        "blanu.vscode-styled-jsx",
+        "bradlc.vscode-tailwindcss",
+        "charliermarsh.ruff"
+      ],
+      "settings": {
+        "remote.autoForwardPorts": false,
+        "python.formatting.provider": "none",
+        "python.languageServer": "Pylance",
+        "editor.formatOnPaste": false,
+        "editor.formatOnSave": true,
+        "editor.formatOnType": true,
+        "python.testing.pytestEnabled": false,
+        "python.testing.unittestEnabled": true,
+        "python.testing.unittestArgs": ["-v", "-s", "./frigate/test"],
+        "files.trimTrailingWhitespace": true,
+        "eslint.workingDirectories": ["./web"],
+        "isort.args": ["--settings-path=./pyproject.toml"],
+        "[python]": {
+          "editor.defaultFormatter": "charliermarsh.ruff",
+          "editor.formatOnSave": true,
+          "editor.codeActionsOnSave": {
+            "source.fixAll": true,
+            "source.organizeImports": true
+          }
+        },
+        "[json][jsonc]": {
+          "editor.defaultFormatter": "esbenp.prettier-vscode"
+        },
+        "[jsx][js][tsx][ts]": {
+          "editor.codeActionsOnSave": [
+            "source.addMissingImports",
+            "source.fixAll"
+          ],
+          "editor.tabSize": 2
+        },
+        "cSpell.ignoreWords": ["rtmp"],
+        "cSpell.words": ["preact", "astype", "hwaccel", "mqtt"]
+      }
+    }
+  }
+}

.devcontainer/initialize.sh

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+set -euo pipefail
+
+# These folders needs to be created and owned by the host user
+mkdir -p debug web/dist
+
+if [[ -f "config/config.yml" ]]; then
+  echo "config/config.yml already exists, skipping initialization" >&2
+else
+  echo "initializing config/config.yml" >&2
+  cp -fv config/config.yml.example config/config.yml
+fi

.devcontainer/post_create.sh

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+set -euxo pipefail
+
+# Cleanup the old github host key
+sed -i -e '/AAAAB3NzaC1yc2EAAAABIwAAAQEAq2A7hRGmdnm9tUDbO9IDSwBK6TbQa+PXYPCPy6rbTrTtw7PHkccKrpp0yVhp5HdEIcKr6pLlVDBfOLX9QUsyCOV0wzfjIJNlGEYsdlLJizHhbn2mUjvSAHQqZETYP81eFzLQNnPHt4EVVUh7VfDESU84KezmD5QlWpXLmvU31\/yMf+Se8xhHTvKSCZIFImWwoG6mbUoWf9nzpIoaSjB+weqqUUmpaaasXVal72J+UX2B+2RPW3RcT0eOzQgqlJL3RKrTJvdsjE3JEAvGq3lGHSZXy28G3skua2SmVi\/w4yCE6gbODqnTWlg7+wC604ydGXA8VJiS5ap43JXiUFFAaQ==/d' ~/.ssh/known_hosts
+# Add new github host key
+curl -L https://api.github.com/meta | jq -r '.ssh_keys | .[]' | \
+  sed -e 's/^/github.com /' >> ~/.ssh/known_hosts
+
+# Frigate normal container runs as root, so it have permission to create
+# the folders. But the devcontainer runs as the host user, so we need to
+# create the folders and give the host user permission to write to them.
+sudo mkdir -p /media/frigate
+sudo chown -R "$(id -u):$(id -g)" /media/frigate
+
+# When started as a service, LIBAVFORMAT_VERSION_MAJOR is defined in the
+# s6 service file. For dev, where frigate is started from an interactive
+# shell, we define it in .bashrc instead.
+echo 'export LIBAVFORMAT_VERSION_MAJOR=$(ffmpeg -version | grep -Po "libavformat\W+\K\d+")' >> $HOME/.bashrc
+
+make version
+
+cd web
+
+npm install
+
+npm run build

.dockerignore

@@ -1 +1,16 @@
-README.md
+README.md
+docs/
+.gitignore
+debug
+config/
+*.pyc
+.git
+core
+*.mp4
+*.jpg
+*.db
+*.ts
+
+web/dist/
+web/node_modules/
+web/.npm

.github/DISCUSSION_TEMPLATE/camera-support.yml

@@ -0,0 +1,135 @@
+title: "[Camera Support]: "
+labels: ["support", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support or questions for an issue with your cameras.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: What browser(s) are you using?
+      placeholder: Google Chrome 88.0.4324.150
+      description: >
+        Provide the full name and don't forget to add the version!
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: ffprobe
+    attributes:
+      label: FFprobe output from your camera
+      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: stats
+    attributes:
+      label: Frigate stats
+      description: Output from frigate's /api/stats endpoint
+      render: json
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: object-detector
+    attributes:
+      label: Object Detector
+      options:
+        - Coral
+        - OpenVino
+        - TensorRT
+        - RKNN
+        - Other
+        - CPU (no Coral)
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/config-support.yml

@@ -0,0 +1,102 @@
+title: "[Config Support]: "
+labels: ["support", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support or questions related to Frigate's configuration and config file.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: stats
+    attributes:
+      label: Frigate stats
+      description: Output from frigate's /api/stats endpoint
+      render: json
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: object-detector
+    attributes:
+      label: Object Detector
+      options:
+        - Coral
+        - OpenVino
+        - TensorRT
+        - RKNN
+        - Other
+        - CPU (no coral)
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop or simple cut/paste is possible in this field
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/detector-support.yml

@@ -0,0 +1,106 @@
+title: "[Detector Support]: "
+labels: ["support", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support or questions related to Frigate's object detectors.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: docker
+    attributes:
+      label: docker-compose file or Docker CLI command
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: object-detector
+    attributes:
+      label: Object Detector
+      options:
+        - Coral
+        - OpenVino
+        - TensorRT
+        - RKNN
+        - Other
+        - CPU (no coral)
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/general-support.yml

@@ -0,0 +1,133 @@
+title: "[Support]: "
+labels: ["support", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support for issues that don't fall into any specific category.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: What browser(s) are you using?
+      placeholder: Google Chrome 88.0.4324.150
+      description: >
+        Provide the full name and don't forget to add the version!
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: ffprobe
+    attributes:
+      label: FFprobe output from your camera
+      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: stats
+    attributes:
+      label: Frigate stats
+      description: Output from frigate's /api/stats endpoint
+      render: json
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: object-detector
+    attributes:
+      label: Object Detector
+      options:
+        - Coral
+        - OpenVino
+        - TensorRT
+        - RKNN
+        - Other
+        - CPU (no coral)
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/hardware-acceleration-support.yml

@@ -0,0 +1,124 @@
+title: "[HW Accel Support]: "
+labels: ["support", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form to submit a support request for hardware acceleration issues.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: In which browser(s) are you experiencing the issue with?
+      placeholder: Google Chrome 88.0.4324.150
+      description: >
+        Provide the full name and don't forget to add the version!
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: docker
+    attributes:
+      label: docker-compose file or Docker CLI command
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: ffprobe
+    attributes:
+      label: FFprobe output from your camera
+      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
+      render: shell
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/question.yml

@@ -0,0 +1,21 @@
+title: "[Question]: "
+labels: ["question"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for questions you have about Frigate.
+
+        Before submitting your question, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        **If you are looking for support, start a new discussion and use a support category.**
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: textarea
+    id: description
+    attributes:
+      label: "What is your question?"
+    validations:
+      required: true

.github/DISCUSSION_TEMPLATE/report-a-bug.yml

@@ -0,0 +1,146 @@
+title: "[Bug]: "
+labels: ["bug", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form to submit a reproducible bug in Frigate or Frigate's UI.
+
+        Before submitting your bug report, please [search the discussions][discussions], look at recent open and closed [pull requests][prs], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your bug has already been fixed by the developers or reported by the community.
+
+        **If you are unsure if your issue is actually a bug or not, please submit a support request first.**
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [prs]: https://www.github.com/blakeblackshear/frigate/pulls
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: checkboxes
+    attributes:
+      label: Checklist
+      description: Please verify that you've followed these steps
+      options:
+        - label: I have updated to the latest available Frigate version.
+          required: true
+        - label: I have cleared the cache of my browser.
+          required: true
+        - label: I have tried a different browser to see if it is related to my browser.
+          required: true
+        - label: I have tried reproducing the issue in [incognito mode](https://www.computerworld.com/article/1719851/how-to-go-incognito-in-chrome-firefox-safari-and-edge.html) to rule out problems with any third party extensions or plugins I have installed.
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+      description: Provide a clear and concise description of what the bug is.
+    validations:
+      required: true
+  - type: textarea
+    id: steps
+    attributes:
+      label: Steps to reproduce
+      description: |
+        Please tell us exactly how to reproduce your issue.
+        Provide clear and concise step by step instructions and add code snippets if needed.
+      value: |
+        1.
+        2.
+        3.
+        ...
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: In which browser(s) are you experiencing the issue with?
+      placeholder: Google Chrome 88.0.4324.150
+      description: >
+        Provide the full name and don't forget to add the version!
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: docker
+    attributes:
+      label: docker-compose file or Docker CLI command
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of all tabs.
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/FUNDING.yml

@@ -0,0 +1,4 @@
+github:
+  - blakeblackshear
+  - NickM-27
+  - hawkeye217

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,8 @@
+blank_issues_enabled: false
+contact_links:
+  - name: Frigate Support
+    url: https://github.com/blakeblackshear/frigate/discussions/new/choose
+    about: Get support for setting up or troubleshooting Frigate.
+  - name: Frigate Bug Report
+    url: https://github.com/blakeblackshear/frigate/discussions/new/choose
+    about: Report a specific UI or backend bug.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,20 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: enhancement
+assignees: ''
+
+---
+
+**Describe what you are trying to accomplish and why in non technical terms**
+I want to be able to ... so that I can ... 
+
+**Describe the solution you'd like**
+A clear and concise description of what you want to happen.
+
+**Describe alternatives you've considered**
+A clear and concise description of any alternative solutions or features you've considered.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

.github/actions/setup/action.yml

@@ -0,0 +1,50 @@
+name: 'Setup'
+description: 'Set up QEMU and Buildx'
+inputs:
+  GITHUB_TOKEN:
+    required: true
+outputs:
+  image-name:
+    value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ steps.create-short-sha.outputs.SHORT_SHA }}
+  cache-name:
+    value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:cache
+runs:
+  using: "composite"
+  steps:
+    # Stop docker so we can mount more space at /var/lib/docker
+    - name: Stop docker
+      run: sudo systemctl stop docker
+      shell: bash
+    # This creates a virtual volume at /var/lib/docker to maximize the size
+    # As of 2/14/2024, this results in 97G for docker images
+    - name: Maximize build space
+      uses: easimon/maximize-build-space@master
+      with:
+        remove-dotnet: 'true'
+        remove-android: 'true'
+        remove-haskell: 'true'
+        remove-codeql: 'true'
+        build-mount-path: '/var/lib/docker'
+    - name: Start docker
+      run: sudo systemctl start docker
+      shell: bash
+    - id: lowercaseRepo
+      uses: ASzc/change-string-case-action@v5
+      with:
+        string: ${{ github.repository }}
+    - name: Set up QEMU
+      uses: docker/setup-qemu-action@v2
+    - name: Set up Docker Buildx
+      uses: docker/setup-buildx-action@v2
+    - name: Log in to the Container registry
+      uses: docker/login-action@465a07811f14bebb1938fbed4728c6a1ff8901fc
+      with:
+        registry: ghcr.io
+        username: ${{ github.actor }}
+        password: ${{ inputs.GITHUB_TOKEN }}
+    - name: Create version file
+      run: make version
+      shell: bash
+    - id: create-short-sha
+      run: echo "SHORT_SHA=${GITHUB_SHA::7}" >> $GITHUB_OUTPUT
+      shell: bash

.github/dependabot.yml

@@ -0,0 +1,40 @@
+version: 2
+updates:
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      interval: daily
+    open-pull-requests-limit: 10
+    target-branch: dev
+  - package-ecosystem: "docker"
+    directory: "/docker"
+    schedule:
+      interval: daily
+    open-pull-requests-limit: 10
+    target-branch: dev
+  - package-ecosystem: "pip"
+    directory: "/docker/main"
+    schedule:
+      interval: daily
+    open-pull-requests-limit: 10
+    target-branch: dev
+  - package-ecosystem: "pip"
+    directory: "/docker/tensorrt"
+    schedule:
+      interval: daily
+    open-pull-requests-limit: 10
+    target-branch: dev
+  - package-ecosystem: "npm"
+    directory: "/web"
+    schedule:
+      interval: daily
+    open-pull-requests-limit: 10
+    target-branch: dev
+  - package-ecosystem: "npm"
+    directory: "/docs"
+    schedule:
+      interval: daily
+    allow:
+      - dependency-name: "@docusaurus/*"
+    open-pull-requests-limit: 10
+    target-branch: dev

.github/workflows/ci.yml

@@ -0,0 +1,235 @@
+name: CI
+
+on:
+  workflow_dispatch:
+  push:
+    branches:
+      - dev
+      - master
+
+# only run the latest commit to avoid cache overwrites
+concurrency:
+  group: ${{ github.ref }}
+  cancel-in-progress: true
+
+env:
+  PYTHON_VERSION: 3.9
+
+jobs:
+  amd64_build:
+    runs-on: ubuntu-latest
+    name: AMD64 Build
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+      - name: Set up QEMU and Buildx
+        id: setup
+        uses: ./.github/actions/setup
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      - name: Build and push amd64 standard build
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: docker/main/Dockerfile
+          push: true
+          platforms: linux/amd64
+          target: frigate
+          tags: ${{ steps.setup.outputs.image-name }}-amd64
+          cache-from: type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64
+  arm64_build:
+    runs-on: ubuntu-latest
+    name: ARM Build
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+      - name: Set up QEMU and Buildx
+        id: setup
+        uses: ./.github/actions/setup
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      - name: Build and push arm64 standard build
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: docker/main/Dockerfile
+          push: true
+          platforms: linux/arm64
+          target: frigate
+          tags: |
+            ${{ steps.setup.outputs.image-name }}-standard-arm64
+          cache-from: type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64
+      - name: Build and push RPi build
+        uses: docker/bake-action@v4
+        with:
+          push: true
+          targets: rpi
+          files: docker/rpi/rpi.hcl
+          set: |
+            rpi.tags=${{ steps.setup.outputs.image-name }}-rpi
+            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64
+            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64,mode=max
+      - name: Build and push Rockchip build
+        uses: docker/bake-action@v3
+        with:
+          push: true
+          targets: rk
+          files: docker/rockchip/rk.hcl
+          set: |
+            rk.tags=${{ steps.setup.outputs.image-name }}-rk
+            *.cache-from=type=gha
+  jetson_jp4_build:
+    runs-on: ubuntu-latest
+    name: Jetson Jetpack 4
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+      - name: Set up QEMU and Buildx
+        id: setup
+        uses: ./.github/actions/setup
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      - name: Build and push TensorRT (Jetson, Jetpack 4)
+        env:
+          ARCH: arm64
+          BASE_IMAGE: timongentzsch/l4t-ubuntu20-opencv:latest
+          SLIM_BASE: timongentzsch/l4t-ubuntu20-opencv:latest
+          TRT_BASE: timongentzsch/l4t-ubuntu20-opencv:latest
+        uses: docker/bake-action@v4
+        with:
+          push: true
+          targets: tensorrt
+          files: docker/tensorrt/trt.hcl
+          set: |
+            tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt-jp4
+            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp4
+            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp4,mode=max
+  jetson_jp5_build:
+    runs-on: ubuntu-latest
+    name: Jetson Jetpack 5
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+      - name: Set up QEMU and Buildx
+        id: setup
+        uses: ./.github/actions/setup
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      - name: Build and push TensorRT (Jetson, Jetpack 5)
+        env:
+          ARCH: arm64
+          BASE_IMAGE: nvcr.io/nvidia/l4t-tensorrt:r8.5.2-runtime
+          SLIM_BASE: nvcr.io/nvidia/l4t-tensorrt:r8.5.2-runtime
+          TRT_BASE: nvcr.io/nvidia/l4t-tensorrt:r8.5.2-runtime
+        uses: docker/bake-action@v4
+        with:
+          push: true
+          targets: tensorrt
+          files: docker/tensorrt/trt.hcl
+          set: |
+            tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt-jp5
+            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp5
+            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp5,mode=max
+  amd64_extra_builds:
+    runs-on: ubuntu-latest
+    name: AMD64 Extra Build
+    needs:
+      - amd64_build
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+      - name: Set up QEMU and Buildx
+        id: setup
+        uses: ./.github/actions/setup
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      - name: Build and push TensorRT (x86 GPU)
+        env:
+          COMPUTE_LEVEL: "50 60 70 80 90"
+        uses: docker/bake-action@v4
+        with:
+          push: true
+          targets: tensorrt
+          files: docker/tensorrt/trt.hcl
+          set: |
+            tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt
+            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64
+            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64,mode=max
+      #- name: AMD/ROCm general build
+      #  env:
+      #    AMDGPU: gfx
+      #    HSA_OVERRIDE: 0
+      #  uses: docker/bake-action@v3
+      #  with:
+      #    push: true
+      #    targets: rocm
+      #    files: docker/rocm/rocm.hcl
+      #    set: |
+      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm
+      #      *.cache-from=type=gha
+      #- name: AMD/ROCm gfx900
+      #  env:
+      #    AMDGPU: gfx900
+      #    HSA_OVERRIDE: 1
+      #    HSA_OVERRIDE_GFX_VERSION: 9.0.0
+      #  uses: docker/bake-action@v3
+      #  with:
+      #    push: true
+      #    targets: rocm
+      #    files: docker/rocm/rocm.hcl
+      #    set: |
+      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm-gfx900
+      #      *.cache-from=type=gha
+      #- name: AMD/ROCm gfx1030
+      #  env:
+      #    AMDGPU: gfx1030
+      #    HSA_OVERRIDE: 1
+      #    HSA_OVERRIDE_GFX_VERSION: 10.3.0
+      #  uses: docker/bake-action@v3
+      #  with:
+      #    push: true
+      #    targets: rocm
+      #    files: docker/rocm/rocm.hcl
+      #    set: |
+      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm-gfx1030
+      #      *.cache-from=type=gha
+      #- name: AMD/ROCm gfx1100
+      #  env:
+      #    AMDGPU: gfx1100
+      #    HSA_OVERRIDE: 1
+      #    HSA_OVERRIDE_GFX_VERSION: 11.0.0
+      #  uses: docker/bake-action@v3
+      #  with:
+      #    push: true
+      #    targets: rocm
+      #    files: docker/rocm/rocm.hcl
+      #    set: |
+      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm-gfx1100
+      #      *.cache-from=type=gha
+  # The majority of users running arm64 are rpi users, so the rpi
+  # build should be the primary arm64 image
+  assemble_default_build:
+    runs-on: ubuntu-latest
+    name: Assemble and push default build
+    needs:
+      - amd64_build
+      - arm64_build
+    steps:
+      - id: lowercaseRepo
+        uses: ASzc/change-string-case-action@v6
+        with:
+          string: ${{ github.repository }}
+      - name: Log in to the Container registry
+        uses: docker/login-action@0d4c9c5ea7693da7b068278f7b52bda2a190a446
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+      - name: Create short sha
+        run: echo "SHORT_SHA=${GITHUB_SHA::7}" >> $GITHUB_ENV
+      - uses: int128/docker-manifest-create-action@v2
+        with:
+          tags: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}
+          sources: |
+            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}-amd64
+            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}-rpi

.github/workflows/dependabot-auto-merge.yaml

@@ -0,0 +1,24 @@
+name: dependabot-auto-merge
+on: pull_request
+
+permissions:
+  contents: write
+
+jobs:
+  dependabot-auto-merge:
+    runs-on: ubuntu-latest
+    if: github.actor == 'dependabot[bot]'
+    steps:
+      - name: Get Dependabot metadata
+        id: metadata
+        uses: dependabot/fetch-metadata@v2
+        with:
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+      - name: Enable auto-merge for Dependabot PRs
+        if: steps.metadata.outputs.dependency-type == 'direct:development' && (steps.metadata.outputs.update-type == 'version-update:semver-minor' || steps.metadata.outputs.update-type == 'version-update:semver-patch')
+        run: |
+          gh pr review --approve "$PR_URL"
+          gh pr merge --auto --squash "$PR_URL"
+        env:
+          PR_URL: ${{ github.event.pull_request.html_url }}
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/pull_request.yml

@@ -0,0 +1,105 @@
+name: On pull request
+
+on: pull_request
+
+env:
+  DEFAULT_PYTHON: 3.9
+
+jobs:
+  build_devcontainer:
+    runs-on: ubuntu-latest
+    name: Build Devcontainer
+    # The Dockerfile contains features that requires buildkit, and since the
+    # devcontainer cli uses docker-compose to build the image, the only way to
+    # ensure docker-compose uses buildkit is to explicitly enable it.
+    env:
+      DOCKER_BUILDKIT: "1"
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-node@master
+        with:
+          node-version: 16.x
+      - name: Install devcontainer cli
+        run: npm install --global @devcontainers/cli
+      - name: Build devcontainer
+        run: devcontainer build --workspace-folder .
+      # It would be nice to also test the following commands, but for some
+      # reason they don't work even though in VS Code devcontainer works.
+      # - name: Start devcontainer
+      #   run: devcontainer up --workspace-folder .
+      # - name: Run devcontainer scripts
+      #   run: devcontainer run-user-commands --workspace-folder .
+
+  web_lint:
+    name: Web - Lint
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-node@master
+        with:
+          node-version: 16.x
+      - run: npm install
+        working-directory: ./web
+      - name: Lint
+        run: npm run lint
+        working-directory: ./web
+
+  web_test:
+    name: Web - Test
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: actions/setup-node@master
+        with:
+          node-version: 20.x
+      - run: npm install
+        working-directory: ./web
+      # - name: Test
+      #   run: npm run test
+      #   working-directory: ./web
+
+  python_checks:
+    runs-on: ubuntu-latest
+    name: Python Checks
+    steps:
+      - name: Check out the repository
+        uses: actions/checkout@v4
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
+        uses: actions/setup-python@v5.1.0
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+      - name: Install requirements
+        run: |
+          python3 -m pip install -U pip
+          python3 -m pip install -r docker/main/requirements-dev.txt
+      - name: Check formatting
+        run: |
+          ruff format --check --diff frigate migrations docker *.py
+      - name: Check lint
+        run: |
+          ruff check frigate migrations docker *.py
+
+  python_tests:
+    runs-on: ubuntu-latest
+    name: Python Tests
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+      - uses: actions/setup-node@master
+        with:
+          node-version: 16.x
+      - run: npm install
+        working-directory: ./web
+      - name: Build web
+        run: npm run build
+        working-directory: ./web
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+      - name: Build
+        run: make
+      - name: Run mypy
+        run: docker run --rm --entrypoint=python3 frigate:latest -u -m mypy --config-file frigate/mypy.ini frigate
+      - name: Run tests
+        run: docker run --rm --entrypoint=python3 frigate:latest -u -m unittest

.github/workflows/release.yml

@@ -0,0 +1,47 @@
+name: On release
+
+on:
+  workflow_dispatch:
+  release:
+    types: [published]
+
+jobs:
+  release:
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v4
+      - id: lowercaseRepo
+        uses: ASzc/change-string-case-action@v6
+        with:
+          string: ${{ github.repository }}
+      - name: Log in to the Container registry
+        uses: docker/login-action@0d4c9c5ea7693da7b068278f7b52bda2a190a446
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+      - name: Create tag variables
+        run: |
+          BUILD_TYPE=$([[ "${{ github.ref_name }}" =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]] && echo "stable" || echo "beta")
+          echo "BUILD_TYPE=${BUILD_TYPE}" >> $GITHUB_ENV
+          echo "BASE=ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}" >> $GITHUB_ENV
+          echo "BUILD_TAG=${GITHUB_SHA::7}" >> $GITHUB_ENV
+          echo "CLEAN_VERSION=$(echo ${GITHUB_REF##*/} | tr '[:upper:]' '[:lower:]' | sed 's/^[v]//')" >> $GITHUB_ENV
+      - name: Tag and push the main image
+        run: |
+          VERSION_TAG=${BASE}:${CLEAN_VERSION}
+          STABLE_TAG=${BASE}:stable
+          PULL_TAG=${BASE}:${BUILD_TAG}
+          docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG} docker://${VERSION_TAG}
+          for variant in standard-arm64 tensorrt tensorrt-jp4 tensorrt-jp5 rk; do
+            docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG}-${variant} docker://${VERSION_TAG}-${variant}
+          done
+
+          # stable tag
+          if [[ "${BUILD_TYPE}" == "stable" ]]; then
+            docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG} docker://${STABLE_TAG}
+            for variant in standard-arm64 tensorrt tensorrt-jp4 tensorrt-jp5 rk; do
+              docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG}-${variant} docker://${STABLE_TAG}-${variant}
+            done
+          fi

.github/workflows/stale.yml

@@ -0,0 +1,41 @@
+# Close Stale Issues
+# Warns and then closes issues and PRs that have had no activity for a specified amount of time.
+# https://github.com/actions/stale
+
+name: "Stalebot"
+on:
+  schedule:
+    - cron: "0 0 * * *" # run stalebot once a day
+
+jobs:
+  stale:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/stale@main
+        id: stale
+        with:
+          stale-issue-message: "This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions."
+          close-issue-message: ""
+          days-before-stale: 30
+          days-before-close: 3
+          exempt-draft-pr: true
+          exempt-issue-labels: "pinned,security"
+          exempt-pr-labels: "pinned,security,dependencies"
+          operations-per-run: 120
+      - name: Print outputs
+        run: echo ${{ join(steps.stale.outputs.*, ',') }}
+
+  # clean_ghcr:
+  #   name: Delete outdated dev container images
+  #   runs-on: ubuntu-latest
+  #   steps:
+  #     - name: Delete old images
+  #       uses: snok/container-retention-policy@v2
+  #       with:
+  #         image-names: dev-*
+  #         cut-off: 60 days ago UTC
+  #         keep-at-least: 5
+  #         account-type: personal
+  #         token: ${{ secrets.GITHUB_TOKEN }}
+  #         token-type: github-token
+

.gitignore

@@ -1,2 +1,20 @@
-*.pyc 
+.DS_Store
+*.pyc
+*.swp
 debug
+.vscode/*
+!.vscode/launch.json
+config/*
+!config/*.example
+models
+*.mp4
+*.db
+*.csv
+frigate/version.py
+web/build
+web/node_modules
+web/coverage
+core
+!/web/**/*.ts
+.idea/*
+.ipynb_checkpoints

.pylintrc

@@ -0,0 +1,588 @@
+[MASTER]
+
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code.
+extension-pkg-whitelist=
+
+# Specify a score threshold to be exceeded before program exits with error.
+fail-under=10.0
+
+# Add files or directories to the blacklist. They should be base names, not
+# paths.
+ignore=CVS
+
+# Add files or directories matching the regex patterns to the blacklist. The
+# regex matches against base names, not paths.
+ignore-patterns=
+
+# Python code to execute, usually for sys.path manipulation such as
+# pygtk.require().
+#init-hook=
+
+# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
+# number of processors available to use.
+jobs=1
+
+# Control the amount of potential inferred values when inferring a single
+# object. This can help the performance when dealing with large functions or
+# complex, nested conditions.
+limit-inference-results=100
+
+# List of plugins (as comma separated values of python module names) to load,
+# usually to register additional checkers.
+load-plugins=
+
+# Pickle collected data for later comparisons.
+persistent=yes
+
+# When enabled, pylint would attempt to guess common misconfiguration and emit
+# user-friendly hints instead of false-positive error messages.
+suggestion-mode=yes
+
+# Allow loading of arbitrary C extensions. Extensions are imported into the
+# active Python interpreter and may run arbitrary code.
+unsafe-load-any-extension=no
+
+
+[MESSAGES CONTROL]
+
+# Only show warnings with the listed confidence levels. Leave empty to show
+# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
+confidence=
+
+# Disable the message, report, category or checker with the given id(s). You
+# can either give multiple identifiers separated by comma (,) or put this
+# option multiple times (only on the command line, not in the configuration
+# file where it should appear only once). You can also use "--disable=all" to
+# disable everything first and then reenable specific checks. For example, if
+# you want to run only the similarities checker, you can use "--disable=all
+# --enable=similarities". If you want to run only the classes checker, but have
+# no Warning level messages displayed, use "--disable=all --enable=classes
+# --disable=W".
+disable=print-statement,
+        parameter-unpacking,
+        unpacking-in-except,
+        old-raise-syntax,
+        backtick,
+        long-suffix,
+        old-ne-operator,
+        old-octal-literal,
+        import-star-module-level,
+        non-ascii-bytes-literal,
+        raw-checker-failed,
+        bad-inline-option,
+        locally-disabled,
+        file-ignored,
+        suppressed-message,
+        useless-suppression,
+        deprecated-pragma,
+        use-symbolic-message-instead,
+        apply-builtin,
+        basestring-builtin,
+        buffer-builtin,
+        cmp-builtin,
+        coerce-builtin,
+        execfile-builtin,
+        file-builtin,
+        long-builtin,
+        raw_input-builtin,
+        reduce-builtin,
+        standarderror-builtin,
+        unicode-builtin,
+        xrange-builtin,
+        coerce-method,
+        delslice-method,
+        getslice-method,
+        setslice-method,
+        no-absolute-import,
+        old-division,
+        dict-iter-method,
+        dict-view-method,
+        next-method-called,
+        metaclass-assignment,
+        indexing-exception,
+        raising-string,
+        reload-builtin,
+        oct-method,
+        hex-method,
+        nonzero-method,
+        cmp-method,
+        input-builtin,
+        round-builtin,
+        intern-builtin,
+        unichr-builtin,
+        map-builtin-not-iterating,
+        zip-builtin-not-iterating,
+        range-builtin-not-iterating,
+        filter-builtin-not-iterating,
+        using-cmp-argument,
+        eq-without-hash,
+        div-method,
+        idiv-method,
+        rdiv-method,
+        exception-message-attribute,
+        invalid-str-codec,
+        sys-max-int,
+        bad-python3-import,
+        deprecated-string-function,
+        deprecated-str-translate-call,
+        deprecated-itertools-function,
+        deprecated-types-field,
+        next-method-defined,
+        dict-items-not-iterating,
+        dict-keys-not-iterating,
+        dict-values-not-iterating,
+        deprecated-operator-function,
+        deprecated-urllib-function,
+        xreadlines-attribute,
+        deprecated-sys-function,
+        exception-escape,
+        comprehension-escape
+
+# Enable the message, report, category or checker with the given id(s). You can
+# either give multiple identifier separated by comma (,) or put this option
+# multiple time (only on the command line, not in the configuration file where
+# it should appear only once). See also the "--disable" option for examples.
+enable=c-extension-no-member
+
+
+[REPORTS]
+
+# Python expression which should return a score less than or equal to 10. You
+# have access to the variables 'error', 'warning', 'refactor', and 'convention'
+# which contain the number of messages in each category, as well as 'statement'
+# which is the total number of statements analyzed. This score is used by the
+# global evaluation report (RP0004).
+evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
+
+# Template used to display messages. This is a python new-style format string
+# used to format the message information. See doc for all details.
+#msg-template=
+
+# Set the output format. Available formats are text, parseable, colorized, json
+# and msvs (visual studio). You can also give a reporter class, e.g.
+# mypackage.mymodule.MyReporterClass.
+output-format=text
+
+# Tells whether to display a full report or only the messages.
+reports=no
+
+# Activate the evaluation score.
+score=yes
+
+
+[REFACTORING]
+
+# Maximum number of nested blocks for function / method body
+max-nested-blocks=5
+
+# Complete name of functions that never returns. When checking for
+# inconsistent-return-statements if a never returning function is called then
+# it will be considered as an explicit return statement and no message will be
+# printed.
+never-returning-functions=sys.exit
+
+
+[SPELLING]
+
+# Limits count of emitted suggestions for spelling mistakes.
+max-spelling-suggestions=4
+
+# Spelling dictionary name. Available dictionaries: none. To make it work,
+# install the python-enchant package.
+spelling-dict=
+
+# List of comma separated words that should not be checked.
+spelling-ignore-words=
+
+# A path to a file that contains the private dictionary; one word per line.
+spelling-private-dict-file=
+
+# Tells whether to store unknown words to the private dictionary (see the
+# --spelling-private-dict-file option) instead of raising a message.
+spelling-store-unknown-words=no
+
+
+[TYPECHECK]
+
+# List of decorators that produce context managers, such as
+# contextlib.contextmanager. Add to this list to register other decorators that
+# produce valid context managers.
+contextmanager-decorators=contextlib.contextmanager
+
+# List of members which are set dynamically and missed by pylint inference
+# system, and so shouldn't trigger E1101 when accessed. Python regular
+# expressions are accepted.
+generated-members=
+
+# Tells whether missing members accessed in mixin class should be ignored. A
+# mixin class is detected if its name ends with "mixin" (case insensitive).
+ignore-mixin-members=yes
+
+# Tells whether to warn about missing members when the owner of the attribute
+# is inferred to be None.
+ignore-none=yes
+
+# This flag controls whether pylint should warn about no-member and similar
+# checks whenever an opaque object is returned when inferring. The inference
+# can return multiple potential results while evaluating a Python object, but
+# some branches might not be evaluated, which results in partial inference. In
+# that case, it might be useful to still emit no-member and other checks for
+# the rest of the inferred objects.
+ignore-on-opaque-inference=yes
+
+# List of class names for which member attributes should not be checked (useful
+# for classes with dynamically set attributes). This supports the use of
+# qualified names.
+ignored-classes=optparse.Values,thread._local,_thread._local
+
+# List of module names for which member attributes should not be checked
+# (useful for modules/projects where namespaces are manipulated during runtime
+# and thus existing member attributes cannot be deduced by static analysis). It
+# supports qualified module names, as well as Unix pattern matching.
+ignored-modules=
+
+# Show a hint with possible names when a member name was not found. The aspect
+# of finding the hint is based on edit distance.
+missing-member-hint=yes
+
+# The minimum edit distance a name should have in order to be considered a
+# similar match for a missing member name.
+missing-member-hint-distance=1
+
+# The total number of similar names that should be taken in consideration when
+# showing a hint for a missing member.
+missing-member-max-choices=1
+
+# List of decorators that change the signature of a decorated function.
+signature-mutators=
+
+
+[STRING]
+
+# This flag controls whether inconsistent-quotes generates a warning when the
+# character used as a quote delimiter is used inconsistently within a module.
+check-quote-consistency=no
+
+# This flag controls whether the implicit-str-concat should generate a warning
+# on implicit string concatenation in sequences defined over several lines.
+check-str-concat-over-line-jumps=no
+
+
+[FORMAT]
+
+# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
+expected-line-ending-format=
+
+# Regexp for a line that is allowed to be longer than the limit.
+ignore-long-lines=^\s*(# )?<?https?://\S+>?$
+
+# Number of spaces of indent required inside a hanging or continued line.
+indent-after-paren=4
+
+# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
+# tab).
+indent-string='    '
+
+# Maximum number of characters on a single line.
+max-line-length=100
+
+# Maximum number of lines in a module.
+max-module-lines=1000
+
+# Allow the body of a class to be on the same line as the declaration if body
+# contains single statement.
+single-line-class-stmt=no
+
+# Allow the body of an if to be on the same line as the test if there is no
+# else.
+single-line-if-stmt=no
+
+
+[SIMILARITIES]
+
+# Ignore comments when computing similarities.
+ignore-comments=yes
+
+# Ignore docstrings when computing similarities.
+ignore-docstrings=yes
+
+# Ignore imports when computing similarities.
+ignore-imports=no
+
+# Minimum lines number of a similarity.
+min-similarity-lines=4
+
+
+[MISCELLANEOUS]
+
+# List of note tags to take in consideration, separated by a comma.
+notes=FIXME,
+      XXX,
+      TODO
+
+# Regular expression of note tags to take in consideration.
+#notes-rgx=
+
+
+[BASIC]
+
+# Naming style matching correct argument names.
+argument-naming-style=snake_case
+
+# Regular expression matching correct argument names. Overrides argument-
+# naming-style.
+#argument-rgx=
+
+# Naming style matching correct attribute names.
+attr-naming-style=snake_case
+
+# Regular expression matching correct attribute names. Overrides attr-naming-
+# style.
+#attr-rgx=
+
+# Bad variable names which should always be refused, separated by a comma.
+bad-names=foo,
+          bar,
+          baz,
+          toto,
+          tutu,
+          tata
+
+# Bad variable names regexes, separated by a comma. If names match any regex,
+# they will always be refused
+bad-names-rgxs=
+
+# Naming style matching correct class attribute names.
+class-attribute-naming-style=any
+
+# Regular expression matching correct class attribute names. Overrides class-
+# attribute-naming-style.
+#class-attribute-rgx=
+
+# Naming style matching correct class names.
+class-naming-style=PascalCase
+
+# Regular expression matching correct class names. Overrides class-naming-
+# style.
+#class-rgx=
+
+# Naming style matching correct constant names.
+const-naming-style=UPPER_CASE
+
+# Regular expression matching correct constant names. Overrides const-naming-
+# style.
+#const-rgx=
+
+# Minimum line length for functions/classes that require docstrings, shorter
+# ones are exempt.
+docstring-min-length=-1
+
+# Naming style matching correct function names.
+function-naming-style=snake_case
+
+# Regular expression matching correct function names. Overrides function-
+# naming-style.
+#function-rgx=
+
+# Good variable names which should always be accepted, separated by a comma.
+good-names=i,
+           j,
+           k,
+           ex,
+           Run,
+           _
+
+# Good variable names regexes, separated by a comma. If names match any regex,
+# they will always be accepted
+good-names-rgxs=
+
+# Include a hint for the correct naming format with invalid-name.
+include-naming-hint=no
+
+# Naming style matching correct inline iteration names.
+inlinevar-naming-style=any
+
+# Regular expression matching correct inline iteration names. Overrides
+# inlinevar-naming-style.
+#inlinevar-rgx=
+
+# Naming style matching correct method names.
+method-naming-style=snake_case
+
+# Regular expression matching correct method names. Overrides method-naming-
+# style.
+#method-rgx=
+
+# Naming style matching correct module names.
+module-naming-style=snake_case
+
+# Regular expression matching correct module names. Overrides module-naming-
+# style.
+#module-rgx=
+
+# Colon-delimited sets of names that determine each other's naming style when
+# the name regexes allow several styles.
+name-group=
+
+# Regular expression which should only match function or class names that do
+# not require a docstring.
+no-docstring-rgx=^_
+
+# List of decorators that produce properties, such as abc.abstractproperty. Add
+# to this list to register other decorators that produce valid properties.
+# These decorators are taken in consideration only for invalid-name.
+property-classes=abc.abstractproperty
+
+# Naming style matching correct variable names.
+variable-naming-style=snake_case
+
+# Regular expression matching correct variable names. Overrides variable-
+# naming-style.
+#variable-rgx=
+
+
+[VARIABLES]
+
+# List of additional names supposed to be defined in builtins. Remember that
+# you should avoid defining new builtins when possible.
+additional-builtins=
+
+# Tells whether unused global variables should be treated as a violation.
+allow-global-unused-variables=yes
+
+# List of strings which can identify a callback function by name. A callback
+# name must start or end with one of those strings.
+callbacks=cb_,
+          _cb
+
+# A regular expression matching the name of dummy variables (i.e. expected to
+# not be used).
+dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
+
+# Argument names that match this expression will be ignored. Default to name
+# with leading underscore.
+ignored-argument-names=_.*|^ignored_|^unused_
+
+# Tells whether we should check for unused import in __init__ files.
+init-import=no
+
+# List of qualified module names which can have objects that can redefine
+# builtins.
+redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io
+
+
+[LOGGING]
+
+# The type of string formatting that logging methods do. `old` means using %
+# formatting, `new` is for `{}` formatting.
+logging-format-style=fstr
+
+# Logging modules to check that the string format arguments are in logging
+# function parameter format.
+logging-modules=logging
+
+
+[DESIGN]
+
+# Maximum number of arguments for function / method.
+max-args=5
+
+# Maximum number of attributes for a class (see R0902).
+max-attributes=7
+
+# Maximum number of boolean expressions in an if statement (see R0916).
+max-bool-expr=5
+
+# Maximum number of branch for function / method body.
+max-branches=12
+
+# Maximum number of locals for function / method body.
+max-locals=15
+
+# Maximum number of parents for a class (see R0901).
+max-parents=7
+
+# Maximum number of public methods for a class (see R0904).
+max-public-methods=20
+
+# Maximum number of return / yield for function / method body.
+max-returns=6
+
+# Maximum number of statements in function / method body.
+max-statements=50
+
+# Minimum number of public methods for a class (see R0903).
+min-public-methods=2
+
+
+[CLASSES]
+
+# List of method names used to declare (i.e. assign) instance attributes.
+defining-attr-methods=__init__,
+                      __new__,
+                      setUp,
+                      __post_init__
+
+# List of member names, which should be excluded from the protected access
+# warning.
+exclude-protected=_asdict,
+                  _fields,
+                  _replace,
+                  _source,
+                  _make
+
+# List of valid names for the first argument in a class method.
+valid-classmethod-first-arg=cls
+
+# List of valid names for the first argument in a metaclass class method.
+valid-metaclass-classmethod-first-arg=cls
+
+
+[IMPORTS]
+
+# List of modules that can be imported at any level, not just the top level
+# one.
+allow-any-import-level=
+
+# Allow wildcard imports from modules that define __all__.
+allow-wildcard-with-all=no
+
+# Analyse import fallback blocks. This can be used to support both Python 2 and
+# 3 compatible code, which means that the block might have code that exists
+# only in one or another interpreter, leading to false positives when analysed.
+analyse-fallback-blocks=no
+
+# Deprecated modules which should not be used, separated by a comma.
+deprecated-modules=optparse,tkinter.tix
+
+# Create a graph of external dependencies in the given file (report RP0402 must
+# not be disabled).
+ext-import-graph=
+
+# Create a graph of every (i.e. internal and external) dependencies in the
+# given file (report RP0402 must not be disabled).
+import-graph=
+
+# Create a graph of internal dependencies in the given file (report RP0402 must
+# not be disabled).
+int-import-graph=
+
+# Force import order to recognize a module as part of the standard
+# compatibility libraries.
+known-standard-library=
+
+# Force import order to recognize a module as part of a third party library.
+known-third-party=enchant
+
+# Couples of modules and preferred modules, separated by a comma.
+preferred-modules=
+
+
+[EXCEPTIONS]
+
+# Exceptions that will emit a warning when being caught. Defaults to
+# "BaseException, Exception".
+overgeneral-exceptions=BaseException,
+                       Exception

.vscode/launch.json

@@ -0,0 +1,12 @@
+{
+  "version": "0.2.0",
+  "configurations": [
+    {
+      "name": "Python: Launch Frigate",
+      "type": "python",
+      "request": "launch",
+      "module": "frigate",
+      "justMyCode": true
+    }
+  ]
+}

CODEOWNERS

@@ -0,0 +1,6 @@
+# Community-supported boards
+/docker/tensorrt/ @madsciencetist @NateMeyer
+/docker/tensorrt/*arm64* @madsciencetist
+/docker/tensorrt/*jetson* @madsciencetist
+/docker/rockchip/ @MarcA711
+/docker/rocm/ @harakas

Dockerfile

@@ -1,90 +0,0 @@
-FROM ubuntu:16.04
-
-# Install system packages
-RUN apt-get -qq update && apt-get -qq install --no-install-recommends -y python3 \ 
- python3-dev \
- python-pil \
- python-lxml \
- python-tk \
- build-essential \
- cmake \ 
- git \ 
- libgtk2.0-dev \ 
- pkg-config \ 
- libavcodec-dev \ 
- libavformat-dev \ 
- libswscale-dev \ 
- libtbb2 \
- libtbb-dev \ 
- libjpeg-dev \
- libpng-dev \
- libtiff-dev \
- libjasper-dev \
- libdc1394-22-dev \
- x11-apps \
- wget \
- vim \
- ffmpeg \
- unzip \
- && rm -rf /var/lib/apt/lists/* 
-
-# Install core packages 
-RUN wget -q -O /tmp/get-pip.py --no-check-certificate https://bootstrap.pypa.io/get-pip.py && python3 /tmp/get-pip.py
-RUN  pip install -U pip \
- numpy \
- matplotlib \
- notebook \
- jupyter \
- pandas \
- moviepy \
- tensorflow \
- keras \
- autovizwidget \
- Flask \
- imutils \
- paho-mqtt
-
-# Install tensorflow models object detection
-RUN GIT_SSL_NO_VERIFY=true git clone -q https://github.com/tensorflow/models /usr/local/lib/python3.5/dist-packages/tensorflow/models
-RUN wget -q -P /usr/local/src/ --no-check-certificate https://github.com/google/protobuf/releases/download/v3.5.1/protobuf-python-3.5.1.tar.gz
-
-# Download & build protobuf-python
-RUN cd /usr/local/src/ \
- && tar xf protobuf-python-3.5.1.tar.gz \
- && rm protobuf-python-3.5.1.tar.gz \
- && cd /usr/local/src/protobuf-3.5.1/ \
- && ./configure \
- && make \
- && make install \
- && ldconfig \
- && rm -rf /usr/local/src/protobuf-3.5.1/
-
-# Add dataframe display widget
-RUN jupyter nbextension enable --py --sys-prefix widgetsnbextension
-
-# Download & build OpenCV
-RUN wget -q -P /usr/local/src/ --no-check-certificate https://github.com/opencv/opencv/archive/4.0.1.zip
-RUN cd /usr/local/src/ \
- && unzip 4.0.1.zip \
- && rm 4.0.1.zip \
- && cd /usr/local/src/opencv-4.0.1/ \
- && mkdir build \
- && cd /usr/local/src/opencv-4.0.1/build \ 
- && cmake -D CMAKE_INSTALL_TYPE=Release -D CMAKE_INSTALL_PREFIX=/usr/local/ .. \
- && make -j4 \
- && make install \
- && rm -rf /usr/local/src/opencv-4.0.1
-
-# Minimize image size 
-RUN (apt-get autoremove -y; \
-     apt-get autoclean -y)
-
-# Set TF object detection available
-ENV PYTHONPATH "$PYTHONPATH:/usr/local/lib/python3.5/dist-packages/tensorflow/models/research:/usr/local/lib/python3.5/dist-packages/tensorflow/models/research/slim"
-RUN cd /usr/local/lib/python3.5/dist-packages/tensorflow/models/research && protoc object_detection/protos/*.proto --python_out=.
-
-WORKDIR /opt/frigate/
-ADD frigate frigate/
-COPY detect_objects.py .
-
-CMD ["python3", "-u", "detect_objects.py"]

LICENSE

@@ -1,661 +1,21 @@
-                    GNU AFFERO GENERAL PUBLIC LICENSE
-                       Version 3, 19 November 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The GNU Affero General Public License is a free, copyleft license for
-software and other kinds of works, specifically designed to ensure
-cooperation with the community in the case of network server software.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-our General Public Licenses are intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
-  Developers that use our General Public Licenses protect your rights
-with two steps: (1) assert copyright on the software, and (2) offer
-you this License which gives you legal permission to copy, distribute
-and/or modify the software.
-
-  A secondary benefit of defending all users' freedom is that
-improvements made in alternate versions of the program, if they
-receive widespread use, become available for other developers to
-incorporate.  Many developers of free software are heartened and
-encouraged by the resulting cooperation.  However, in the case of
-software used on network servers, this result may fail to come about.
-The GNU General Public License permits making a modified version and
-letting the public access it on a server without ever releasing its
-source code to the public.
-
-  The GNU Affero General Public License is designed specifically to
-ensure that, in such cases, the modified source code becomes available
-to the community.  It requires the operator of a network server to
-provide the source code of the modified version running there to the
-users of that server.  Therefore, public use of a modified version, on
-a publicly accessible server, gives the public access to the source
-code of the modified version.
-
-  An older license, called the Affero General Public License and
-published by Affero, was designed to accomplish similar goals.  This is
-a different license, not a version of the Affero GPL, but Affero has
-released a new version of the Affero GPL which permits relicensing under
-this license.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU Affero General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
-  13. Remote Network Interaction; Use with the GNU General Public License.
-
-  Notwithstanding any other provision of this License, if you modify the
-Program, your modified version must prominently offer all users
-interacting with it remotely through a computer network (if your version
-supports such interaction) an opportunity to receive the Corresponding
-Source of your version by providing access to the Corresponding Source
-from a network server at no charge, through some standard or customary
-means of facilitating copying of software.  This Corresponding Source
-shall include the Corresponding Source for any work covered by version 3
-of the GNU General Public License that is incorporated pursuant to the
-following paragraph.
-
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the work with which it is combined will remain governed by version
-3 of the GNU General Public License.
-
-  14. Revised Versions of this License.
-
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU Affero General Public License from time to time.  Such new versions
-will be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU Affero General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU Affero General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
-  If the Program specifies that a proxy can decide which future
-versions of the GNU Affero General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
-  15. Disclaimer of Warranty.
-
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU Affero General Public License as published
-    by the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU Affero General Public License for more details.
-
-    You should have received a copy of the GNU Affero General Public License
-    along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If your software can interact with users remotely through a computer
-network, you should also make sure that it provides a way for users to
-get its source.  For example, if your program is a web application, its
-interface could display a "Source" link that leads users to an archive
-of the code.  There are many ways you could offer source, and different
-solutions will be better for different programs; see section 13 for the
-specific requirements.
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU AGPL, see
-<https://www.gnu.org/licenses/>.
+The MIT License
+
+Copyright (c) 2020 Blake Blackshear
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

Makefile

@@ -0,0 +1,42 @@
+default_target: local
+
+COMMIT_HASH := $(shell git log -1 --pretty=format:"%h"|tail -1)
+VERSION = 0.14.1
+IMAGE_REPO ?= ghcr.io/blakeblackshear/frigate
+GITHUB_REF_NAME ?= $(shell git rev-parse --abbrev-ref HEAD)
+CURRENT_UID := $(shell id -u)
+CURRENT_GID := $(shell id -g)
+BOARDS= #Initialized empty
+
+include docker/*/*.mk
+
+build-boards: $(BOARDS:%=build-%)
+
+push-boards: $(BOARDS:%=push-%)
+
+version:
+	echo 'VERSION = "$(VERSION)-$(COMMIT_HASH)"' > frigate/version.py
+
+local: version
+	docker buildx build --target=frigate --tag frigate:latest --load --file docker/main/Dockerfile .
+
+amd64:
+	docker buildx build --platform linux/amd64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/main/Dockerfile .
+
+arm64:
+	docker buildx build --platform linux/arm64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/main/Dockerfile .
+
+build: version amd64 arm64
+	docker buildx build --platform linux/arm64/v8,linux/amd64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/main/Dockerfile .
+
+push: push-boards
+	docker buildx build --push --platform linux/arm64/v8,linux/amd64 --target=frigate --tag $(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH) --file docker/main/Dockerfile .
+
+run: local
+	docker run --rm --publish=5000:5000 --volume=${PWD}/config:/config frigate:latest
+
+run_tests: local
+	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest python3 -u -m unittest
+	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest python3 -u -m mypy --config-file frigate/mypy.ini frigate
+
+.PHONY: run_tests

README.md

@@ -1,147 +1,50 @@
-# Frigate - Realtime Object Detection for RTSP Cameras
-Uses OpenCV and Tensorflow to perform realtime object detection locally for RTSP cameras. Designed for integration with HomeAssistant or others via MQTT.
+<p align="center">
+  <img align="center" alt="logo" src="docs/static/img/frigate.png">
+</p>
 
-- Leverages multiprocessing and threads heavily with an emphasis on realtime over processing every frame
-- Allows you to define specific regions (squares) in the image to look for motion/objects
-- Motion detection runs in a separate process per region and signals to object detection to avoid wasting CPU cycles looking for objects when there is no motion
-- Object detection with Tensorflow runs in a separate process per region
-- Detected objects are placed on a shared mp.Queue and aggregated into a list of recently detected objects in a separate thread
-- A person score is calculated as the sum of all scores/5
-- Motion and object info is published over MQTT for integration into HomeAssistant or others
-- An endpoint is available to view an MJPEG stream for debugging
+# Frigate - NVR With Realtime Object Detection for IP Cameras
 
-![Diagram](diagram.png)
+A complete and local NVR designed for [Home Assistant](https://www.home-assistant.io) with AI object detection. Uses OpenCV and Tensorflow to perform realtime object detection locally for IP cameras.
 
-## Example video
-You see multiple bounding boxes because it draws bounding boxes from all frames in the past 1 second where a person was detected. Not all of the bounding boxes were from the current frame.
-[![](http://img.youtube.com/vi/nqHbCtyo4dY/0.jpg)](http://www.youtube.com/watch?v=nqHbCtyo4dY "Frigate")
+Use of a [Google Coral Accelerator](https://coral.ai/products/) is optional, but highly recommended. The Coral will outperform even the best CPUs and can process 100+ FPS with very little overhead.
 
-## Getting Started
-Build the container with
-```
-docker build -t frigate .
-```
+- Tight integration with Home Assistant via a [custom component](https://github.com/blakeblackshear/frigate-hass-integration)
+- Designed to minimize resource use and maximize performance by only looking for objects when and where it is necessary
+- Leverages multiprocessing heavily with an emphasis on realtime over processing every frame
+- Uses a very low overhead motion detection to determine where to run object detection
+- Object detection with TensorFlow runs in separate processes for maximum FPS
+- Communicates over MQTT for easy integration into other systems
+- Records video with retention settings based on detected objects
+- 24/7 recording
+- Re-streaming via RTSP to reduce the number of connections to your camera
+- WebRTC & MSE support for low-latency live view
 
-Download a model from the [zoo](https://github.com/tensorflow/models/blob/master/research/object_detection/g3doc/detection_model_zoo.md).
+## Documentation
 
-Download the cooresponding label map from [here](https://github.com/tensorflow/models/tree/master/research/object_detection/data).
+View the documentation at https://docs.frigate.video
 
-Run the container with
-```
-docker run --rm \
--v <path_to_frozen_detection_graph.pb>:/frozen_inference_graph.pb:ro \
--v <path_to_labelmap.pbtext>:/label_map.pbtext:ro \
--v <path_to_config_dir>:/config:ro \
--p 5000:5000 \
--e RTSP_URL='<rtsp_url>' \
--e REGIONS='<box_size_1>,<x_offset_1>,<y_offset_1>,<min_person_size_1>,<min_motion_size_1>,<mask_file_1>:<box_size_2>,<x_offset_2>,<y_offset_2>,<min_person_size_2>,<min_motion_size_2>,<mask_file_2>' \
--e MQTT_HOST='your.mqtthost.com' \
--e MQTT_USER='username' \
--e MQTT_PASS='password' \
--e MQTT_TOPIC_PREFIX='cameras/1' \
--e DEBUG='0' \
-frigate:latest
-```
+## Donations
 
-Example docker-compose:
-```
-  frigate:
-    container_name: frigate
-    restart: unless-stopped
-    image: frigate:latest
-    volumes:
-      - <path_to_frozen_detection_graph.pb>:/frozen_inference_graph.pb:ro
-      - <path_to_labelmap.pbtext>:/label_map.pbtext:ro
-      - <path_to_config>:/config
-    ports:
-      - "127.0.0.1:5000:5000"
-    environment:
-      RTSP_URL: "<rtsp_url>"
-      REGIONS: "<box_size_1>,<x_offset_1>,<y_offset_1>,<min_person_size_1>,<min_motion_size_1>,<mask_file_1>:<box_size_2>,<x_offset_2>,<y_offset_2>,<min_person_size_2>,<min_motion_size_2>,<mask_file_2>"
-      MQTT_HOST: "your.mqtthost.com"
-      MQTT_USER: "username" #optional
-      MQTT_PASS: "password" #optional
-      MQTT_TOPIC_PREFIX: "cameras/1"
-      DEBUG: "0"
-```
+If you would like to make a donation to support development, please use [Github Sponsors](https://github.com/sponsors/blakeblackshear).
 
-Here is an example `REGIONS` env variable:
-`350,0,300,5000,200,mask-0-300.bmp:400,350,250,2000,200,mask-350-250.bmp:400,750,250,2000,200,mask-750-250.bmp`
+## Screenshots
 
-First region broken down (all are required):
-- `350` - size of the square (350px by 350px)
-- `0` - x coordinate of upper left corner (top left of image is 0,0)
-- `300` - y coordinate of upper left corner (top left of image is 0,0)
-- `5000` - minimum person bounding box size (width*height for bounding box of identified person)
-- `200` - minimum number of changed pixels to trigger motion
-- `mask-0-300.bmp` - a bmp file with the masked regions as pure black, must be the same size as the region
+### Live dashboard
+<div>
+<img width="800" alt="Live dashboard" src="https://github.com/blakeblackshear/frigate/assets/569905/5e713cb9-9db5-41dc-947a-6937c3bc376e">
+</div>
 
-Mask files go in the `/config` directory.
+### Streamlined review workflow
+<div>
+<img width="800" alt="Streamlined review workflow" src="https://github.com/blakeblackshear/frigate/assets/569905/6fed96e8-3b18-40e5-9ddc-31e6f3c9f2ff">
+</div>
 
-Access the mjpeg stream at http://localhost:5000
+### Multi-camera scrubbing
+<div>
+<img width="800" alt="Multi-camera scrubbing" src="https://github.com/blakeblackshear/frigate/assets/569905/d6788a15-0eeb-4427-a8d4-80b93cae3d74">
+</div>
 
-## Integration with HomeAssistant
-```
-camera:
-  - name: Camera Last Person
-    platform: generic
-    still_image_url: http://<ip>:5000/best_person.jpg
-
-binary_sensor:
-  - name: Camera Motion
-    platform: mqtt
-    state_topic: "cameras/1/motion"
-    device_class: motion
-    availability_topic: "cameras/1/available"
-
-sensor:
-  - name: Camera Person Score
-    platform: mqtt
-    state_topic: "cameras/1/objects"
-    value_template: '{{ value_json.person }}'
-    unit_of_measurement: '%'
-    availability_topic: "cameras/1/available"
-```
-
-## Tips
-- Lower the framerate of the RTSP feed on the camera to reduce the CPU usage for capturing the feed
-- Use SSDLite models to reduce CPU usage
-
-## Future improvements
-- [ ] Build tensorflow from source for CPU optimizations
-- [ ] Add ability to turn detection on and off via MQTT
-- [ ] MQTT motion occasionally gets stuck ON
-- [ ] Output movie clips of people for notifications, etc.
-- [ ] Integrate with homeassistant push camera
-- [ ] Merge bounding boxes that span multiple regions
-- [ ] Switch to a config file
-- [ ] Allow motion regions to be different than object detection regions
-- [ ] Implement mode to save labeled objects for training
-- [ ] Try and reduce CPU usage by simplifying the tensorflow model to just include the objects we care about
-- [ ] Look into GPU accelerated decoding of RTSP stream
-- [ ] Send video over a socket and use JSMPEG
-- [ ] Look into neural compute stick
-
-## Building Tensorflow from source for CPU optimizations
-https://www.tensorflow.org/install/source#docker_linux_builds
-used `tensorflow/tensorflow:1.12.0-devel-py3`
-
-## Optimizing the graph (cant say I saw much difference in CPU usage)
-https://github.com/tensorflow/tensorflow/blob/master/tensorflow/tools/graph_transforms/README.md#optimizing-for-deployment
-```
-docker run -it -v ${PWD}:/lab -v ${PWD}/../back_camera_model/models/ssd_mobilenet_v2_coco_2018_03_29/frozen_inference_graph.pb:/frozen_inference_graph.pb:ro tensorflow/tensorflow:1.12.0-devel-py3 bash
-
-bazel build tensorflow/tools/graph_transforms:transform_graph
-
-bazel-bin/tensorflow/tools/graph_transforms/transform_graph \
---in_graph=/frozen_inference_graph.pb \
---out_graph=/lab/optimized_inception_graph.pb \
---inputs='image_tensor' \
---outputs='num_detections,detection_scores,detection_boxes,detection_classes' \
---transforms='
-  strip_unused_nodes(type=float, shape="1,300,300,3")
-  remove_nodes(op=Identity, op=CheckNumerics)
-  fold_constants(ignore_errors=true)
-  fold_batch_norms
-  fold_old_batch_norms'
-```
+### Built-in mask and zone editor
+<div>
+<img width="800" alt="Multi-camera scrubbing" src="https://github.com/blakeblackshear/frigate/assets/569905/d7885fc3-bfe6-452f-b7d0-d957cb3e31f5">
+</div>

audio-labelmap.txt

@@ -0,0 +1,521 @@
+speech
+speech
+speech
+speech
+babbling
+speech
+yell
+bellow
+whoop
+yell
+yell
+yell
+whispering
+laughter
+laughter
+laughter
+snicker
+laughter
+laughter
+crying
+crying
+crying
+yell
+sigh
+singing
+choir
+sodeling
+chant
+mantra
+child_singing
+synthetic_singing
+rapping
+humming
+groan
+grunt
+whistling
+breathing
+wheeze
+snoring
+gasp
+pant
+snort
+cough
+throat_clearing
+sneeze
+sniff
+run
+shuffle
+footsteps
+chewing
+biting
+gargling
+stomach_rumble
+burping
+hiccup
+fart
+hands
+finger_snapping
+clapping
+heartbeat
+heart_murmur
+cheering
+applause
+chatter
+crowd
+speech
+children_playing
+animal
+pets
+dog
+bark
+yip
+howl
+bow-wow
+growling
+whimper_dog
+cat
+purr
+meow
+hiss
+caterwaul
+livestock
+horse
+clip-clop
+neigh
+cattle
+moo
+cowbell
+pig
+oink
+goat
+bleat
+sheep
+fowl
+chicken
+cluck
+cock-a-doodle-doo
+turkey
+gobble
+duck
+quack
+goose
+honk
+wild_animals
+roaring_cats
+roar
+bird
+chird
+chirp
+squawk
+pigeon
+coo
+crow
+caw
+owl
+hoot
+flapping_wings
+dogs
+rats
+mouse
+patter
+insect
+cricket
+mosquito
+fly
+buzz
+buzz
+frog
+croak
+snake
+rattle
+whale_vocalization
+music
+musical_instrument
+plucked_string_instrument
+guitar
+electric_guitar
+bass_guitar
+acoustic_guitar
+steel_guitar
+tapping
+strum
+banjo
+sitar
+mandolin
+zither
+ukulele
+keyboard
+piano
+electric_piano
+organ
+electronic_organ
+hammond_organ
+synthesizer
+sampler
+harpsichord
+percussion
+drum_kit
+drum_machine
+drum
+snare_drum
+rimshot
+drum_roll
+bass_drum
+timpani
+tabla
+cymbal
+hi-hat
+wood_block
+tambourine
+rattle
+maraca
+gong
+tubular_bells
+mallet_percussion
+marimba
+glockenspiel
+vibraphone
+steelpan
+orchestra
+brass_instrument
+french_horn
+trumpet
+trombone
+bowed_string_instrument
+string_section
+violin
+pizzicato
+cello
+double_bass
+wind_instrument
+flute
+saxophone
+clarinet
+harp
+bell
+church_bell
+jingle_bell
+bicycle_bell
+tuning_fork
+chime
+wind_chime
+change_ringing
+harmonica
+accordion
+bagpipes
+didgeridoo
+shofar
+theremin
+singing_bowl
+scratching
+pop_music
+hip_hop_music
+beatboxing
+rock_music
+heavy_metal
+punk_rock
+grunge
+progressive_rock
+rock_and_roll
+psychedelic_rock
+rhythm_and_blues
+soul_music
+reggae
+country
+swing_music
+bluegrass
+funk
+folk_music
+middle_eastern_music
+jazz
+disco
+classical_music
+opera
+electronic_music
+house_music
+techno
+dubstep
+drum_and_bass
+electronica
+electronic_dance_music
+ambient_music
+trance_music
+music_of_latin_america
+salsa_music
+flamenco
+blues
+music_for_children
+new-age_music
+vocal_music
+a_capella
+music_of_africa
+afrobeat
+christian_music
+gospel_music
+music_of_asia
+carnatic_music
+music_of_bollywood
+ska
+traditional_music
+independent_music
+song
+background_music
+theme_music
+jingle
+soundtrack_music
+lullaby
+video_game_music
+christmas_music
+dance_music
+wedding_music
+happy_music
+sad_music
+tender_music
+exciting_music
+angry_music
+scary_music
+wind
+rustling_leaves
+wind_noise
+thunderstorm
+thunder
+water
+rain
+raindrop
+rain_on_surface
+stream
+waterfall
+ocean
+waves
+steam
+gurgling
+fire
+crackle
+vehicle
+boat
+sailboat
+rowboat
+motorboat
+ship
+motor_vehicle
+car
+honk
+toot
+car_alarm
+power_windows
+skidding
+tire_squeal
+car_passing_by
+race_car
+truck
+air_brake
+air_horn
+reversing_beeps
+ice_cream_truck
+bus
+emergency_vehicle
+police_car
+ambulance
+fire_engine
+motorcycle
+traffic_noise
+rail_transport
+train
+train_whistle
+train_horn
+railroad_car
+train_wheels_squealing
+subway
+aircraft
+aircraft_engine
+jet_engine
+propeller
+helicopter
+fixed-wing_aircraft
+bicycle
+skateboard
+engine
+light_engine
+dental_drill's_drill
+lawn_mower
+chainsaw
+medium_engine
+heavy_engine
+engine_knocking
+engine_starting
+idling
+accelerating
+door
+doorbell
+ding-dong
+sliding_door
+slam
+knock
+tap
+squeak
+cupboard_open_or_close
+drawer_open_or_close
+dishes
+cutlery
+chopping
+frying
+microwave_oven
+blender
+water_tap
+sink
+bathtub
+hair_dryer
+toilet_flush
+toothbrush
+electric_toothbrush
+vacuum_cleaner
+zipper
+keys_jangling
+coin
+scissors
+electric_shaver
+shuffling_cards
+typing
+typewriter
+computer_keyboard
+writing
+alarm
+telephone
+telephone_bell_ringing
+ringtone
+telephone_dialing
+dial_tone
+busy_signal
+alarm_clock
+siren
+civil_defense_siren
+buzzer
+smoke_detector
+fire_alarm
+foghorn
+whistle
+steam_whistle
+mechanisms
+ratchet
+clock
+tick
+tick-tock
+gears
+pulleys
+sewing_machine
+mechanical_fan
+air_conditioning
+cash_register
+printer
+camera
+single-lens_reflex_camera
+tools
+hammer
+jackhammer
+sawing
+filing
+sanding
+power_tool
+drill
+explosion
+gunshot
+machine_gun
+fusillade
+artillery_fire
+cap_gun
+fireworks
+firecracker
+burst
+eruption
+boom
+wood
+chop
+splinter
+crack
+glass
+chink
+shatter
+liquid
+splash
+slosh
+squish
+drip
+pour
+trickle
+gush
+fill
+spray
+pump
+stir
+boiling
+sonar
+arrow
+whoosh
+thump
+thunk
+electronic_tuner
+effects_unit
+chorus_effect
+basketball_bounce
+bang
+slap
+whack
+smash
+breaking
+bouncing
+whip
+flap
+scratch
+scrape
+rub
+roll
+crushing
+crumpling
+tearing
+beep
+ping
+ding
+clang
+squeal
+creak
+rustle
+whir
+clatter
+sizzle
+clicking
+clickety-clack
+rumble
+plop
+jingle
+hum
+zing
+boing
+crunch
+silence
+sine_wave
+harmonic
+chirp_tone
+sound_effect
+pulse
+inside
+inside
+inside
+outside
+outside
+reverberation
+echo
+noise
+environmental_noise
+static
+mains_hum
+distortion
+sidetone
+cacophony
+white_noise
+pink_noise
+throbbing
+vibration
+television
+radio
+field_recording

benchmark.py

@@ -0,0 +1,108 @@
+import datetime
+import multiprocessing as mp
+from statistics import mean
+
+import numpy as np
+
+from frigate.config import DetectorTypeEnum
+from frigate.object_detection import (
+    ObjectDetectProcess,
+    RemoteObjectDetector,
+    load_labels,
+)
+
+my_frame = np.expand_dims(np.full((300, 300, 3), 1, np.uint8), axis=0)
+labels = load_labels("/labelmap.txt")
+
+######
+# Minimal same process runner
+######
+# object_detector = LocalObjectDetector()
+# tensor_input = np.expand_dims(np.full((300,300,3), 0, np.uint8), axis=0)
+
+# start = datetime.datetime.now().timestamp()
+
+# frame_times = []
+# for x in range(0, 1000):
+#   start_frame = datetime.datetime.now().timestamp()
+
+#   tensor_input[:] = my_frame
+#   detections = object_detector.detect_raw(tensor_input)
+#   parsed_detections = []
+#   for d in detections:
+#       if d[1] < 0.4:
+#           break
+#       parsed_detections.append((
+#           labels[int(d[0])],
+#           float(d[1]),
+#           (d[2], d[3], d[4], d[5])
+#       ))
+#   frame_times.append(datetime.datetime.now().timestamp()-start_frame)
+
+# duration = datetime.datetime.now().timestamp()-start
+# print(f"Processed for {duration:.2f} seconds.")
+# print(f"Average frame processing time: {mean(frame_times)*1000:.2f}ms")
+
+
+def start(id, num_detections, detection_queue, event):
+    object_detector = RemoteObjectDetector(
+        str(id), "/labelmap.txt", detection_queue, event
+    )
+    start = datetime.datetime.now().timestamp()
+
+    frame_times = []
+    for x in range(0, num_detections):
+        start_frame = datetime.datetime.now().timestamp()
+        object_detector.detect(my_frame)
+        frame_times.append(datetime.datetime.now().timestamp() - start_frame)
+
+    duration = datetime.datetime.now().timestamp() - start
+    object_detector.cleanup()
+    print(f"{id} - Processed for {duration:.2f} seconds.")
+    print(f"{id} - FPS: {object_detector.fps.eps():.2f}")
+    print(f"{id} - Average frame processing time: {mean(frame_times)*1000:.2f}ms")
+
+
+######
+# Separate process runner
+######
+# event = mp.Event()
+# detection_queue = mp.Queue()
+# edgetpu_process = EdgeTPUProcess(detection_queue, {'1': event}, 'usb:0')
+
+# start(1, 1000, edgetpu_process.detection_queue, event)
+# print(f"Average raw inference speed: {edgetpu_process.avg_inference_speed.value*1000:.2f}ms")
+
+####
+# Multiple camera processes
+####
+camera_processes = []
+
+events = {}
+for x in range(0, 10):
+    events[str(x)] = mp.Event()
+detection_queue = mp.Queue()
+edgetpu_process_1 = ObjectDetectProcess(
+    detection_queue, events, DetectorTypeEnum.edgetpu, "usb:0"
+)
+edgetpu_process_2 = ObjectDetectProcess(
+    detection_queue, events, DetectorTypeEnum.edgetpu, "usb:1"
+)
+
+for x in range(0, 10):
+    camera_process = mp.Process(
+        target=start, args=(x, 300, detection_queue, events[str(x)])
+    )
+    camera_process.daemon = True
+    camera_processes.append(camera_process)
+
+start_time = datetime.datetime.now().timestamp()
+
+for p in camera_processes:
+    p.start()
+
+for p in camera_processes:
+    p.join()
+
+duration = datetime.datetime.now().timestamp() - start_time
+print(f"Total - Processed for {duration:.2f} seconds.")

benchmark_motion.py

@@ -0,0 +1,118 @@
+import datetime
+import multiprocessing as mp
+import os
+
+import cv2
+import numpy as np
+
+from frigate.config import MotionConfig
+from frigate.motion.improved_motion import ImprovedMotionDetector
+from frigate.util import create_mask
+
+# get info on the video
+# cap = cv2.VideoCapture("debug/front_cam_2023_05_23_08_41__2023_05_23_08_43.mp4")
+# cap = cv2.VideoCapture("debug/motion_test_clips/rain_1.mp4")
+cap = cv2.VideoCapture("debug/motion_test_clips/lawn_mower_night_1.mp4")
+# cap = cv2.VideoCapture("airport.mp4")
+width = int(cap.get(cv2.CAP_PROP_FRAME_WIDTH))
+height = int(cap.get(cv2.CAP_PROP_FRAME_HEIGHT))
+fps = cap.get(cv2.CAP_PROP_FPS)
+frame_shape = (height, width, 3)
+# Nick back:
+# "1280,0,1280,316,1170,216,1146,126,1016,127,979,82,839,0",
+# "310,350,300,402,224,405,241,354",
+# "378,0,375,26,0,23,0,0",
+# Front door:
+# "1080,0,1080,339,1010,280,1020,169,777,163,452,170,318,299,191,365,186,417,139,470,108,516,40,530,0,514,0,0",
+# "336,833,438,1024,346,1093,103,1052,24,814",
+# Back
+# "1855,0,1851,100,1289,96,1105,161,1045,119,890,121,890,0",
+# "505,95,506,138,388,153,384,114",
+# "689,72,689,122,549,134,547,89",
+# "261,134,264,176,169,195,167,158",
+# "145,159,146,202,70,220,65,183",
+
+mask = create_mask(
+    (height, width),
+    [
+        "1080,0,1080,339,1010,280,1020,169,777,163,452,170,318,299,191,365,186,417,139,470,108,516,40,530,0,514,0,0",
+        "336,833,438,1024,346,1093,103,1052,24,814",
+    ],
+)
+
+# create the motion config
+motion_config_1 = MotionConfig()
+motion_config_1.mask = np.zeros((height, width), np.uint8)
+motion_config_1.mask[:] = mask
+# motion_config_1.improve_contrast = 1
+motion_config_1.frame_height = 150
+# motion_config_1.frame_alpha = 0.02
+# motion_config_1.threshold = 30
+# motion_config_1.contour_area = 10
+
+motion_config_2 = MotionConfig()
+motion_config_2.mask = np.zeros((height, width), np.uint8)
+motion_config_2.mask[:] = mask
+# motion_config_2.improve_contrast = 1
+motion_config_2.frame_height = 150
+# motion_config_2.frame_alpha = 0.01
+motion_config_2.threshold = 20
+# motion_config.contour_area = 10
+
+save_images = True
+
+improved_motion_detector_1 = ImprovedMotionDetector(
+    frame_shape=frame_shape,
+    config=motion_config_1,
+    fps=fps,
+    improve_contrast=mp.Value("i", motion_config_1.improve_contrast),
+    threshold=mp.Value("i", motion_config_1.threshold),
+    contour_area=mp.Value("i", motion_config_1.contour_area),
+    name="default",
+)
+improved_motion_detector_1.save_images = save_images
+
+improved_motion_detector_2 = ImprovedMotionDetector(
+    frame_shape=frame_shape,
+    config=motion_config_2,
+    fps=fps,
+    improve_contrast=mp.Value("i", motion_config_2.improve_contrast),
+    threshold=mp.Value("i", motion_config_2.threshold),
+    contour_area=mp.Value("i", motion_config_2.contour_area),
+    name="compare",
+)
+improved_motion_detector_2.save_images = save_images
+
+# read and process frames
+ret, frame = cap.read()
+frame_counter = 1
+while ret:
+    yuv_frame = cv2.cvtColor(frame, cv2.COLOR_BGR2YUV_I420)
+
+    start_frame = datetime.datetime.now().timestamp()
+    improved_motion_detector_1.detect(yuv_frame)
+
+    start_frame = datetime.datetime.now().timestamp()
+    improved_motion_detector_2.detect(yuv_frame)
+
+    default_frame = f"debug/frames/default-{frame_counter}.jpg"
+    compare_frame = f"debug/frames/compare-{frame_counter}.jpg"
+    if os.path.exists(default_frame) and os.path.exists(compare_frame):
+        images = [
+            cv2.imread(default_frame),
+            cv2.imread(compare_frame),
+        ]
+
+        cv2.imwrite(
+            f"debug/frames/all-{frame_counter}.jpg",
+            cv2.vconcat(images)
+            if frame_shape[0] > frame_shape[1]
+            else cv2.hconcat(images),
+        )
+        os.unlink(default_frame)
+        os.unlink(compare_frame)
+    frame_counter += 1
+
+    ret, frame = cap.read()
+
+cap.release()

config/config.yml.example

@@ -0,0 +1,16 @@
+mqtt:
+  host: mqtt
+
+cameras:
+  test:
+    ffmpeg:
+      inputs:
+        - path: /media/frigate/car-stopping.mp4
+          input_args: -re -stream_loop -1 -fflags +genpts
+          roles:
+            - detect
+            - rtmp
+    detect:
+      height: 1080
+      width: 1920
+      fps: 5

cspell.json

@@ -0,0 +1,21 @@
+{
+  "version": "0.2",
+  "ignorePaths": [
+    "Dockerfile",
+    "Dockerfile.*",
+    "CMakeLists.txt",
+    "*.db",
+    "node_modules",
+    "__pycache__",
+    "dist"
+  ],
+  "language": "en",
+  "dictionaryDefinitions": [
+    {
+      "name": "frigate-dictionary",
+      "path": "./.cspell/frigate-dictionary.txt",
+      "addWords": true
+    }
+  ],
+  "dictionaries": ["frigate-dictionary"]
+}

detect_objects.py

@@ -1,247 +0,0 @@
-import os
-import cv2
-import imutils
-import time
-import datetime
-import ctypes
-import logging
-import multiprocessing as mp
-import threading
-import json
-from contextlib import closing
-import numpy as np
-from object_detection.utils import visualization_utils as vis_util
-from flask import Flask, Response, make_response, send_file
-import paho.mqtt.client as mqtt
-
-from frigate.util import tonumpyarray
-from frigate.mqtt import MqttMotionPublisher, MqttObjectPublisher
-from frigate.objects import ObjectParser, ObjectCleaner, BestPersonFrame
-from frigate.motion import detect_motion
-from frigate.video import fetch_frames, FrameTracker
-from frigate.object_detection import detect_objects
-
-RTSP_URL = os.getenv('RTSP_URL')
-
-MQTT_HOST = os.getenv('MQTT_HOST')
-MQTT_USER = os.getenv('MQTT_USER')
-MQTT_PASS = os.getenv('MQTT_PASS')
-MQTT_TOPIC_PREFIX = os.getenv('MQTT_TOPIC_PREFIX')
-
-# REGIONS = "350,0,300,50:400,350,250,50:400,750,250,50"
-# REGIONS = "400,350,250,50"
-REGIONS = os.getenv('REGIONS')
-
-DEBUG = (os.getenv('DEBUG') == '1')
-
-def main():
-    DETECTED_OBJECTS = []
-    recent_motion_frames = {}
-    # Parse selected regions
-    regions = []
-    for region_string in REGIONS.split(':'):
-        region_parts = region_string.split(',')
-        region_mask_image = cv2.imread("/config/{}".format(region_parts[5]), cv2.IMREAD_GRAYSCALE)
-        region_mask = np.where(region_mask_image==[0])
-        regions.append({
-            'size': int(region_parts[0]),
-            'x_offset': int(region_parts[1]),
-            'y_offset': int(region_parts[2]),
-            'min_person_area': int(region_parts[3]),
-            'min_object_size': int(region_parts[4]),
-            'mask': region_mask,
-            # Event for motion detection signaling
-            'motion_detected': mp.Event(),
-            # create shared array for storing 10 detected objects
-            # note: this must be a double even though the value you are storing
-            #       is a float. otherwise it stops updating the value in shared
-            #       memory. probably something to do with the size of the memory block
-            'output_array': mp.Array(ctypes.c_double, 6*10)
-        })
-    # capture a single frame and check the frame shape so the correct array
-    # size can be allocated in memory
-    video = cv2.VideoCapture(RTSP_URL)
-    ret, frame = video.read()
-    if ret:
-        frame_shape = frame.shape
-    else:
-        print("Unable to capture video stream")
-        exit(1)
-    video.release()
-        
-    # compute the flattened array length from the array shape
-    flat_array_length = frame_shape[0] * frame_shape[1] * frame_shape[2]
-    # create shared array for storing the full frame image data
-    shared_arr = mp.Array(ctypes.c_uint16, flat_array_length)
-    # create shared value for storing the frame_time
-    shared_frame_time = mp.Value('d', 0.0)
-    # Lock to control access to the frame
-    frame_lock = mp.Lock()
-    # Condition for notifying that a new frame is ready
-    frame_ready = mp.Condition()
-    # Condition for notifying that motion status changed globally
-    motion_changed = mp.Condition()
-    # Condition for notifying that objects were parsed
-    objects_parsed = mp.Condition()
-    # Queue for detected objects
-    object_queue = mp.Queue()
-
-    # shape current frame so it can be treated as an image
-    frame_arr = tonumpyarray(shared_arr).reshape(frame_shape)
-
-    # start the process to capture frames from the RTSP stream and store in a shared array
-    capture_process = mp.Process(target=fetch_frames, args=(shared_arr, 
-        shared_frame_time, frame_lock, frame_ready, frame_shape, RTSP_URL))
-    capture_process.daemon = True
-
-    # for each region, start a separate process for motion detection and object detection
-    detection_processes = []
-    motion_processes = []
-    for region in regions:
-        detection_process = mp.Process(target=detect_objects, args=(shared_arr, 
-            object_queue,
-            shared_frame_time,
-            frame_lock, frame_ready,
-            region['motion_detected'],
-            frame_shape, 
-            region['size'], region['x_offset'], region['y_offset'],
-            region['min_person_area'],
-            DEBUG))
-        detection_process.daemon = True
-        detection_processes.append(detection_process)
-
-        motion_process = mp.Process(target=detect_motion, args=(shared_arr,
-            shared_frame_time,
-            frame_lock, frame_ready,
-            region['motion_detected'],
-            motion_changed,
-            frame_shape, 
-            region['size'], region['x_offset'], region['y_offset'],
-            region['min_object_size'], region['mask'],
-            DEBUG))
-        motion_process.daemon = True
-        motion_processes.append(motion_process)
-
-    # start a thread to store recent motion frames for processing
-    frame_tracker = FrameTracker(frame_arr, shared_frame_time, frame_ready, frame_lock, 
-        recent_motion_frames, motion_changed, [region['motion_detected'] for region in regions])
-    frame_tracker.start()
-
-    # start a thread to store the highest scoring recent person frame
-    best_person_frame = BestPersonFrame(objects_parsed, recent_motion_frames, DETECTED_OBJECTS, 
-        motion_changed, [region['motion_detected'] for region in regions])
-    best_person_frame.start()
-
-    # start a thread to parse objects from the queue
-    object_parser = ObjectParser(object_queue, objects_parsed, DETECTED_OBJECTS)
-    object_parser.start()
-    # start a thread to expire objects from the detected objects list
-    object_cleaner = ObjectCleaner(objects_parsed, DETECTED_OBJECTS)
-    object_cleaner.start()
-
-    # connect to mqtt and setup last will
-    def on_connect(client, userdata, flags, rc): 
-        print("On connect called")
-        # publish a message to signal that the service is running
-        client.publish(MQTT_TOPIC_PREFIX+'/available', 'online', retain=True)
-    client = mqtt.Client()
-    client.on_connect = on_connect
-    client.will_set(MQTT_TOPIC_PREFIX+'/available', payload='offline', qos=1, retain=True)
-    if not MQTT_USER is None:
-        client.username_pw_set(MQTT_USER, password=MQTT_PASS)
-
-    client.connect(MQTT_HOST, 1883, 60)
-    client.loop_start()
-
-    # start a thread to publish object scores (currently only person)
-    mqtt_publisher = MqttObjectPublisher(client, MQTT_TOPIC_PREFIX, objects_parsed, DETECTED_OBJECTS)
-    mqtt_publisher.start()
-
-    # start thread to publish motion status
-    mqtt_motion_publisher = MqttMotionPublisher(client, MQTT_TOPIC_PREFIX, motion_changed,
-        [region['motion_detected'] for region in regions])
-    mqtt_motion_publisher.start()
-
-    # start the process of capturing frames
-    capture_process.start()
-    print("capture_process pid ", capture_process.pid)
-
-    # start the object detection processes
-    for detection_process in detection_processes:
-        detection_process.start()
-        print("detection_process pid ", detection_process.pid)
-    
-    # start the motion detection processes
-    for motion_process in motion_processes:
-        motion_process.start()
-        print("motion_process pid ", motion_process.pid)
-
-    # create a flask app that encodes frames a mjpeg on demand
-    app = Flask(__name__)
-
-    @app.route('/best_person.jpg')
-    def best_person():
-        frame = np.zeros(frame_shape, np.uint8) if best_person_frame.best_frame is None else best_person_frame.best_frame
-        ret, jpg = cv2.imencode('.jpg', frame)
-        response = make_response(jpg.tobytes())
-        response.headers['Content-Type'] = 'image/jpg'
-        return response
-
-    @app.route('/')
-    def index():
-        # return a multipart response
-        return Response(imagestream(),
-                        mimetype='multipart/x-mixed-replace; boundary=frame')
-    def imagestream():
-        while True:
-            # max out at 5 FPS
-            time.sleep(0.2)
-            # make a copy of the current detected objects
-            detected_objects = DETECTED_OBJECTS.copy()
-            # lock and make a copy of the current frame
-            with frame_lock:
-                frame = frame_arr.copy()
-            # convert to RGB for drawing
-            frame = cv2.cvtColor(frame, cv2.COLOR_BGR2RGB)
-            # draw the bounding boxes on the screen
-            for obj in detected_objects:
-                vis_util.draw_bounding_box_on_image_array(frame,
-                    obj['ymin'],
-                    obj['xmin'],
-                    obj['ymax'],
-                    obj['xmax'],
-                    color='red',
-                    thickness=2,
-                    display_str_list=["{}: {}%".format(obj['name'],int(obj['score']*100))],
-                    use_normalized_coordinates=False)
-
-            for region in regions:
-                color = (255,255,255)
-                if region['motion_detected'].is_set():
-                    color = (0,255,0)
-                cv2.rectangle(frame, (region['x_offset'], region['y_offset']), 
-                    (region['x_offset']+region['size'], region['y_offset']+region['size']), 
-                    color, 2)
-
-            # convert back to BGR
-            frame = cv2.cvtColor(frame, cv2.COLOR_RGB2BGR)
-            # encode the image into a jpg
-            ret, jpg = cv2.imencode('.jpg', frame)
-            yield (b'--frame\r\n'
-                b'Content-Type: image/jpeg\r\n\r\n' + jpg.tobytes() + b'\r\n\r\n')
-
-    app.run(host='0.0.0.0', debug=False)
-
-    capture_process.join()
-    for detection_process in detection_processes:
-        detection_process.join()
-    for motion_process in motion_processes:
-        motion_process.join()
-    frame_tracker.join()
-    best_person_frame.join()
-    object_parser.join()
-    object_cleaner.join()
-    mqtt_publisher.join()
-
-if __name__ == '__main__':
-    main()

docker-compose.yml

@@ -0,0 +1,41 @@
+version: "3"
+services:
+  devcontainer:
+    container_name: frigate-devcontainer
+    # add groups from host for render, plugdev, video
+    group_add:
+      - "109" # render
+      - "110" # render
+      - "44"  # video
+      - "46"  # plugdev
+    shm_size: "256mb"
+    build:
+      context: .
+      dockerfile: docker/main/Dockerfile
+      # Use target devcontainer-trt for TensorRT dev
+      target: devcontainer
+    ## Uncomment this block for nvidia gpu support
+    # deploy:
+    #       resources:
+    #           reservations:
+    #               devices:
+    #                   - driver: nvidia
+    #                     count: 1
+    #                     capabilities: [gpu]
+    environment:
+      YOLO_MODELS: yolov7-320
+    devices:
+      - /dev/bus/usb:/dev/bus/usb
+      # - /dev/dri:/dev/dri # for intel hwaccel, needs to be updated for your hardware
+    volumes:
+      - .:/workspace/frigate:cached
+      - ./web/dist:/opt/frigate/web:cached
+      - /etc/localtime:/etc/localtime:ro
+      - ./config:/config
+      - ./debug:/media/frigate
+      - /dev/bus/usb:/dev/bus/usb
+  mqtt:
+    container_name: mqtt
+    image: eclipse-mosquitto:1.6
+    ports:
+      - "1883:1883"

docker/main/Dockerfile

@@ -0,0 +1,278 @@
+# syntax=docker/dockerfile:1.6
+
+# https://askubuntu.com/questions/972516/debian-frontend-environment-variable
+ARG DEBIAN_FRONTEND=noninteractive
+
+ARG BASE_IMAGE=debian:11
+ARG SLIM_BASE=debian:11-slim
+
+FROM ${BASE_IMAGE} AS base
+
+FROM --platform=${BUILDPLATFORM} debian:11 AS base_host
+
+FROM ${SLIM_BASE} AS slim-base
+
+FROM slim-base AS wget
+ARG DEBIAN_FRONTEND
+RUN apt-get update \
+    && apt-get install -y wget xz-utils \
+    && rm -rf /var/lib/apt/lists/*
+WORKDIR /rootfs
+
+FROM base AS nginx
+ARG DEBIAN_FRONTEND
+ENV CCACHE_DIR /root/.ccache
+ENV CCACHE_MAXSIZE 2G
+
+# bind /var/cache/apt to tmpfs to speed up nginx build
+RUN --mount=type=tmpfs,target=/tmp --mount=type=tmpfs,target=/var/cache/apt \
+    --mount=type=bind,source=docker/main/build_nginx.sh,target=/deps/build_nginx.sh \
+    --mount=type=cache,target=/root/.ccache \
+    /deps/build_nginx.sh
+
+FROM scratch AS go2rtc
+ARG TARGETARCH
+WORKDIR /rootfs/usr/local/go2rtc/bin
+ADD --link --chmod=755 "https://github.com/AlexxIT/go2rtc/releases/download/v1.9.2/go2rtc_linux_${TARGETARCH}" go2rtc
+
+FROM wget AS tempio
+ARG TARGETARCH
+RUN --mount=type=bind,source=docker/main/install_tempio.sh,target=/deps/install_tempio.sh \
+    /deps/install_tempio.sh
+
+####
+#
+# OpenVino Support
+#
+# 1. Download and convert a model from Intel's Public Open Model Zoo
+#
+####
+# Download and Convert OpenVino model
+FROM base_host AS ov-converter
+ARG DEBIAN_FRONTEND
+
+# Install OpenVino Runtime and Dev library
+COPY docker/main/requirements-ov.txt /requirements-ov.txt
+RUN apt-get -qq update \
+    && apt-get -qq install -y wget python3 python3-dev python3-distutils gcc pkg-config libhdf5-dev \
+    && wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
+    && python3 get-pip.py "pip" \
+    && pip install -r /requirements-ov.txt
+
+# Get OpenVino Model
+RUN --mount=type=bind,source=docker/main/build_ov_model.py,target=/build_ov_model.py \
+    mkdir /models && cd /models \
+    && wget http://download.tensorflow.org/models/object_detection/ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz \
+    && tar -xvf ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz \
+    && python3 /build_ov_model.py
+
+####
+#
+# Coral Compatibility
+#
+# Builds libusb without udev. Needed for synology and other devices with USB coral
+####
+# libUSB - No Udev
+FROM wget as libusb-build
+ARG TARGETARCH
+ARG DEBIAN_FRONTEND
+ENV CCACHE_DIR /root/.ccache
+ENV CCACHE_MAXSIZE 2G
+
+# Build libUSB without udev.  Needed for Openvino NCS2 support
+WORKDIR /opt
+RUN apt-get update && apt-get install -y unzip build-essential automake libtool ccache pkg-config
+RUN --mount=type=cache,target=/root/.ccache wget -q https://github.com/libusb/libusb/archive/v1.0.26.zip -O v1.0.26.zip && \
+    unzip v1.0.26.zip && cd libusb-1.0.26 && \
+    ./bootstrap.sh && \
+    ./configure CC='ccache gcc' CCX='ccache g++' --disable-udev --enable-shared && \
+    make -j $(nproc --all)
+RUN apt-get update && \
+    apt-get install -y --no-install-recommends libusb-1.0-0-dev && \
+    rm -rf /var/lib/apt/lists/*
+WORKDIR /opt/libusb-1.0.26/libusb
+RUN /bin/mkdir -p '/usr/local/lib' && \
+    /bin/bash ../libtool  --mode=install /usr/bin/install -c libusb-1.0.la '/usr/local/lib' && \
+    /bin/mkdir -p '/usr/local/include/libusb-1.0' && \
+    /usr/bin/install -c -m 644 libusb.h '/usr/local/include/libusb-1.0' && \
+    /bin/mkdir -p '/usr/local/lib/pkgconfig' && \
+    cd  /opt/libusb-1.0.26/ && \
+    /usr/bin/install -c -m 644 libusb-1.0.pc '/usr/local/lib/pkgconfig' && \
+    ldconfig
+
+FROM wget AS models
+
+# Get model and labels
+RUN wget -qO edgetpu_model.tflite https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess_edgetpu.tflite
+RUN wget -qO cpu_model.tflite https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess.tflite
+COPY labelmap.txt .
+# Copy OpenVino model
+COPY --from=ov-converter /models/ssdlite_mobilenet_v2.xml openvino-model/
+COPY --from=ov-converter /models/ssdlite_mobilenet_v2.bin openvino-model/
+RUN wget -q https://github.com/openvinotoolkit/open_model_zoo/raw/master/data/dataset_classes/coco_91cl_bkgr.txt -O openvino-model/coco_91cl_bkgr.txt && \
+    sed -i 's/truck/car/g' openvino-model/coco_91cl_bkgr.txt
+# Get Audio Model and labels
+RUN wget -qO - https://www.kaggle.com/api/v1/models/google/yamnet/tfLite/classification-tflite/1/download | tar xvz && mv 1.tflite cpu_audio_model.tflite
+COPY audio-labelmap.txt .
+
+
+FROM wget AS s6-overlay
+ARG TARGETARCH
+RUN --mount=type=bind,source=docker/main/install_s6_overlay.sh,target=/deps/install_s6_overlay.sh \
+    /deps/install_s6_overlay.sh
+
+
+FROM base AS wheels
+ARG DEBIAN_FRONTEND
+ARG TARGETARCH
+
+# Use a separate container to build wheels to prevent build dependencies in final image
+RUN apt-get -qq update \
+    && apt-get -qq install -y \
+    apt-transport-https \
+    gnupg \
+    wget \
+    # the key fingerprint can be obtained from https://ftp-master.debian.org/keys.html
+    && wget -qO- "https://keyserver.ubuntu.com/pks/lookup?op=get&search=0xA4285295FC7B1A81600062A9605C66F00D6C9793" | \
+    gpg --dearmor > /usr/share/keyrings/debian-archive-bullseye-stable.gpg \
+    && echo "deb [signed-by=/usr/share/keyrings/debian-archive-bullseye-stable.gpg] http://deb.debian.org/debian bullseye main contrib non-free" | \
+    tee /etc/apt/sources.list.d/debian-bullseye-nonfree.list \
+    && apt-get -qq update \
+    && apt-get -qq install -y \
+    python3.9 \
+    python3.9-dev \
+    # opencv dependencies
+    build-essential cmake git pkg-config libgtk-3-dev \
+    libavcodec-dev libavformat-dev libswscale-dev libv4l-dev \
+    libxvidcore-dev libx264-dev libjpeg-dev libpng-dev libtiff-dev \
+    gfortran openexr libatlas-base-dev libssl-dev\
+    libtbb2 libtbb-dev libdc1394-22-dev libopenexr-dev \
+    libgstreamer-plugins-base1.0-dev libgstreamer1.0-dev \
+    # scipy dependencies
+    gcc gfortran libopenblas-dev liblapack-dev && \
+    rm -rf /var/lib/apt/lists/*
+
+# Ensure python3 defaults to python3.9
+RUN update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.9 1
+
+RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
+    && python3 get-pip.py "pip"
+
+COPY docker/main/requirements.txt /requirements.txt
+RUN pip3 install -r /requirements.txt
+
+COPY docker/main/requirements-wheels.txt /requirements-wheels.txt
+RUN pip3 wheel --wheel-dir=/wheels -r /requirements-wheels.txt
+
+
+# Collect deps in a single layer
+FROM scratch AS deps-rootfs
+COPY --from=nginx /usr/local/nginx/ /usr/local/nginx/
+COPY --from=go2rtc /rootfs/ /
+COPY --from=libusb-build /usr/local/lib /usr/local/lib
+COPY --from=tempio /rootfs/ /
+COPY --from=s6-overlay /rootfs/ /
+COPY --from=models /rootfs/ /
+COPY docker/main/rootfs/ /
+
+
+# Frigate deps (ffmpeg, python, nginx, go2rtc, s6-overlay, etc)
+FROM slim-base AS deps
+ARG TARGETARCH
+
+ARG DEBIAN_FRONTEND
+# http://stackoverflow.com/questions/48162574/ddg#49462622
+ARG APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=DontWarn
+
+# https://github.com/NVIDIA/nvidia-docker/wiki/Installation-(Native-GPU-Support)
+ENV NVIDIA_VISIBLE_DEVICES=all
+ENV NVIDIA_DRIVER_CAPABILITIES="compute,video,utility"
+
+ENV PATH="/usr/lib/btbn-ffmpeg/bin:/usr/local/go2rtc/bin:/usr/local/tempio/bin:/usr/local/nginx/sbin:${PATH}"
+
+# Install dependencies
+RUN --mount=type=bind,source=docker/main/install_deps.sh,target=/deps/install_deps.sh \
+    /deps/install_deps.sh
+
+RUN --mount=type=bind,from=wheels,source=/wheels,target=/deps/wheels \
+    python3 -m pip install --upgrade pip && \
+    pip3 install -U /deps/wheels/*.whl
+
+COPY --from=deps-rootfs / /
+
+RUN ldconfig
+
+EXPOSE 5000
+EXPOSE 8554
+EXPOSE 8555/tcp 8555/udp
+
+# Configure logging to prepend timestamps, log to stdout, keep 0 archives and rotate on 10MB
+ENV S6_LOGGING_SCRIPT="T 1 n0 s10000000 T"
+# Do not fail on long-running download scripts
+ENV S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0
+
+ENTRYPOINT ["/init"]
+CMD []
+
+HEALTHCHECK --start-period=120s --start-interval=5s --interval=15s --timeout=5s --retries=3 \
+    CMD curl --fail --silent --show-error http://127.0.0.1:5000/api/version || exit 1
+
+# Frigate deps with Node.js and NPM for devcontainer
+FROM deps AS devcontainer
+
+# Do not start the actual Frigate service on devcontainer as it will be started by VSCode
+# But start a fake service for simulating the logs
+COPY docker/main/fake_frigate_run /etc/s6-overlay/s6-rc.d/frigate/run
+
+# Create symbolic link to the frigate source code, as go2rtc's create_config.sh uses it
+RUN mkdir -p /opt/frigate \
+    && ln -svf /workspace/frigate/frigate /opt/frigate/frigate
+
+# Install Node 20
+RUN curl -SLO https://deb.nodesource.com/nsolid_setup_deb.sh && \
+    chmod 500 nsolid_setup_deb.sh && \
+    ./nsolid_setup_deb.sh 20 && \
+    apt-get install nodejs -y \
+    && rm -rf /var/lib/apt/lists/* \
+    && npm install -g npm@10
+
+WORKDIR /workspace/frigate
+
+RUN apt-get update \
+    && apt-get install make -y \
+    && rm -rf /var/lib/apt/lists/*
+
+RUN --mount=type=bind,source=./docker/main/requirements-dev.txt,target=/workspace/frigate/requirements-dev.txt \
+    pip3 install -r requirements-dev.txt
+
+HEALTHCHECK NONE
+
+CMD ["sleep", "infinity"]
+
+
+# Frigate web build
+# This should be architecture agnostic, so speed up the build on multiarch by not using QEMU.
+FROM --platform=$BUILDPLATFORM node:20 AS web-build
+
+WORKDIR /work
+COPY web/package.json web/package-lock.json ./
+RUN npm install
+
+COPY web/ ./
+RUN npm run build \
+    && mv dist/BASE_PATH/monacoeditorwork/* dist/assets/ \
+    && rm -rf dist/BASE_PATH
+
+# Collect final files in a single layer
+FROM scratch AS rootfs
+
+WORKDIR /opt/frigate/
+COPY frigate frigate/
+COPY migrations migrations/
+COPY --from=web-build /work/dist/ web/
+
+# Frigate final container
+FROM deps AS frigate
+
+WORKDIR /opt/frigate/
+COPY --from=rootfs / /

docker/main/build_nginx.sh

@@ -0,0 +1,80 @@
+#!/bin/bash
+
+set -euxo pipefail
+
+NGINX_VERSION="1.25.3"
+VOD_MODULE_VERSION="1.31"
+SECURE_TOKEN_MODULE_VERSION="1.5"
+SET_MISC_MODULE_VERSION="v0.33"
+NGX_DEVEL_KIT_VERSION="v0.3.3"
+
+cp /etc/apt/sources.list /etc/apt/sources.list.d/sources-src.list
+sed -i 's|deb http|deb-src http|g' /etc/apt/sources.list.d/sources-src.list
+apt-get update
+
+apt-get -yqq build-dep nginx
+
+apt-get -yqq install --no-install-recommends ca-certificates wget
+update-ca-certificates -f
+apt install -y ccache
+
+export PATH="/usr/lib/ccache:$PATH"
+
+mkdir /tmp/nginx
+wget -nv https://nginx.org/download/nginx-${NGINX_VERSION}.tar.gz
+tar -zxf nginx-${NGINX_VERSION}.tar.gz -C /tmp/nginx --strip-components=1
+rm nginx-${NGINX_VERSION}.tar.gz
+mkdir /tmp/nginx-vod-module
+wget -nv https://github.com/kaltura/nginx-vod-module/archive/refs/tags/${VOD_MODULE_VERSION}.tar.gz
+tar -zxf ${VOD_MODULE_VERSION}.tar.gz -C /tmp/nginx-vod-module --strip-components=1
+rm ${VOD_MODULE_VERSION}.tar.gz
+    # Patch MAX_CLIPS to allow more clips to be added than the default 128
+sed -i 's/MAX_CLIPS (128)/MAX_CLIPS (1080)/g' /tmp/nginx-vod-module/vod/media_set.h
+patch -d /tmp/nginx-vod-module/ -p1 << 'EOF'
+--- a/vod/avc_hevc_parser.c       2022-06-27 11:38:10.000000000 +0000
++++ b/vod/avc_hevc_parser.c       2023-01-16 11:25:10.900521298 +0000
+@@ -3,6 +3,9 @@
+ bool_t
+ avc_hevc_parser_rbsp_trailing_bits(bit_reader_state_t* reader)
+ {
++	// https://github.com/blakeblackshear/frigate/issues/4572
++	return TRUE;
++
+ 	uint32_t one_bit;
+
+ 	if (reader->stream.eof_reached)
+EOF
+
+
+mkdir /tmp/nginx-secure-token-module
+wget https://github.com/kaltura/nginx-secure-token-module/archive/refs/tags/${SECURE_TOKEN_MODULE_VERSION}.tar.gz
+tar -zxf ${SECURE_TOKEN_MODULE_VERSION}.tar.gz -C /tmp/nginx-secure-token-module --strip-components=1
+rm ${SECURE_TOKEN_MODULE_VERSION}.tar.gz
+
+mkdir /tmp/ngx_devel_kit
+wget https://github.com/vision5/ngx_devel_kit/archive/refs/tags/${NGX_DEVEL_KIT_VERSION}.tar.gz
+tar -zxf ${NGX_DEVEL_KIT_VERSION}.tar.gz -C /tmp/ngx_devel_kit --strip-components=1
+rm ${NGX_DEVEL_KIT_VERSION}.tar.gz
+
+mkdir /tmp/nginx-set-misc-module
+wget https://github.com/openresty/set-misc-nginx-module/archive/refs/tags/${SET_MISC_MODULE_VERSION}.tar.gz
+tar -zxf ${SET_MISC_MODULE_VERSION}.tar.gz -C /tmp/nginx-set-misc-module --strip-components=1
+rm ${SET_MISC_MODULE_VERSION}.tar.gz
+
+cd /tmp/nginx
+
+./configure --prefix=/usr/local/nginx \
+    --with-file-aio \
+    --with-http_sub_module \
+    --with-http_ssl_module \
+    --with-http_auth_request_module \
+    --with-http_realip_module \
+    --with-threads \
+    --add-module=../ngx_devel_kit \
+    --add-module=../nginx-set-misc-module \
+    --add-module=../nginx-vod-module \
+    --add-module=../nginx-secure-token-module \
+    --with-cc-opt="-O3 -Wno-error=implicit-fallthrough"
+
+make CC="ccache gcc" -j$(nproc) && make install
+rm -rf /usr/local/nginx/html /usr/local/nginx/conf/*.default

docker/main/build_ov_model.py

@@ -0,0 +1,11 @@
+import openvino as ov
+from openvino.tools import mo
+
+ov_model = mo.convert_model(
+    "/models/ssdlite_mobilenet_v2_coco_2018_05_09/frozen_inference_graph.pb",
+    compress_to_fp16=True,
+    transformations_config="/usr/local/lib/python3.9/dist-packages/openvino/tools/mo/front/tf/ssd_v2_support.json",
+    tensorflow_object_detection_api_pipeline_config="/models/ssdlite_mobilenet_v2_coco_2018_05_09/pipeline.config",
+    reverse_input_channels=True,
+)
+ov.save_model(ov_model, "/models/ssdlite_mobilenet_v2.xml")

docker/main/fake_frigate_run

@@ -0,0 +1,13 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Start the fake Frigate service
+
+set -o errexit -o nounset -o pipefail
+
+# Tell S6-Overlay not to restart this service
+s6-svc -O .
+
+while true; do
+  echo "[INFO] The fake Frigate service is running..."
+  sleep 5s
+done

docker/main/install_deps.sh

@@ -0,0 +1,84 @@
+#!/bin/bash
+
+set -euxo pipefail
+
+apt-get -qq update
+
+apt-get -qq install --no-install-recommends -y \
+    apt-transport-https \
+    gnupg \
+    wget \
+    procps vainfo \
+    unzip locales tzdata libxml2 xz-utils \
+    python3.9 \
+    python3-pip \
+    curl \
+    jq \
+    nethogs
+
+# ensure python3 defaults to python3.9
+update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.9 1
+
+mkdir -p -m 600 /root/.gnupg
+
+# add coral repo
+curl -fsSLo - https://packages.cloud.google.com/apt/doc/apt-key.gpg | \
+    gpg --dearmor -o /etc/apt/trusted.gpg.d/google-cloud-packages-archive-keyring.gpg
+echo "deb https://packages.cloud.google.com/apt coral-edgetpu-stable main" | tee /etc/apt/sources.list.d/coral-edgetpu.list
+echo "libedgetpu1-max libedgetpu/accepted-eula select true" | debconf-set-selections
+
+# enable non-free repo in Debian
+if grep -q "Debian" /etc/issue; then
+    sed -i -e's/ main/ main contrib non-free/g' /etc/apt/sources.list
+fi
+
+# coral drivers
+apt-get -qq update
+apt-get -qq install --no-install-recommends --no-install-suggests -y \
+    libedgetpu1-max python3-tflite-runtime python3-pycoral
+
+# btbn-ffmpeg -> amd64
+if [[ "${TARGETARCH}" == "amd64" ]]; then
+    mkdir -p /usr/lib/btbn-ffmpeg
+    wget -qO btbn-ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linux64-gpl-5.1.tar.xz"
+    tar -xf btbn-ffmpeg.tar.xz -C /usr/lib/btbn-ffmpeg --strip-components 1
+    rm -rf btbn-ffmpeg.tar.xz /usr/lib/btbn-ffmpeg/doc /usr/lib/btbn-ffmpeg/bin/ffplay
+fi
+
+# ffmpeg -> arm64
+if [[ "${TARGETARCH}" == "arm64" ]]; then
+    mkdir -p /usr/lib/btbn-ffmpeg
+    wget -qO btbn-ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linuxarm64-gpl-5.1.tar.xz"
+    tar -xf btbn-ffmpeg.tar.xz -C /usr/lib/btbn-ffmpeg --strip-components 1
+    rm -rf btbn-ffmpeg.tar.xz /usr/lib/btbn-ffmpeg/doc /usr/lib/btbn-ffmpeg/bin/ffplay
+fi
+
+# arch specific packages
+if [[ "${TARGETARCH}" == "amd64" ]]; then
+    # use debian bookworm for hwaccel packages
+    echo 'deb https://deb.debian.org/debian bookworm main contrib non-free' >/etc/apt/sources.list.d/debian-bookworm.list
+    apt-get -qq update
+    apt-get -qq install --no-install-recommends --no-install-suggests -y \
+        intel-opencl-icd \
+        mesa-va-drivers radeontop libva-drm2 intel-media-va-driver-non-free i965-va-driver libmfx1 intel-gpu-tools
+    # something about this dependency requires it to be installed in a separate call rather than in the line above
+    apt-get -qq install --no-install-recommends --no-install-suggests -y \
+        i965-va-driver-shaders
+    rm -f /etc/apt/sources.list.d/debian-bookworm.list
+fi
+
+if [[ "${TARGETARCH}" == "arm64" ]]; then
+    apt-get -qq install --no-install-recommends --no-install-suggests -y \
+        libva-drm2 mesa-va-drivers
+fi
+
+apt-get purge gnupg apt-transport-https xz-utils -y
+apt-get clean autoclean -y
+apt-get autoremove --purge -y
+rm -rf /var/lib/apt/lists/*
+
+# Install yq, for frigate-prepare and go2rtc echo source
+curl -fsSL \
+    "https://github.com/mikefarah/yq/releases/download/v4.33.3/yq_linux_$(dpkg --print-architecture)" \
+    --output /usr/local/bin/yq
+chmod +x /usr/local/bin/yq

docker/main/install_s6_overlay.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+
+set -euxo pipefail
+
+s6_version="3.1.5.0"
+
+if [[ "${TARGETARCH}" == "amd64" ]]; then
+    s6_arch="x86_64"
+elif [[ "${TARGETARCH}" == "arm64" ]]; then
+    s6_arch="aarch64"
+fi
+
+mkdir -p /rootfs/
+
+wget -qO- "https://github.com/just-containers/s6-overlay/releases/download/v${s6_version}/s6-overlay-noarch.tar.xz" |
+    tar -C /rootfs/ -Jxpf -
+
+wget -qO- "https://github.com/just-containers/s6-overlay/releases/download/v${s6_version}/s6-overlay-${s6_arch}.tar.xz" |
+    tar -C /rootfs/ -Jxpf -

docker/main/install_tempio.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+set -euxo pipefail
+
+tempio_version="2021.09.0"
+
+if [[ "${TARGETARCH}" == "amd64" ]]; then
+    arch="amd64"
+elif [[ "${TARGETARCH}" == "arm64" ]]; then
+    arch="aarch64"
+fi
+
+mkdir -p /rootfs/usr/local/tempio/bin
+
+wget -q -O /rootfs/usr/local/tempio/bin/tempio "https://github.com/home-assistant/tempio/releases/download/${tempio_version}/tempio_${arch}"
+chmod 755 /rootfs/usr/local/tempio/bin/tempio

docker/main/requirements-dev.txt

@@ -0,0 +1 @@
+ruff

docker/main/requirements-ov.txt

@@ -0,0 +1,3 @@
+numpy
+tensorflow
+openvino-dev>=2024.0.0

docker/main/requirements-wheels.txt

@@ -0,0 +1,32 @@
+click == 8.1.*
+Flask == 3.0.*
+Flask_Limiter == 3.7.*
+imutils == 0.5.*
+joserfc == 0.11.*
+markupsafe == 2.1.*
+mypy == 1.6.1
+numpy == 1.26.*
+onvif_zeep == 0.2.12
+opencv-python-headless == 4.9.0.*
+paho-mqtt == 2.1.*
+pandas == 2.2.*
+peewee == 3.17.*
+peewee_migrate == 1.12.*
+psutil == 5.9.*
+pydantic == 2.7.*
+git+https://github.com/fbcotter/py3nvml#egg=py3nvml
+PyYAML == 6.0.*
+pytz == 2024.1
+pyzmq == 26.0.*
+ruamel.yaml == 0.18.*
+tzlocal == 5.2
+types-PyYAML == 6.0.*
+requests == 2.32.*
+types-requests == 2.32.*
+scipy == 1.13.*
+norfair == 2.2.*
+setproctitle == 1.3.*
+ws4py == 0.5.*
+unidecode == 1.3.*
+onnxruntime == 1.18.*
+openvino == 2024.1.*

docker/main/requirements.txt

@@ -0,0 +1,2 @@
+scikit-build == 0.17.*
+nvidia-pyindex

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/consumer-for

@@ -0,0 +1 @@
+certsync

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/pipeline-name

@@ -0,0 +1 @@
+certsync-pipeline

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/run

@@ -0,0 +1,4 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+
+exec logutil-service /dev/shm/logs/certsync

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/type

@@ -0,0 +1 @@
+longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/finish

@@ -0,0 +1,30 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Take down the S6 supervision tree when the service fails
+
+set -o errexit -o nounset -o pipefail
+
+# Logs should be sent to stdout so that s6 can collect them
+
+declare exit_code_container
+exit_code_container=$(cat /run/s6-linux-init-container-results/exitcode)
+readonly exit_code_container
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+readonly service="CERTSYNC"
+
+echo "[INFO] Service ${service} exited with code ${exit_code_service} (by signal ${exit_code_signal})"
+
+if [[ "${exit_code_service}" -eq 256 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo $((128 + exit_code_signal)) >/run/s6-linux-init-container-results/exitcode
+  fi
+  if [[ "${exit_code_signal}" -eq 15 ]]; then
+    exec /run/s6/basedir/bin/halt
+  fi
+elif [[ "${exit_code_service}" -ne 0 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo "${exit_code_service}" >/run/s6-linux-init-container-results/exitcode
+  fi
+  exec /run/s6/basedir/bin/halt
+fi

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/producer-for

@@ -0,0 +1 @@
+certsync-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/run

@@ -0,0 +1,58 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Start the CERTSYNC service
+
+set -o errexit -o nounset -o pipefail
+
+# Logs should be sent to stdout so that s6 can collect them
+
+echo "[INFO] Starting certsync..."
+
+lefile="/etc/letsencrypt/live/frigate/fullchain.pem"
+
+tls_enabled=`python3 /usr/local/nginx/get_tls_settings.py | jq -r .enabled`
+
+while true
+do
+    if [[ "$tls_enabled" == 'false' ]]; then
+        sleep 9999
+        continue
+    fi
+
+    if [ ! -e $lefile ]
+    then
+        echo "[ERROR] TLS certificate does not exist: $lefile"
+    fi
+
+    leprint=`openssl x509 -in $lefile -fingerprint -noout 2>&1 || echo 'failed'`
+
+    case "$leprint" in
+        *Fingerprint*)
+            ;;
+        *)
+            echo "[ERROR] Missing fingerprint from $lefile"
+            ;;
+    esac
+
+    liveprint=`echo | openssl s_client -showcerts -connect 127.0.0.1:8971 2>&1 | openssl x509 -fingerprint 2>&1 | grep -i fingerprint  || echo 'failed'`
+
+    case "$liveprint" in
+        *Fingerprint*)
+            ;;
+        *)
+            echo "[ERROR] Missing fingerprint from current nginx TLS cert"
+            ;;
+    esac
+
+    if [[ "$leprint" != "failed" && "$liveprint" != "failed" && "$leprint" != "$liveprint" ]]
+    then
+        echo "[INFO] Reloading nginx to refresh TLS certificate"
+        echo "$lefile: $leprint"
+        /usr/local/nginx/sbin/nginx -s reload
+    fi
+
+    sleep 60
+
+done
+
+exit 0

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/timeout-kill

@@ -0,0 +1 @@
+30000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/type

@@ -0,0 +1 @@
+longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate-log/consumer-for

@@ -0,0 +1 @@
+frigate

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate-log/pipeline-name

@@ -0,0 +1 @@
+frigate-pipeline

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate-log/run

@@ -0,0 +1,4 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+
+exec logutil-service /dev/shm/logs/frigate

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate-log/type

@@ -0,0 +1 @@
+longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/finish

@@ -0,0 +1,28 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Take down the S6 supervision tree when the service exits
+
+set -o errexit -o nounset -o pipefail
+
+# Logs should be sent to stdout so that s6 can collect them
+
+declare exit_code_container
+exit_code_container=$(cat /run/s6-linux-init-container-results/exitcode)
+readonly exit_code_container
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+readonly service="Frigate"
+
+echo "[INFO] Service ${service} exited with code ${exit_code_service} (by signal ${exit_code_signal})"
+
+if [[ "${exit_code_service}" -eq 256 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo $((128 + exit_code_signal)) >/run/s6-linux-init-container-results/exitcode
+  fi
+elif [[ "${exit_code_service}" -ne 0 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo "${exit_code_service}" >/run/s6-linux-init-container-results/exitcode
+  fi
+fi
+
+exec /run/s6/basedir/bin/halt

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/producer-for

@@ -0,0 +1 @@
+frigate-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/run

@@ -0,0 +1,55 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Start the Frigate service
+
+set -o errexit -o nounset -o pipefail
+
+# Logs should be sent to stdout so that s6 can collect them
+
+# Tell S6-Overlay not to restart this service
+s6-svc -O .
+
+function migrate_db_path() {
+    # Find config file in yaml or yml, but prefer yaml
+    local config_file="${CONFIG_FILE:-"/config/config.yml"}"
+    local config_file_yaml="${config_file//.yml/.yaml}"
+    if [[ -f "${config_file_yaml}" ]]; then
+        config_file="${config_file_yaml}"
+    elif [[ ! -f "${config_file}" ]]; then
+        # Frigate will create the config file on startup
+        return 0
+    fi
+    unset config_file_yaml
+
+    # Use yq to check if database.path is set
+    local user_db_path
+    user_db_path=$(yq eval '.database.path' "${config_file}")
+
+    if [[ "${user_db_path}" == "null" ]]; then
+        local previous_db_path="/media/frigate/frigate.db"
+        local new_db_dir="/config"
+        if [[ -f "${previous_db_path}" ]]; then
+            if mountpoint --quiet "${new_db_dir}"; then
+                # /config is a mount point, move the db
+                echo "[INFO] Moving db from '${previous_db_path}' to the '${new_db_dir}' dir..."
+                # Move all files that starts with frigate.db to the new directory
+                mv -vf "${previous_db_path}"* "${new_db_dir}"
+            else
+                echo "[ERROR] Trying to migrate the db path from '${previous_db_path}' to the '${new_db_dir}' dir, but '${new_db_dir}' is not a mountpoint, please mount the '${new_db_dir}' dir"
+                return 1
+            fi
+        fi
+    fi
+}
+
+echo "[INFO] Preparing Frigate..."
+migrate_db_path
+export LIBAVFORMAT_VERSION_MAJOR=$(ffmpeg -version | grep -Po 'libavformat\W+\K\d+')
+
+echo "[INFO] Starting Frigate..."
+
+cd /opt/frigate || echo "[ERROR] Failed to change working directory to /opt/frigate"
+
+# Replace the bash process with the Frigate process, redirecting stderr to stdout
+exec 2>&1
+exec python3 -u -m frigate

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/timeout-kill

@@ -0,0 +1 @@
+120000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/type

@@ -0,0 +1 @@
+longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/finish

@@ -0,0 +1,12 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+
+set -o errexit -o nounset -o pipefail
+
+# Logs should be sent to stdout so that s6 can collect them
+
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+readonly service="go2rtc-healthcheck"
+
+echo "[INFO] The ${service} service exited with code ${exit_code_service} (by signal ${exit_code_signal})"

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/producer-for

@@ -0,0 +1 @@
+go2rtc-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/run

@@ -0,0 +1,22 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Start the go2rtc-healthcheck service
+
+set -o errexit -o nounset -o pipefail
+
+# Logs should be sent to stdout so that s6 can collect them
+
+# Give some additional time for go2rtc to start before start pinging
+sleep 10s
+echo "[INFO] Starting go2rtc healthcheck service..."
+
+while sleep 30s; do
+    # Check if the service is running
+    if ! curl --connect-timeout 10 --fail --silent --show-error --output /dev/null http://127.0.0.1:1984/api/streams 2>&1; then
+        echo "[ERROR] The go2rtc service is not responding to ping, restarting..."
+        # We can also use -r instead of -t to send kill signal rather than term
+        s6-svc -t /var/run/service/go2rtc 2>&1
+        # Give some additional time to go2rtc to restart before start pinging again
+        sleep 10s
+    fi
+done

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/timeout-kill

@@ -0,0 +1 @@
+5000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/type

@@ -0,0 +1 @@
+longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-log/consumer-for

@@ -0,0 +1,2 @@
+go2rtc
+go2rtc-healthcheck

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-log/pipeline-name

@@ -0,0 +1 @@
+go2rtc-pipeline

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-log/run

@@ -0,0 +1,4 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+
+exec logutil-service /dev/shm/logs/go2rtc

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-log/type

@@ -0,0 +1 @@
+longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc/finish

@@ -0,0 +1,12 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+
+set -o errexit -o nounset -o pipefail
+
+# Logs should be sent to stdout so that s6 can collect them
+
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+readonly service="go2rtc"
+
+echo "[INFO] The ${service} service exited with code ${exit_code_service} (by signal ${exit_code_signal})"

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc/producer-for

@@ -0,0 +1 @@
+go2rtc-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc/run

@@ -0,0 +1,79 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Start the go2rtc service
+
+set -o errexit -o nounset -o pipefail
+
+# Logs should be sent to stdout so that s6 can collect them
+
+function get_ip_and_port_from_supervisor() {
+    local ip_address
+    # Example: 192.168.1.10/24
+    local ip_regex='^([0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3})/[0-9]{1,2}$'
+    if ip_address=$(
+        curl -fsSL \
+            -H "Authorization: Bearer ${SUPERVISOR_TOKEN}" \
+            -H "Content-Type: application/json" \
+            http://supervisor/network/interface/default/info |
+            jq --exit-status --raw-output '.data.ipv4.address[0]'
+    ) && [[ "${ip_address}" =~ ${ip_regex} ]]; then
+        ip_address="${BASH_REMATCH[1]}"
+        echo "[INFO] Got IP address from supervisor: ${ip_address}"
+    else
+        echo "[WARN] Failed to get IP address from supervisor"
+        return 0
+    fi
+
+    local webrtc_port
+    local port_regex='^([0-9]{1,5})$'
+    if webrtc_port=$(
+        curl -fsSL \
+            -H "Authorization: Bearer ${SUPERVISOR_TOKEN}" \
+            -H "Content-Type: application/json" \
+            http://supervisor/addons/self/info |
+            jq --exit-status --raw-output '.data.network["8555/tcp"]'
+    ) && [[ "${webrtc_port}" =~ ${port_regex} ]]; then
+        webrtc_port="${BASH_REMATCH[1]}"
+        echo "[INFO] Got WebRTC port from supervisor: ${webrtc_port}"
+    else
+        echo "[WARN] Failed to get WebRTC port from supervisor"
+        return 0
+    fi
+
+    export FRIGATE_GO2RTC_WEBRTC_CANDIDATE_INTERNAL="${ip_address}:${webrtc_port}"
+}
+
+export LIBAVFORMAT_VERSION_MAJOR=$(ffmpeg -version | grep -Po 'libavformat\W+\K\d+')
+
+if [[ -f "/dev/shm/go2rtc.yaml" ]]; then
+    echo "[INFO] Removing stale config from last run..."
+    rm /dev/shm/go2rtc.yaml
+fi
+
+if [[ ! -f "/dev/shm/go2rtc.yaml" ]]; then
+    echo "[INFO] Preparing new go2rtc config..."
+
+    if [[ -n "${SUPERVISOR_TOKEN:-}" ]]; then
+        # Running as a Home Assistant add-on, infer the IP address and port
+        get_ip_and_port_from_supervisor
+    fi
+
+    python3 /usr/local/go2rtc/create_config.py
+else
+    echo "[WARNING] Unable to remove existing go2rtc config. Changes made to your frigate config file may not be recognized. Please remove the /dev/shm/go2rtc.yaml from your docker host manually."
+fi
+
+readonly config_path="/config"
+
+if [[ -x "${config_path}/go2rtc" ]]; then
+  readonly binary_path="${config_path}/go2rtc"
+  echo "[WARN] Using go2rtc binary from '${binary_path}' instead of the embedded one"
+else
+  readonly binary_path="/usr/local/go2rtc/bin/go2rtc"
+fi
+
+echo "[INFO] Starting go2rtc..."
+
+# Replace the bash process with the go2rtc process, redirecting stderr to stdout
+exec 2>&1
+exec "${binary_path}" -config=/dev/shm/go2rtc.yaml

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc/timeout-kill

@@ -0,0 +1 @@
+30000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc/type

@@ -0,0 +1 @@
+longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/log-prepare/run

@@ -0,0 +1,11 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+# Prepare the logs folder for s6-log
+
+set -o errexit -o nounset -o pipefail
+
+dirs=(/dev/shm/logs/frigate /dev/shm/logs/go2rtc /dev/shm/logs/nginx /dev/shm/logs/certsync)
+
+mkdir -p "${dirs[@]}"
+chown nobody:nogroup "${dirs[@]}"
+chmod 02755 "${dirs[@]}"

docker/main/rootfs/etc/s6-overlay/s6-rc.d/log-prepare/type

@@ -0,0 +1 @@
+oneshot

docker/main/rootfs/etc/s6-overlay/s6-rc.d/log-prepare/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/log-prepare/run

docker/main/rootfs/etc/s6-overlay/s6-rc.d/nginx-log/consumer-for

@@ -0,0 +1 @@
+nginx

docker/main/rootfs/etc/s6-overlay/s6-rc.d/nginx-log/pipeline-name

@@ -0,0 +1 @@
+nginx-pipeline

docker/main/rootfs/etc/s6-overlay/s6-rc.d/nginx-log/run

@@ -0,0 +1,4 @@
+#!/command/with-contenv bash
+# shellcheck shell=bash
+
+exec logutil-service /dev/shm/logs/nginx

docker/main/rootfs/etc/s6-overlay/s6-rc.d/nginx-log/type

@@ -0,0 +1 @@
+longrun