fix(web): ensure all links on events page include pathname

fixes #544

.cspell/frigate-dictionary.txt

@@ -1,318 +0,0 @@
-aarch
-absdiff
-airockchip
-Alloc
-alpr
-Amcrest
-amdgpu
-analyzeduration
-Annke
-apexcharts
-arange
-argmax
-argmin
-argpartition
-ascontiguousarray
-astype
-authelia
-authentik
-autodetected
-automations
-autotrack
-autotracked
-autotracker
-autotracking
-balena
-Beelink
-BGRA
-BHWC
-blackshear
-blakeblackshear
-bottombar
-buildx
-castable
-cdist
-Celeron
-cgroups
-chipset
-chromadb
-Chromecast
-cmdline
-codeowner
-CODEOWNERS
-codeproject
-colormap
-colorspace
-comms
-cooldown
-coro
-ctypeslib
-CUDA
-Cuvid
-Dahua
-datasheet
-debconf
-deci
-deepstack
-defragment
-devcontainer
-DEVICEMAP
-discardcorrupt
-dpkg
-dsize
-dtype
-ECONNRESET
-edgetpu
-facenet
-fastapi
-faststart
-fflags
-ffprobe
-fillna
-flac
-foscam
-fourcc
-framebuffer
-fregate
-frégate
-fromarray
-frombuffer
-frontdoor
-fstype
-fullchain
-fullscreen
-genai
-generativeai
-genpts
-getpid
-gpuload
-HACS
-Hailo
-hass
-hconcat
-healthcheck
-hideable
-Hikvision
-homeassistant
-homekit
-homography
-hsize
-hstack
-httpx
-hwaccel
-hwdownload
-hwmap
-hwupload
-iloc
-imagestream
-imdecode
-imencode
-imread
-imwrite
-inpoint
-interp
-iostat
-iotop
-itemsize
-Jellyfin
-jetson
-jetsons
-jina
-jinaai
-joserfc
-jsmpeg
-jsonify
-Kalman
-keepalive
-keepdims
-labelmap
-letsencrypt
-levelname
-LIBAVFORMAT
-libedgetpu
-libnvinfer
-libva
-libwebp
-libx
-libyolo
-linalg
-localzone
-logpipe
-Loryta
-lstsq
-lsusb
-markupsafe
-maxsplit
-MEMHOSTALLOC
-memlimit
-meshgrid
-metadatas
-migraphx
-minilm
-mjpeg
-mkfifo
-mobiledet
-mobilenet
-modelpath
-mosquitto
-mountpoint
-movflags
-mpegts
-mqtt
-mse
-msenc
-namedtuples
-nbytes
-nchw
-ndarray
-ndimage
-nethogs
-newaxis
-nhwc
-NOBLOCK
-nobuffer
-nokey
-NONBLOCK
-noninteractive
-noprint
-Norfair
-nptype
-NTSC
-numpy
-nvenc
-nvhost
-nvml
-nvmpi
-ollama
-onnx
-onnxruntime
-onvif
-ONVIF
-openai
-opencv
-openvino
-OWASP
-paddleocr
-paho
-passwordless
-popleft
-posthog
-postprocess
-poweroff
-preexec
-probesize
-protobuf
-pstate
-psutil
-pubkey
-putenv
-pycache
-pydantic
-pyobj
-pysqlite
-pytz
-pywebpush
-qnap
-quantisation
-Radeon
-radeonsi
-radeontop
-rawvideo
-rcond
-RDONLY
-rebranded
-referer
-reindex
-Reolink
-restream
-restreamed
-restreaming
-rkmpp
-rknn
-rkrga
-rockchip
-rocm
-rocminfo
-rootfs
-rtmp
-RTSP
-ruamel
-scroller
-setproctitle
-setpts
-shms
-SIGUSR
-skylake
-sleeptime
-SNDMORE
-socs
-sqliteq
-sqlitevecq
-ssdlite
-statm
-stimeout
-stylelint
-subclassing
-substream
-superfast
-surveillance
-svscan
-Swipeable
-sysconf
-tailscale
-Tapo
-tensorrt
-tflite
-thresholded
-timelapse
-titlecase
-tmpfs
-tobytes
-toggleable
-traefik
-tzlocal
-Ubiquiti
-udev
-udevadm
-ultrafast
-unichip
-unidecode
-Unifi
-unixepoch
-unraid
-unreviewed
-userdata
-usermod
-uvicorn
-vaapi
-vainfo
-variations
-vbios
-vconcat
-vitb
-vstream
-vsync
-wallclock
-webp
-webpush
-webrtc
-websockets
-webui
-werkzeug
-workdir
-WRONLY
-wsgirefserver
-wsgiutils
-wsize
-xaddr
-xmaxs
-xmins
-XPUB
-XSUB
-ymaxs
-ymins
-yolo
-yolonas
-yolox
-zeep
-zerolatency

.devcontainer/devcontainer.json

@@ -1,125 +0,0 @@
-{
-  "name": "Frigate Devcontainer",
-  "dockerComposeFile": "../docker-compose.yml",
-  "service": "devcontainer",
-  "workspaceFolder": "/workspace/frigate",
-  "initializeCommand": ".devcontainer/initialize.sh",
-  "postCreateCommand": ".devcontainer/post_create.sh",
-  "overrideCommand": false,
-  "remoteUser": "vscode",
-  "features": {
-    "ghcr.io/devcontainers/features/common-utils:2": {}
-    // Uncomment the following lines to use ONNX Runtime with CUDA support
-    // "ghcr.io/devcontainers/features/nvidia-cuda:1": {
-    //   "installCudnn": true,
-    //   "installNvtx": true,
-    //   "installToolkit": true,
-    //   "cudaVersion": "12.5",
-    //   "cudnnVersion": "9.4.0.58"
-    // },
-    // "./features/onnxruntime-gpu": {}
-  },
-  "forwardPorts": [
-    8971,
-    5000,
-    5001,
-    5173,
-    8554,
-    8555
-  ],
-  "portsAttributes": {
-    "8971": {
-      "label": "External NGINX",
-      "onAutoForward": "silent"
-    },
-    "5000": {
-      "label": "Internal NGINX",
-      "onAutoForward": "silent"
-    },
-    "5001": {
-      "label": "Frigate API",
-      "onAutoForward": "silent"
-    },
-    "5173": {
-      "label": "Vite Server",
-      "onAutoForward": "silent"
-    },
-    "8554": {
-      "label": "gortc RTSP",
-      "onAutoForward": "silent"
-    },
-    "8555": {
-      "label": "go2rtc WebRTC",
-      "onAutoForward": "silent"
-    }
-  },
-  "customizations": {
-    "vscode": {
-      "extensions": [
-        "ms-python.python",
-        "ms-python.vscode-pylance",
-        "visualstudioexptteam.vscodeintellicode",
-        "mhutchie.git-graph",
-        "ms-azuretools.vscode-docker",
-        "streetsidesoftware.code-spell-checker",
-        "esbenp.prettier-vscode",
-        "dbaeumer.vscode-eslint",
-        "mikestead.dotenv",
-        "csstools.postcss",
-        "blanu.vscode-styled-jsx",
-        "bradlc.vscode-tailwindcss",
-        "charliermarsh.ruff",
-        "eamodio.gitlens"
-      ],
-      "settings": {
-        "remote.autoForwardPorts": false,
-        "python.formatting.provider": "none",
-        "python.languageServer": "Pylance",
-        "editor.formatOnPaste": false,
-        "editor.formatOnSave": true,
-        "editor.formatOnType": true,
-        "python.testing.pytestEnabled": false,
-        "python.testing.unittestEnabled": true,
-        "python.testing.unittestArgs": [
-          "-v",
-          "-s",
-          "./frigate/test"
-        ],
-        "files.trimTrailingWhitespace": true,
-        "eslint.workingDirectories": [
-          "./web"
-        ],
-        "isort.args": [
-          "--settings-path=./pyproject.toml"
-        ],
-        "[python]": {
-          "editor.defaultFormatter": "charliermarsh.ruff",
-          "editor.formatOnSave": true,
-          "editor.codeActionsOnSave": {
-            "source.fixAll": true,
-            "source.organizeImports": true
-          }
-        },
-        "[json][jsonc]": {
-          "editor.defaultFormatter": "esbenp.prettier-vscode"
-        },
-        "[jsx][js][tsx][ts]": {
-          "editor.codeActionsOnSave": [
-            "source.addMissingImports",
-            "source.fixAll"
-          ],
-          "editor.tabSize": 2
-        },
-        "cSpell.ignoreWords": [
-          "rtmp"
-        ],
-        "cSpell.words": [
-          "preact",
-          "astype",
-          "hwaccel",
-          "mqtt"
-        ]
-      }
-    }
-  }
-}

.devcontainer/features/onnxruntime-gpu/devcontainer-feature.json

@@ -1,22 +0,0 @@
-{
-  "id": "onnxruntime-gpu",
-  "version": "0.0.1",
-  "name": "ONNX Runtime GPU (Nvidia)",
-  "description": "Installs ONNX Runtime for Nvidia GPUs.",
-  "documentationURL": "",
-  "options": {
-    "version": {
-      "type": "string",
-      "proposals": [
-        "latest",
-        "1.20.1",
-        "1.20.0"
-      ],
-      "default": "latest",
-      "description": "Version of ONNX Runtime to install"
-    }
-  },
-  "installsAfter": [
-    "ghcr.io/devcontainers/features/nvidia-cuda"
-  ]
-}

.devcontainer/features/onnxruntime-gpu/install.sh

@@ -1,15 +0,0 @@
-#!/usr/bin/env bash
-
-set -e
-
-VERSION=${VERSION}
-
-python3 -m pip config set global.break-system-packages true
-# if VERSION == "latest" or VERSION is empty, install the latest version
-if [ "$VERSION" == "latest" ] || [ -z "$VERSION" ]; then
-    python3 -m pip install onnxruntime-gpu
-else
-    python3 -m pip install onnxruntime-gpu==$VERSION
-fi
-
-echo "Done!"

.devcontainer/initialize.sh

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-set -euo pipefail
-
-# These folders needs to be created and owned by the host user
-mkdir -p debug web/dist
-
-if [[ -f "config/config.yml" ]]; then
-  echo "config/config.yml already exists, skipping initialization" >&2
-else
-  echo "initializing config/config.yml" >&2
-  cp -fv config/config.yml.example config/config.yml
-fi

.devcontainer/post_create.sh

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-# Cleanup the old github host key
-if [[ -f ~/.ssh/known_hosts ]]; then
-  # Add new github host key
-  sed -i -e '/AAAAB3NzaC1yc2EAAAABIwAAAQEAq2A7hRGmdnm9tUDbO9IDSwBK6TbQa+PXYPCPy6rbTrTtw7PHkccKrpp0yVhp5HdEIcKr6pLlVDBfOLX9QUsyCOV0wzfjIJNlGEYsdlLJizHhbn2mUjvSAHQqZETYP81eFzLQNnPHt4EVVUh7VfDESU84KezmD5QlWpXLmvU31\/yMf+Se8xhHTvKSCZIFImWwoG6mbUoWf9nzpIoaSjB+weqqUUmpaaasXVal72J+UX2B+2RPW3RcT0eOzQgqlJL3RKrTJvdsjE3JEAvGq3lGHSZXy28G3skua2SmVi\/w4yCE6gbODqnTWlg7+wC604ydGXA8VJiS5ap43JXiUFFAaQ==/d' ~/.ssh/known_hosts
-  curl -L https://api.github.com/meta | jq -r '.ssh_keys | .[]' | \
-    sed -e 's/^/github.com /' >> ~/.ssh/known_hosts
-fi
-
-# Frigate normal container runs as root, so it have permission to create
-# the folders. But the devcontainer runs as the host user, so we need to
-# create the folders and give the host user permission to write to them.
-sudo mkdir -p /media/frigate
-sudo chown -R "$(id -u):$(id -g)" /media/frigate
-
-# When started as a service, LIBAVFORMAT_VERSION_MAJOR is defined in the
-# s6 service file. For dev, where frigate is started from an interactive
-# shell, we define it in .bashrc instead.
-echo 'export LIBAVFORMAT_VERSION_MAJOR=$("$(python3 /usr/local/ffmpeg/get_ffmpeg_path.py)" -version | grep -Po "libavformat\W+\K\d+")' >> "$HOME/.bashrc"
-
-make version
-
-cd web
-
-npm install
-
-npm run build

.dockerignore

@@ -4,13 +4,4 @@ docs/
 debug
 config/
 *.pyc
-.git
-core
-*.mp4
-*.jpg
-*.db
-*.ts
-
-web/dist/
-web/node_modules/
-web/.npm
+.git

.github/DISCUSSION_TEMPLATE/camera-support.yml

@@ -1,138 +0,0 @@
-title: "[Camera Support]: "
-labels: ["support", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form for support or questions for an issue with your cameras.
-
-        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: input
-    attributes:
-      label: What browser(s) are you using?
-      placeholder: Google Chrome 88.0.4324.150
-      description: >
-        Provide the full name and don't forget to add the version!
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: go2rtclogs
-    attributes:
-      label: Relevant go2rtc log output
-      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: ffprobe
-    attributes:
-      label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: stats
-    attributes:
-      label: Frigate stats
-      description: Output from frigate's /api/stats endpoint
-      render: json
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - Home Assistant OS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-        - Proxmox via Docker
-        - Proxmox via TTeck Script
-        - Windows WSL2
-    validations:
-      required: true
-  - type: dropdown
-    id: object-detector
-    attributes:
-      label: Object Detector
-      options:
-        - Coral
-        - OpenVino
-        - TensorRT
-        - RKNN
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/config-support.yml

@@ -1,113 +0,0 @@
-title: "[Config Support]: "
-labels: ["support", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form for support or questions related to Frigate's configuration and config file.
-
-        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: go2rtclogs
-    attributes:
-      label: Relevant go2rtc log output
-      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: stats
-    attributes:
-      label: Frigate stats
-      description: Output from frigate's /api/stats endpoint
-      render: json
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - Home Assistant OS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-        - Proxmox via Docker
-        - Proxmox via TTeck Script
-        - Windows WSL2
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: dropdown
-    id: object-detector
-    attributes:
-      label: Object Detector
-      options:
-        - Coral
-        - OpenVino
-        - TensorRT
-        - RKNN
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop or simple cut/paste is possible in this field
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/detector-support.yml

@@ -1,87 +0,0 @@
-title: "[Detector Support]: "
-labels: ["support", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form for support or questions related to Frigate's object detectors.
-
-        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-        - Proxmox via Docker
-        - Proxmox via TTeck Script
-        - Windows WSL2
-    validations:
-      required: true
-  - type: dropdown
-    id: object-detector
-    attributes:
-      label: Object Detector
-      options:
-        - Coral
-        - OpenVino
-        - TensorRT
-        - RKNN
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/general-support.yml

@@ -1,130 +0,0 @@
-title: "[Support]: "
-labels: ["support", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form for support for issues that don't fall into any specific category.
-
-        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: input
-    attributes:
-      label: What browser(s) are you using?
-      placeholder: Google Chrome 88.0.4324.150
-      description: >
-        Provide the full name and don't forget to add the version!
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: go2rtclogs
-    attributes:
-      label: Relevant go2rtc log output
-      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: ffprobe
-    attributes:
-      label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: stats
-    attributes:
-      label: Frigate stats
-      description: Output from frigate's /api/stats endpoint
-      render: json
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-        - Proxmox via Docker
-        - Proxmox via TTeck Script
-        - Windows WSL2
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: dropdown
-    id: object-detector
-    attributes:
-      label: Object Detector
-      options:
-        - Coral
-        - OpenVino
-        - TensorRT
-        - RKNN
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop for images is possible in this field
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/hardware-acceleration-support.yml

@@ -1,120 +0,0 @@
-title: "[HW Accel Support]: "
-labels: ["support", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form to submit a support request for hardware acceleration issues.
-
-        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: go2rtclogs
-    attributes:
-      label: Relevant go2rtc log output
-      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: ffprobe
-    attributes:
-      label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
-      render: shell
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-        - Proxmox via Docker
-        - Proxmox via TTeck Script
-        - Windows WSL2
-    validations:
-      required: true
-  - type: dropdown
-    id: object-detector
-    attributes:
-      label: Object Detector
-      options:
-        - Coral
-        - OpenVino
-        - TensorRT
-        - RKNN
-        - Other
-        - CPU (no coral)
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/question.yml

@@ -1,21 +0,0 @@
-title: "[Question]: "
-labels: ["question"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form for questions you have about Frigate.
-
-        Before submitting your question, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
-
-        **If you are looking for support, start a new discussion and use a support category.**
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-  - type: textarea
-    id: description
-    attributes:
-      label: "What is your question?"
-    validations:
-      required: true

.github/DISCUSSION_TEMPLATE/report-a-bug.yml

@@ -1,149 +0,0 @@
-title: "[Bug]: "
-labels: ["bug", "triage"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Use this form to submit a reproducible bug in Frigate or Frigate's UI.
-
-        Before submitting your bug report, please ask the AI with the "Ask AI" button on the [official documentation site][ai] about your issue, [search the discussions][discussions], look at recent open and closed [pull requests][prs], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your bug has already been fixed by the developers or reported by the community.
-
-        **If you are unsure if your issue is actually a bug or not, please submit a support request first.**
-
-        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
-        [prs]: https://www.github.com/blakeblackshear/frigate/pulls
-        [docs]: https://docs.frigate.video
-        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
-        [ai]: https://docs.frigate.video
-  - type: checkboxes
-    attributes:
-      label: Checklist
-      description: Please verify that you've followed these steps
-      options:
-        - label: I have updated to the latest available Frigate version.
-          required: true
-        - label: I have cleared the cache of my browser.
-          required: true
-        - label: I have tried a different browser to see if it is related to my browser.
-          required: true
-        - label: I have tried reproducing the issue in [incognito mode](https://www.computerworld.com/article/1719851/how-to-go-incognito-in-chrome-firefox-safari-and-edge.html) to rule out problems with any third party extensions or plugins I have installed.
-        - label: I have asked the AI at https://docs.frigate.video about my issue.
-          required: true
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-      description: Provide a clear and concise description of what the bug is.
-    validations:
-      required: true
-  - type: textarea
-    id: steps
-    attributes:
-      label: Steps to reproduce
-      description: |
-        Please tell us exactly how to reproduce your issue.
-        Provide clear and concise step by step instructions and add code snippets if needed.
-      value: |
-        1.
-        2.
-        3.
-        ...
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
-    validations:
-      required: true
-  - type: input
-    attributes:
-      label: In which browser(s) are you experiencing the issue with?
-      placeholder: Google Chrome 88.0.4324.150
-      description: >
-        Provide the full name and don't forget to add the version!
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: docker
-    attributes:
-      label: docker-compose file or Docker CLI command
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: frigatelogs
-    attributes:
-      label: Relevant Frigate log output
-      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: textarea
-    id: go2rtclogs
-    attributes:
-      label: Relevant go2rtc log output
-      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - Home Assistant OS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - Home Assistant Add-on
-        - Docker Compose
-        - Docker CLI
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: screenshots
-    attributes:
-      label: Screenshots of the Frigate UI's System metrics pages
-      description: Drag and drop for images is possible in this field. Please post screenshots of all tabs.
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/FUNDING.yml

@@ -1,4 +1 @@
-github:
-  - blakeblackshear
-  - NickM-27
-  - hawkeye217
+github: blakeblackshear

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,56 @@
+---
+name: Bug report or Support request
+about: ''
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+**Describe the bug**
+A clear and concise description of what your issue is.
+
+**Version of frigate**
+Output from `/version`
+
+**Config file**
+Include your full config file wrapped in triple back ticks.
+```yaml
+config here
+```
+
+**Frigate container logs**
+```
+Include relevant log output here
+```
+
+**Frigate stats**
+```json
+Output from frigate's /stats endpoint
+```
+
+**FFprobe from your camera**
+
+Run the following command and paste output below
+```
+ffprobe <stream_url>
+```
+
+**Screenshots**
+If applicable, add screenshots to help explain your problem.
+
+**Computer Hardware**
+ - OS: [e.g. Ubuntu, Windows]
+ - Install method: [e.g. Addon, Docker Compose, Docker Command]
+ - Virtualization: [e.g. Proxmox, Virtualbox]
+ - Coral Version: [e.g. USB, PCIe, None]
+ - Network Setup: [e.g. Wired, WiFi]
+
+**Camera Info:**
+ - Manufacturer: [e.g. Dahua]
+ - Model: [e.g. IPC-HDW5231R-ZE]
+ - Resolution: [e.g. 720p]
+ - FPS: [e.g. 5]
+
+**Additional context**
+Add any other context about the problem here.

.github/ISSUE_TEMPLATE/config.yml

@@ -1,8 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: Frigate Support
-    url: https://github.com/blakeblackshear/frigate/discussions/new/choose
-    about: Get support for setting up or troubleshooting Frigate.
-  - name: Frigate Bug Report
-    url: https://github.com/blakeblackshear/frigate/discussions/new/choose
-    about: Report a specific UI or backend bug.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -1,20 +0,0 @@
----
-name: Feature request
-about: Suggest an idea for this project
-title: ''
-labels: enhancement
-assignees: ''
-
----
-
-**Describe what you are trying to accomplish and why in non technical terms**
-I want to be able to ... so that I can ... 
-
-**Describe the solution you'd like**
-A clear and concise description of what you want to happen.
-
-**Describe alternatives you've considered**
-A clear and concise description of any alternative solutions or features you've considered.
-
-**Additional context**
-Add any other context or screenshots about the feature request here.

.github/actions/setup/action.yml

@@ -1,50 +0,0 @@
-name: 'Setup'
-description: 'Set up QEMU and Buildx'
-inputs:
-  GITHUB_TOKEN:
-    required: true
-outputs:
-  image-name:
-    value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ steps.create-short-sha.outputs.SHORT_SHA }}
-  cache-name:
-    value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:cache
-runs:
-  using: "composite"
-  steps:
-    # Stop docker so we can mount more space at /var/lib/docker
-    - name: Stop docker
-      run: sudo systemctl stop docker
-      shell: bash
-    # This creates a virtual volume at /var/lib/docker to maximize the size
-    # As of 2/14/2024, this results in 97G for docker images
-    - name: Maximize build space
-      uses: easimon/maximize-build-space@master
-      with:
-        remove-dotnet: 'true'
-        remove-android: 'true'
-        remove-haskell: 'true'
-        remove-codeql: 'true'
-        build-mount-path: '/var/lib/docker'
-    - name: Start docker
-      run: sudo systemctl start docker
-      shell: bash
-    - id: lowercaseRepo
-      uses: ASzc/change-string-case-action@v5
-      with:
-        string: ${{ github.repository }}
-    - name: Set up QEMU
-      uses: docker/setup-qemu-action@v3
-    - name: Set up Docker Buildx
-      uses: docker/setup-buildx-action@v3
-    - name: Log in to the Container registry
-      uses: docker/login-action@465a07811f14bebb1938fbed4728c6a1ff8901fc
-      with:
-        registry: ghcr.io
-        username: ${{ github.actor }}
-        password: ${{ inputs.GITHUB_TOKEN }}
-    - name: Create version file
-      run: make version
-      shell: bash
-    - id: create-short-sha
-      run: echo "SHORT_SHA=${GITHUB_SHA::7}" >> $GITHUB_OUTPUT
-      shell: bash

.github/dependabot.yml

@@ -1,40 +0,0 @@
-version: 2
-updates:
-  - package-ecosystem: "github-actions"
-    directory: "/"
-    schedule:
-      interval: daily
-    open-pull-requests-limit: 10
-    target-branch: dev
-  - package-ecosystem: "docker"
-    directory: "/docker"
-    schedule:
-      interval: daily
-    open-pull-requests-limit: 10
-    target-branch: dev
-  - package-ecosystem: "pip"
-    directory: "/docker/main"
-    schedule:
-      interval: daily
-    open-pull-requests-limit: 10
-    target-branch: dev
-  - package-ecosystem: "pip"
-    directory: "/docker/tensorrt"
-    schedule:
-      interval: daily
-    open-pull-requests-limit: 10
-    target-branch: dev
-  - package-ecosystem: "npm"
-    directory: "/web"
-    schedule:
-      interval: daily
-    open-pull-requests-limit: 10
-    target-branch: dev
-  - package-ecosystem: "npm"
-    directory: "/docs"
-    schedule:
-      interval: daily
-    allow:
-      - dependency-name: "@docusaurus/*"
-    open-pull-requests-limit: 10
-    target-branch: dev

.github/pull_request_template.md

@@ -1,39 +0,0 @@
-## Proposed change
-<!--
-  Thank you!
-
-  If you're introducing a new feature or significantly refactoring existing functionality,
-  we encourage you to start a discussion first. This helps ensure your idea aligns with
-  Frigate's development goals.
-
-  Describe what this pull request does and how it will benefit users of Frigate.
-  Please describe in detail any considerations, breaking changes, etc. that are
-  made in this pull request.
--->
-
-
-## Type of change
-
-- [ ] Dependency upgrade
-- [ ] Bugfix (non-breaking change which fixes an issue)
-- [ ] New feature
-- [ ] Breaking change (fix/feature causing existing functionality to break)
-- [ ] Code quality improvements to existing code
-- [ ] Documentation Update
-
-## Additional information
-
-- This PR fixes or closes issue: fixes #
-- This PR is related to issue:
-
-## Checklist
-
-<!--
-  Put an `x` in the boxes that apply.
--->
-
-- [ ] The code change is tested and works locally.
-- [ ] Local tests pass. **Your PR cannot be merged unless tests pass**
-- [ ] There is no commented out code in this PR.
-- [ ] UI changes including text have used i18n keys and have been added to the `en` locale.
-- [ ] The code has been formatted using Ruff (`ruff format frigate`)

.github/workflows/ci.yml

@@ -1,227 +0,0 @@
-name: CI
-
-on:
-  workflow_dispatch:
-  push:
-    branches:
-      - dev
-      - master
-    paths-ignore:
-      - "docs/**"
-
-# only run the latest commit to avoid cache overwrites
-concurrency:
-  group: ${{ github.ref }}
-  cancel-in-progress: true
-
-env:
-  PYTHON_VERSION: 3.9
-
-jobs:
-  amd64_build:
-    runs-on: ubuntu-22.04
-    name: AMD64 Build
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push amd64 standard build
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: docker/main/Dockerfile
-          push: true
-          platforms: linux/amd64
-          target: frigate
-          tags: ${{ steps.setup.outputs.image-name }}-amd64
-          cache-from: type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64
-          cache-to: type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64,mode=max
-  arm64_build:
-    runs-on: ubuntu-22.04-arm
-    name: ARM Build
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push arm64 standard build
-        uses: docker/build-push-action@v5
-        with:
-          context: .
-          file: docker/main/Dockerfile
-          push: true
-          platforms: linux/arm64
-          target: frigate
-          tags: |
-            ${{ steps.setup.outputs.image-name }}-standard-arm64
-          cache-from: type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64
-      - name: Build and push RPi build
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: rpi
-          files: docker/rpi/rpi.hcl
-          set: |
-            rpi.tags=${{ steps.setup.outputs.image-name }}-rpi
-            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64
-            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64,mode=max
-  jetson_jp6_build:
-    runs-on: ubuntu-22.04-arm
-    name: Jetson Jetpack 6
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push TensorRT (Jetson, Jetpack 6)
-        env:
-          ARCH: arm64
-          BASE_IMAGE: nvcr.io/nvidia/tensorrt:23.12-py3-igpu
-          SLIM_BASE: nvcr.io/nvidia/tensorrt:23.12-py3-igpu
-          TRT_BASE: nvcr.io/nvidia/tensorrt:23.12-py3-igpu
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: tensorrt
-          files: docker/tensorrt/trt.hcl
-          set: |
-            tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt-jp6
-            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp6
-            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp6,mode=max
-  amd64_extra_builds:
-    runs-on: ubuntu-22.04
-    name: AMD64 Extra Build
-    needs:
-      - amd64_build
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push TensorRT (x86 GPU)
-        env:
-          COMPUTE_LEVEL: "50 60 70 80 90"
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: tensorrt
-          files: docker/tensorrt/trt.hcl
-          set: |
-            tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt
-            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-tensorrt
-            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-tensorrt,mode=max
-      - name: AMD/ROCm general build
-        env:
-          AMDGPU: gfx
-          HSA_OVERRIDE: 0
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: rocm
-          files: docker/rocm/rocm.hcl
-          set: |
-            rocm.tags=${{ steps.setup.outputs.image-name }}-rocm
-            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-rocm,mode=max
-            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-rocm
-  arm64_extra_builds:
-    runs-on: ubuntu-22.04-arm
-    name: ARM Extra Build
-    needs:
-      - arm64_build
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push Rockchip build
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: rk
-          files: docker/rockchip/rk.hcl
-          set: |
-            rk.tags=${{ steps.setup.outputs.image-name }}-rk
-            *.cache-from=type=gha
-  synaptics_build:
-    runs-on: ubuntu-22.04-arm
-    name: Synaptics Build
-    needs:
-      - arm64_build
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push Synaptics build
-        uses: docker/bake-action@v6
-        with:
-          source: .
-          push: true
-          targets: synaptics
-          files: docker/synaptics/synaptics.hcl
-          set: |
-            synaptics.tags=${{ steps.setup.outputs.image-name }}-synaptics
-            *.cache-from=type=gha
-  # The majority of users running arm64 are rpi users, so the rpi
-  # build should be the primary arm64 image
-  assemble_default_build:
-    runs-on: ubuntu-22.04
-    name: Assemble and push default build
-    needs:
-      - amd64_build
-      - arm64_build
-    steps:
-      - id: lowercaseRepo
-        uses: ASzc/change-string-case-action@v6
-        with:
-          string: ${{ github.repository }}
-      - name: Log in to the Container registry
-        uses: docker/login-action@184bdaa0721073962dff0199f1fb9940f07167d1
-        with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-      - name: Create short sha
-        run: echo "SHORT_SHA=${GITHUB_SHA::7}" >> $GITHUB_ENV
-      - uses: int128/docker-manifest-create-action@v2
-        with:
-          tags: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}
-          sources: |
-            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}-amd64
-            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}-rpi

.github/workflows/pull_request.yml

@@ -1,95 +0,0 @@
-name: On pull request
-
-on:
-  pull_request:
-    paths-ignore:
-      - "docs/**"
-      - ".github/*.yml"
-      - ".github/DISCUSSION_TEMPLATE/**"
-      - ".github/ISSUE_TEMPLATE/**"
-
-env:
-  DEFAULT_PYTHON: 3.11
-
-jobs:
-  web_lint:
-    name: Web - Lint
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - uses: actions/setup-node@master
-        with:
-          node-version: 16.x
-      - run: npm install
-        working-directory: ./web
-      - name: Lint
-        run: npm run lint
-        working-directory: ./web
-
-  web_test:
-    name: Web - Test
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - uses: actions/setup-node@master
-        with:
-          node-version: 20.x
-      - run: npm install
-        working-directory: ./web
-      - name: Build web
-        run: npm run build
-        working-directory: ./web
-      # - name: Test
-      #   run: npm run test
-      #   working-directory: ./web
-
-  python_checks:
-    runs-on: ubuntu-latest
-    name: Python Checks
-    steps:
-      - name: Check out the repository
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v5.4.0
-        with:
-          python-version: ${{ env.DEFAULT_PYTHON }}
-      - name: Install requirements
-        run: |
-          python3 -m pip install -U pip
-          python3 -m pip install -r docker/main/requirements-dev.txt
-      - name: Check formatting
-        run: |
-          ruff format --check --diff frigate migrations docker *.py
-      - name: Check lint
-        run: |
-          ruff check frigate migrations docker *.py
-
-  python_tests:
-    runs-on: ubuntu-latest
-    name: Python Tests
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - uses: actions/setup-node@master
-        with:
-          node-version: 20.x
-      - name: Install devcontainer cli
-        run: npm install --global @devcontainers/cli
-      - name: Build devcontainer
-        env:
-          DOCKER_BUILDKIT: "1"
-        run: devcontainer build --workspace-folder .
-      - name: Start devcontainer
-        run: devcontainer up --workspace-folder .
-      - name: Run mypy in devcontainer
-        run: devcontainer exec --workspace-folder . bash -lc "python3 -u -m mypy --config-file frigate/mypy.ini frigate"
-      - name: Run unit tests in devcontainer
-        run: devcontainer exec --workspace-folder . bash -lc "python3 -u -m unittest"

.github/workflows/push.yml

@@ -0,0 +1,28 @@
+name: On push
+
+on:
+  push:
+    branches:
+      - master
+      - release-0.8.0
+
+jobs:
+  deploy-docs:
+    name: Deploy docs
+    runs-on: ubuntu-latest
+    defaults:
+      run:
+        working-directory: ./docs
+    steps:
+      - uses: actions/checkout@master
+      - uses: actions/setup-node@master
+        with:
+          node-version: 12.x
+      - run: npm install
+      - name: Build docs
+        run: npm run build
+      - name: Deploy documentation
+        uses: peaceiris/actions-gh-pages@v3
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          publish_dir: ./docs/build

.github/workflows/release.yml

@@ -1,52 +0,0 @@
-name: On release
-
-on:
-  workflow_dispatch:
-  release:
-    types: [published]
-
-jobs:
-  release:
-    runs-on: ubuntu-latest
-
-    steps:
-      - uses: actions/checkout@v5
-        with:
-          persist-credentials: false
-      - id: lowercaseRepo
-        uses: ASzc/change-string-case-action@v6
-        with:
-          string: ${{ github.repository }}
-      - name: Log in to the Container registry
-        uses: docker/login-action@184bdaa0721073962dff0199f1fb9940f07167d1
-        with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-      - name: Create tag variables
-        env:
-          TAG: ${{ github.ref_name }}
-          LOWERCASE_REPO: ${{ steps.lowercaseRepo.outputs.lowercase }}
-        run: |
-          BUILD_TYPE=$([[ "${TAG}" =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]] && echo "stable" || echo "beta")
-          echo "BUILD_TYPE=${BUILD_TYPE}" >> $GITHUB_ENV
-          echo "BASE=ghcr.io/${LOWERCASE_REPO}" >> $GITHUB_ENV
-          echo "BUILD_TAG=${GITHUB_SHA::7}" >> $GITHUB_ENV
-          echo "CLEAN_VERSION=$(echo ${GITHUB_REF##*/} | tr '[:upper:]' '[:lower:]' | sed 's/^[v]//')" >> $GITHUB_ENV
-      - name: Tag and push the main image
-        run: |
-          VERSION_TAG=${BASE}:${CLEAN_VERSION}
-          STABLE_TAG=${BASE}:stable
-          PULL_TAG=${BASE}:${BUILD_TAG}
-          docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG} docker://${VERSION_TAG}
-          for variant in standard-arm64 tensorrt tensorrt-jp6 rk rocm; do
-            docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG}-${variant} docker://${VERSION_TAG}-${variant}
-          done
-
-          # stable tag
-          if [[ "${BUILD_TYPE}" == "stable" ]]; then
-            docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG} docker://${STABLE_TAG}
-            for variant in standard-arm64 tensorrt tensorrt-jp6 rk rocm; do
-              docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG}-${variant} docker://${STABLE_TAG}-${variant}
-            done
-          fi

.github/workflows/stale.yml

@@ -1,42 +0,0 @@
-# Close Stale Issues
-# Warns and then closes issues and PRs that have had no activity for a specified amount of time.
-# https://github.com/actions/stale
-
-name: "Stalebot"
-on:
-  schedule:
-    - cron: "0 0 * * *" # run stalebot once a day
-
-jobs:
-  stale:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/stale@main
-        id: stale
-        with:
-          stale-issue-message: "This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions."
-          close-issue-message: ""
-          days-before-stale: 30
-          days-before-close: 3
-          exempt-draft-pr: true
-          exempt-issue-labels: "pinned,security"
-          exempt-pr-labels: "pinned,security,dependencies"
-          operations-per-run: 120
-      - name: Print outputs
-        env:
-          STALE_OUTPUT: ${{ join(steps.stale.outputs.*, ',') }}
-        run: echo "$STALE_OUTPUT"
-
-  # clean_ghcr:
-  #   name: Delete outdated dev container images
-  #   runs-on: ubuntu-latest
-  #   steps:
-  #     - name: Delete old images
-  #       uses: snok/container-retention-policy@v2
-  #       with:
-  #         image-names: dev-*
-  #         cut-off: 60 days ago UTC
-  #         keep-at-least: 5
-  #         account-type: personal
-  #         token: ${{ secrets.GITHUB_TOKEN }}
-  #         token-type: github-token

.gitignore

@@ -1,21 +1,11 @@
 .DS_Store
-__pycache__
-.mypy_cache
-*.swp
+*.pyc
 debug
-.vscode/*
-!.vscode/launch.json
-config/*
-!config/*.example
+.vscode
+config/config.yml
 models
 *.mp4
 *.db
-*.csv
 frigate/version.py
 web/build
 web/node_modules
-web/coverage
-core
-!/web/**/*.ts
-.idea/*
-.ipynb_checkpoints

.pylintrc

@@ -1,588 +0,0 @@
-[MASTER]
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code.
-extension-pkg-whitelist=
-
-# Specify a score threshold to be exceeded before program exits with error.
-fail-under=10.0
-
-# Add files or directories to the blacklist. They should be base names, not
-# paths.
-ignore=CVS
-
-# Add files or directories matching the regex patterns to the blacklist. The
-# regex matches against base names, not paths.
-ignore-patterns=
-
-# Python code to execute, usually for sys.path manipulation such as
-# pygtk.require().
-#init-hook=
-
-# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
-# number of processors available to use.
-jobs=1
-
-# Control the amount of potential inferred values when inferring a single
-# object. This can help the performance when dealing with large functions or
-# complex, nested conditions.
-limit-inference-results=100
-
-# List of plugins (as comma separated values of python module names) to load,
-# usually to register additional checkers.
-load-plugins=
-
-# Pickle collected data for later comparisons.
-persistent=yes
-
-# When enabled, pylint would attempt to guess common misconfiguration and emit
-# user-friendly hints instead of false-positive error messages.
-suggestion-mode=yes
-
-# Allow loading of arbitrary C extensions. Extensions are imported into the
-# active Python interpreter and may run arbitrary code.
-unsafe-load-any-extension=no
-
-
-[MESSAGES CONTROL]
-
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
-confidence=
-
-# Disable the message, report, category or checker with the given id(s). You
-# can either give multiple identifiers separated by comma (,) or put this
-# option multiple times (only on the command line, not in the configuration
-# file where it should appear only once). You can also use "--disable=all" to
-# disable everything first and then reenable specific checks. For example, if
-# you want to run only the similarities checker, you can use "--disable=all
-# --enable=similarities". If you want to run only the classes checker, but have
-# no Warning level messages displayed, use "--disable=all --enable=classes
-# --disable=W".
-disable=print-statement,
-        parameter-unpacking,
-        unpacking-in-except,
-        old-raise-syntax,
-        backtick,
-        long-suffix,
-        old-ne-operator,
-        old-octal-literal,
-        import-star-module-level,
-        non-ascii-bytes-literal,
-        raw-checker-failed,
-        bad-inline-option,
-        locally-disabled,
-        file-ignored,
-        suppressed-message,
-        useless-suppression,
-        deprecated-pragma,
-        use-symbolic-message-instead,
-        apply-builtin,
-        basestring-builtin,
-        buffer-builtin,
-        cmp-builtin,
-        coerce-builtin,
-        execfile-builtin,
-        file-builtin,
-        long-builtin,
-        raw_input-builtin,
-        reduce-builtin,
-        standarderror-builtin,
-        unicode-builtin,
-        xrange-builtin,
-        coerce-method,
-        delslice-method,
-        getslice-method,
-        setslice-method,
-        no-absolute-import,
-        old-division,
-        dict-iter-method,
-        dict-view-method,
-        next-method-called,
-        metaclass-assignment,
-        indexing-exception,
-        raising-string,
-        reload-builtin,
-        oct-method,
-        hex-method,
-        nonzero-method,
-        cmp-method,
-        input-builtin,
-        round-builtin,
-        intern-builtin,
-        unichr-builtin,
-        map-builtin-not-iterating,
-        zip-builtin-not-iterating,
-        range-builtin-not-iterating,
-        filter-builtin-not-iterating,
-        using-cmp-argument,
-        eq-without-hash,
-        div-method,
-        idiv-method,
-        rdiv-method,
-        exception-message-attribute,
-        invalid-str-codec,
-        sys-max-int,
-        bad-python3-import,
-        deprecated-string-function,
-        deprecated-str-translate-call,
-        deprecated-itertools-function,
-        deprecated-types-field,
-        next-method-defined,
-        dict-items-not-iterating,
-        dict-keys-not-iterating,
-        dict-values-not-iterating,
-        deprecated-operator-function,
-        deprecated-urllib-function,
-        xreadlines-attribute,
-        deprecated-sys-function,
-        exception-escape,
-        comprehension-escape
-
-# Enable the message, report, category or checker with the given id(s). You can
-# either give multiple identifier separated by comma (,) or put this option
-# multiple time (only on the command line, not in the configuration file where
-# it should appear only once). See also the "--disable" option for examples.
-enable=c-extension-no-member
-
-
-[REPORTS]
-
-# Python expression which should return a score less than or equal to 10. You
-# have access to the variables 'error', 'warning', 'refactor', and 'convention'
-# which contain the number of messages in each category, as well as 'statement'
-# which is the total number of statements analyzed. This score is used by the
-# global evaluation report (RP0004).
-evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details.
-#msg-template=
-
-# Set the output format. Available formats are text, parseable, colorized, json
-# and msvs (visual studio). You can also give a reporter class, e.g.
-# mypackage.mymodule.MyReporterClass.
-output-format=text
-
-# Tells whether to display a full report or only the messages.
-reports=no
-
-# Activate the evaluation score.
-score=yes
-
-
-[REFACTORING]
-
-# Maximum number of nested blocks for function / method body
-max-nested-blocks=5
-
-# Complete name of functions that never returns. When checking for
-# inconsistent-return-statements if a never returning function is called then
-# it will be considered as an explicit return statement and no message will be
-# printed.
-never-returning-functions=sys.exit
-
-
-[SPELLING]
-
-# Limits count of emitted suggestions for spelling mistakes.
-max-spelling-suggestions=4
-
-# Spelling dictionary name. Available dictionaries: none. To make it work,
-# install the python-enchant package.
-spelling-dict=
-
-# List of comma separated words that should not be checked.
-spelling-ignore-words=
-
-# A path to a file that contains the private dictionary; one word per line.
-spelling-private-dict-file=
-
-# Tells whether to store unknown words to the private dictionary (see the
-# --spelling-private-dict-file option) instead of raising a message.
-spelling-store-unknown-words=no
-
-
-[TYPECHECK]
-
-# List of decorators that produce context managers, such as
-# contextlib.contextmanager. Add to this list to register other decorators that
-# produce valid context managers.
-contextmanager-decorators=contextlib.contextmanager
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E1101 when accessed. Python regular
-# expressions are accepted.
-generated-members=
-
-# Tells whether missing members accessed in mixin class should be ignored. A
-# mixin class is detected if its name ends with "mixin" (case insensitive).
-ignore-mixin-members=yes
-
-# Tells whether to warn about missing members when the owner of the attribute
-# is inferred to be None.
-ignore-none=yes
-
-# This flag controls whether pylint should warn about no-member and similar
-# checks whenever an opaque object is returned when inferring. The inference
-# can return multiple potential results while evaluating a Python object, but
-# some branches might not be evaluated, which results in partial inference. In
-# that case, it might be useful to still emit no-member and other checks for
-# the rest of the inferred objects.
-ignore-on-opaque-inference=yes
-
-# List of class names for which member attributes should not be checked (useful
-# for classes with dynamically set attributes). This supports the use of
-# qualified names.
-ignored-classes=optparse.Values,thread._local,_thread._local
-
-# List of module names for which member attributes should not be checked
-# (useful for modules/projects where namespaces are manipulated during runtime
-# and thus existing member attributes cannot be deduced by static analysis). It
-# supports qualified module names, as well as Unix pattern matching.
-ignored-modules=
-
-# Show a hint with possible names when a member name was not found. The aspect
-# of finding the hint is based on edit distance.
-missing-member-hint=yes
-
-# The minimum edit distance a name should have in order to be considered a
-# similar match for a missing member name.
-missing-member-hint-distance=1
-
-# The total number of similar names that should be taken in consideration when
-# showing a hint for a missing member.
-missing-member-max-choices=1
-
-# List of decorators that change the signature of a decorated function.
-signature-mutators=
-
-
-[STRING]
-
-# This flag controls whether inconsistent-quotes generates a warning when the
-# character used as a quote delimiter is used inconsistently within a module.
-check-quote-consistency=no
-
-# This flag controls whether the implicit-str-concat should generate a warning
-# on implicit string concatenation in sequences defined over several lines.
-check-str-concat-over-line-jumps=no
-
-
-[FORMAT]
-
-# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
-expected-line-ending-format=
-
-# Regexp for a line that is allowed to be longer than the limit.
-ignore-long-lines=^\s*(# )?<?https?://\S+>?$
-
-# Number of spaces of indent required inside a hanging or continued line.
-indent-after-paren=4
-
-# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
-# tab).
-indent-string='    '
-
-# Maximum number of characters on a single line.
-max-line-length=100
-
-# Maximum number of lines in a module.
-max-module-lines=1000
-
-# Allow the body of a class to be on the same line as the declaration if body
-# contains single statement.
-single-line-class-stmt=no
-
-# Allow the body of an if to be on the same line as the test if there is no
-# else.
-single-line-if-stmt=no
-
-
-[SIMILARITIES]
-
-# Ignore comments when computing similarities.
-ignore-comments=yes
-
-# Ignore docstrings when computing similarities.
-ignore-docstrings=yes
-
-# Ignore imports when computing similarities.
-ignore-imports=no
-
-# Minimum lines number of a similarity.
-min-similarity-lines=4
-
-
-[MISCELLANEOUS]
-
-# List of note tags to take in consideration, separated by a comma.
-notes=FIXME,
-      XXX,
-      TODO
-
-# Regular expression of note tags to take in consideration.
-#notes-rgx=
-
-
-[BASIC]
-
-# Naming style matching correct argument names.
-argument-naming-style=snake_case
-
-# Regular expression matching correct argument names. Overrides argument-
-# naming-style.
-#argument-rgx=
-
-# Naming style matching correct attribute names.
-attr-naming-style=snake_case
-
-# Regular expression matching correct attribute names. Overrides attr-naming-
-# style.
-#attr-rgx=
-
-# Bad variable names which should always be refused, separated by a comma.
-bad-names=foo,
-          bar,
-          baz,
-          toto,
-          tutu,
-          tata
-
-# Bad variable names regexes, separated by a comma. If names match any regex,
-# they will always be refused
-bad-names-rgxs=
-
-# Naming style matching correct class attribute names.
-class-attribute-naming-style=any
-
-# Regular expression matching correct class attribute names. Overrides class-
-# attribute-naming-style.
-#class-attribute-rgx=
-
-# Naming style matching correct class names.
-class-naming-style=PascalCase
-
-# Regular expression matching correct class names. Overrides class-naming-
-# style.
-#class-rgx=
-
-# Naming style matching correct constant names.
-const-naming-style=UPPER_CASE
-
-# Regular expression matching correct constant names. Overrides const-naming-
-# style.
-#const-rgx=
-
-# Minimum line length for functions/classes that require docstrings, shorter
-# ones are exempt.
-docstring-min-length=-1
-
-# Naming style matching correct function names.
-function-naming-style=snake_case
-
-# Regular expression matching correct function names. Overrides function-
-# naming-style.
-#function-rgx=
-
-# Good variable names which should always be accepted, separated by a comma.
-good-names=i,
-           j,
-           k,
-           ex,
-           Run,
-           _
-
-# Good variable names regexes, separated by a comma. If names match any regex,
-# they will always be accepted
-good-names-rgxs=
-
-# Include a hint for the correct naming format with invalid-name.
-include-naming-hint=no
-
-# Naming style matching correct inline iteration names.
-inlinevar-naming-style=any
-
-# Regular expression matching correct inline iteration names. Overrides
-# inlinevar-naming-style.
-#inlinevar-rgx=
-
-# Naming style matching correct method names.
-method-naming-style=snake_case
-
-# Regular expression matching correct method names. Overrides method-naming-
-# style.
-#method-rgx=
-
-# Naming style matching correct module names.
-module-naming-style=snake_case
-
-# Regular expression matching correct module names. Overrides module-naming-
-# style.
-#module-rgx=
-
-# Colon-delimited sets of names that determine each other's naming style when
-# the name regexes allow several styles.
-name-group=
-
-# Regular expression which should only match function or class names that do
-# not require a docstring.
-no-docstring-rgx=^_
-
-# List of decorators that produce properties, such as abc.abstractproperty. Add
-# to this list to register other decorators that produce valid properties.
-# These decorators are taken in consideration only for invalid-name.
-property-classes=abc.abstractproperty
-
-# Naming style matching correct variable names.
-variable-naming-style=snake_case
-
-# Regular expression matching correct variable names. Overrides variable-
-# naming-style.
-#variable-rgx=
-
-
-[VARIABLES]
-
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid defining new builtins when possible.
-additional-builtins=
-
-# Tells whether unused global variables should be treated as a violation.
-allow-global-unused-variables=yes
-
-# List of strings which can identify a callback function by name. A callback
-# name must start or end with one of those strings.
-callbacks=cb_,
-          _cb
-
-# A regular expression matching the name of dummy variables (i.e. expected to
-# not be used).
-dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
-
-# Argument names that match this expression will be ignored. Default to name
-# with leading underscore.
-ignored-argument-names=_.*|^ignored_|^unused_
-
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
-
-# List of qualified module names which can have objects that can redefine
-# builtins.
-redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io
-
-
-[LOGGING]
-
-# The type of string formatting that logging methods do. `old` means using %
-# formatting, `new` is for `{}` formatting.
-logging-format-style=fstr
-
-# Logging modules to check that the string format arguments are in logging
-# function parameter format.
-logging-modules=logging
-
-
-[DESIGN]
-
-# Maximum number of arguments for function / method.
-max-args=5
-
-# Maximum number of attributes for a class (see R0902).
-max-attributes=7
-
-# Maximum number of boolean expressions in an if statement (see R0916).
-max-bool-expr=5
-
-# Maximum number of branch for function / method body.
-max-branches=12
-
-# Maximum number of locals for function / method body.
-max-locals=15
-
-# Maximum number of parents for a class (see R0901).
-max-parents=7
-
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
-
-# Maximum number of return / yield for function / method body.
-max-returns=6
-
-# Maximum number of statements in function / method body.
-max-statements=50
-
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=2
-
-
-[CLASSES]
-
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,
-                      __new__,
-                      setUp,
-                      __post_init__
-
-# List of member names, which should be excluded from the protected access
-# warning.
-exclude-protected=_asdict,
-                  _fields,
-                  _replace,
-                  _source,
-                  _make
-
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
-
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=cls
-
-
-[IMPORTS]
-
-# List of modules that can be imported at any level, not just the top level
-# one.
-allow-any-import-level=
-
-# Allow wildcard imports from modules that define __all__.
-allow-wildcard-with-all=no
-
-# Analyse import fallback blocks. This can be used to support both Python 2 and
-# 3 compatible code, which means that the block might have code that exists
-# only in one or another interpreter, leading to false positives when analysed.
-analyse-fallback-blocks=no
-
-# Deprecated modules which should not be used, separated by a comma.
-deprecated-modules=optparse,tkinter.tix
-
-# Create a graph of external dependencies in the given file (report RP0402 must
-# not be disabled).
-ext-import-graph=
-
-# Create a graph of every (i.e. internal and external) dependencies in the
-# given file (report RP0402 must not be disabled).
-import-graph=
-
-# Create a graph of internal dependencies in the given file (report RP0402 must
-# not be disabled).
-int-import-graph=
-
-# Force import order to recognize a module as part of the standard
-# compatibility libraries.
-known-standard-library=
-
-# Force import order to recognize a module as part of a third party library.
-known-third-party=enchant
-
-# Couples of modules and preferred modules, separated by a comma.
-preferred-modules=
-
-
-[EXCEPTIONS]
-
-# Exceptions that will emit a warning when being caught. Defaults to
-# "BaseException, Exception".
-overgeneral-exceptions=BaseException,
-                       Exception

.vscode/launch.json

@@ -1,11 +0,0 @@
-{
-  "version": "0.2.0",
-  "configurations": [
-    {
-      "name": "Python: Launch Frigate",
-      "type": "debugpy",
-      "request": "launch",
-      "module": "frigate"
-    }
-  ]
-}

CODEOWNERS

@@ -1,7 +0,0 @@
-# Community-supported boards
-/docker/tensorrt/ @madsciencetist @NateMeyer
-/docker/tensorrt/*arm64* @madsciencetist
-/docker/tensorrt/*jetson* @madsciencetist
-/docker/rockchip/ @MarcA711
-/docker/rocm/ @harakas
-/docker/hailo8l/ @spanner3003

Makefile

@@ -1,59 +1,59 @@
-default_target: local
+default_target: amd64_frigate
 
 COMMIT_HASH := $(shell git log -1 --pretty=format:"%h"|tail -1)
-VERSION = 0.17.0
-IMAGE_REPO ?= ghcr.io/blakeblackshear/frigate
-GITHUB_REF_NAME ?= $(shell git rev-parse --abbrev-ref HEAD)
-BOARDS= #Initialized empty
-
-include docker/*/*.mk
-
-build-boards: $(BOARDS:%=build-%)
-
-push-boards: $(BOARDS:%=push-%)
 
 version:
-	echo 'VERSION = "$(VERSION)-$(COMMIT_HASH)"' > frigate/version.py
+	echo "VERSION='0.8.0-$(COMMIT_HASH)'" > frigate/version.py
 
-local: version
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-		--tag frigate:latest \
-		--load
+web:
+	docker build --tag frigate-web --file docker/Dockerfile.web web/
 
-debug: version
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-	    --build-arg DEBUG=true \
-		--tag frigate:latest \
-		--load
+amd64_wheels:
+	docker build --tag blakeblackshear/frigate-wheels:1.0.1-amd64 --file docker/Dockerfile.wheels .
 
-amd64:
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-		--tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) \
-		--platform linux/amd64
+amd64_ffmpeg:
+	docker build --tag blakeblackshear/frigate-ffmpeg:1.1.0-amd64 --file docker/Dockerfile.ffmpeg.amd64 .
 
-arm64:
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-		--tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) \
-		--platform linux/arm64
+amd64_frigate: version web
+	docker build --tag frigate-base --build-arg ARCH=amd64 --build-arg FFMPEG_VERSION=1.1.0 --build-arg WHEELS_VERSION=1.0.1 --file docker/Dockerfile.base .
+	docker build --tag frigate --file docker/Dockerfile.amd64 .
 
-build: version amd64 arm64
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-		--tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) \
-		--platform linux/arm64/v8,linux/amd64
+amd64_all: amd64_wheels amd64_ffmpeg amd64_frigate
 
-push: push-boards
-	docker buildx build --target=frigate --file docker/main/Dockerfile . \
-		--tag $(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH) \
-		--platform linux/arm64/v8,linux/amd64 \
-		--push
+amd64nvidia_wheels:
+	docker build --tag blakeblackshear/frigate-wheels:1.0.1-amd64nvidia --file docker/Dockerfile.wheels .
 
-run: local
-	docker run --rm --publish=5000:5000 --volume=${PWD}/config:/config frigate:latest
+amd64nvidia_ffmpeg:
+	docker build --tag blakeblackshear/frigate-ffmpeg:1.0.0-amd64nvidia --file docker/Dockerfile.ffmpeg.amd64nvidia .
 
-run_tests: local
-	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest \
-		python3 -u -m unittest
-	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest \
-		python3 -u -m mypy --config-file frigate/mypy.ini frigate
+amd64nvidia_frigate: version web
+	docker build --tag frigate-base --build-arg ARCH=amd64nvidia --build-arg FFMPEG_VERSION=1.0.0 --build-arg WHEELS_VERSION=1.0.1 --file docker/Dockerfile.base .
+	docker build --tag frigate --file docker/Dockerfile.amd64nvidia .
 
-.PHONY: run_tests
+amd64nvidia_all: amd64nvidia_wheels amd64nvidia_ffmpeg amd64nvidia_frigate
+
+aarch64_wheels:
+	docker build --tag blakeblackshear/frigate-wheels:1.0.1-aarch64 --file docker/Dockerfile.wheels .
+
+aarch64_ffmpeg:
+	docker build --tag blakeblackshear/frigate-ffmpeg:1.0.0-aarch64 --file docker/Dockerfile.ffmpeg.aarch64 .
+
+aarch64_frigate: version web
+	docker build --tag frigate-base --build-arg ARCH=aarch64 --build-arg FFMPEG_VERSION=1.0.0 --build-arg WHEELS_VERSION=1.0.1 --file docker/Dockerfile.base .
+	docker build --tag frigate --file docker/Dockerfile.aarch64 .
+
+armv7_all: armv7_wheels armv7_ffmpeg armv7_frigate
+
+armv7_wheels:
+	docker build --tag blakeblackshear/frigate-wheels:1.0.1-armv7 --file docker/Dockerfile.wheels .
+
+armv7_ffmpeg:
+	docker build --tag blakeblackshear/frigate-ffmpeg:1.0.0-armv7 --file docker/Dockerfile.ffmpeg.armv7 .
+
+armv7_frigate: version web
+	docker build --tag frigate-base --build-arg ARCH=armv7 --build-arg FFMPEG_VERSION=1.0.0 --build-arg WHEELS_VERSION=1.0.1 --file docker/Dockerfile.base .
+	docker build --tag frigate --file docker/Dockerfile.armv7 .
+
+armv7_all: armv7_wheels armv7_ffmpeg armv7_frigate
+
+.PHONY: web

README.md

@@ -4,65 +4,35 @@
 
 # Frigate - NVR With Realtime Object Detection for IP Cameras
 
-<a href="https://hosted.weblate.org/engage/frigate-nvr/">
-<img src="https://hosted.weblate.org/widget/frigate-nvr/language-badge.svg" alt="Translation status" />
-</a>
+A complete and local NVR designed for HomeAssistant with AI object detection. Uses OpenCV and Tensorflow to perform realtime object detection locally for IP cameras.
 
-\[English\] | [简体中文](https://github.com/blakeblackshear/frigate/blob/dev/README_CN.md)
+Use of a [Google Coral Accelerator](https://coral.ai/products/) is optional, but highly recommended. The Coral will outperform even the best CPUs and can process 100+ FPS with very little overhead.
 
-A complete and local NVR designed for [Home Assistant](https://www.home-assistant.io) with AI object detection. Uses OpenCV and Tensorflow to perform realtime object detection locally for IP cameras.
-
-Use of a GPU or AI accelerator such as a [Google Coral](https://coral.ai/products/) or [Hailo](https://hailo.ai/) is highly recommended. AI accelerators will outperform even the best CPUs with very little overhead.
-
-- Tight integration with Home Assistant via a [custom component](https://github.com/blakeblackshear/frigate-hass-integration)
+- Tight integration with HomeAssistant via a [custom component](https://github.com/blakeblackshear/frigate-hass-integration)
 - Designed to minimize resource use and maximize performance by only looking for objects when and where it is necessary
 - Leverages multiprocessing heavily with an emphasis on realtime over processing every frame
 - Uses a very low overhead motion detection to determine where to run object detection
 - Object detection with TensorFlow runs in separate processes for maximum FPS
 - Communicates over MQTT for easy integration into other systems
-- Records video with retention settings based on detected objects
+- Records video clips of detected objects
 - 24/7 recording
-- Re-streaming via RTSP to reduce the number of connections to your camera
-- WebRTC & MSE support for low-latency live view
+- Re-streaming via RTMP to reduce the number of connections to your camera
 
 ## Documentation
 
-View the documentation at https://docs.frigate.video
-
-## Donations
-
-If you would like to make a donation to support development, please use [Github Sponsors](https://github.com/sponsors/blakeblackshear).
+View the documentation at https://blakeblackshear.github.io/frigate
 
 ## Screenshots
-
-### Live dashboard
-
+Integration into HomeAssistant
 <div>
-<img width="800" alt="Live dashboard" src="https://github.com/blakeblackshear/frigate/assets/569905/5e713cb9-9db5-41dc-947a-6937c3bc376e">
+<a href="docs/static/img/media_browser.png"><img src="docs/static/img/media_browser.png" height=400></a>
+<a href="docs/static/img/notification.png"><img src="docs/static/img/notification.png" height=400></a>
 </div>
 
-### Streamlined review workflow
-
+Also comes with a builtin UI:
 <div>
-<img width="800" alt="Streamlined review workflow" src="https://github.com/blakeblackshear/frigate/assets/569905/6fed96e8-3b18-40e5-9ddc-31e6f3c9f2ff">
+<a href="docs/static/img/home-ui.png"><img src="docs/static/img/home-ui.png" height=400></a>
+<a href="docs/static/img/camera-ui.png"><img src="docs/static/img/camera-ui.png" height=400></a>
 </div>
 
-### Multi-camera scrubbing
-
-<div>
-<img width="800" alt="Multi-camera scrubbing" src="https://github.com/blakeblackshear/frigate/assets/569905/d6788a15-0eeb-4427-a8d4-80b93cae3d74">
-</div>
-
-### Built-in mask and zone editor
-
-<div>
-<img width="800" alt="Multi-camera scrubbing" src="https://github.com/blakeblackshear/frigate/assets/569905/d7885fc3-bfe6-452f-b7d0-d957cb3e31f5">
-</div>
-
-## Translations
-
-We use [Weblate](https://hosted.weblate.org/projects/frigate-nvr/) to support language translations. Contributions are always welcome.
-
-<a href="https://hosted.weblate.org/engage/frigate-nvr/">
-<img src="https://hosted.weblate.org/widget/frigate-nvr/multi-auto.svg" alt="Translation status" />
-</a>
+![Events](docs/static/img/events-ui.png)

README_CN.md

@@ -1,70 +0,0 @@
-<p align="center">
-  <img align="center" alt="logo" src="docs/static/img/frigate.png">
-</p>
-
-# Frigate - 一个具有实时目标检测的本地NVR
-
-[English](https://github.com/blakeblackshear/frigate) | \[简体中文\] 
-
-<a href="https://hosted.weblate.org/engage/frigate-nvr/-/zh_Hans/">
-<img src="https://hosted.weblate.org/widget/frigate-nvr/-/zh_Hans/svg-badge.svg" alt="翻译状态" />
-</a>
-
-一个完整的本地网络视频录像机（NVR），专为[Home Assistant](https://www.home-assistant.io)设计，具备AI物体检测功能。使用OpenCV和TensorFlow在本地为IP摄像头执行实时物体检测。
-
-强烈推荐使用GPU或者AI加速器（例如[Google Coral加速器](https://coral.ai/products/) 或者 [Hailo](https://hailo.ai/)）。它们的性能甚至超过目前的顶级CPU，并且可以以极低的耗电实现更优的性能。
-- 通过[自定义组件](https://github.com/blakeblackshear/frigate-hass-integration)与Home Assistant紧密集成
-- 设计上通过仅在必要时和必要地点寻找物体，最大限度地减少资源使用并最大化性能
-- 大量利用多进程处理，强调实时性而非处理每一帧
-- 使用非常低开销的运动检测来确定运行物体检测的位置
-- 使用TensorFlow进行物体检测，运行在单独的进程中以达到最大FPS
-- 通过MQTT进行通信，便于集成到其他系统中
-- 根据检测到的物体设置保留时间进行视频录制
-- 24/7全天候录制
-- 通过RTSP重新流传输以减少摄像头的连接数
-- 支持WebRTC和MSE，实现低延迟的实时观看
-
-## 社区中文翻译文档
-
-你可以在这里查看文档 https://docs.frigate-cn.video
-
-## 赞助
-
-如果您想通过捐赠支持开发，请使用 [Github Sponsors](https://github.com/sponsors/blakeblackshear)。
-
-## 截图
-
-### 实时监控面板
-<div>
-<img width="800" alt="实时监控面板" src="https://github.com/blakeblackshear/frigate/assets/569905/5e713cb9-9db5-41dc-947a-6937c3bc376e">
-</div>
-
-### 简单的核查工作流程
-<div>
-<img width="800" alt="简单的审查工作流程" src="https://github.com/blakeblackshear/frigate/assets/569905/6fed96e8-3b18-40e5-9ddc-31e6f3c9f2ff">
-</div>
-
-### 多摄像头可按时间轴查看
-<div>
-<img width="800" alt="多摄像头可按时间轴查看" src="https://github.com/blakeblackshear/frigate/assets/569905/d6788a15-0eeb-4427-a8d4-80b93cae3d74">
-</div>
-
-### 内置遮罩和区域编辑器
-<div>
-<img width="800" alt="内置遮罩和区域编辑器" src="https://github.com/blakeblackshear/frigate/assets/569905/d7885fc3-bfe6-452f-b7d0-d957cb3e31f5">
-</div>
-
-
-## 翻译
-我们使用 [Weblate](https://hosted.weblate.org/projects/frigate-nvr/) 平台提供翻译支持，欢迎参与进来一起完善。
-
-
-## 非官方中文讨论社区
-欢迎加入中文讨论QQ群：[1043861059](https://qm.qq.com/q/7vQKsTmSz)
-
-Bilibili：https://space.bilibili.com/3546894915602564
-
-
-## 中文社区赞助商
-[![EdgeOne](https://edgeone.ai/media/34fe3a45-492d-4ea4-ae5d-ea1087ca7b4b.png)](https://edgeone.ai/zh?from=github)
-本项目 CDN 加速及安全防护由 Tencent EdgeOne 赞助

audio-labelmap.txt

@@ -1,521 +0,0 @@
-speech
-speech
-speech
-speech
-babbling
-speech
-yell
-bellow
-whoop
-yell
-yell
-yell
-whispering
-laughter
-laughter
-laughter
-snicker
-laughter
-laughter
-crying
-crying
-crying
-yell
-sigh
-singing
-choir
-sodeling
-chant
-mantra
-child_singing
-synthetic_singing
-rapping
-humming
-groan
-grunt
-whistling
-breathing
-wheeze
-snoring
-gasp
-pant
-snort
-cough
-throat_clearing
-sneeze
-sniff
-run
-shuffle
-footsteps
-chewing
-biting
-gargling
-stomach_rumble
-burping
-hiccup
-fart
-hands
-finger_snapping
-clapping
-heartbeat
-heart_murmur
-cheering
-applause
-chatter
-crowd
-speech
-children_playing
-animal
-pets
-dog
-bark
-yip
-howl
-bow-wow
-growling
-whimper_dog
-cat
-purr
-meow
-hiss
-caterwaul
-livestock
-horse
-clip-clop
-neigh
-cattle
-moo
-cowbell
-pig
-oink
-goat
-bleat
-sheep
-fowl
-chicken
-cluck
-cock-a-doodle-doo
-turkey
-gobble
-duck
-quack
-goose
-honk
-wild_animals
-roaring_cats
-roar
-bird
-chird
-chirp
-squawk
-pigeon
-coo
-crow
-caw
-owl
-hoot
-flapping_wings
-dogs
-rats
-mouse
-patter
-insect
-cricket
-mosquito
-fly
-buzz
-buzz
-frog
-croak
-snake
-rattle
-whale_vocalization
-music
-musical_instrument
-plucked_string_instrument
-guitar
-electric_guitar
-bass_guitar
-acoustic_guitar
-steel_guitar
-tapping
-strum
-banjo
-sitar
-mandolin
-zither
-ukulele
-keyboard
-piano
-electric_piano
-organ
-electronic_organ
-hammond_organ
-synthesizer
-sampler
-harpsichord
-percussion
-drum_kit
-drum_machine
-drum
-snare_drum
-rimshot
-drum_roll
-bass_drum
-timpani
-tabla
-cymbal
-hi-hat
-wood_block
-tambourine
-rattle
-maraca
-gong
-tubular_bells
-mallet_percussion
-marimba
-glockenspiel
-vibraphone
-steelpan
-orchestra
-brass_instrument
-french_horn
-trumpet
-trombone
-bowed_string_instrument
-string_section
-violin
-pizzicato
-cello
-double_bass
-wind_instrument
-flute
-saxophone
-clarinet
-harp
-bell
-church_bell
-jingle_bell
-bicycle_bell
-tuning_fork
-chime
-wind_chime
-change_ringing
-harmonica
-accordion
-bagpipes
-didgeridoo
-shofar
-theremin
-singing_bowl
-scratching
-pop_music
-hip_hop_music
-beatboxing
-rock_music
-heavy_metal
-punk_rock
-grunge
-progressive_rock
-rock_and_roll
-psychedelic_rock
-rhythm_and_blues
-soul_music
-reggae
-country
-swing_music
-bluegrass
-funk
-folk_music
-middle_eastern_music
-jazz
-disco
-classical_music
-opera
-electronic_music
-house_music
-techno
-dubstep
-drum_and_bass
-electronica
-electronic_dance_music
-ambient_music
-trance_music
-music_of_latin_america
-salsa_music
-flamenco
-blues
-music_for_children
-new-age_music
-vocal_music
-a_capella
-music_of_africa
-afrobeat
-christian_music
-gospel_music
-music_of_asia
-carnatic_music
-music_of_bollywood
-ska
-traditional_music
-independent_music
-song
-background_music
-theme_music
-jingle
-soundtrack_music
-lullaby
-video_game_music
-christmas_music
-dance_music
-wedding_music
-happy_music
-sad_music
-tender_music
-exciting_music
-angry_music
-scary_music
-wind
-rustling_leaves
-wind_noise
-thunderstorm
-thunder
-water
-rain
-raindrop
-rain_on_surface
-stream
-waterfall
-ocean
-waves
-steam
-gurgling
-fire
-crackle
-vehicle
-boat
-sailboat
-rowboat
-motorboat
-ship
-motor_vehicle
-car
-honk
-toot
-car_alarm
-power_windows
-skidding
-tire_squeal
-car_passing_by
-race_car
-truck
-air_brake
-air_horn
-reversing_beeps
-ice_cream_truck
-bus
-emergency_vehicle
-police_car
-ambulance
-fire_engine
-motorcycle
-traffic_noise
-rail_transport
-train
-train_whistle
-train_horn
-railroad_car
-train_wheels_squealing
-subway
-aircraft
-aircraft_engine
-jet_engine
-propeller
-helicopter
-fixed-wing_aircraft
-bicycle
-skateboard
-engine
-light_engine
-dental_drill's_drill
-lawn_mower
-chainsaw
-medium_engine
-heavy_engine
-engine_knocking
-engine_starting
-idling
-accelerating
-door
-doorbell
-ding-dong
-sliding_door
-slam
-knock
-tap
-squeak
-cupboard_open_or_close
-drawer_open_or_close
-dishes
-cutlery
-chopping
-frying
-microwave_oven
-blender
-water_tap
-sink
-bathtub
-hair_dryer
-toilet_flush
-toothbrush
-electric_toothbrush
-vacuum_cleaner
-zipper
-keys_jangling
-coin
-scissors
-electric_shaver
-shuffling_cards
-typing
-typewriter
-computer_keyboard
-writing
-alarm
-telephone
-telephone_bell_ringing
-ringtone
-telephone_dialing
-dial_tone
-busy_signal
-alarm_clock
-siren
-civil_defense_siren
-buzzer
-smoke_detector
-fire_alarm
-foghorn
-whistle
-steam_whistle
-mechanisms
-ratchet
-clock
-tick
-tick-tock
-gears
-pulleys
-sewing_machine
-mechanical_fan
-air_conditioning
-cash_register
-printer
-camera
-single-lens_reflex_camera
-tools
-hammer
-jackhammer
-sawing
-filing
-sanding
-power_tool
-drill
-explosion
-gunshot
-machine_gun
-fusillade
-artillery_fire
-cap_gun
-fireworks
-firecracker
-burst
-eruption
-boom
-wood
-chop
-splinter
-crack
-glass
-chink
-shatter
-liquid
-splash
-slosh
-squish
-drip
-pour
-trickle
-gush
-fill
-spray
-pump
-stir
-boiling
-sonar
-arrow
-whoosh
-thump
-thunk
-electronic_tuner
-effects_unit
-chorus_effect
-basketball_bounce
-bang
-slap
-whack
-smash
-breaking
-bouncing
-whip
-flap
-scratch
-scrape
-rub
-roll
-crushing
-crumpling
-tearing
-beep
-ping
-ding
-clang
-squeal
-creak
-rustle
-whir
-clatter
-sizzle
-clicking
-clickety-clack
-rumble
-plop
-jingle
-hum
-zing
-boing
-crunch
-silence
-sine_wave
-harmonic
-chirp_tone
-sound_effect
-pulse
-inside
-inside
-inside
-outside
-outside
-reverberation
-echo
-noise
-environmental_noise
-static
-mains_hum
-distortion
-sidetone
-cacophony
-white_noise
-pink_noise
-throbbing
-vibration
-television
-radio
-field_recording

benchmark.py

@@ -1,19 +1,12 @@
-import datetime
-import multiprocessing as mp
+import os
 from statistics import mean
-
+import multiprocessing as mp
 import numpy as np
+import datetime
+from frigate.edgetpu import LocalObjectDetector, EdgeTPUProcess, RemoteObjectDetector, load_labels
 
-from frigate.config import DetectorTypeEnum
-from frigate.object_detection.base import (
-    ObjectDetectProcess,
-    RemoteObjectDetector,
-    load_labels,
-)
-from frigate.util.process import FrigateProcess
-
-my_frame = np.expand_dims(np.full((300, 300, 3), 1, np.uint8), axis=0)
-labels = load_labels("/labelmap.txt")
+my_frame = np.expand_dims(np.full((300,300,3), 1, np.uint8), axis=0)
+labels = load_labels('/labelmap.txt')
 
 ######
 # Minimal same process runner
@@ -46,23 +39,20 @@ labels = load_labels("/labelmap.txt")
 
 
 def start(id, num_detections, detection_queue, event):
-    object_detector = RemoteObjectDetector(
-        str(id), "/labelmap.txt", detection_queue, event
-    )
-    start = datetime.datetime.now().timestamp()
+  object_detector = RemoteObjectDetector(str(id), '/labelmap.txt', detection_queue, event)
+  start = datetime.datetime.now().timestamp()
 
-    frame_times = []
-    for x in range(0, num_detections):
-        start_frame = datetime.datetime.now().timestamp()
-        object_detector.detect(my_frame)
-        frame_times.append(datetime.datetime.now().timestamp() - start_frame)
-
-    duration = datetime.datetime.now().timestamp() - start
-    object_detector.cleanup()
-    print(f"{id} - Processed for {duration:.2f} seconds.")
-    print(f"{id} - FPS: {object_detector.fps.eps():.2f}")
-    print(f"{id} - Average frame processing time: {mean(frame_times) * 1000:.2f}ms")
+  frame_times = []
+  for x in range(0, num_detections):
+    start_frame = datetime.datetime.now().timestamp()
+    detections = object_detector.detect(my_frame)
+    frame_times.append(datetime.datetime.now().timestamp()-start_frame)
 
+  duration = datetime.datetime.now().timestamp()-start
+  object_detector.cleanup()
+  print(f"{id} - Processed for {duration:.2f} seconds.")
+  print(f"{id} - FPS: {object_detector.fps.eps():.2f}")
+  print(f"{id} - Average frame processing time: {mean(frame_times)*1000:.2f}ms")
 
 ######
 # Separate process runner
@@ -81,29 +71,23 @@ camera_processes = []
 
 events = {}
 for x in range(0, 10):
-    events[str(x)] = mp.Event()
+  events[str(x)] = mp.Event()
 detection_queue = mp.Queue()
-edgetpu_process_1 = ObjectDetectProcess(
-    detection_queue, events, DetectorTypeEnum.edgetpu, "usb:0"
-)
-edgetpu_process_2 = ObjectDetectProcess(
-    detection_queue, events, DetectorTypeEnum.edgetpu, "usb:1"
-)
+edgetpu_process_1 = EdgeTPUProcess(detection_queue, events, 'usb:0')
+edgetpu_process_2 = EdgeTPUProcess(detection_queue, events, 'usb:1')
 
 for x in range(0, 10):
-    camera_process = FrigateProcess(
-        target=start, args=(x, 300, detection_queue, events[str(x)])
-    )
-    camera_process.daemon = True
-    camera_processes.append(camera_process)
+  camera_process = mp.Process(target=start, args=(x, 300, detection_queue, events[str(x)]))
+  camera_process.daemon = True
+  camera_processes.append(camera_process)
 
 start_time = datetime.datetime.now().timestamp()
 
 for p in camera_processes:
-    p.start()
+  p.start()
 
 for p in camera_processes:
-    p.join()
+  p.join()
 
-duration = datetime.datetime.now().timestamp() - start_time
-print(f"Total - Processed for {duration:.2f} seconds.")
+duration = datetime.datetime.now().timestamp()-start_time
+print(f"Total - Processed for {duration:.2f} seconds.")

benchmark_motion.py

@@ -1,118 +0,0 @@
-import datetime
-import multiprocessing as mp
-import os
-
-import cv2
-import numpy as np
-
-from frigate.config import MotionConfig
-from frigate.motion.improved_motion import ImprovedMotionDetector
-from frigate.util import create_mask
-
-# get info on the video
-# cap = cv2.VideoCapture("debug/front_cam_2023_05_23_08_41__2023_05_23_08_43.mp4")
-# cap = cv2.VideoCapture("debug/motion_test_clips/rain_1.mp4")
-cap = cv2.VideoCapture("debug/motion_test_clips/lawn_mower_night_1.mp4")
-# cap = cv2.VideoCapture("airport.mp4")
-width = int(cap.get(cv2.CAP_PROP_FRAME_WIDTH))
-height = int(cap.get(cv2.CAP_PROP_FRAME_HEIGHT))
-fps = cap.get(cv2.CAP_PROP_FPS)
-frame_shape = (height, width, 3)
-# Nick back:
-# "1280,0,1280,316,1170,216,1146,126,1016,127,979,82,839,0",
-# "310,350,300,402,224,405,241,354",
-# "378,0,375,26,0,23,0,0",
-# Front door:
-# "1080,0,1080,339,1010,280,1020,169,777,163,452,170,318,299,191,365,186,417,139,470,108,516,40,530,0,514,0,0",
-# "336,833,438,1024,346,1093,103,1052,24,814",
-# Back
-# "1855,0,1851,100,1289,96,1105,161,1045,119,890,121,890,0",
-# "505,95,506,138,388,153,384,114",
-# "689,72,689,122,549,134,547,89",
-# "261,134,264,176,169,195,167,158",
-# "145,159,146,202,70,220,65,183",
-
-mask = create_mask(
-    (height, width),
-    [
-        "1080,0,1080,339,1010,280,1020,169,777,163,452,170,318,299,191,365,186,417,139,470,108,516,40,530,0,514,0,0",
-        "336,833,438,1024,346,1093,103,1052,24,814",
-    ],
-)
-
-# create the motion config
-motion_config_1 = MotionConfig()
-motion_config_1.mask = np.zeros((height, width), np.uint8)
-motion_config_1.mask[:] = mask
-# motion_config_1.improve_contrast = 1
-motion_config_1.frame_height = 150
-# motion_config_1.frame_alpha = 0.02
-# motion_config_1.threshold = 30
-# motion_config_1.contour_area = 10
-
-motion_config_2 = MotionConfig()
-motion_config_2.mask = np.zeros((height, width), np.uint8)
-motion_config_2.mask[:] = mask
-# motion_config_2.improve_contrast = 1
-motion_config_2.frame_height = 150
-# motion_config_2.frame_alpha = 0.01
-motion_config_2.threshold = 20
-# motion_config.contour_area = 10
-
-save_images = True
-
-improved_motion_detector_1 = ImprovedMotionDetector(
-    frame_shape=frame_shape,
-    config=motion_config_1,
-    fps=fps,
-    improve_contrast=mp.Value("i", motion_config_1.improve_contrast),
-    threshold=mp.Value("i", motion_config_1.threshold),
-    contour_area=mp.Value("i", motion_config_1.contour_area),
-    name="default",
-)
-improved_motion_detector_1.save_images = save_images
-
-improved_motion_detector_2 = ImprovedMotionDetector(
-    frame_shape=frame_shape,
-    config=motion_config_2,
-    fps=fps,
-    improve_contrast=mp.Value("i", motion_config_2.improve_contrast),
-    threshold=mp.Value("i", motion_config_2.threshold),
-    contour_area=mp.Value("i", motion_config_2.contour_area),
-    name="compare",
-)
-improved_motion_detector_2.save_images = save_images
-
-# read and process frames
-ret, frame = cap.read()
-frame_counter = 1
-while ret:
-    yuv_frame = cv2.cvtColor(frame, cv2.COLOR_BGR2YUV_I420)
-
-    start_frame = datetime.datetime.now().timestamp()
-    improved_motion_detector_1.detect(yuv_frame)
-
-    start_frame = datetime.datetime.now().timestamp()
-    improved_motion_detector_2.detect(yuv_frame)
-
-    default_frame = f"debug/frames/default-{frame_counter}.jpg"
-    compare_frame = f"debug/frames/compare-{frame_counter}.jpg"
-    if os.path.exists(default_frame) and os.path.exists(compare_frame):
-        images = [
-            cv2.imread(default_frame),
-            cv2.imread(compare_frame),
-        ]
-
-        cv2.imwrite(
-            f"debug/frames/all-{frame_counter}.jpg",
-            cv2.vconcat(images)
-            if frame_shape[0] > frame_shape[1]
-            else cv2.hconcat(images),
-        )
-        os.unlink(default_frame)
-        os.unlink(compare_frame)
-    frame_counter += 1
-
-    ret, frame = cap.read()
-
-cap.release()

config/config.yml.example

@@ -1,16 +0,0 @@
-mqtt:
-  host: mqtt
-
-cameras:
-  test:
-    ffmpeg:
-      inputs:
-        - path: /media/frigate/car-stopping.mp4
-          input_args: -re -stream_loop -1 -fflags +genpts
-          roles:
-            - detect
-            - rtmp
-    detect:
-      height: 1080
-      width: 1920
-      fps: 5

cspell.json

@@ -1,22 +0,0 @@
-{
-  "version": "0.2",
-  "ignorePaths": [
-    "Dockerfile",
-    "Dockerfile.*",
-    "CMakeLists.txt",
-    "*.db",
-    "node_modules",
-    "__pycache__",
-    "dist",
-    "/audio-labelmap.txt"
-  ],
-  "language": "en",
-  "dictionaryDefinitions": [
-    {
-      "name": "frigate-dictionary",
-      "path": "./.cspell/frigate-dictionary.txt",
-      "addWords": true
-    }
-  ],
-  "dictionaries": ["frigate-dictionary"]
-}

docker-compose.yml

@@ -1,42 +0,0 @@
-services:
-  devcontainer:
-    container_name: frigate-devcontainer
-    # Check host system's actual render/video/plugdev group IDs with 'getent group render', 'getent group video', and 'getent group plugdev'
-    # Must add these exact IDs in container's group_add section or OpenVINO GPU acceleration will fail
-    group_add:
-      - "109" # render
-      - "110" # render
-      - "44"  # video
-      - "46"  # plugdev
-    shm_size: "256mb"
-    build:
-      context: .
-      dockerfile: docker/main/Dockerfile
-      # Use target devcontainer-trt for TensorRT dev
-      target: devcontainer
-    ## Uncomment this block for nvidia gpu support
-    # deploy:
-    #       resources:
-    #           reservations:
-    #               devices:
-    #                   - driver: nvidia
-    #                     count: 1
-    #                     capabilities: [gpu]
-    environment:
-      YOLO_MODELS: ""
-    # devices:
-      # - /dev/bus/usb:/dev/bus/usb # Uncomment for Google Coral USB
-      # - /dev/dri:/dev/dri # for intel hwaccel, needs to be updated for your hardware
-    volumes:
-      - .:/workspace/frigate:cached
-      - ./web/dist:/opt/frigate/web:cached
-      - /etc/localtime:/etc/localtime:ro
-      - ./config:/config
-      - ./debug:/media/frigate
-     # - /dev/bus/usb:/dev/bus/usb # Uncomment for Google Coral USB
-  mqtt:
-    container_name: mqtt
-    image: eclipse-mosquitto:2.0
-    command: mosquitto -c /mosquitto-no-auth.conf # enable no-auth mode
-    ports:
-      - "1883:1883"

docker/Dockerfile.aarch64

@@ -0,0 +1,22 @@
+FROM frigate-base
+LABEL maintainer "blakeb@blakeshome.com"
+
+ENV DEBIAN_FRONTEND=noninteractive
+# Install packages for apt repo
+RUN apt-get -qq update \
+    && apt-get -qq install --no-install-recommends -y \
+        # ffmpeg runtime dependencies
+        libgomp1 \
+        # runtime dependencies
+        libopenexr24 \
+        libgstreamer1.0-0 \
+        libgstreamer-plugins-base1.0-0 \
+        libopenblas-base \
+        libjpeg-turbo8 \
+        libpng16-16 \
+        libtiff5 \
+        libdc1394-22 \
+    ## Tensorflow lite
+    && pip3 install https://github.com/google-coral/pycoral/releases/download/release-frogfish/tflite_runtime-2.5.0-cp38-cp38-linux_aarch64.whl \
+    && rm -rf /var/lib/apt/lists/* \
+    && (apt-get autoremove -y; apt-get autoclean -y)

docker/Dockerfile.amd64

@@ -0,0 +1,18 @@
+FROM frigate-base
+LABEL maintainer "blakeb@blakeshome.com"
+
+# By default, use the i965 driver
+ENV LIBVA_DRIVER_NAME=i965
+# Install packages for apt repo
+RUN apt-get -qq update \
+    && apt-get -qq install --no-install-recommends -y \
+        # ffmpeg dependencies
+        libgomp1 \
+        # VAAPI drivers for Intel hardware accel
+        libva-drm2 libva2 libmfx1 i965-va-driver vainfo intel-media-va-driver mesa-va-drivers \
+        ## Tensorflow lite
+    && wget -q https://github.com/google-coral/pycoral/releases/download/release-frogfish/tflite_runtime-2.5.0-cp38-cp38-linux_x86_64.whl \
+    && python3.8 -m pip install tflite_runtime-2.5.0-cp38-cp38-linux_x86_64.whl \
+    && rm tflite_runtime-2.5.0-cp38-cp38-linux_x86_64.whl \
+    && rm -rf /var/lib/apt/lists/* \
+    && (apt-get autoremove -y; apt-get autoclean -y)

docker/Dockerfile.amd64nvidia

@@ -0,0 +1,47 @@
+FROM frigate-base
+LABEL maintainer "blakeb@blakeshome.com"
+
+# Install packages for apt repo
+RUN apt-get -qq update \
+    && apt-get -qq install --no-install-recommends -y \
+        # ffmpeg dependencies
+        libgomp1 \
+        ## Tensorflow lite
+    && wget -q https://github.com/google-coral/pycoral/releases/download/release-frogfish/tflite_runtime-2.5.0-cp38-cp38-linux_x86_64.whl \
+    && python3.8 -m pip install tflite_runtime-2.5.0-cp38-cp38-linux_x86_64.whl \
+    && rm tflite_runtime-2.5.0-cp38-cp38-linux_x86_64.whl \
+    && rm -rf /var/lib/apt/lists/* \
+    && (apt-get autoremove -y; apt-get autoclean -y)
+
+
+# nvidia layer (see https://gitlab.com/nvidia/container-images/cuda/blob/master/dist/11.1/ubuntu20.04-x86_64/base/Dockerfile)
+ENV	    NVIDIA_DRIVER_CAPABILITIES compute,utility,video
+
+RUN apt-get update && apt-get install -y --no-install-recommends \
+    gnupg2 curl ca-certificates && \
+    curl -fsSL https://developer.download.nvidia.com/compute/cuda/repos/ubuntu2004/x86_64/7fa2af80.pub | apt-key add - && \
+    echo "deb https://developer.download.nvidia.com/compute/cuda/repos/ubuntu2004/x86_64 /" > /etc/apt/sources.list.d/cuda.list && \
+    echo "deb https://developer.download.nvidia.com/compute/machine-learning/repos/ubuntu2004/x86_64 /" > /etc/apt/sources.list.d/nvidia-ml.list && \
+    apt-get purge --autoremove -y curl \
+    && rm -rf /var/lib/apt/lists/*
+
+ENV CUDA_VERSION 11.1.1
+
+# For libraries in the cuda-compat-* package: https://docs.nvidia.com/cuda/eula/index.html#attachment-a
+RUN apt-get update && apt-get install -y --no-install-recommends \
+    cuda-cudart-11-1=11.1.74-1 \
+    cuda-compat-11-1 \
+    && ln -s cuda-11.1 /usr/local/cuda && \
+    rm -rf /var/lib/apt/lists/*
+
+# Required for nvidia-docker v1
+RUN echo "/usr/local/nvidia/lib" >> /etc/ld.so.conf.d/nvidia.conf && \
+    echo "/usr/local/nvidia/lib64" >> /etc/ld.so.conf.d/nvidia.conf
+
+ENV PATH /usr/local/nvidia/bin:/usr/local/cuda/bin:${PATH}
+ENV LD_LIBRARY_PATH /usr/local/nvidia/lib:/usr/local/nvidia/lib64
+
+# nvidia-container-runtime
+ENV NVIDIA_VISIBLE_DEVICES all
+ENV NVIDIA_DRIVER_CAPABILITIES compute,utility,video
+ENV NVIDIA_REQUIRE_CUDA "cuda>=11.1 brand=tesla,driver>=418,driver<419 brand=tesla,driver>=440,driver<441 brand=tesla,driver>=450,driver<451"

docker/Dockerfile.armv7

@@ -0,0 +1,24 @@
+FROM frigate-base
+LABEL maintainer "blakeb@blakeshome.com"
+
+ENV DEBIAN_FRONTEND=noninteractive
+# Install packages for apt repo
+RUN apt-get -qq update \
+    && apt-get -qq install --no-install-recommends -y \
+        # ffmpeg runtime dependencies
+        libgomp1 \
+        # runtime dependencies
+        libopenexr24 \
+        libgstreamer1.0-0 \
+        libgstreamer-plugins-base1.0-0 \
+        libopenblas-base \
+        libjpeg-turbo8 \
+        libpng16-16 \
+        libtiff5 \
+        libdc1394-22 \
+        libaom0 \
+        libx265-179 \
+    ## Tensorflow lite
+    && pip3 install https://github.com/google-coral/pycoral/releases/download/release-frogfish/tflite_runtime-2.5.0-cp38-cp38-linux_armv7l.whl \
+    && rm -rf /var/lib/apt/lists/* \
+    && (apt-get autoremove -y; apt-get autoclean -y)

docker/Dockerfile.base

@@ -0,0 +1,58 @@
+ARG ARCH=amd64
+ARG WHEELS_VERSION
+ARG FFMPEG_VERSION
+FROM blakeblackshear/frigate-wheels:${WHEELS_VERSION}-${ARCH} as wheels
+FROM blakeblackshear/frigate-ffmpeg:${FFMPEG_VERSION}-${ARCH} as ffmpeg
+FROM frigate-web as web
+
+FROM ubuntu:20.04
+LABEL maintainer "blakeb@blakeshome.com"
+
+COPY --from=ffmpeg /usr/local /usr/local/
+
+COPY --from=wheels /wheels/. /wheels/
+
+ENV FLASK_ENV=development
+# ENV FONTCONFIG_PATH=/etc/fonts
+ENV DEBIAN_FRONTEND=noninteractive
+# Install packages for apt repo
+RUN apt-get -qq update \
+    && apt-get upgrade -y \
+    && apt-get -qq install --no-install-recommends -y \
+    gnupg wget unzip tzdata nginx libnginx-mod-rtmp \
+    && apt-get -qq install --no-install-recommends -y \
+        python3-pip \
+    && pip3 install -U /wheels/*.whl \
+    && APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=DontWarn apt-key adv --fetch-keys https://packages.cloud.google.com/apt/doc/apt-key.gpg \
+    && echo "deb https://packages.cloud.google.com/apt coral-edgetpu-stable main" > /etc/apt/sources.list.d/coral-edgetpu.list \
+    && echo "libedgetpu1-max libedgetpu/accepted-eula select true" | debconf-set-selections \
+    && apt-get -qq update && apt-get -qq install --no-install-recommends -y \
+        libedgetpu1-max=15.0 \
+    && rm -rf /var/lib/apt/lists/* /wheels \
+    && (apt-get autoremove -y; apt-get autoclean -y)
+
+RUN pip3 install \
+    peewee_migrate \
+    zeroconf \
+    voluptuous
+
+COPY nginx/nginx.conf /etc/nginx/nginx.conf
+
+# get model and labels
+COPY labelmap.txt /labelmap.txt
+RUN wget -q https://github.com/google-coral/test_data/raw/master/ssdlite_mobiledet_coco_qat_postprocess_edgetpu.tflite -O /edgetpu_model.tflite
+RUN wget -q https://github.com/google-coral/test_data/raw/master/ssdlite_mobiledet_coco_qat_postprocess.tflite -O /cpu_model.tflite
+
+WORKDIR /opt/frigate/
+ADD frigate frigate/
+ADD migrations migrations/
+
+COPY --from=web /opt/frigate/build web/
+
+COPY run.sh /run.sh
+RUN chmod +x /run.sh
+
+EXPOSE 5000
+EXPOSE 1935
+
+CMD ["/run.sh"]

docker/Dockerfile.ffmpeg.aarch64

@@ -0,0 +1,474 @@
+# inspired by:
+# https://github.com/collelog/ffmpeg/blob/master/4.3.1-alpine-rpi4-arm64v8.Dockerfile
+# https://github.com/mmastrac/ffmpeg-omx-rpi-docker/blob/master/Dockerfile
+# https://github.com/jrottenberg/ffmpeg/pull/158/files
+# https://github.com/jrottenberg/ffmpeg/pull/239
+FROM        ubuntu:20.04 AS base
+
+WORKDIR     /tmp/workdir
+
+ENV     DEBIAN_FRONTEND=noninteractive
+RUN     apt-get -yqq update && \
+        apt-get install -yq --no-install-recommends ca-certificates expat libgomp1 && \
+        apt-get autoremove -y && \
+        apt-get clean -y
+
+FROM base as build
+
+ENV         FFMPEG_VERSION=4.3.1 \
+            AOM_VERSION=v1.0.0 \
+            FDKAAC_VERSION=0.1.5 \
+            FREETYPE_VERSION=2.5.5 \
+            FRIBIDI_VERSION=0.19.7 \
+            KVAZAAR_VERSION=1.2.0 \
+            LAME_VERSION=3.100 \
+            LIBPTHREAD_STUBS_VERSION=0.4 \
+            LIBVIDSTAB_VERSION=1.1.0 \
+            LIBXCB_VERSION=1.13.1 \
+            XCBPROTO_VERSION=1.13 \
+            OGG_VERSION=1.3.2 \
+            OPENCOREAMR_VERSION=0.1.5 \
+            OPUS_VERSION=1.2 \
+            OPENJPEG_VERSION=2.1.2 \
+            THEORA_VERSION=1.1.1 \
+            VORBIS_VERSION=1.3.5 \
+            VPX_VERSION=1.8.0 \
+            WEBP_VERSION=1.0.2 \
+            X264_VERSION=20170226-2245-stable \
+            X265_VERSION=3.1.1 \
+            XAU_VERSION=1.0.9 \
+            XORG_MACROS_VERSION=1.19.2 \
+            XPROTO_VERSION=7.0.31 \
+            XVID_VERSION=1.3.4 \
+            LIBZMQ_VERSION=4.3.2 \
+            SRC=/usr/local
+
+ARG         FREETYPE_SHA256SUM="5d03dd76c2171a7601e9ce10551d52d4471cf92cd205948e60289251daddffa8 freetype-2.5.5.tar.gz"
+ARG         FRIBIDI_SHA256SUM="3fc96fa9473bd31dcb5500bdf1aa78b337ba13eb8c301e7c28923fea982453a8 0.19.7.tar.gz"
+ARG         LIBVIDSTAB_SHA256SUM="14d2a053e56edad4f397be0cb3ef8eb1ec3150404ce99a426c4eb641861dc0bb v1.1.0.tar.gz"
+ARG         OGG_SHA256SUM="e19ee34711d7af328cb26287f4137e70630e7261b17cbe3cd41011d73a654692 libogg-1.3.2.tar.gz"
+ARG         OPUS_SHA256SUM="77db45a87b51578fbc49555ef1b10926179861d854eb2613207dc79d9ec0a9a9 opus-1.2.tar.gz"
+ARG         THEORA_SHA256SUM="40952956c47811928d1e7922cda3bc1f427eb75680c3c37249c91e949054916b libtheora-1.1.1.tar.gz"
+ARG         VORBIS_SHA256SUM="6efbcecdd3e5dfbf090341b485da9d176eb250d893e3eb378c428a2db38301ce libvorbis-1.3.5.tar.gz"
+ARG         XVID_SHA256SUM="4e9fd62728885855bc5007fe1be58df42e5e274497591fec37249e1052ae316f xvidcore-1.3.4.tar.gz"
+ARG         LIBZMQ_SHA256SUM="02ecc88466ae38cf2c8d79f09cfd2675ba299a439680b64ade733e26a349edeb v4.3.2.tar.gz"
+
+
+ARG         LD_LIBRARY_PATH=/opt/ffmpeg/lib
+ARG         MAKEFLAGS="-j2"
+ARG         PKG_CONFIG_PATH="/opt/ffmpeg/share/pkgconfig:/opt/ffmpeg/lib/pkgconfig:/opt/ffmpeg/lib64/pkgconfig"
+ARG         PREFIX=/opt/ffmpeg
+ARG         LD_LIBRARY_PATH="/opt/ffmpeg/lib:/opt/ffmpeg/lib64:/usr/lib64:/usr/lib:/lib64:/lib"
+
+
+RUN      buildDeps="autoconf \
+                    automake \
+                    cmake \
+                    curl \
+                    bzip2 \
+                    libexpat1-dev \
+                    g++ \
+                    gcc \
+                    git \
+                    gperf \
+                    libtool \
+                    make \
+                    nasm \
+                    perl \
+                    pkg-config \
+                    python \
+                    libssl-dev \
+                    yasm \
+                    linux-headers-raspi2 \
+                    libomxil-bellagio-dev \
+                    zlib1g-dev" && \
+        apt-get -yqq update && \
+        apt-get install -yq --no-install-recommends ${buildDeps}
+## opencore-amr https://sourceforge.net/projects/opencore-amr/
+RUN \
+        DIR=/tmp/opencore-amr && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://versaweb.dl.sourceforge.net/project/opencore-amr/opencore-amr/opencore-amr-${OPENCOREAMR_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+## x264 http://www.videolan.org/developers/x264.html
+RUN \
+        DIR=/tmp/x264 && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://download.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-${X264_VERSION}.tar.bz2 | \
+        tar -jx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared --enable-pic --disable-cli && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### x265 http://x265.org/
+RUN \
+        DIR=/tmp/x265 && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://download.videolan.org/pub/videolan/x265/x265_${X265_VERSION}.tar.gz  | \
+        tar -zx && \
+        cd x265_${X265_VERSION}/build/linux && \
+        sed -i "/-DEXTRA_LIB/ s/$/ -DCMAKE_INSTALL_PREFIX=\${PREFIX}/" multilib.sh && \
+        sed -i "/^cmake/ s/$/ -DENABLE_CLI=OFF/" multilib.sh && \
+        export CXXFLAGS="${CXXFLAGS} -fPIC" && \
+        ./multilib.sh && \
+        make -C 8bit install && \
+        rm -rf ${DIR}
+### libogg https://www.xiph.org/ogg/
+RUN \
+        DIR=/tmp/ogg && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/ogg/libogg-${OGG_VERSION}.tar.gz && \
+        echo ${OGG_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libogg-${OGG_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libopus https://www.opus-codec.org/
+RUN \
+        DIR=/tmp/opus && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://archive.mozilla.org/pub/opus/opus-${OPUS_VERSION}.tar.gz && \
+        echo ${OPUS_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f opus-${OPUS_VERSION}.tar.gz && \
+        autoreconf -fiv && \
+        ./configure --prefix="${PREFIX}" --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libvorbis https://xiph.org/vorbis/
+RUN \
+        DIR=/tmp/vorbis && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/vorbis/libvorbis-${VORBIS_VERSION}.tar.gz && \
+        echo ${VORBIS_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libvorbis-${VORBIS_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --with-ogg="${PREFIX}" --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libtheora http://www.theora.org/
+RUN \
+        DIR=/tmp/theora && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/theora/libtheora-${THEORA_VERSION}.tar.gz && \
+        echo ${THEORA_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libtheora-${THEORA_VERSION}.tar.gz && \
+        curl -sL 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD' -o config.guess && \
+        curl -sL 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD' -o config.sub && \
+        ./configure --prefix="${PREFIX}" --with-ogg="${PREFIX}" --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libvpx https://www.webmproject.org/code/
+RUN \
+        DIR=/tmp/vpx && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://codeload.github.com/webmproject/libvpx/tar.gz/v${VPX_VERSION} | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-vp8 --enable-vp9 --enable-vp9-highbitdepth --enable-pic --enable-shared \
+        --disable-debug --disable-examples --disable-docs --disable-install-bins  && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libwebp https://developers.google.com/speed/webp/
+RUN \
+        DIR=/tmp/vebp && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://storage.googleapis.com/downloads.webmproject.org/releases/webp/libwebp-${WEBP_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libmp3lame http://lame.sourceforge.net/
+RUN \
+        DIR=/tmp/lame && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://versaweb.dl.sourceforge.net/project/lame/lame/$(echo ${LAME_VERSION} | sed -e 's/[^0-9]*\([0-9]*\)[.]\([0-9]*\)[.]\([0-9]*\)\([0-9A-Za-z-]*\)/\1.\2/')/lame-${LAME_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --bindir="${PREFIX}/bin" --enable-shared --enable-nasm --disable-frontend && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### xvid https://www.xvid.com/
+RUN \
+        DIR=/tmp/xvid && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xvid.org/downloads/xvidcore-${XVID_VERSION}.tar.gz && \
+        echo ${XVID_SHA256SUM} | sha256sum --check && \
+        tar -zx -f xvidcore-${XVID_VERSION}.tar.gz && \
+        cd xvidcore/build/generic && \
+        ./configure --prefix="${PREFIX}" --bindir="${PREFIX}/bin" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### fdk-aac https://github.com/mstorsjo/fdk-aac
+RUN \
+        DIR=/tmp/fdk-aac && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://github.com/mstorsjo/fdk-aac/archive/v${FDKAAC_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        autoreconf -fiv && \
+        ./configure --prefix="${PREFIX}" --enable-shared --datadir="${DIR}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+## openjpeg https://github.com/uclouvain/openjpeg
+RUN \
+        DIR=/tmp/openjpeg && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://github.com/uclouvain/openjpeg/archive/v${OPENJPEG_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        export CFLAGS="${CFLAGS} -DPNG_ARM_NEON_OPT=0" && \
+        cmake -DBUILD_THIRDPARTY:BOOL=ON -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+## freetype https://www.freetype.org/
+RUN  \
+        DIR=/tmp/freetype && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://download.savannah.gnu.org/releases/freetype/freetype-${FREETYPE_VERSION}.tar.gz && \
+        echo ${FREETYPE_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f freetype-${FREETYPE_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+## libvstab https://github.com/georgmartius/vid.stab
+RUN  \
+        DIR=/tmp/vid.stab && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/georgmartius/vid.stab/archive/v${LIBVIDSTAB_VERSION}.tar.gz && \
+        echo ${LIBVIDSTAB_SHA256SUM} | sha256sum --check &&  \
+        tar -zx --strip-components=1 -f v${LIBVIDSTAB_VERSION}.tar.gz && \
+        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+## fridibi https://www.fribidi.org/
+RUN  \
+        DIR=/tmp/fribidi && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/fribidi/fribidi/archive/${FRIBIDI_VERSION}.tar.gz && \
+        echo ${FRIBIDI_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f ${FRIBIDI_VERSION}.tar.gz && \
+        sed -i 's/^SUBDIRS =.*/SUBDIRS=gen.tab charset lib bin/' Makefile.am && \
+        ./bootstrap --no-config --auto && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j1 && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+## kvazaar https://github.com/ultravideo/kvazaar
+RUN \
+        DIR=/tmp/kvazaar && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/ultravideo/kvazaar/archive/v${KVAZAAR_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f v${KVAZAAR_VERSION}.tar.gz && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/aom && \
+        git clone --branch ${AOM_VERSION} --depth 1 https://aomedia.googlesource.com/aom ${DIR} ; \
+        cd ${DIR} ; \
+        rm -rf CMakeCache.txt CMakeFiles ; \
+        mkdir -p ./aom_build ; \
+        cd ./aom_build ; \
+        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" -DBUILD_SHARED_LIBS=1 ..; \
+        make ; \
+        make install ; \
+        rm -rf ${DIR}
+
+## libxcb (and supporting libraries) for screen capture https://xcb.freedesktop.org/
+RUN \
+        DIR=/tmp/xorg-macros && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive//individual/util/util-macros-${XORG_MACROS_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f util-macros-${XORG_MACROS_VERSION}.tar.gz && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/xproto && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive/individual/proto/xproto-${XPROTO_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f xproto-${XPROTO_VERSION}.tar.gz && \
+        curl -sL 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD' -o config.guess && \
+        curl -sL 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD' -o config.sub && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libXau && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive/individual/lib/libXau-${XAU_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libXau-${XAU_VERSION}.tar.gz && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libpthread-stubs && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libxcb-proto && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/xcb-proto-${XCBPROTO_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f xcb-proto-${XCBPROTO_VERSION}.tar.gz && \
+        ACLOCAL_PATH="${PREFIX}/share/aclocal" ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libxcb && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/libxcb-${LIBXCB_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libxcb-${LIBXCB_VERSION}.tar.gz && \
+        ACLOCAL_PATH="${PREFIX}/share/aclocal" ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+## libzmq https://github.com/zeromq/libzmq/
+RUN \
+        DIR=/tmp/libzmq && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/zeromq/libzmq/archive/v${LIBZMQ_VERSION}.tar.gz && \
+        echo ${LIBZMQ_SHA256SUM} | sha256sum --check && \
+        tar -xz --strip-components=1 -f v${LIBZMQ_VERSION}.tar.gz && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        make check && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+## ffmpeg https://ffmpeg.org/
+RUN  \
+        DIR=/tmp/ffmpeg && mkdir -p ${DIR} && cd ${DIR} && \
+        curl -sLO https://ffmpeg.org/releases/ffmpeg-${FFMPEG_VERSION}.tar.bz2 && \
+        tar -jx --strip-components=1 -f ffmpeg-${FFMPEG_VERSION}.tar.bz2
+
+RUN \
+        DIR=/tmp/ffmpeg && mkdir -p ${DIR} && cd ${DIR} && \
+        ./configure \
+        --disable-debug \
+        --disable-doc \
+        --disable-ffplay \
+        --enable-shared \
+        --enable-avresample \
+        --enable-libopencore-amrnb \
+        --enable-libopencore-amrwb \
+        --enable-gpl \
+        --enable-libfreetype \
+        --enable-libvidstab \
+        --enable-libmp3lame \
+        --enable-libopus \
+        --enable-libtheora \
+        --enable-libvorbis \
+        --enable-libvpx \
+        --enable-libwebp \
+        --enable-libxcb \
+        --enable-libx265 \
+        --enable-libxvid \
+        --enable-libx264 \
+        --enable-nonfree \
+        --enable-openssl \
+        --enable-libfdk_aac \
+        --enable-postproc \
+        --enable-small \
+        --enable-version3 \
+        --enable-libzmq \
+        --extra-libs=-ldl \
+        --prefix="${PREFIX}" \
+        --enable-libopenjpeg \
+        --enable-libkvazaar \
+        --enable-libaom \
+        --extra-libs=-lpthread \
+        # --enable-omx \
+        # --enable-omx-rpi \
+        # --enable-mmal \
+        --enable-v4l2_m2m \
+        --enable-neon \
+        --extra-cflags="-I${PREFIX}/include" \
+        --extra-ldflags="-L${PREFIX}/lib" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        make tools/zmqsend && cp tools/zmqsend ${PREFIX}/bin/ && \
+        make distclean && \
+        hash -r && \
+        cd tools && \
+        make qt-faststart && cp qt-faststart ${PREFIX}/bin/
+
+## cleanup
+RUN \
+        ldd ${PREFIX}/bin/ffmpeg | grep opt/ffmpeg | cut -d ' ' -f 3 | xargs -i cp {} /usr/local/lib/ && \
+        for lib in /usr/local/lib/*.so.*; do ln -s "${lib##*/}" "${lib%%.so.*}".so; done && \
+        cp ${PREFIX}/bin/* /usr/local/bin/ && \
+        cp -r ${PREFIX}/share/ffmpeg /usr/local/share/ && \
+        LD_LIBRARY_PATH=/usr/local/lib ffmpeg -buildconf && \
+        cp -r ${PREFIX}/include/libav* ${PREFIX}/include/libpostproc ${PREFIX}/include/libsw* /usr/local/include && \
+        mkdir -p /usr/local/lib/pkgconfig && \
+        for pc in ${PREFIX}/lib/pkgconfig/libav*.pc ${PREFIX}/lib/pkgconfig/libpostproc.pc ${PREFIX}/lib/pkgconfig/libsw*.pc; do \
+          sed "s:${PREFIX}:/usr/local:g" <"$pc" >/usr/local/lib/pkgconfig/"${pc##*/}"; \
+        done
+
+FROM        base AS release
+
+ENV         LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64:/usr/lib:/usr/lib64:/lib:/lib64
+
+CMD         ["--help"]
+ENTRYPOINT  ["ffmpeg"]
+
+COPY --from=build /usr/local /usr/local/
+
+# Run ffmpeg with -c:v h264_v4l2m2m to enable HW accell for decoding on raspberry pi4 64-bit

docker/Dockerfile.ffmpeg.amd64

@@ -0,0 +1,468 @@
+# inspired by:
+# https://github.com/collelog/ffmpeg/blob/master/4.3.1-alpine-rpi4-arm64v8.Dockerfile
+# https://github.com/jrottenberg/ffmpeg/pull/158/files
+# https://github.com/jrottenberg/ffmpeg/pull/239
+FROM        ubuntu:20.04 AS base
+
+WORKDIR     /tmp/workdir
+
+ENV     DEBIAN_FRONTEND=noninteractive
+RUN     apt-get -yqq update && \
+        apt-get install -yq --no-install-recommends ca-certificates expat libgomp1 && \
+        apt-get autoremove -y && \
+        apt-get clean -y
+
+FROM base as build
+
+ENV         FFMPEG_VERSION=4.3.1 \
+            AOM_VERSION=v1.0.0 \
+            FDKAAC_VERSION=0.1.5 \
+            FREETYPE_VERSION=2.5.5 \
+            FRIBIDI_VERSION=0.19.7 \
+            KVAZAAR_VERSION=1.2.0 \
+            LAME_VERSION=3.100 \
+            LIBPTHREAD_STUBS_VERSION=0.4 \
+            LIBVIDSTAB_VERSION=1.1.0 \
+            LIBXCB_VERSION=1.13.1 \
+            XCBPROTO_VERSION=1.13 \
+            OGG_VERSION=1.3.2 \
+            OPENCOREAMR_VERSION=0.1.5 \
+            OPUS_VERSION=1.2 \
+            OPENJPEG_VERSION=2.1.2 \
+            THEORA_VERSION=1.1.1 \
+            VORBIS_VERSION=1.3.5 \
+            VPX_VERSION=1.8.0 \
+            WEBP_VERSION=1.0.2 \
+            X264_VERSION=20170226-2245-stable \
+            X265_VERSION=3.1.1 \
+            XAU_VERSION=1.0.9 \
+            XORG_MACROS_VERSION=1.19.2 \
+            XPROTO_VERSION=7.0.31 \
+            XVID_VERSION=1.3.4 \
+            LIBZMQ_VERSION=4.3.2 \
+            SRC=/usr/local
+
+ARG         FREETYPE_SHA256SUM="5d03dd76c2171a7601e9ce10551d52d4471cf92cd205948e60289251daddffa8 freetype-2.5.5.tar.gz"
+ARG         FRIBIDI_SHA256SUM="3fc96fa9473bd31dcb5500bdf1aa78b337ba13eb8c301e7c28923fea982453a8 0.19.7.tar.gz"
+ARG         LIBVIDSTAB_SHA256SUM="14d2a053e56edad4f397be0cb3ef8eb1ec3150404ce99a426c4eb641861dc0bb v1.1.0.tar.gz"
+ARG         OGG_SHA256SUM="e19ee34711d7af328cb26287f4137e70630e7261b17cbe3cd41011d73a654692 libogg-1.3.2.tar.gz"
+ARG         OPUS_SHA256SUM="77db45a87b51578fbc49555ef1b10926179861d854eb2613207dc79d9ec0a9a9 opus-1.2.tar.gz"
+ARG         THEORA_SHA256SUM="40952956c47811928d1e7922cda3bc1f427eb75680c3c37249c91e949054916b libtheora-1.1.1.tar.gz"
+ARG         VORBIS_SHA256SUM="6efbcecdd3e5dfbf090341b485da9d176eb250d893e3eb378c428a2db38301ce libvorbis-1.3.5.tar.gz"
+ARG         XVID_SHA256SUM="4e9fd62728885855bc5007fe1be58df42e5e274497591fec37249e1052ae316f xvidcore-1.3.4.tar.gz"
+ARG         LIBZMQ_SHA256SUM="02ecc88466ae38cf2c8d79f09cfd2675ba299a439680b64ade733e26a349edeb v4.3.2.tar.gz"
+
+
+ARG         LD_LIBRARY_PATH=/opt/ffmpeg/lib
+ARG         MAKEFLAGS="-j2"
+ARG         PKG_CONFIG_PATH="/opt/ffmpeg/share/pkgconfig:/opt/ffmpeg/lib/pkgconfig:/opt/ffmpeg/lib64/pkgconfig"
+ARG         PREFIX=/opt/ffmpeg
+ARG         LD_LIBRARY_PATH="/opt/ffmpeg/lib:/opt/ffmpeg/lib64:/usr/lib64:/usr/lib:/lib64:/lib"
+
+
+RUN      buildDeps="autoconf \
+                    automake \
+                    cmake \
+                    curl \
+                    bzip2 \
+                    libexpat1-dev \
+                    g++ \
+                    gcc \
+                    git \
+                    gperf \
+                    libtool \
+                    make \
+                    nasm \
+                    perl \
+                    pkg-config \
+                    python \
+                    libssl-dev \
+                    yasm \
+                    libva-dev \
+                    libmfx-dev \
+                    zlib1g-dev" && \
+        apt-get -yqq update && \
+        apt-get install -yq --no-install-recommends ${buildDeps}
+## opencore-amr https://sourceforge.net/projects/opencore-amr/
+RUN \
+        DIR=/tmp/opencore-amr && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://versaweb.dl.sourceforge.net/project/opencore-amr/opencore-amr/opencore-amr-${OPENCOREAMR_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+## x264 http://www.videolan.org/developers/x264.html
+RUN \
+        DIR=/tmp/x264 && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://download.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-${X264_VERSION}.tar.bz2 | \
+        tar -jx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared --enable-pic --disable-cli && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### x265 http://x265.org/
+RUN \
+        DIR=/tmp/x265 && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://download.videolan.org/pub/videolan/x265/x265_${X265_VERSION}.tar.gz  | \
+        tar -zx && \
+        cd x265_${X265_VERSION}/build/linux && \
+        sed -i "/-DEXTRA_LIB/ s/$/ -DCMAKE_INSTALL_PREFIX=\${PREFIX}/" multilib.sh && \
+        sed -i "/^cmake/ s/$/ -DENABLE_CLI=OFF/" multilib.sh && \
+        ./multilib.sh && \
+        make -C 8bit install && \
+        rm -rf ${DIR}
+### libogg https://www.xiph.org/ogg/
+RUN \
+        DIR=/tmp/ogg && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/ogg/libogg-${OGG_VERSION}.tar.gz && \
+        echo ${OGG_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libogg-${OGG_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libopus https://www.opus-codec.org/
+RUN \
+        DIR=/tmp/opus && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://archive.mozilla.org/pub/opus/opus-${OPUS_VERSION}.tar.gz && \
+        echo ${OPUS_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f opus-${OPUS_VERSION}.tar.gz && \
+        autoreconf -fiv && \
+        ./configure --prefix="${PREFIX}" --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libvorbis https://xiph.org/vorbis/
+RUN \
+        DIR=/tmp/vorbis && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/vorbis/libvorbis-${VORBIS_VERSION}.tar.gz && \
+        echo ${VORBIS_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libvorbis-${VORBIS_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --with-ogg="${PREFIX}" --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libtheora http://www.theora.org/
+RUN \
+        DIR=/tmp/theora && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/theora/libtheora-${THEORA_VERSION}.tar.gz && \
+        echo ${THEORA_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libtheora-${THEORA_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --with-ogg="${PREFIX}" --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libvpx https://www.webmproject.org/code/
+RUN \
+        DIR=/tmp/vpx && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://codeload.github.com/webmproject/libvpx/tar.gz/v${VPX_VERSION} | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-vp8 --enable-vp9 --enable-vp9-highbitdepth --enable-pic --enable-shared \
+        --disable-debug --disable-examples --disable-docs --disable-install-bins  && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libwebp https://developers.google.com/speed/webp/
+RUN \
+        DIR=/tmp/vebp && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://storage.googleapis.com/downloads.webmproject.org/releases/webp/libwebp-${WEBP_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libmp3lame http://lame.sourceforge.net/
+RUN \
+        DIR=/tmp/lame && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://versaweb.dl.sourceforge.net/project/lame/lame/$(echo ${LAME_VERSION} | sed -e 's/[^0-9]*\([0-9]*\)[.]\([0-9]*\)[.]\([0-9]*\)\([0-9A-Za-z-]*\)/\1.\2/')/lame-${LAME_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --bindir="${PREFIX}/bin" --enable-shared --enable-nasm --disable-frontend && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### xvid https://www.xvid.com/
+RUN \
+        DIR=/tmp/xvid && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xvid.org/downloads/xvidcore-${XVID_VERSION}.tar.gz && \
+        echo ${XVID_SHA256SUM} | sha256sum --check && \
+        tar -zx -f xvidcore-${XVID_VERSION}.tar.gz && \
+        cd xvidcore/build/generic && \
+        ./configure --prefix="${PREFIX}" --bindir="${PREFIX}/bin" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### fdk-aac https://github.com/mstorsjo/fdk-aac
+RUN \
+        DIR=/tmp/fdk-aac && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://github.com/mstorsjo/fdk-aac/archive/v${FDKAAC_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        autoreconf -fiv && \
+        ./configure --prefix="${PREFIX}" --enable-shared --datadir="${DIR}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+## openjpeg https://github.com/uclouvain/openjpeg
+RUN \
+        DIR=/tmp/openjpeg && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://github.com/uclouvain/openjpeg/archive/v${OPENJPEG_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        cmake -DBUILD_THIRDPARTY:BOOL=ON -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+## freetype https://www.freetype.org/
+RUN  \
+        DIR=/tmp/freetype && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://download.savannah.gnu.org/releases/freetype/freetype-${FREETYPE_VERSION}.tar.gz && \
+        echo ${FREETYPE_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f freetype-${FREETYPE_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+## libvstab https://github.com/georgmartius/vid.stab
+RUN  \
+        DIR=/tmp/vid.stab && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/georgmartius/vid.stab/archive/v${LIBVIDSTAB_VERSION}.tar.gz && \
+        echo ${LIBVIDSTAB_SHA256SUM} | sha256sum --check &&  \
+        tar -zx --strip-components=1 -f v${LIBVIDSTAB_VERSION}.tar.gz && \
+        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+## fridibi https://www.fribidi.org/
+RUN  \
+        DIR=/tmp/fribidi && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/fribidi/fribidi/archive/${FRIBIDI_VERSION}.tar.gz && \
+        echo ${FRIBIDI_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f ${FRIBIDI_VERSION}.tar.gz && \
+        sed -i 's/^SUBDIRS =.*/SUBDIRS=gen.tab charset lib bin/' Makefile.am && \
+        ./bootstrap --no-config --auto && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j1 && \
+        make install && \
+        rm -rf ${DIR}
+## kvazaar https://github.com/ultravideo/kvazaar
+RUN \
+        DIR=/tmp/kvazaar && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/ultravideo/kvazaar/archive/v${KVAZAAR_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f v${KVAZAAR_VERSION}.tar.gz && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/aom && \
+        git clone --branch ${AOM_VERSION} --depth 1 https://aomedia.googlesource.com/aom ${DIR} ; \
+        cd ${DIR} ; \
+        rm -rf CMakeCache.txt CMakeFiles ; \
+        mkdir -p ./aom_build ; \
+        cd ./aom_build ; \
+        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" -DBUILD_SHARED_LIBS=1 ..; \
+        make ; \
+        make install ; \
+        rm -rf ${DIR}
+
+## libxcb (and supporting libraries) for screen capture https://xcb.freedesktop.org/
+RUN \
+        DIR=/tmp/xorg-macros && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive//individual/util/util-macros-${XORG_MACROS_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f util-macros-${XORG_MACROS_VERSION}.tar.gz && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/xproto && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive/individual/proto/xproto-${XPROTO_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f xproto-${XPROTO_VERSION}.tar.gz && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libXau && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive/individual/lib/libXau-${XAU_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libXau-${XAU_VERSION}.tar.gz && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libpthread-stubs && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libxcb-proto && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/xcb-proto-${XCBPROTO_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f xcb-proto-${XCBPROTO_VERSION}.tar.gz && \
+        ACLOCAL_PATH="${PREFIX}/share/aclocal" ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libxcb && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/libxcb-${LIBXCB_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libxcb-${LIBXCB_VERSION}.tar.gz && \
+        ACLOCAL_PATH="${PREFIX}/share/aclocal" ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+## libzmq https://github.com/zeromq/libzmq/
+RUN \
+        DIR=/tmp/libzmq && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/zeromq/libzmq/archive/v${LIBZMQ_VERSION}.tar.gz && \
+        echo ${LIBZMQ_SHA256SUM} | sha256sum --check && \
+        tar -xz --strip-components=1 -f v${LIBZMQ_VERSION}.tar.gz && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" && \
+        make && \
+        make check && \
+        make install && \
+        rm -rf ${DIR}
+
+## ffmpeg https://ffmpeg.org/
+RUN  \
+        DIR=/tmp/ffmpeg && mkdir -p ${DIR} && cd ${DIR} && \
+        curl -sLO https://ffmpeg.org/releases/ffmpeg-${FFMPEG_VERSION}.tar.bz2 && \
+        tar -jx --strip-components=1 -f ffmpeg-${FFMPEG_VERSION}.tar.bz2
+
+
+
+RUN \
+        DIR=/tmp/ffmpeg && mkdir -p ${DIR} && cd ${DIR} && \
+        ./configure \
+        --disable-debug \
+        --disable-doc \
+        --disable-ffplay \
+        --enable-shared \
+        --enable-avresample \
+        --enable-libopencore-amrnb \
+        --enable-libopencore-amrwb \
+        --enable-gpl \
+        --enable-libfreetype \
+        --enable-libvidstab \
+        --enable-libmfx \
+        --enable-libmp3lame \
+        --enable-libopus \
+        --enable-libtheora \
+        --enable-libvorbis \
+        --enable-libvpx \
+        --enable-libwebp \
+        --enable-libxcb \
+        --enable-libx265 \
+        --enable-libxvid \
+        --enable-libx264 \
+        --enable-nonfree \
+        --enable-openssl \
+        --enable-libfdk_aac \
+        --enable-postproc \
+        --enable-small \
+        --enable-version3 \
+        --enable-libzmq \
+        --extra-libs=-ldl \
+        --prefix="${PREFIX}" \
+        --enable-libopenjpeg \
+        --enable-libkvazaar \
+        --enable-libaom \
+        --extra-libs=-lpthread \
+        --enable-vaapi \
+        --extra-cflags="-I${PREFIX}/include" \
+        --extra-ldflags="-L${PREFIX}/lib" && \
+        make && \
+        make install && \
+        make tools/zmqsend && cp tools/zmqsend ${PREFIX}/bin/ && \
+        make distclean && \
+        hash -r && \
+        cd tools && \
+        make qt-faststart && cp qt-faststart ${PREFIX}/bin/
+
+## cleanup
+RUN \
+        ldd ${PREFIX}/bin/ffmpeg | grep opt/ffmpeg | cut -d ' ' -f 3 | xargs -i cp {} /usr/local/lib/ && \
+        for lib in /usr/local/lib/*.so.*; do ln -s "${lib##*/}" "${lib%%.so.*}".so; done && \
+        cp ${PREFIX}/bin/* /usr/local/bin/ && \
+        cp -r ${PREFIX}/share/ffmpeg /usr/local/share/ && \
+        LD_LIBRARY_PATH=/usr/local/lib ffmpeg -buildconf && \
+        cp -r ${PREFIX}/include/libav* ${PREFIX}/include/libpostproc ${PREFIX}/include/libsw* /usr/local/include && \
+        mkdir -p /usr/local/lib/pkgconfig && \
+        for pc in ${PREFIX}/lib/pkgconfig/libav*.pc ${PREFIX}/lib/pkgconfig/libpostproc.pc ${PREFIX}/lib/pkgconfig/libsw*.pc; do \
+          sed "s:${PREFIX}:/usr/local:g" <"$pc" >/usr/local/lib/pkgconfig/"${pc##*/}"; \
+        done
+
+FROM        base AS release
+
+ENV         LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64:/usr/lib:/usr/lib64:/lib:/lib64
+
+CMD         ["--help"]
+ENTRYPOINT  ["ffmpeg"]
+
+COPY --from=build /usr/local /usr/local/
+
+RUN \
+	apt-get update -y && \
+	apt-get install -y --no-install-recommends libva-drm2 libva2 i965-va-driver mesa-va-drivers && \
+	rm -rf /var/lib/apt/lists/*

docker/Dockerfile.ffmpeg.amd64nvidia

@@ -0,0 +1,549 @@
+# inspired by https://github.com/jrottenberg/ffmpeg/blob/master/docker-images/4.3/ubuntu1804/Dockerfile
+
+# ffmpeg - http://ffmpeg.org/download.html
+#
+# From https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu
+#
+# https://hub.docker.com/r/jrottenberg/ffmpeg/
+#
+#
+
+FROM    nvidia/cuda:11.1-devel-ubuntu20.04 AS devel-base
+
+ENV	    NVIDIA_DRIVER_CAPABILITIES compute,utility,video
+ENV         DEBIAN_FRONTEND=noninteractive
+
+WORKDIR     /tmp/workdir
+
+RUN     apt-get -yqq update && \
+        apt-get install -yq --no-install-recommends ca-certificates expat libgomp1 && \
+        apt-get autoremove -y && \
+        apt-get clean -y
+
+FROM       nvidia/cuda:11.1-runtime-ubuntu20.04 AS runtime-base
+
+ENV	    NVIDIA_DRIVER_CAPABILITIES compute,utility,video
+ENV         DEBIAN_FRONTEND=noninteractive
+
+WORKDIR     /tmp/workdir
+
+RUN     apt-get -yqq update && \
+        apt-get install -yq --no-install-recommends ca-certificates expat libgomp1 libxcb-shape0-dev && \
+        apt-get autoremove -y && \
+        apt-get clean -y
+
+
+FROM  devel-base as build
+
+ENV        NVIDIA_HEADERS_VERSION=9.1.23.1
+
+ENV         FFMPEG_VERSION=4.3.1 \
+            AOM_VERSION=v1.0.0 \
+            FDKAAC_VERSION=0.1.5 \
+            FREETYPE_VERSION=2.5.5 \
+            FRIBIDI_VERSION=0.19.7 \
+            KVAZAAR_VERSION=1.2.0 \
+            LAME_VERSION=3.100 \
+            LIBPTHREAD_STUBS_VERSION=0.4 \
+            LIBVIDSTAB_VERSION=1.1.0 \
+            LIBXCB_VERSION=1.13.1 \
+            XCBPROTO_VERSION=1.13 \
+            OGG_VERSION=1.3.2 \
+            OPENCOREAMR_VERSION=0.1.5 \
+            OPUS_VERSION=1.2 \
+            OPENJPEG_VERSION=2.1.2 \
+            THEORA_VERSION=1.1.1 \
+            VORBIS_VERSION=1.3.5 \
+            VPX_VERSION=1.8.0 \
+            WEBP_VERSION=1.0.2 \
+            X264_VERSION=20170226-2245-stable \
+            X265_VERSION=3.1.1 \
+            XAU_VERSION=1.0.9 \
+            XORG_MACROS_VERSION=1.19.2 \
+            XPROTO_VERSION=7.0.31 \
+            XVID_VERSION=1.3.4 \
+            LIBZMQ_VERSION=4.3.2 \
+            LIBSRT_VERSION=1.4.1 \
+            LIBARIBB24_VERSION=1.0.3 \
+            LIBPNG_VERSION=1.6.9 \
+            SRC=/usr/local
+
+ARG         FREETYPE_SHA256SUM="5d03dd76c2171a7601e9ce10551d52d4471cf92cd205948e60289251daddffa8 freetype-2.5.5.tar.gz"
+ARG         FRIBIDI_SHA256SUM="3fc96fa9473bd31dcb5500bdf1aa78b337ba13eb8c301e7c28923fea982453a8 0.19.7.tar.gz"
+ARG         LIBVIDSTAB_SHA256SUM="14d2a053e56edad4f397be0cb3ef8eb1ec3150404ce99a426c4eb641861dc0bb v1.1.0.tar.gz"
+ARG         OGG_SHA256SUM="e19ee34711d7af328cb26287f4137e70630e7261b17cbe3cd41011d73a654692 libogg-1.3.2.tar.gz"
+ARG         OPUS_SHA256SUM="77db45a87b51578fbc49555ef1b10926179861d854eb2613207dc79d9ec0a9a9 opus-1.2.tar.gz"
+ARG         THEORA_SHA256SUM="40952956c47811928d1e7922cda3bc1f427eb75680c3c37249c91e949054916b libtheora-1.1.1.tar.gz"
+ARG         VORBIS_SHA256SUM="6efbcecdd3e5dfbf090341b485da9d176eb250d893e3eb378c428a2db38301ce libvorbis-1.3.5.tar.gz"
+ARG         XVID_SHA256SUM="4e9fd62728885855bc5007fe1be58df42e5e274497591fec37249e1052ae316f xvidcore-1.3.4.tar.gz"
+ARG         LIBZMQ_SHA256SUM="02ecc88466ae38cf2c8d79f09cfd2675ba299a439680b64ade733e26a349edeb v4.3.2.tar.gz"
+ARG         LIBARIBB24_SHA256SUM="f61560738926e57f9173510389634d8c06cabedfa857db4b28fb7704707ff128 v1.0.3.tar.gz"
+
+
+ARG         LD_LIBRARY_PATH=/opt/ffmpeg/lib
+ARG         MAKEFLAGS="-j2"
+ARG         PKG_CONFIG_PATH="/opt/ffmpeg/share/pkgconfig:/opt/ffmpeg/lib/pkgconfig:/opt/ffmpeg/lib64/pkgconfig"
+ARG         PREFIX=/opt/ffmpeg
+ARG         LD_LIBRARY_PATH="/opt/ffmpeg/lib:/opt/ffmpeg/lib64"
+
+
+RUN      buildDeps="autoconf \
+                    automake \
+                    cmake \
+                    curl \
+                    bzip2 \
+                    libexpat1-dev \
+                    g++ \
+                    gcc \
+                    git \
+                    gperf \
+                    libtool \
+                    make \
+                    nasm \
+                    perl \
+                    pkg-config \
+                    python \
+                    libssl-dev \
+                    yasm \
+                    zlib1g-dev" && \
+        apt-get -yqq update && \
+        apt-get install -yq --no-install-recommends ${buildDeps}
+
+RUN \
+	DIR=/tmp/nv-codec-headers && \
+	git clone https://github.com/FFmpeg/nv-codec-headers ${DIR} && \
+	cd ${DIR} && \
+	git checkout n${NVIDIA_HEADERS_VERSION} && \
+	make PREFIX="${PREFIX}" && \
+	make install PREFIX="${PREFIX}" && \
+        rm -rf ${DIR}
+
+## opencore-amr https://sourceforge.net/projects/opencore-amr/
+RUN \
+        DIR=/tmp/opencore-amr && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://versaweb.dl.sourceforge.net/project/opencore-amr/opencore-amr/opencore-amr-${OPENCOREAMR_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+## x264 http://www.videolan.org/developers/x264.html
+RUN \
+        DIR=/tmp/x264 && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://download.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-${X264_VERSION}.tar.bz2 | \
+        tar -jx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared --enable-pic --disable-cli && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### x265 http://x265.org/
+RUN \
+        DIR=/tmp/x265 && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://download.videolan.org/pub/videolan/x265/x265_${X265_VERSION}.tar.gz  | \
+        tar -zx && \
+        cd x265_${X265_VERSION}/build/linux && \
+        sed -i "/-DEXTRA_LIB/ s/$/ -DCMAKE_INSTALL_PREFIX=\${PREFIX}/" multilib.sh && \
+        sed -i "/^cmake/ s/$/ -DENABLE_CLI=OFF/" multilib.sh && \
+        ./multilib.sh && \
+        make -C 8bit install && \
+        rm -rf ${DIR}
+### libogg https://www.xiph.org/ogg/
+RUN \
+        DIR=/tmp/ogg && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/ogg/libogg-${OGG_VERSION}.tar.gz && \
+        echo ${OGG_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libogg-${OGG_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libopus https://www.opus-codec.org/
+RUN \
+        DIR=/tmp/opus && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://archive.mozilla.org/pub/opus/opus-${OPUS_VERSION}.tar.gz && \
+        echo ${OPUS_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f opus-${OPUS_VERSION}.tar.gz && \
+        autoreconf -fiv && \
+        ./configure --prefix="${PREFIX}" --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libvorbis https://xiph.org/vorbis/
+RUN \
+        DIR=/tmp/vorbis && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/vorbis/libvorbis-${VORBIS_VERSION}.tar.gz && \
+        echo ${VORBIS_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libvorbis-${VORBIS_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --with-ogg="${PREFIX}" --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libtheora http://www.theora.org/
+RUN \
+        DIR=/tmp/theora && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/theora/libtheora-${THEORA_VERSION}.tar.gz && \
+        echo ${THEORA_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libtheora-${THEORA_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --with-ogg="${PREFIX}" --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libvpx https://www.webmproject.org/code/
+RUN \
+        DIR=/tmp/vpx && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://codeload.github.com/webmproject/libvpx/tar.gz/v${VPX_VERSION} | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-vp8 --enable-vp9 --enable-vp9-highbitdepth --enable-pic --enable-shared \
+        --disable-debug --disable-examples --disable-docs --disable-install-bins  && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libwebp https://developers.google.com/speed/webp/
+RUN \
+        DIR=/tmp/vebp && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://storage.googleapis.com/downloads.webmproject.org/releases/webp/libwebp-${WEBP_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### libmp3lame http://lame.sourceforge.net/
+RUN \
+        DIR=/tmp/lame && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://versaweb.dl.sourceforge.net/project/lame/lame/$(echo ${LAME_VERSION} | sed -e 's/[^0-9]*\([0-9]*\)[.]\([0-9]*\)[.]\([0-9]*\)\([0-9A-Za-z-]*\)/\1.\2/')/lame-${LAME_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --bindir="${PREFIX}/bin" --enable-shared --enable-nasm --disable-frontend && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### xvid https://www.xvid.com/
+RUN \
+        DIR=/tmp/xvid && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xvid.org/downloads/xvidcore-${XVID_VERSION}.tar.gz && \
+        echo ${XVID_SHA256SUM} | sha256sum --check && \
+        tar -zx -f xvidcore-${XVID_VERSION}.tar.gz && \
+        cd xvidcore/build/generic && \
+        ./configure --prefix="${PREFIX}" --bindir="${PREFIX}/bin" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+### fdk-aac https://github.com/mstorsjo/fdk-aac
+RUN \
+        DIR=/tmp/fdk-aac && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://github.com/mstorsjo/fdk-aac/archive/v${FDKAAC_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        autoreconf -fiv && \
+        ./configure --prefix="${PREFIX}" --enable-shared --datadir="${DIR}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+## openjpeg https://github.com/uclouvain/openjpeg
+RUN \
+        DIR=/tmp/openjpeg && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://github.com/uclouvain/openjpeg/archive/v${OPENJPEG_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        cmake -DBUILD_THIRDPARTY:BOOL=ON -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+## freetype https://www.freetype.org/
+RUN  \
+        DIR=/tmp/freetype && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://download.savannah.gnu.org/releases/freetype/freetype-${FREETYPE_VERSION}.tar.gz && \
+        echo ${FREETYPE_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f freetype-${FREETYPE_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+## libvstab https://github.com/georgmartius/vid.stab
+RUN  \
+        DIR=/tmp/vid.stab && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/georgmartius/vid.stab/archive/v${LIBVIDSTAB_VERSION}.tar.gz && \
+        echo ${LIBVIDSTAB_SHA256SUM} | sha256sum --check &&  \
+        tar -zx --strip-components=1 -f v${LIBVIDSTAB_VERSION}.tar.gz && \
+        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+## fridibi https://www.fribidi.org/
+RUN  \
+        DIR=/tmp/fribidi && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/fribidi/fribidi/archive/${FRIBIDI_VERSION}.tar.gz && \
+        echo ${FRIBIDI_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f ${FRIBIDI_VERSION}.tar.gz && \
+        sed -i 's/^SUBDIRS =.*/SUBDIRS=gen.tab charset lib bin/' Makefile.am && \
+        ./bootstrap --no-config --auto && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j1 && \
+        make install && \
+        rm -rf ${DIR}
+## kvazaar https://github.com/ultravideo/kvazaar
+RUN \
+        DIR=/tmp/kvazaar && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/ultravideo/kvazaar/archive/v${KVAZAAR_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f v${KVAZAAR_VERSION}.tar.gz && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/aom && \
+        git clone --branch ${AOM_VERSION} --depth 1 https://aomedia.googlesource.com/aom ${DIR} ; \
+        cd ${DIR} ; \
+        rm -rf CMakeCache.txt CMakeFiles ; \
+        mkdir -p ./aom_build ; \
+        cd ./aom_build ; \
+        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" -DBUILD_SHARED_LIBS=1 ..; \
+        make ; \
+        make install ; \
+        rm -rf ${DIR}
+
+## libxcb (and supporting libraries) for screen capture https://xcb.freedesktop.org/
+RUN \
+        DIR=/tmp/xorg-macros && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive//individual/util/util-macros-${XORG_MACROS_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f util-macros-${XORG_MACROS_VERSION}.tar.gz && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/xproto && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive/individual/proto/xproto-${XPROTO_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f xproto-${XPROTO_VERSION}.tar.gz && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libXau && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive/individual/lib/libXau-${XAU_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libXau-${XAU_VERSION}.tar.gz && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libpthread-stubs && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libxcb-proto && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/xcb-proto-${XCBPROTO_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f xcb-proto-${XCBPROTO_VERSION}.tar.gz && \
+        ACLOCAL_PATH="${PREFIX}/share/aclocal" ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libxcb && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/libxcb-${LIBXCB_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libxcb-${LIBXCB_VERSION}.tar.gz && \
+        ACLOCAL_PATH="${PREFIX}/share/aclocal" ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+## libzmq https://github.com/zeromq/libzmq/
+RUN \
+        DIR=/tmp/libzmq && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/zeromq/libzmq/archive/v${LIBZMQ_VERSION}.tar.gz && \
+        echo ${LIBZMQ_SHA256SUM} | sha256sum --check && \
+        tar -xz --strip-components=1 -f v${LIBZMQ_VERSION}.tar.gz && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" && \
+        make && \
+        make check && \
+        make install && \
+        rm -rf ${DIR}
+
+## libsrt https://github.com/Haivision/srt
+RUN \
+        DIR=/tmp/srt && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/Haivision/srt/archive/v${LIBSRT_VERSION}.tar.gz && \
+        tar -xz --strip-components=1 -f v${LIBSRT_VERSION}.tar.gz && \
+        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+## libpng
+RUN \
+        DIR=/tmp/png && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        git clone https://git.code.sf.net/p/libpng/code ${DIR} -b v${LIBPNG_VERSION} --depth 1 && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" && \
+        make check && \
+        make install && \
+        rm -rf ${DIR}
+
+## libaribb24
+RUN \
+        DIR=/tmp/b24 && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/nkoriyama/aribb24/archive/v${LIBARIBB24_VERSION}.tar.gz && \
+        echo ${LIBARIBB24_SHA256SUM} | sha256sum --check && \
+        tar -xz --strip-components=1 -f v${LIBARIBB24_VERSION}.tar.gz && \
+        autoreconf -fiv && \
+        ./configure CFLAGS="-I${PREFIX}/include -fPIC" --prefix="${PREFIX}" && \
+        make && \
+        make install && \
+        rm -rf ${DIR}
+
+## ffmpeg https://ffmpeg.org/
+RUN  \
+        DIR=/tmp/ffmpeg && mkdir -p ${DIR} && cd ${DIR} && \
+        curl -sLO https://ffmpeg.org/releases/ffmpeg-${FFMPEG_VERSION}.tar.bz2 && \
+        tar -jx --strip-components=1 -f ffmpeg-${FFMPEG_VERSION}.tar.bz2
+
+
+
+RUN \
+        DIR=/tmp/ffmpeg && mkdir -p ${DIR} && cd ${DIR} && \
+        ./configure \
+        --disable-debug \
+        --disable-doc \
+        --disable-ffplay \
+        --enable-shared \
+        --enable-avresample \
+        --enable-libopencore-amrnb \
+        --enable-libopencore-amrwb \
+        --enable-gpl \
+        --enable-libfreetype \
+        --enable-libvidstab \
+        --enable-libmp3lame \
+        --enable-libopus \
+        --enable-libtheora \
+        --enable-libvorbis \
+        --enable-libvpx \
+        --enable-libwebp \
+        --enable-libxcb \
+        --enable-libx265 \
+        --enable-libxvid \
+        --enable-libx264 \
+        --enable-nonfree \
+        --enable-openssl \
+        --enable-libfdk_aac \
+        --enable-postproc \
+        --enable-small \
+        --enable-version3 \
+        --enable-libzmq \
+        --extra-libs=-ldl \
+        --prefix="${PREFIX}" \
+        --enable-libopenjpeg \
+        --enable-libkvazaar \
+        --enable-libaom \
+        --extra-libs=-lpthread \
+        --enable-libsrt \
+        --enable-libaribb24 \
+        --enable-nvenc \
+        --enable-cuda \
+        --enable-cuvid \
+        --enable-libnpp \
+        --extra-cflags="-I${PREFIX}/include -I${PREFIX}/include/ffnvcodec -I/usr/local/cuda/include/" \
+        --extra-ldflags="-L${PREFIX}/lib -L/usr/local/cuda/lib64 -L/usr/local/cuda/lib32/" && \
+        make && \
+        make install && \
+        make tools/zmqsend && cp tools/zmqsend ${PREFIX}/bin/ && \
+        make distclean && \
+        hash -r && \
+        cd tools && \
+        make qt-faststart && cp qt-faststart ${PREFIX}/bin/
+
+## cleanup
+RUN \
+        LD_LIBRARY_PATH="${PREFIX}/lib:${PREFIX}/lib64:${LD_LIBRARY_PATH}" ldd ${PREFIX}/bin/ffmpeg | grep opt/ffmpeg | cut -d ' ' -f 3 | xargs -i cp {} /usr/local/lib/ && \
+        for lib in /usr/local/lib/*.so.*; do ln -s "${lib##*/}" "${lib%%.so.*}".so; done && \
+        cp ${PREFIX}/bin/* /usr/local/bin/ && \
+        cp -r ${PREFIX}/share/* /usr/local/share/ && \
+        LD_LIBRARY_PATH=/usr/local/lib ffmpeg -buildconf && \
+        cp -r ${PREFIX}/include/libav* ${PREFIX}/include/libpostproc ${PREFIX}/include/libsw* /usr/local/include && \
+        mkdir -p /usr/local/lib/pkgconfig && \
+        for pc in ${PREFIX}/lib/pkgconfig/libav*.pc ${PREFIX}/lib/pkgconfig/libpostproc.pc ${PREFIX}/lib/pkgconfig/libsw*.pc; do \
+          sed "s:${PREFIX}:/usr/local:g; s:/lib64:/lib:g" <"$pc" >/usr/local/lib/pkgconfig/"${pc##*/}"; \
+        done
+
+
+
+FROM        runtime-base AS release
+
+ENV         LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64
+
+CMD         ["--help"]
+ENTRYPOINT  ["ffmpeg"]
+
+# copy only needed files, without copying nvidia dev files 
+COPY --from=build /usr/local/bin /usr/local/bin/
+COPY --from=build /usr/local/share /usr/local/share/
+COPY --from=build /usr/local/lib /usr/local/lib/
+COPY --from=build /usr/local/include /usr/local/include/
+
+# Let's make sure the app built correctly
+# Convenient to verify on https://hub.docker.com/r/jrottenberg/ffmpeg/builds/ console output

docker/Dockerfile.ffmpeg.armv7

@@ -0,0 +1,490 @@
+# inspired by:
+# https://github.com/collelog/ffmpeg/blob/master/4.3.1-alpine-rpi4-arm64v8.Dockerfile
+# https://github.com/mmastrac/ffmpeg-omx-rpi-docker/blob/master/Dockerfile
+# https://github.com/jrottenberg/ffmpeg/pull/158/files
+# https://github.com/jrottenberg/ffmpeg/pull/239
+FROM        ubuntu:20.04 AS base
+
+WORKDIR     /tmp/workdir
+
+ENV     DEBIAN_FRONTEND=noninteractive
+RUN     apt-get -yqq update && \
+        apt-get install -yq --no-install-recommends ca-certificates expat libgomp1 && \
+        apt-get autoremove -y && \
+        apt-get clean -y
+
+FROM base as build
+
+ENV         FFMPEG_VERSION=4.3.1 \
+            AOM_VERSION=v1.0.0 \
+            FDKAAC_VERSION=0.1.5 \
+            FREETYPE_VERSION=2.5.5 \
+            FRIBIDI_VERSION=0.19.7 \
+            KVAZAAR_VERSION=1.2.0 \
+            LAME_VERSION=3.100 \
+            LIBPTHREAD_STUBS_VERSION=0.4 \
+            LIBVIDSTAB_VERSION=1.1.0 \
+            LIBXCB_VERSION=1.13.1 \
+            XCBPROTO_VERSION=1.13 \
+            OGG_VERSION=1.3.2 \
+            OPENCOREAMR_VERSION=0.1.5 \
+            OPUS_VERSION=1.2 \
+            OPENJPEG_VERSION=2.1.2 \
+            THEORA_VERSION=1.1.1 \
+            VORBIS_VERSION=1.3.5 \
+            VPX_VERSION=1.8.0 \
+            WEBP_VERSION=1.0.2 \
+            X264_VERSION=20170226-2245-stable \
+            X265_VERSION=3.1.1 \
+            XAU_VERSION=1.0.9 \
+            XORG_MACROS_VERSION=1.19.2 \
+            XPROTO_VERSION=7.0.31 \
+            XVID_VERSION=1.3.4 \
+            LIBZMQ_VERSION=4.3.3 \
+            SRC=/usr/local
+
+ARG         FREETYPE_SHA256SUM="5d03dd76c2171a7601e9ce10551d52d4471cf92cd205948e60289251daddffa8 freetype-2.5.5.tar.gz"
+ARG         FRIBIDI_SHA256SUM="3fc96fa9473bd31dcb5500bdf1aa78b337ba13eb8c301e7c28923fea982453a8 0.19.7.tar.gz"
+ARG         LIBVIDSTAB_SHA256SUM="14d2a053e56edad4f397be0cb3ef8eb1ec3150404ce99a426c4eb641861dc0bb v1.1.0.tar.gz"
+ARG         OGG_SHA256SUM="e19ee34711d7af328cb26287f4137e70630e7261b17cbe3cd41011d73a654692 libogg-1.3.2.tar.gz"
+ARG         OPUS_SHA256SUM="77db45a87b51578fbc49555ef1b10926179861d854eb2613207dc79d9ec0a9a9 opus-1.2.tar.gz"
+ARG         THEORA_SHA256SUM="40952956c47811928d1e7922cda3bc1f427eb75680c3c37249c91e949054916b libtheora-1.1.1.tar.gz"
+ARG         VORBIS_SHA256SUM="6efbcecdd3e5dfbf090341b485da9d176eb250d893e3eb378c428a2db38301ce libvorbis-1.3.5.tar.gz"
+ARG         XVID_SHA256SUM="4e9fd62728885855bc5007fe1be58df42e5e274497591fec37249e1052ae316f xvidcore-1.3.4.tar.gz"
+
+
+ARG         LD_LIBRARY_PATH=/opt/ffmpeg/lib
+ARG         MAKEFLAGS="-j2"
+ARG         PKG_CONFIG_PATH="/opt/ffmpeg/share/pkgconfig:/opt/ffmpeg/lib/pkgconfig:/opt/ffmpeg/lib64/pkgconfig:/opt/vc/lib/pkgconfig"
+ARG         PREFIX=/opt/ffmpeg
+ARG         LD_LIBRARY_PATH="/opt/ffmpeg/lib:/opt/ffmpeg/lib64:/usr/lib64:/usr/lib:/lib64:/lib:/opt/vc/lib"
+
+
+RUN      buildDeps="autoconf \
+                    automake \
+                    cmake \
+                    curl \
+                    bzip2 \
+                    libexpat1-dev \
+                    g++ \
+                    gcc \
+                    git \
+                    gperf \
+                    libtool \
+                    make \
+                    nasm \
+                    perl \
+                    pkg-config \
+                    python \
+                    sudo \
+                    libssl-dev \
+                    yasm \
+                    linux-headers-raspi2 \
+                    libomxil-bellagio-dev \
+                    libx265-dev \
+                    libaom-dev \
+                    zlib1g-dev" && \
+        apt-get -yqq update && \
+        apt-get install -yq --no-install-recommends ${buildDeps}
+## opencore-amr https://sourceforge.net/projects/opencore-amr/
+RUN \
+        DIR=/tmp/opencore-amr && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://versaweb.dl.sourceforge.net/project/opencore-amr/opencore-amr/opencore-amr-${OPENCOREAMR_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+## x264 http://www.videolan.org/developers/x264.html
+RUN \
+        DIR=/tmp/x264 && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://download.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-${X264_VERSION}.tar.bz2 | \
+        tar -jx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared --enable-pic --disable-cli && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+# ### x265 http://x265.org/
+# RUN \
+#         DIR=/tmp/x265 && \
+#         mkdir -p ${DIR} && \
+#         cd ${DIR} && \
+#         curl -sL https://download.videolan.org/pub/videolan/x265/x265_${X265_VERSION}.tar.gz  | \
+#         tar -zx && \
+#         cd x265_${X265_VERSION}/build/linux && \
+#         sed -i "/-DEXTRA_LIB/ s/$/ -DCMAKE_INSTALL_PREFIX=\${PREFIX}/" multilib.sh && \
+#         sed -i "/^cmake/ s/$/ -DENABLE_CLI=OFF/" multilib.sh && \
+#         # export CXXFLAGS="${CXXFLAGS} -fPIC" && \
+#         ./multilib.sh && \
+#         make -C 8bit install && \
+#         rm -rf ${DIR}
+### libogg https://www.xiph.org/ogg/
+RUN \
+        DIR=/tmp/ogg && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/ogg/libogg-${OGG_VERSION}.tar.gz && \
+        echo ${OGG_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libogg-${OGG_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libopus https://www.opus-codec.org/
+RUN \
+        DIR=/tmp/opus && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://archive.mozilla.org/pub/opus/opus-${OPUS_VERSION}.tar.gz && \
+        echo ${OPUS_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f opus-${OPUS_VERSION}.tar.gz && \
+        autoreconf -fiv && \
+        ./configure --prefix="${PREFIX}" --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libvorbis https://xiph.org/vorbis/
+RUN \
+        DIR=/tmp/vorbis && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/vorbis/libvorbis-${VORBIS_VERSION}.tar.gz && \
+        echo ${VORBIS_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libvorbis-${VORBIS_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --with-ogg="${PREFIX}" --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libtheora http://www.theora.org/
+RUN \
+        DIR=/tmp/theora && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xiph.org/releases/theora/libtheora-${THEORA_VERSION}.tar.gz && \
+        echo ${THEORA_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f libtheora-${THEORA_VERSION}.tar.gz && \
+        curl -sL 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD' -o config.guess && \
+        curl -sL 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD' -o config.sub && \
+        ./configure --prefix="${PREFIX}" --with-ogg="${PREFIX}" --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libvpx https://www.webmproject.org/code/
+RUN \
+        DIR=/tmp/vpx && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://codeload.github.com/webmproject/libvpx/tar.gz/v${VPX_VERSION} | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-vp8 --enable-vp9 --enable-vp9-highbitdepth --enable-pic --enable-shared \
+        --disable-debug --disable-examples --disable-docs --disable-install-bins  && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libwebp https://developers.google.com/speed/webp/
+RUN \
+        DIR=/tmp/vebp && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://storage.googleapis.com/downloads.webmproject.org/releases/webp/libwebp-${WEBP_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --enable-shared  && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### libmp3lame http://lame.sourceforge.net/
+RUN \
+        DIR=/tmp/lame && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://versaweb.dl.sourceforge.net/project/lame/lame/$(echo ${LAME_VERSION} | sed -e 's/[^0-9]*\([0-9]*\)[.]\([0-9]*\)[.]\([0-9]*\)\([0-9A-Za-z-]*\)/\1.\2/')/lame-${LAME_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        ./configure --prefix="${PREFIX}" --bindir="${PREFIX}/bin" --enable-shared --enable-nasm --disable-frontend && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### xvid https://www.xvid.com/
+RUN \
+        DIR=/tmp/xvid && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO http://downloads.xvid.org/downloads/xvidcore-${XVID_VERSION}.tar.gz && \
+        echo ${XVID_SHA256SUM} | sha256sum --check && \
+        tar -zx -f xvidcore-${XVID_VERSION}.tar.gz && \
+        cd xvidcore/build/generic && \
+        ./configure --prefix="${PREFIX}" --bindir="${PREFIX}/bin" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+### fdk-aac https://github.com/mstorsjo/fdk-aac
+RUN \
+        DIR=/tmp/fdk-aac && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://github.com/mstorsjo/fdk-aac/archive/v${FDKAAC_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        autoreconf -fiv && \
+        ./configure --prefix="${PREFIX}" --enable-shared --datadir="${DIR}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+## openjpeg https://github.com/uclouvain/openjpeg
+RUN \
+        DIR=/tmp/openjpeg && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sL https://github.com/uclouvain/openjpeg/archive/v${OPENJPEG_VERSION}.tar.gz | \
+        tar -zx --strip-components=1 && \
+        export CFLAGS="${CFLAGS} -DPNG_ARM_NEON_OPT=0" && \
+        cmake -DBUILD_THIRDPARTY:BOOL=ON -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+## freetype https://www.freetype.org/
+RUN  \
+        DIR=/tmp/freetype && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://download.savannah.gnu.org/releases/freetype/freetype-${FREETYPE_VERSION}.tar.gz && \
+        echo ${FREETYPE_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f freetype-${FREETYPE_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+## libvstab https://github.com/georgmartius/vid.stab
+RUN  \
+        DIR=/tmp/vid.stab && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/georgmartius/vid.stab/archive/v${LIBVIDSTAB_VERSION}.tar.gz && \
+        echo ${LIBVIDSTAB_SHA256SUM} | sha256sum --check &&  \
+        tar -zx --strip-components=1 -f v${LIBVIDSTAB_VERSION}.tar.gz && \
+        cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" . && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+## fridibi https://www.fribidi.org/
+RUN  \
+        DIR=/tmp/fribidi && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/fribidi/fribidi/archive/${FRIBIDI_VERSION}.tar.gz && \
+        echo ${FRIBIDI_SHA256SUM} | sha256sum --check && \
+        tar -zx --strip-components=1 -f ${FRIBIDI_VERSION}.tar.gz && \
+        sed -i 's/^SUBDIRS =.*/SUBDIRS=gen.tab charset lib bin/' Makefile.am && \
+        ./bootstrap --no-config --auto && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j1 && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+## kvazaar https://github.com/ultravideo/kvazaar
+RUN \
+        DIR=/tmp/kvazaar && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/ultravideo/kvazaar/archive/v${KVAZAAR_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f v${KVAZAAR_VERSION}.tar.gz && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+# RUN \
+#         DIR=/tmp/aom && \
+#         git clone --branch ${AOM_VERSION} --depth 1 https://aomedia.googlesource.com/aom ${DIR} ; \
+#         cd ${DIR} ; \
+#         rm -rf CMakeCache.txt CMakeFiles ; \
+#         mkdir -p ./aom_build ; \
+#         cd ./aom_build ; \
+#         cmake -DCMAKE_INSTALL_PREFIX="${PREFIX}" -DBUILD_SHARED_LIBS=1 ..; \
+#         make ; \
+#         make install ; \
+#         rm -rf ${DIR}
+
+## libxcb (and supporting libraries) for screen capture https://xcb.freedesktop.org/
+RUN \
+        DIR=/tmp/xorg-macros && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive//individual/util/util-macros-${XORG_MACROS_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f util-macros-${XORG_MACROS_VERSION}.tar.gz && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/xproto && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive/individual/proto/xproto-${XPROTO_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f xproto-${XPROTO_VERSION}.tar.gz && \
+        curl -sL 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD' -o config.guess && \
+        curl -sL 'http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD' -o config.sub && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libXau && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://www.x.org/archive/individual/lib/libXau-${XAU_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libXau-${XAU_VERSION}.tar.gz && \
+        ./configure --srcdir=${DIR} --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libpthread-stubs && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libpthread-stubs-${LIBPTHREAD_STUBS_VERSION}.tar.gz && \
+        ./configure --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libxcb-proto && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/xcb-proto-${XCBPROTO_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f xcb-proto-${XCBPROTO_VERSION}.tar.gz && \
+        ACLOCAL_PATH="${PREFIX}/share/aclocal" ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+RUN \
+        DIR=/tmp/libxcb && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://xcb.freedesktop.org/dist/libxcb-${LIBXCB_VERSION}.tar.gz && \
+        tar -zx --strip-components=1 -f libxcb-${LIBXCB_VERSION}.tar.gz && \
+        ACLOCAL_PATH="${PREFIX}/share/aclocal" ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" --disable-static --enable-shared && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+## libzmq https://github.com/zeromq/libzmq/
+RUN \
+        DIR=/tmp/libzmq && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        curl -sLO https://github.com/zeromq/libzmq/archive/v${LIBZMQ_VERSION}.tar.gz && \
+        tar -xz --strip-components=1 -f v${LIBZMQ_VERSION}.tar.gz && \
+        ./autogen.sh && \
+        ./configure --prefix="${PREFIX}" && \
+        make -j $(nproc) && \
+        # make check && \
+        make -j $(nproc) install && \
+        rm -rf ${DIR}
+
+## userland https://github.com/raspberrypi/userland
+RUN \
+        DIR=/tmp/userland && \
+        mkdir -p ${DIR} && \
+        cd ${DIR} && \
+        git clone --depth 1 https://github.com/raspberrypi/userland.git . && \
+        ./buildme && \
+        rm -rf ${DIR}
+
+## ffmpeg https://ffmpeg.org/
+RUN  \
+        DIR=/tmp/ffmpeg && mkdir -p ${DIR} && cd ${DIR} && \
+        curl -sLO https://ffmpeg.org/releases/ffmpeg-${FFMPEG_VERSION}.tar.bz2 && \
+        tar -jx --strip-components=1 -f ffmpeg-${FFMPEG_VERSION}.tar.bz2
+
+RUN \
+        DIR=/tmp/ffmpeg && mkdir -p ${DIR} && cd ${DIR} && \
+        ./configure \
+        --disable-debug \
+        --disable-doc \
+        --disable-ffplay \
+        --enable-shared \
+        --enable-avresample \
+        --enable-libopencore-amrnb \
+        --enable-libopencore-amrwb \
+        --enable-gpl \
+        --enable-libfreetype \
+        --enable-libvidstab \
+        --enable-libmp3lame \
+        --enable-libopus \
+        --enable-libtheora \
+        --enable-libvorbis \
+        --enable-libvpx \
+        --enable-libwebp \
+        --enable-libxcb \
+        --enable-libx265 \
+        --enable-libxvid \
+        --enable-libx264 \
+        --enable-nonfree \
+        --enable-openssl \
+        --enable-libfdk_aac \
+        --enable-postproc \
+        --enable-small \
+        --enable-version3 \
+        --enable-libzmq \
+        --extra-libs=-ldl \
+        --prefix="${PREFIX}" \
+        --enable-libopenjpeg \
+        --enable-libkvazaar \
+        --enable-libaom \
+        --extra-libs=-lpthread \
+        --enable-omx \
+        --enable-omx-rpi \
+        --enable-mmal \
+        --enable-v4l2_m2m \
+        --enable-neon \
+        --extra-cflags="-I${PREFIX}/include" \
+        --extra-ldflags="-L${PREFIX}/lib" && \
+        make -j $(nproc) && \
+        make -j $(nproc) install && \
+        make tools/zmqsend && cp tools/zmqsend ${PREFIX}/bin/ && \
+        make distclean && \
+        hash -r && \
+        cd tools && \
+        make qt-faststart && cp qt-faststart ${PREFIX}/bin/
+
+## cleanup
+RUN \
+        ldd ${PREFIX}/bin/ffmpeg | grep opt/ffmpeg | cut -d ' ' -f 3 | xargs -i cp {} /usr/local/lib/ && \
+        # copy userland lib too
+        ldd ${PREFIX}/bin/ffmpeg | grep opt/vc | cut -d ' ' -f 3 | xargs -i cp {} /usr/local/lib/ && \
+        for lib in /usr/local/lib/*.so.*; do ln -s "${lib##*/}" "${lib%%.so.*}".so; done && \
+        cp ${PREFIX}/bin/* /usr/local/bin/ && \
+        cp -r ${PREFIX}/share/ffmpeg /usr/local/share/ && \
+        LD_LIBRARY_PATH=/usr/local/lib ffmpeg -buildconf && \
+        cp -r ${PREFIX}/include/libav* ${PREFIX}/include/libpostproc ${PREFIX}/include/libsw* /usr/local/include && \
+        mkdir -p /usr/local/lib/pkgconfig && \
+        for pc in ${PREFIX}/lib/pkgconfig/libav*.pc ${PREFIX}/lib/pkgconfig/libpostproc.pc ${PREFIX}/lib/pkgconfig/libsw*.pc; do \
+          sed "s:${PREFIX}:/usr/local:g" <"$pc" >/usr/local/lib/pkgconfig/"${pc##*/}"; \
+        done
+
+FROM        base AS release
+
+ENV         LD_LIBRARY_PATH=/usr/local/lib:/usr/local/lib64:/usr/lib:/usr/lib64:/lib:/lib64
+
+RUN \
+        apt-get -yqq update && \
+        apt-get install -yq --no-install-recommends libx265-dev libaom-dev && \
+        apt-get autoremove -y && \
+        apt-get clean -y
+
+CMD         ["--help"]
+ENTRYPOINT  ["ffmpeg"]
+
+COPY --from=build /usr/local /usr/local/

docker/Dockerfile.web

@@ -0,0 +1,9 @@
+ARG NODE_VERSION=14.0
+
+FROM node:${NODE_VERSION}
+
+WORKDIR /opt/frigate
+
+COPY . .
+
+RUN npm install && npm run build

docker/Dockerfile.wheels

@@ -0,0 +1,42 @@
+FROM ubuntu:20.04 as build
+
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get -qq update \
+    && apt-get -qq install -y \
+    python3 \
+    python3-dev \
+    wget \
+    # opencv dependencies
+    build-essential cmake git pkg-config libgtk-3-dev \
+    libavcodec-dev libavformat-dev libswscale-dev libv4l-dev \
+    libxvidcore-dev libx264-dev libjpeg-dev libpng-dev libtiff-dev \
+    gfortran openexr libatlas-base-dev libssl-dev\
+    libtbb2 libtbb-dev libdc1394-22-dev libopenexr-dev \
+    libgstreamer-plugins-base1.0-dev libgstreamer1.0-dev \
+    # scipy dependencies
+    gcc gfortran libopenblas-dev liblapack-dev cython
+
+RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
+    && python3 get-pip.py "pip==20.2.4"
+
+RUN pip3 install scikit-build
+
+RUN pip3 wheel --wheel-dir=/wheels \
+    opencv-python-headless \
+    # pinning due to issue in 1.19.5 https://github.com/numpy/numpy/issues/18131
+    numpy==1.19.4 \
+    imutils \
+    scipy \
+    psutil \
+    Flask \
+    paho-mqtt \
+    PyYAML \
+    matplotlib \
+    click \
+    setproctitle \
+    peewee
+
+FROM scratch
+
+COPY --from=build /wheels /wheels

docker/hailo8l/user_installation.sh

@@ -1,49 +0,0 @@
-#!/bin/bash
-
-# Update package list and install dependencies
-sudo apt-get update
-sudo apt-get install -y build-essential cmake git wget
-
-hailo_version="4.21.0"
-arch=$(uname -m)
-
-if [[ $arch == "x86_64" ]]; then
-    sudo apt install -y linux-headers-$(uname -r);
-else
-    sudo apt install -y linux-modules-extra-$(uname -r);
-fi
-
-# Clone the HailoRT driver repository
-git clone --depth 1 --branch v${hailo_version} https://github.com/hailo-ai/hailort-drivers.git
-
-# Build and install the HailoRT driver
-cd hailort-drivers/linux/pcie
-sudo make all
-sudo make install
-
-# Load the Hailo PCI driver
-sudo modprobe hailo_pci
-
-if [ $? -ne 0 ]; then
-  echo "Unable to load hailo_pci module, common reasons for this are:"
-  echo "- Key was rejected by service: Secure Boot is enabling disallowing install."
-  echo "- Permissions are not setup correctly."
-  exit 1
-fi
-
-# Download and install the firmware
-cd ../../
-./download_firmware.sh
-
-# verify the firmware folder is present
-if [ ! -d /lib/firmware/hailo ]; then
-  sudo mkdir /lib/firmware/hailo
-fi
-sudo mv hailo8_fw.*.bin /lib/firmware/hailo/hailo8_fw.bin
-
-# Install udev rules
-sudo cp ./linux/pcie/51-hailo-udev.rules /etc/udev/rules.d/
-sudo udevadm control --reload-rules && sudo udevadm trigger
-
-echo "HailoRT driver installation complete."
-echo "reboot your system to load the firmware!"

docker/main/Dockerfile

@@ -1,340 +0,0 @@
-# syntax=docker/dockerfile:1.6
-
-# https://askubuntu.com/questions/972516/debian-frontend-environment-variable
-ARG DEBIAN_FRONTEND=noninteractive
-
-# Globally set pip break-system-packages option to avoid having to specify it every time
-ARG PIP_BREAK_SYSTEM_PACKAGES=1
-
-ARG BASE_IMAGE=debian:12
-ARG SLIM_BASE=debian:12-slim
-
-# A hook that allows us to inject commands right after the base images
-ARG BASE_HOOK=
-
-FROM ${BASE_IMAGE} AS base
-ARG PIP_BREAK_SYSTEM_PACKAGES
-ARG BASE_HOOK
-
-RUN sh -c "$BASE_HOOK"
-
-FROM --platform=${BUILDPLATFORM} debian:12 AS base_host
-ARG PIP_BREAK_SYSTEM_PACKAGES
-
-FROM ${SLIM_BASE} AS slim-base
-ARG PIP_BREAK_SYSTEM_PACKAGES
-ARG BASE_HOOK
-
-RUN sh -c "$BASE_HOOK"
-
-FROM slim-base AS wget
-ARG DEBIAN_FRONTEND
-RUN apt-get update \
-    && apt-get install -y wget xz-utils \
-    && rm -rf /var/lib/apt/lists/*
-WORKDIR /rootfs
-
-FROM base AS nginx
-ARG DEBIAN_FRONTEND
-ENV CCACHE_DIR /root/.ccache
-ENV CCACHE_MAXSIZE 2G
-
-RUN --mount=type=bind,source=docker/main/build_nginx.sh,target=/deps/build_nginx.sh \
-    /deps/build_nginx.sh
-
-FROM wget AS sqlite-vec
-ARG DEBIAN_FRONTEND
-
-# Build sqlite_vec from source
-COPY docker/main/build_sqlite_vec.sh /deps/build_sqlite_vec.sh
-RUN --mount=type=tmpfs,target=/tmp --mount=type=tmpfs,target=/var/cache/apt \
-    --mount=type=bind,source=docker/main/build_sqlite_vec.sh,target=/deps/build_sqlite_vec.sh \
-    --mount=type=cache,target=/root/.ccache \
-    /deps/build_sqlite_vec.sh
-
-FROM scratch AS go2rtc
-ARG TARGETARCH
-WORKDIR /rootfs/usr/local/go2rtc/bin
-ADD --link --chmod=755 "https://github.com/AlexxIT/go2rtc/releases/download/v1.9.10/go2rtc_linux_${TARGETARCH}" go2rtc
-
-FROM wget AS tempio
-ARG TARGETARCH
-RUN --mount=type=bind,source=docker/main/install_tempio.sh,target=/deps/install_tempio.sh \
-    /deps/install_tempio.sh
-
-####
-#
-# OpenVino Support
-#
-# 1. Download and convert a model from Intel's Public Open Model Zoo
-#
-####
-# Download and Convert OpenVino model
-FROM base_host AS ov-converter
-ARG DEBIAN_FRONTEND
-
-# Install OpenVino Runtime and Dev library
-COPY docker/main/requirements-ov.txt /requirements-ov.txt
-RUN apt-get -qq update \
-    && apt-get -qq install -y wget python3 python3-dev python3-distutils gcc pkg-config libhdf5-dev \
-    && wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
-    && sed -i 's/args.append("setuptools")/args.append("setuptools==77.0.3")/' get-pip.py \
-    && python3 get-pip.py "pip" \
-    && pip3 install -r /requirements-ov.txt
-
-# Get OpenVino Model
-RUN --mount=type=bind,source=docker/main/build_ov_model.py,target=/build_ov_model.py \
-    mkdir /models && cd /models \
-    && wget http://download.tensorflow.org/models/object_detection/ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz \
-    && tar -xvf ssdlite_mobilenet_v2_coco_2018_05_09.tar.gz \
-    && python3 /build_ov_model.py
-
-####
-#
-# Coral Compatibility
-#
-# Builds libusb without udev. Needed for synology and other devices with USB coral
-####
-# libUSB - No Udev
-FROM wget as libusb-build
-ARG TARGETARCH
-ARG DEBIAN_FRONTEND
-ENV CCACHE_DIR /root/.ccache
-ENV CCACHE_MAXSIZE 2G
-
-# Build libUSB without udev.  Needed for Openvino NCS2 support
-WORKDIR /opt
-RUN apt-get update && apt-get install -y unzip build-essential automake libtool ccache pkg-config
-RUN --mount=type=cache,target=/root/.ccache wget -q https://github.com/libusb/libusb/archive/v1.0.26.zip -O v1.0.26.zip && \
-    unzip v1.0.26.zip && cd libusb-1.0.26 && \
-    ./bootstrap.sh && \
-    ./configure CC='ccache gcc' CCX='ccache g++' --disable-udev --enable-shared && \
-    make -j $(nproc --all)
-RUN apt-get update && \
-    apt-get install -y --no-install-recommends libusb-1.0-0-dev && \
-    rm -rf /var/lib/apt/lists/*
-WORKDIR /opt/libusb-1.0.26/libusb
-RUN /bin/mkdir -p '/usr/local/lib' && \
-    /bin/bash ../libtool  --mode=install /usr/bin/install -c libusb-1.0.la '/usr/local/lib' && \
-    /bin/mkdir -p '/usr/local/include/libusb-1.0' && \
-    /usr/bin/install -c -m 644 libusb.h '/usr/local/include/libusb-1.0' && \
-    /bin/mkdir -p '/usr/local/lib/pkgconfig' && \
-    cd  /opt/libusb-1.0.26/ && \
-    /usr/bin/install -c -m 644 libusb-1.0.pc '/usr/local/lib/pkgconfig' && \
-    ldconfig
-
-FROM wget AS models
-
-# Get model and labels
-RUN wget -qO edgetpu_model.tflite https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess_edgetpu.tflite
-RUN wget -qO cpu_model.tflite https://github.com/google-coral/test_data/raw/release-frogfish/ssdlite_mobiledet_coco_qat_postprocess.tflite
-COPY labelmap.txt .
-# Copy OpenVino model
-COPY --from=ov-converter /models/ssdlite_mobilenet_v2.xml openvino-model/
-COPY --from=ov-converter /models/ssdlite_mobilenet_v2.bin openvino-model/
-RUN wget -q https://github.com/openvinotoolkit/open_model_zoo/raw/master/data/dataset_classes/coco_91cl_bkgr.txt -O openvino-model/coco_91cl_bkgr.txt && \
-    sed -i 's/truck/car/g' openvino-model/coco_91cl_bkgr.txt
-# Get Audio Model and labels
-RUN wget -qO - https://www.kaggle.com/api/v1/models/google/yamnet/tfLite/classification-tflite/1/download | tar xvz && mv 1.tflite cpu_audio_model.tflite
-COPY audio-labelmap.txt .
-
-
-FROM wget AS s6-overlay
-ARG TARGETARCH
-RUN --mount=type=bind,source=docker/main/install_s6_overlay.sh,target=/deps/install_s6_overlay.sh \
-    /deps/install_s6_overlay.sh
-
-
-FROM base AS wheels
-ARG DEBIAN_FRONTEND
-ARG TARGETARCH
-ARG DEBUG=false
-
-# Use a separate container to build wheels to prevent build dependencies in final image
-RUN apt-get -qq update \
-    && apt-get -qq install -y \
-    apt-transport-https wget unzip \
-    && apt-get -qq update \
-    && apt-get -qq install -y \
-    python3.11 \
-    python3.11-dev \
-    # opencv dependencies
-    build-essential cmake git pkg-config libgtk-3-dev \
-    libavcodec-dev libavformat-dev libswscale-dev libv4l-dev \
-    libxvidcore-dev libx264-dev libjpeg-dev libpng-dev libtiff-dev \
-    gfortran openexr libatlas-base-dev libssl-dev\
-    libtbbmalloc2 libtbb-dev libdc1394-dev libopenexr-dev \
-    libgstreamer-plugins-base1.0-dev libgstreamer1.0-dev \
-    # sqlite3 dependencies
-    tclsh \
-    # scipy dependencies
-    gcc gfortran libopenblas-dev liblapack-dev && \
-    rm -rf /var/lib/apt/lists/*
-
-RUN update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.11 1
-
-RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
-    && sed -i 's/args.append("setuptools")/args.append("setuptools==77.0.3")/' get-pip.py \
-    && python3 get-pip.py "pip"
-
-COPY docker/main/requirements.txt /requirements.txt
-COPY docker/main/requirements-dev.txt /requirements-dev.txt
-
-RUN pip3 install -r /requirements.txt
-
-# Build pysqlite3 from source
-COPY docker/main/build_pysqlite3.sh /build_pysqlite3.sh
-RUN /build_pysqlite3.sh
-
-COPY docker/main/requirements-wheels.txt /requirements-wheels.txt
-RUN pip3 wheel --wheel-dir=/wheels -r /requirements-wheels.txt && \
-    if [ "$DEBUG" = "true" ]; then \
-        pip3 wheel --wheel-dir=/wheels -r /requirements-dev.txt; \
-    fi
-
-# Install HailoRT & Wheels
-RUN --mount=type=bind,source=docker/main/install_hailort.sh,target=/deps/install_hailort.sh \
-    /deps/install_hailort.sh
-
-# Collect deps in a single layer
-FROM scratch AS deps-rootfs
-COPY --from=nginx /usr/local/nginx/ /usr/local/nginx/
-COPY --from=sqlite-vec /usr/local/lib/ /usr/local/lib/
-COPY --from=go2rtc /rootfs/ /
-COPY --from=libusb-build /usr/local/lib /usr/local/lib
-COPY --from=tempio /rootfs/ /
-COPY --from=s6-overlay /rootfs/ /
-COPY --from=models /rootfs/ /
-COPY --from=wheels /rootfs/ /
-COPY docker/main/rootfs/ /
-
-
-# Frigate deps (ffmpeg, python, nginx, go2rtc, s6-overlay, etc)
-FROM slim-base AS deps
-ARG TARGETARCH
-ARG BASE_IMAGE
-
-ARG DEBIAN_FRONTEND
-# http://stackoverflow.com/questions/48162574/ddg#49462622
-ARG APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=DontWarn
-
-# https://github.com/NVIDIA/nvidia-docker/wiki/Installation-(Native-GPU-Support)
-ENV NVIDIA_VISIBLE_DEVICES=all
-ENV NVIDIA_DRIVER_CAPABILITIES="compute,video,utility"
-
-# Disable tokenizer parallelism warning
-# https://stackoverflow.com/questions/62691279/how-to-disable-tokenizers-parallelism-true-false-warning/72926996#72926996
-ENV TOKENIZERS_PARALLELISM=true
-# https://github.com/huggingface/transformers/issues/27214
-ENV TRANSFORMERS_NO_ADVISORY_WARNINGS=1
-
-# Set OpenCV ffmpeg loglevel to fatal: https://ffmpeg.org/doxygen/trunk/log_8h.html
-ENV OPENCV_FFMPEG_LOGLEVEL=8
-
-# Set NumPy to ignore getlimits warning
-ENV PYTHONWARNINGS="ignore:::numpy.core.getlimits"
-
-# Set HailoRT to disable logging
-ENV HAILORT_LOGGER_PATH=NONE
-
-# TensorFlow error only
-ENV TF_CPP_MIN_LOG_LEVEL=3
-
-ENV PATH="/usr/local/go2rtc/bin:/usr/local/tempio/bin:/usr/local/nginx/sbin:${PATH}"
-
-# Install dependencies
-RUN --mount=type=bind,source=docker/main/install_deps.sh,target=/deps/install_deps.sh \
-    /deps/install_deps.sh
-
-ENV DEFAULT_FFMPEG_VERSION="7.0"
-ENV INCLUDED_FFMPEG_VERSIONS="${DEFAULT_FFMPEG_VERSION}:5.0"
-
-RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
-    && sed -i 's/args.append("setuptools")/args.append("setuptools==77.0.3")/' get-pip.py \
-    && python3 get-pip.py "pip"
-
-RUN --mount=type=bind,from=wheels,source=/wheels,target=/deps/wheels \
-    pip3 install -U /deps/wheels/*.whl
-
-# Install MemryX runtime (requires libgomp (OpenMP) in the final docker image)
-RUN --mount=type=bind,source=docker/main/install_memryx.sh,target=/deps/install_memryx.sh \
-    bash -c "bash /deps/install_memryx.sh"
-
-COPY --from=deps-rootfs / /
-
-RUN ldconfig
-
-EXPOSE 5000
-EXPOSE 8554
-EXPOSE 8555/tcp 8555/udp
-
-# Configure logging to prepend timestamps, log to stdout, keep 0 archives and rotate on 10MB
-ENV S6_LOGGING_SCRIPT="T 1 n0 s10000000 T"
-# Do not fail on long-running download scripts
-ENV S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0
-
-ENTRYPOINT ["/init"]
-CMD []
-
-HEALTHCHECK --start-period=300s --start-interval=5s --interval=15s --timeout=5s --retries=3 \
-    CMD test -f /dev/shm/.frigate-is-stopping && exit 0; curl --fail --silent --show-error http://127.0.0.1:5000/api/version || exit 1
-
-# Frigate deps with Node.js and NPM for devcontainer
-FROM deps AS devcontainer
-
-# Do not start the actual Frigate service on devcontainer as it will be started by VS Code
-# But start a fake service for simulating the logs
-COPY docker/main/fake_frigate_run /etc/s6-overlay/s6-rc.d/frigate/run
-
-# Create symbolic link to the frigate source code, as go2rtc's create_config.sh uses it
-RUN mkdir -p /opt/frigate \
-    && ln -svf /workspace/frigate/frigate /opt/frigate/frigate
-
-# Install Node 20
-RUN curl -SLO https://deb.nodesource.com/nsolid_setup_deb.sh && \
-    chmod 500 nsolid_setup_deb.sh && \
-    ./nsolid_setup_deb.sh 20 && \
-    apt-get install nodejs -y \
-    && rm -rf /var/lib/apt/lists/* \
-    && npm install -g npm@10
-
-WORKDIR /workspace/frigate
-
-RUN apt-get update \
-    && apt-get install make -y \
-    && rm -rf /var/lib/apt/lists/*
-
-RUN --mount=type=bind,source=./docker/main/requirements-dev.txt,target=/workspace/frigate/requirements-dev.txt \
-    pip3 install -r requirements-dev.txt
-
-HEALTHCHECK NONE
-
-CMD ["sleep", "infinity"]
-
-
-# Frigate web build
-# This should be architecture agnostic, so speed up the build on multiarch by not using QEMU.
-FROM --platform=$BUILDPLATFORM node:20 AS web-build
-
-WORKDIR /work
-COPY web/package.json web/package-lock.json ./
-RUN npm install
-
-COPY web/ ./
-RUN npm run build \
-    && mv dist/BASE_PATH/monacoeditorwork/* dist/assets/ \
-    && rm -rf dist/BASE_PATH
-
-# Collect final files in a single layer
-FROM scratch AS rootfs
-
-WORKDIR /opt/frigate/
-COPY frigate frigate/
-COPY migrations migrations/
-COPY --from=web-build /work/dist/ web/
-
-# Frigate final container
-FROM deps AS frigate
-
-WORKDIR /opt/frigate/
-COPY --from=rootfs / /

docker/main/build_nginx.sh

@@ -1,86 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-NGINX_VERSION="1.27.4"
-VOD_MODULE_VERSION="1.31"
-SECURE_TOKEN_MODULE_VERSION="1.5"
-SET_MISC_MODULE_VERSION="v0.33"
-NGX_DEVEL_KIT_VERSION="v0.3.3"
-
-source /etc/os-release
-
-if [[ "$VERSION_ID" == "12" ]]; then
-    sed -i '/^Types:/s/deb/& deb-src/' /etc/apt/sources.list.d/debian.sources
-else
-    cp /etc/apt/sources.list /etc/apt/sources.list.d/sources-src.list
-    sed -i 's|deb http|deb-src http|g' /etc/apt/sources.list.d/sources-src.list
-fi
-
-apt-get update
-apt-get -yqq build-dep nginx
-
-apt-get -yqq install --no-install-recommends ca-certificates wget
-update-ca-certificates -f
-apt install -y ccache
-
-export PATH="/usr/lib/ccache:$PATH"
-
-mkdir /tmp/nginx
-wget -nv https://nginx.org/download/nginx-${NGINX_VERSION}.tar.gz
-tar -zxf nginx-${NGINX_VERSION}.tar.gz -C /tmp/nginx --strip-components=1
-rm nginx-${NGINX_VERSION}.tar.gz
-mkdir /tmp/nginx-vod-module
-wget -nv https://github.com/kaltura/nginx-vod-module/archive/refs/tags/${VOD_MODULE_VERSION}.tar.gz
-tar -zxf ${VOD_MODULE_VERSION}.tar.gz -C /tmp/nginx-vod-module --strip-components=1
-rm ${VOD_MODULE_VERSION}.tar.gz
-    # Patch MAX_CLIPS to allow more clips to be added than the default 128
-sed -i 's/MAX_CLIPS (128)/MAX_CLIPS (1080)/g' /tmp/nginx-vod-module/vod/media_set.h
-patch -d /tmp/nginx-vod-module/ -p1 << 'EOF'
---- a/vod/avc_hevc_parser.c       2022-06-27 11:38:10.000000000 +0000
-+++ b/vod/avc_hevc_parser.c       2023-01-16 11:25:10.900521298 +0000
-@@ -3,6 +3,9 @@
- bool_t
- avc_hevc_parser_rbsp_trailing_bits(bit_reader_state_t* reader)
- {
-+	// https://github.com/blakeblackshear/frigate/issues/4572
-+	return TRUE;
-+
- 	uint32_t one_bit;
-
- 	if (reader->stream.eof_reached)
-EOF
-
-
-mkdir /tmp/nginx-secure-token-module
-wget https://github.com/kaltura/nginx-secure-token-module/archive/refs/tags/${SECURE_TOKEN_MODULE_VERSION}.tar.gz
-tar -zxf ${SECURE_TOKEN_MODULE_VERSION}.tar.gz -C /tmp/nginx-secure-token-module --strip-components=1
-rm ${SECURE_TOKEN_MODULE_VERSION}.tar.gz
-
-mkdir /tmp/ngx_devel_kit
-wget https://github.com/vision5/ngx_devel_kit/archive/refs/tags/${NGX_DEVEL_KIT_VERSION}.tar.gz
-tar -zxf ${NGX_DEVEL_KIT_VERSION}.tar.gz -C /tmp/ngx_devel_kit --strip-components=1
-rm ${NGX_DEVEL_KIT_VERSION}.tar.gz
-
-mkdir /tmp/nginx-set-misc-module
-wget https://github.com/openresty/set-misc-nginx-module/archive/refs/tags/${SET_MISC_MODULE_VERSION}.tar.gz
-tar -zxf ${SET_MISC_MODULE_VERSION}.tar.gz -C /tmp/nginx-set-misc-module --strip-components=1
-rm ${SET_MISC_MODULE_VERSION}.tar.gz
-
-cd /tmp/nginx
-
-./configure --prefix=/usr/local/nginx \
-    --with-file-aio \
-    --with-http_sub_module \
-    --with-http_ssl_module \
-    --with-http_auth_request_module \
-    --with-http_realip_module \
-    --with-threads \
-    --add-module=../ngx_devel_kit \
-    --add-module=../nginx-set-misc-module \
-    --add-module=../nginx-vod-module \
-    --add-module=../nginx-secure-token-module \
-    --with-cc-opt="-O3 -Wno-error=implicit-fallthrough"
-
-make CC="ccache gcc" -j$(nproc) && make install
-rm -rf /usr/local/nginx/html /usr/local/nginx/conf/*.default

docker/main/build_ov_model.py

@@ -1,11 +0,0 @@
-import openvino as ov
-from openvino.tools import mo
-
-ov_model = mo.convert_model(
-    "/models/ssdlite_mobilenet_v2_coco_2018_05_09/frozen_inference_graph.pb",
-    compress_to_fp16=True,
-    transformations_config="/usr/local/lib/python3.11/dist-packages/openvino/tools/mo/front/tf/ssd_v2_support.json",
-    tensorflow_object_detection_api_pipeline_config="/models/ssdlite_mobilenet_v2_coco_2018_05_09/pipeline.config",
-    reverse_input_channels=True,
-)
-ov.save_model(ov_model, "/models/ssdlite_mobilenet_v2.xml")

docker/main/build_pysqlite3.sh

@@ -1,42 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-SQLITE3_VERSION="3.46.1"
-PYSQLITE3_VERSION="0.5.3"
-
-# Fetch the pre-built sqlite amalgamation instead of building from source
-if [[ ! -d "sqlite" ]]; then
-  mkdir sqlite
-  cd sqlite
-  
-  # Download the pre-built amalgamation from sqlite.org
-  # For SQLite 3.46.1, the amalgamation version is 3460100
-  SQLITE_AMALGAMATION_VERSION="3460100"
-  
-  wget https://www.sqlite.org/2024/sqlite-amalgamation-${SQLITE_AMALGAMATION_VERSION}.zip -O sqlite-amalgamation.zip
-  unzip sqlite-amalgamation.zip
-  mv sqlite-amalgamation-${SQLITE_AMALGAMATION_VERSION}/* .
-  rmdir sqlite-amalgamation-${SQLITE_AMALGAMATION_VERSION}
-  rm sqlite-amalgamation.zip
-  
-  cd ../
-fi
-
-# Grab the pysqlite3 source code.
-if [[ ! -d "./pysqlite3" ]]; then
-  git clone https://github.com/coleifer/pysqlite3.git
-fi
-
-cd pysqlite3/
-git checkout ${PYSQLITE3_VERSION}
-
-# Copy the sqlite3 source amalgamation into the pysqlite3 directory so we can
-# create a self-contained extension module.
-cp "../sqlite/sqlite3.c" ./
-cp "../sqlite/sqlite3.h" ./
-
-# Create the wheel and put it in the /wheels dir.
-sed -i "s|name='pysqlite3-binary'|name=PACKAGE_NAME|g" setup.py
-python3 setup.py build_static
-pip3 wheel . -w /wheels

docker/main/build_sqlite_vec.sh

@@ -1,38 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-SQLITE_VEC_VERSION="0.1.3"
-
-source /etc/os-release
-
-if [[ "$VERSION_ID" == "12" ]]; then
-    sed -i '/^Types:/s/deb/& deb-src/' /etc/apt/sources.list.d/debian.sources
-else
-    cp /etc/apt/sources.list /etc/apt/sources.list.d/sources-src.list
-    sed -i 's|deb http|deb-src http|g' /etc/apt/sources.list.d/sources-src.list
-fi
-
-apt-get update
-apt-get -yqq build-dep sqlite3 gettext git
-
-mkdir /tmp/sqlite_vec
-# Grab the sqlite_vec source code.
-wget -nv https://github.com/asg017/sqlite-vec/archive/refs/tags/v${SQLITE_VEC_VERSION}.tar.gz
-tar -zxf v${SQLITE_VEC_VERSION}.tar.gz -C /tmp/sqlite_vec
-
-cd /tmp/sqlite_vec/sqlite-vec-${SQLITE_VEC_VERSION}
-
-mkdir -p vendor
-wget -O sqlite-amalgamation.zip https://www.sqlite.org/2024/sqlite-amalgamation-3450300.zip
-unzip sqlite-amalgamation.zip
-mv sqlite-amalgamation-3450300/* vendor/
-rmdir sqlite-amalgamation-3450300
-rm sqlite-amalgamation.zip
-
-# build loadable module
-make loadable
-
-# install it
-cp dist/vec0.* /usr/local/lib
-

docker/main/fake_frigate_run

@@ -1,13 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Start the fake Frigate service
-
-set -o errexit -o nounset -o pipefail
-
-# Tell S6-Overlay not to restart this service
-s6-svc -O .
-
-while true; do
-  echo "[INFO] The fake Frigate service is running..."
-  sleep 5s
-done

docker/main/install_deps.sh

@@ -1,149 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-apt-get -qq update
-
-apt-get -qq install --no-install-recommends -y \
-    apt-transport-https \
-    ca-certificates \
-    gnupg \
-    wget \
-    lbzip2 \
-    procps vainfo \
-    unzip locales tzdata libxml2 xz-utils \
-    python3.11 \
-    curl \
-    lsof \
-    jq \
-    nethogs \
-    libgl1 \
-    libglib2.0-0 \
-    libusb-1.0.0 \
-    libgomp1  # memryx detector
-
-update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.11 1
-
-mkdir -p -m 600 /root/.gnupg
-
-# install coral runtime
-wget -q -O /tmp/libedgetpu1-max.deb "https://github.com/feranick/libedgetpu/releases/download/16.0TF2.17.1-1/libedgetpu1-max_16.0tf2.17.1-1.bookworm_${TARGETARCH}.deb"
-unset DEBIAN_FRONTEND
-yes | dpkg -i /tmp/libedgetpu1-max.deb && export DEBIAN_FRONTEND=noninteractive
-rm /tmp/libedgetpu1-max.deb
-
-# install mesa-teflon-delegate from bookworm-backports
-# Only available for arm64 at the moment
-if [[ "${TARGETARCH}" == "arm64" ]]; then
-    if [[ "${BASE_IMAGE}" == *"nvcr.io/nvidia/tensorrt"* ]]; then
-        echo "Info: Skipping apt-get commands because BASE_IMAGE includes 'nvcr.io/nvidia/tensorrt' for arm64."
-    else
-        echo "deb http://deb.debian.org/debian bookworm-backports main" | tee /etc/apt/sources.list.d/bookworm-backbacks.list
-        apt-get -qq update
-        apt-get -qq install --no-install-recommends --no-install-suggests -y mesa-teflon-delegate/bookworm-backports
-    fi
-fi
-
-# ffmpeg -> amd64
-if [[ "${TARGETARCH}" == "amd64" ]]; then
-    mkdir -p /usr/lib/ffmpeg/5.0
-    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linux64-gpl-5.1.tar.xz"
-    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/5.0 --strip-components 1 amd64/bin/ffmpeg amd64/bin/ffprobe
-    rm -rf ffmpeg.tar.xz
-    mkdir -p /usr/lib/ffmpeg/7.0
-    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2024-09-19-12-51/ffmpeg-n7.0.2-18-g3e6cec1286-linux64-gpl-7.0.tar.xz"
-    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/7.0 --strip-components 1 amd64/bin/ffmpeg amd64/bin/ffprobe
-    rm -rf ffmpeg.tar.xz
-fi
-
-# ffmpeg -> arm64
-if [[ "${TARGETARCH}" == "arm64" ]]; then
-    mkdir -p /usr/lib/ffmpeg/5.0
-    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linuxarm64-gpl-5.1.tar.xz"
-    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/5.0 --strip-components 1 arm64/bin/ffmpeg arm64/bin/ffprobe
-    rm -f ffmpeg.tar.xz
-    mkdir -p /usr/lib/ffmpeg/7.0
-    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2024-09-19-12-51/ffmpeg-n7.0.2-18-g3e6cec1286-linuxarm64-gpl-7.0.tar.xz"
-    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/7.0 --strip-components 1 arm64/bin/ffmpeg arm64/bin/ffprobe
-    rm -f ffmpeg.tar.xz
-fi
-
-# arch specific packages
-if [[ "${TARGETARCH}" == "amd64" ]]; then
-  # Install non-free version of i965 driver
-  sed -i -E "/^Components: main$/s/main/main contrib non-free non-free-firmware/" "/etc/apt/sources.list.d/debian.sources" \
-      && apt-get -qq update \
-      && apt-get install --no-install-recommends --no-install-suggests -y i965-va-driver-shaders \
-      && sed -i -E "/^Components: main contrib non-free non-free-firmware$/s/main contrib non-free non-free-firmware/main/" "/etc/apt/sources.list.d/debian.sources" \
-      && apt-get update
-
-    # install amd / intel-i965 driver packages
-    apt-get -qq install --no-install-recommends --no-install-suggests -y \
-        intel-gpu-tools onevpl-tools \
-        libva-drm2 \
-        mesa-va-drivers radeontop
-
-    # intel packages use zst compression so we need to update dpkg
-    apt-get install -y dpkg
-
-    # use intel apt intel packages
-    wget -qO - https://repositories.intel.com/gpu/intel-graphics.key | gpg --yes --dearmor --output /usr/share/keyrings/intel-graphics.gpg
-    echo "deb [arch=amd64 signed-by=/usr/share/keyrings/intel-graphics.gpg] https://repositories.intel.com/gpu/ubuntu jammy client" | tee /etc/apt/sources.list.d/intel-gpu-jammy.list
-    apt-get -qq update
-    apt-get -qq install --no-install-recommends --no-install-suggests -y \
-        intel-media-va-driver-non-free libmfx1 libmfxgen1 libvpl2
-
-    apt-get -qq install -y ocl-icd-libopencl1
-
-    # install libtbb12 for NPU support
-    apt-get -qq install -y libtbb12
-
-    rm -f /usr/share/keyrings/intel-graphics.gpg
-    rm -f /etc/apt/sources.list.d/intel-gpu-jammy.list
-
-    # install legacy and standard intel icd and level-zero-gpu
-    # see https://github.com/intel/compute-runtime/blob/master/LEGACY_PLATFORMS.md for more info
-    # needed core package
-    wget https://github.com/intel/compute-runtime/releases/download/24.52.32224.5/libigdgmm12_22.5.5_amd64.deb
-    dpkg -i libigdgmm12_22.5.5_amd64.deb
-    rm libigdgmm12_22.5.5_amd64.deb
-
-    # legacy packages
-    wget https://github.com/intel/compute-runtime/releases/download/24.35.30872.36/intel-opencl-icd-legacy1_24.35.30872.36_amd64.deb
-    wget https://github.com/intel/compute-runtime/releases/download/24.35.30872.36/intel-level-zero-gpu-legacy1_1.5.30872.36_amd64.deb
-    wget https://github.com/intel/intel-graphics-compiler/releases/download/igc-1.0.17537.24/intel-igc-opencl_1.0.17537.24_amd64.deb
-    wget https://github.com/intel/intel-graphics-compiler/releases/download/igc-1.0.17537.24/intel-igc-core_1.0.17537.24_amd64.deb
-    # standard packages
-    wget https://github.com/intel/compute-runtime/releases/download/24.52.32224.5/intel-opencl-icd_24.52.32224.5_amd64.deb
-    wget https://github.com/intel/compute-runtime/releases/download/24.52.32224.5/intel-level-zero-gpu_1.6.32224.5_amd64.deb
-    wget https://github.com/intel/intel-graphics-compiler/releases/download/v2.5.6/intel-igc-opencl-2_2.5.6+18417_amd64.deb
-    wget https://github.com/intel/intel-graphics-compiler/releases/download/v2.5.6/intel-igc-core-2_2.5.6+18417_amd64.deb
-    # npu packages
-    wget https://github.com/oneapi-src/level-zero/releases/download/v1.21.9/level-zero_1.21.9+u22.04_amd64.deb
-    wget https://github.com/intel/linux-npu-driver/releases/download/v1.17.0/intel-driver-compiler-npu_1.17.0.20250508-14912879441_ubuntu22.04_amd64.deb
-    wget https://github.com/intel/linux-npu-driver/releases/download/v1.17.0/intel-fw-npu_1.17.0.20250508-14912879441_ubuntu22.04_amd64.deb
-    wget https://github.com/intel/linux-npu-driver/releases/download/v1.17.0/intel-level-zero-npu_1.17.0.20250508-14912879441_ubuntu22.04_amd64.deb
-
-    dpkg -i *.deb
-    rm *.deb
-fi
-
-if [[ "${TARGETARCH}" == "arm64" ]]; then
-    apt-get -qq install --no-install-recommends --no-install-suggests -y \
-        libva-drm2 mesa-va-drivers radeontop
-fi
-
-# install vulkan
-apt-get -qq install --no-install-recommends --no-install-suggests -y \
-    libvulkan1 mesa-vulkan-drivers
-
-apt-get purge gnupg apt-transport-https xz-utils -y
-apt-get clean autoclean -y
-apt-get autoremove --purge -y
-rm -rf /var/lib/apt/lists/*
-
-# Install yq, for frigate-prepare and go2rtc echo source
-curl -fsSL \
-    "https://github.com/mikefarah/yq/releases/download/v4.33.3/yq_linux_$(dpkg --print-architecture)" \
-    --output /usr/local/bin/yq
-chmod +x /usr/local/bin/yq

docker/main/install_hailort.sh

@@ -1,14 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-hailo_version="4.21.0"
-
-if [[ "${TARGETARCH}" == "amd64" ]]; then
-    arch="x86_64"
-elif [[ "${TARGETARCH}" == "arm64" ]]; then
-    arch="aarch64"
-fi
-
-wget -qO- "https://github.com/frigate-nvr/hailort/releases/download/v${hailo_version}/hailort-debian12-${TARGETARCH}.tar.gz" | tar -C / -xzf -
-wget -P /wheels/ "https://github.com/frigate-nvr/hailort/releases/download/v${hailo_version}/hailort-${hailo_version}-cp311-cp311-linux_${arch}.whl"

docker/main/install_memryx.sh

@@ -1,31 +0,0 @@
-#!/bin/bash
-set -e
-
-# Download the MxAccl for Frigate github release
-wget https://github.com/memryx/mx_accl_frigate/archive/refs/heads/main.zip -O /tmp/mxaccl.zip
-unzip /tmp/mxaccl.zip -d /tmp
-mv /tmp/mx_accl_frigate-main /opt/mx_accl_frigate
-rm /tmp/mxaccl.zip
-
-# Install Python dependencies
-pip3 install -r /opt/mx_accl_frigate/freeze
-
-# Link the Python package dynamically
-SITE_PACKAGES=$(python3 -c "import site; print(site.getsitepackages()[0])")
-ln -s /opt/mx_accl_frigate/memryx "$SITE_PACKAGES/memryx"
-
-# Copy architecture-specific shared libraries
-ARCH=$(uname -m)
-if [[ "$ARCH" == "x86_64" ]]; then
-    cp /opt/mx_accl_frigate/memryx/x86/libmemx.so* /usr/lib/x86_64-linux-gnu/
-    cp /opt/mx_accl_frigate/memryx/x86/libmx_accl.so* /usr/lib/x86_64-linux-gnu/
-elif [[ "$ARCH" == "aarch64" ]]; then
-    cp /opt/mx_accl_frigate/memryx/arm/libmemx.so* /usr/lib/aarch64-linux-gnu/
-    cp /opt/mx_accl_frigate/memryx/arm/libmx_accl.so* /usr/lib/aarch64-linux-gnu/
-else
-    echo "Unsupported architecture: $ARCH"
-    exit 1
-fi
-
-# Refresh linker cache
-ldconfig

docker/main/install_s6_overlay.sh

@@ -1,19 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-s6_version="3.2.1.0"
-
-if [[ "${TARGETARCH}" == "amd64" ]]; then
-    s6_arch="x86_64"
-elif [[ "${TARGETARCH}" == "arm64" ]]; then
-    s6_arch="aarch64"
-fi
-
-mkdir -p /rootfs/
-
-wget -qO- "https://github.com/just-containers/s6-overlay/releases/download/v${s6_version}/s6-overlay-noarch.tar.xz" |
-    tar -C /rootfs/ -Jxpf -
-
-wget -qO- "https://github.com/just-containers/s6-overlay/releases/download/v${s6_version}/s6-overlay-${s6_arch}.tar.xz" |
-    tar -C /rootfs/ -Jxpf -

docker/main/install_tempio.sh

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-tempio_version="2021.09.0"
-
-if [[ "${TARGETARCH}" == "amd64" ]]; then
-    arch="amd64"
-elif [[ "${TARGETARCH}" == "arm64" ]]; then
-    arch="aarch64"
-fi
-
-mkdir -p /rootfs/usr/local/tempio/bin
-
-wget -q -O /rootfs/usr/local/tempio/bin/tempio "https://github.com/home-assistant/tempio/releases/download/${tempio_version}/tempio_${arch}"
-chmod 755 /rootfs/usr/local/tempio/bin/tempio

docker/main/requirements-dev.txt

@@ -1,4 +0,0 @@
-ruff
-
-# types
-types-peewee == 3.17.*

docker/main/requirements-ov.txt

@@ -1,3 +0,0 @@
-numpy
-tensorflow
-openvino-dev>=2024.0.0

docker/main/requirements-wheels.txt

@@ -1,83 +0,0 @@
-aiofiles == 24.1.*
-click == 8.1.*
-# FastAPI
-aiohttp == 3.12.*
-starlette == 0.47.*
-starlette-context == 0.4.*
-fastapi[standard-no-fastapi-cloud-cli] == 0.116.*
-uvicorn == 0.35.*
-slowapi == 0.1.*
-joserfc == 1.2.*
-cryptography == 44.0.*
-pathvalidate == 3.3.*
-markupsafe == 3.0.*
-python-multipart == 0.0.20
-# Classification Model Training
-tensorflow == 2.19.* ; platform_machine == 'aarch64'
-tensorflow-cpu == 2.19.* ; platform_machine == 'x86_64'
-# General
-mypy == 1.6.1
-onvif-zeep-async == 4.0.*
-paho-mqtt == 2.1.*
-pandas == 2.2.*
-peewee == 3.17.*
-peewee_migrate == 1.13.*
-psutil == 7.1.*
-pydantic == 2.10.*
-git+https://github.com/fbcotter/py3nvml#egg=py3nvml
-pytz == 2025.*
-pyzmq == 26.2.*
-ruamel.yaml == 0.18.*
-tzlocal == 5.2
-requests == 2.32.*
-types-requests == 2.32.*
-norfair == 2.3.*
-setproctitle == 1.3.*
-ws4py == 0.5.*
-unidecode == 1.3.*
-titlecase == 2.4.*
-# Image Manipulation
-numpy == 1.26.*
-opencv-python-headless == 4.11.0.*
-opencv-contrib-python == 4.11.0.*
-scipy == 1.16.*
-# OpenVino & ONNX
-openvino == 2025.3.*
-onnxruntime == 1.22.*
-# Embeddings
-transformers == 4.45.*
-# Generative AI
-google-generativeai == 0.8.*
-ollama == 0.5.*
-openai == 1.65.*
-# push notifications
-py-vapid == 1.9.*
-pywebpush == 2.0.*
-# alpr
-pyclipper == 1.3.*
-shapely == 2.0.*
-Levenshtein==0.26.*
-# HailoRT Wheels
-appdirs==1.4.*
-argcomplete==2.0.*
-contextlib2==0.6.*
-distlib==0.3.*
-filelock==3.8.*
-future==0.18.*
-importlib-metadata==5.1.*
-importlib-resources==5.1.*
-netaddr==0.8.*
-netifaces==0.10.*
-verboselogs==1.7.*
-virtualenv==20.17.*
-prometheus-client == 0.21.*
-# TFLite
-tflite_runtime @ https://github.com/frigate-nvr/TFlite-builds/releases/download/v2.17.1/tflite_runtime-2.17.1-cp311-cp311-linux_x86_64.whl; platform_machine == 'x86_64'
-tflite_runtime @ https://github.com/feranick/TFlite-builds/releases/download/v2.17.1/tflite_runtime-2.17.1-cp311-cp311-linux_aarch64.whl; platform_machine == 'aarch64'
-# audio transcription
-sherpa-onnx==1.12.*
-faster-whisper==1.1.*
-librosa==0.11.*
-soundfile==0.13.*
-# DeGirum detector
-degirum == 0.16.*

docker/main/requirements.txt

@@ -1,2 +0,0 @@
-scikit-build == 0.18.*
-nvidia-pyindex

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/consumer-for

@@ -1 +0,0 @@
-certsync

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/pipeline-name

@@ -1 +0,0 @@
-certsync-pipeline

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/run

@@ -1,4 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-
-exec logutil-service /dev/shm/logs/certsync

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync-log/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/finish

@@ -1,30 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Take down the S6 supervision tree when the service fails
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-declare exit_code_container
-exit_code_container=$(cat /run/s6-linux-init-container-results/exitcode)
-readonly exit_code_container
-readonly exit_code_service="${1}"
-readonly exit_code_signal="${2}"
-readonly service="CERTSYNC"
-
-echo "[INFO] Service ${service} exited with code ${exit_code_service} (by signal ${exit_code_signal})"
-
-if [[ "${exit_code_service}" -eq 256 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo $((128 + exit_code_signal)) >/run/s6-linux-init-container-results/exitcode
-  fi
-  if [[ "${exit_code_signal}" -eq 15 ]]; then
-    exec /run/s6/basedir/bin/halt
-  fi
-elif [[ "${exit_code_service}" -ne 0 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo "${exit_code_service}" >/run/s6-linux-init-container-results/exitcode
-  fi
-  exec /run/s6/basedir/bin/halt
-fi

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/producer-for

@@ -1 +0,0 @@
-certsync-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/run

@@ -1,58 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Start the CERTSYNC service
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-echo "[INFO] Starting certsync..."
-
-lefile="/etc/letsencrypt/live/frigate/fullchain.pem"
-
-tls_enabled=`python3 /usr/local/nginx/get_listen_settings.py | jq -r .tls.enabled`
-
-while true
-do
-    if [[ "$tls_enabled" == 'false' ]]; then
-        sleep 9999
-        continue
-    fi
-
-    if [ ! -e $lefile ]
-    then
-        echo "[ERROR] TLS certificate does not exist: $lefile"
-    fi
-
-    leprint=`openssl x509 -in $lefile -fingerprint -noout 2>&1 || echo 'failed'`
-
-    case "$leprint" in
-        *Fingerprint*)
-            ;;
-        *)
-            echo "[ERROR] Missing fingerprint from $lefile"
-            ;;
-    esac
-
-    liveprint=`echo | openssl s_client -showcerts -connect 127.0.0.1:8971 2>&1 | openssl x509 -fingerprint 2>&1 | grep -i fingerprint  || echo 'failed'`
-
-    case "$liveprint" in
-        *Fingerprint*)
-            ;;
-        *)
-            echo "[ERROR] Missing fingerprint from current nginx TLS cert"
-            ;;
-    esac
-
-    if [[ "$leprint" != "failed" && "$liveprint" != "failed" && "$leprint" != "$liveprint" ]]
-    then
-        echo "[INFO] Reloading nginx to refresh TLS certificate"
-        echo "$lefile: $leprint"
-        /usr/local/nginx/sbin/nginx -s reload
-    fi
-
-    sleep 60
-
-done
-
-exit 0

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/timeout-kill

@@ -1 +0,0 @@
-30000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/certsync/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate-log/consumer-for

@@ -1 +0,0 @@
-frigate

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate-log/pipeline-name

@@ -1 +0,0 @@
-frigate-pipeline

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate-log/run

@@ -1,4 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-
-exec logutil-service /dev/shm/logs/frigate

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate-log/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/finish

@@ -1,28 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Take down the S6 supervision tree when the service exits
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-declare exit_code_container
-exit_code_container=$(cat /run/s6-linux-init-container-results/exitcode)
-readonly exit_code_container
-readonly exit_code_service="${1}"
-readonly exit_code_signal="${2}"
-readonly service="Frigate"
-
-echo "[INFO] Service ${service} exited with code ${exit_code_service} (by signal ${exit_code_signal})"
-
-if [[ "${exit_code_service}" -eq 256 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo $((128 + exit_code_signal)) >/run/s6-linux-init-container-results/exitcode
-  fi
-elif [[ "${exit_code_service}" -ne 0 ]]; then
-  if [[ "${exit_code_container}" -eq 0 ]]; then
-    echo "${exit_code_service}" >/run/s6-linux-init-container-results/exitcode
-  fi
-fi
-
-exec /run/s6/basedir/bin/halt

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/producer-for

@@ -1 +0,0 @@
-frigate-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/run

@@ -1,33 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Start the Frigate service
-
-set -o errexit -o nounset -o pipefail
-
-# opt out of openvino telemetry
-if [ -e /usr/local/bin/opt_in_out ]; then
-  /usr/local/bin/opt_in_out --opt_out > /dev/null 2>&1
-fi
-
-# Logs should be sent to stdout so that s6 can collect them
-
-# Tell S6-Overlay not to restart this service
-s6-svc -O .
-
-function set_libva_version() {
-    local ffmpeg_path
-    ffmpeg_path=$(python3 /usr/local/ffmpeg/get_ffmpeg_path.py)
-    LIBAVFORMAT_VERSION_MAJOR=$("$ffmpeg_path" -version | grep -Po "libavformat\W+\K\d+")
-    export LIBAVFORMAT_VERSION_MAJOR
-}
-
-echo "[INFO] Preparing Frigate..."
-set_libva_version
-
-echo "[INFO] Starting Frigate..."
-
-cd /opt/frigate || echo "[ERROR] Failed to change working directory to /opt/frigate"
-
-# Replace the bash process with the Frigate process, redirecting stderr to stdout
-exec 2>&1
-exec python3 -u -m frigate

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/timeout-kill

@@ -1 +0,0 @@
-120000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/finish

@@ -1,12 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-readonly exit_code_service="${1}"
-readonly exit_code_signal="${2}"
-readonly service="go2rtc-healthcheck"
-
-echo "[INFO] The ${service} service exited with code ${exit_code_service} (by signal ${exit_code_signal})"

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/producer-for

@@ -1 +0,0 @@
-go2rtc-log

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/run

@@ -1,22 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Start the go2rtc-healthcheck service
-
-set -o errexit -o nounset -o pipefail
-
-# Logs should be sent to stdout so that s6 can collect them
-
-# Give some additional time for go2rtc to start before start pinging
-sleep 10s
-echo "[INFO] Starting go2rtc healthcheck service..."
-
-while sleep 30s; do
-    # Check if the service is running
-    if ! curl --connect-timeout 10 --fail --silent --show-error --output /dev/null http://127.0.0.1:1984/api/streams 2>&1; then
-        echo "[ERROR] The go2rtc service is not responding to ping, restarting..."
-        # We can also use -r instead of -t to send kill signal rather than term
-        s6-svc -t /var/run/service/go2rtc 2>&1
-        # Give some additional time to go2rtc to restart before start pinging again
-        sleep 10s
-    fi
-done

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/timeout-kill

@@ -1 +0,0 @@
-5000

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-healthcheck/type

@@ -1 +0,0 @@
-longrun

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-log/consumer-for

@@ -1,2 +0,0 @@
-go2rtc
-go2rtc-healthcheck

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-log/pipeline-name

@@ -1 +0,0 @@
-go2rtc-pipeline

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-log/run

@@ -1,4 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-
-exec logutil-service /dev/shm/logs/go2rtc

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc-log/type

@@ -1 +0,0 @@
-longrun