fix：更新依赖版本，避免查询超额报错

README.md

@@ -252,6 +252,7 @@ Usage: goecs [options]
 2. 解压后，右键以管理员模式运行。
 
 PS：如果是虚拟机环境，不以管理员模式运行也行，因为虚拟机无原生的测试工具，将自动启用替代方法测试。
+PPS: 暂时不要下载带GUI标签的exe文件，未完整适配，CI版本的压缩包是没问题的。
 
 ---
 

README_EN.md

@@ -251,6 +251,7 @@ Usage: goecs [options]
 2. After unzipping, right-click and run as administrator.
 
 PS: If it's a VM environment, it's OK not to run it in administrator mode, because VMs have no native testing tools and will automatically enable alternative methods for testing.
+PPS: Please refrain from downloading executable files labelled with a GUI for the time being, as they have not been fully adapted. The compressed packages for the CI version are unaffected.
 
 ---
 

README_NEW_USER.md

@@ -412,7 +412,7 @@ Abuser 或 Abuse 的滥用得分会直接影响机器的正常使用（中国境
 
 有时候路由信息完全藏起来了，只知道实际使用的延迟低，实际可能也是优质线路只是查不到信息，这就没办法直接识别了。
 
-所有测不出来失败的地址以及延迟大于等于999ms的，延迟都设为了999，延迟超过这个也证明目标延迟过大影响使用，此时认为目标不可用就行。
+所有测不出来失败的地址以及延迟大于等于9999ms的，延迟都设为了9999，延迟超过这个也证明目标延迟过大影响使用，此时认为目标不可用就行。
 
 ### **PING值测试**
 
@@ -760,7 +760,7 @@ Dependency project: [https://github.com/oneclickvirt/pingtest](https://github.co
 
 Measure the latency from the current IP address to each TG data center and major websites.
 
-All addresses that cannot be tested for failure, as well as those with latency greater than or equal to 999ms, have their latency set to 999. Latency exceeding this threshold also indicates excessive target latency that impairs usability. At this point, the target should be considered unavailable.
+All addresses that cannot be tested for failure, as well as those with latency greater than or equal to 9999ms, have their latency set to 9999. Latency exceeding this threshold also indicates excessive target latency that impairs usability. At this point, the target should be considered unavailable.
 
 ### Nearby Speed Testing
 
@@ -1094,7 +1094,7 @@ IPタイプの分類について詳しく説明する必要がある
 
 現在のIPアドレスからTGの各データセンターおよび主要ウェブサイトまでの遅延を測定します。
 
-検出不能な失敗アドレスおよび遅延が999ms以上のものは、遅延を999に設定する。この値を超える遅延は対象の遅延が過大で利用に影響することを示すため、この時点で対象は利用不可と判断すればよい。
+検出不能な失敗アドレスおよび遅延が9999ms以上のものは、遅延を9999に設定する。この値を超える遅延は対象の遅延が過大で利用に影響することを示すため、この時点で対象は利用不可と判断すればよい。
 
 ### 近隣スピードテスト
 

go.mod

@@ -13,10 +13,10 @@ require (
 	github.com/oneclickvirt/disktest v0.0.10-20250924030424
 	github.com/oneclickvirt/gostun v0.0.5-20250727155022
 	github.com/oneclickvirt/memorytest v0.0.10-20250924154648
-	github.com/oneclickvirt/nt3 v0.0.10-20251103023436
-	github.com/oneclickvirt/pingtest v0.0.9-20251102150730
+	github.com/oneclickvirt/nt3 v0.0.10-20251104114914
+	github.com/oneclickvirt/pingtest v0.0.9-20251104112920
 	github.com/oneclickvirt/portchecker v0.0.3-20250728015900
-	github.com/oneclickvirt/security v0.0.7-20251030094114
+	github.com/oneclickvirt/security v0.0.7-20251106060213
 	github.com/oneclickvirt/speedtest v0.0.11-20251102151740
 )
 

go.sum

@@ -118,14 +118,14 @@ github.com/oneclickvirt/mbw v0.0.1-20250808061222 h1:WGXOe6QvHiDRhPVMI0VcctjzW08
 github.com/oneclickvirt/mbw v0.0.1-20250808061222/go.mod h1:0Vq6NRpyLmGUdfHfL3uDcFsuZhi7KlG+OCs5ky2757Y=
 github.com/oneclickvirt/memorytest v0.0.10-20250924154648 h1:trk6oZ7xs1eVtr+6oIv5IX8LDVtEMG+E6GVzQ810BtU=
 github.com/oneclickvirt/memorytest v0.0.10-20250924154648/go.mod h1:4kiHsEWkW9r3/1ZcV5xIweU0smiKP0IRfQj74AUIiVI=
-github.com/oneclickvirt/nt3 v0.0.10-20251103023436 h1:vXqiU/HE0EXGf17LHyIQx8xYJz3+MOCHtlbfKyvt3cQ=
-github.com/oneclickvirt/nt3 v0.0.10-20251103023436/go.mod h1:yo1ufkduFt9QjqG7nqSUf1D3YlQOmFpdlTYniJfclQI=
-github.com/oneclickvirt/pingtest v0.0.9-20251102150730 h1:pipqyJUaUI0K5waFvDNNfqbIikMp+9Kg8Dw/kLEUYF8=
-github.com/oneclickvirt/pingtest v0.0.9-20251102150730/go.mod h1:gxwsxxwitNQiGq2OI0ZogYoOLwc8DtuOdSRe6/EvRqs=
+github.com/oneclickvirt/nt3 v0.0.10-20251104114914 h1:P4nbdKcIA7+FH4feLLxfiJVf1f3ENi/oo37EsdyX9oI=
+github.com/oneclickvirt/nt3 v0.0.10-20251104114914/go.mod h1:yo1ufkduFt9QjqG7nqSUf1D3YlQOmFpdlTYniJfclQI=
+github.com/oneclickvirt/pingtest v0.0.9-20251104112920 h1:j3Fjhy0YHT/VF7iuAVVELaRXkquvRd64tWWfFLJs01o=
+github.com/oneclickvirt/pingtest v0.0.9-20251104112920/go.mod h1:gxwsxxwitNQiGq2OI0ZogYoOLwc8DtuOdSRe6/EvRqs=
 github.com/oneclickvirt/portchecker v0.0.3-20250728015900 h1:AomzdppSOFB70AJESQhlp0IPbsHTTJGimAWDk2TzCWM=
 github.com/oneclickvirt/portchecker v0.0.3-20250728015900/go.mod h1:9sjMDPCd4Z40wkYB0S9gQPGH8YPtnNE1ZJthVIuHUzA=
-github.com/oneclickvirt/security v0.0.7-20251030094114 h1:Ax8J1TYqprXyiWNAIJJ3xhoyGhvBlKw4m9j6va5Q2nM=
-github.com/oneclickvirt/security v0.0.7-20251030094114/go.mod h1:YfDilPFW22szjdUNgv4VOuSwHnZzsFsdPOfRYiMoc3I=
+github.com/oneclickvirt/security v0.0.7-20251106060213 h1:vBCEFvuWpScXZ9O7Y7cW1zp1V2AfjzMN+YSBcYfpjYs=
+github.com/oneclickvirt/security v0.0.7-20251106060213/go.mod h1:YfDilPFW22szjdUNgv4VOuSwHnZzsFsdPOfRYiMoc3I=
 github.com/oneclickvirt/speedtest v0.0.11-20251102151740 h1:1NUrNt5ay6/xVNC5x62UrQjPqK8jgbKtyjBml/3boZg=
 github.com/oneclickvirt/speedtest v0.0.11-20251102151740/go.mod h1:fy0II2Wo7kDWVBKTwcHdodZwyfmJo0g8N9V02EwQDZE=
 github.com/oneclickvirt/stream v0.0.2-20250924154001 h1:GuJWdiPkoK84+y/+oHKr2Ghl3c/MzS9Z5m1nM+lMmy4=

goecs.go

@@ -28,7 +28,7 @@ import (
 )
 
 var (
-	ecsVersion   = "v0.1.98"               // 融合怪版本号
+	ecsVersion   = "v0.1.100"               // 融合怪版本号
 	configs      = params.NewConfig(ecsVersion) // 全局配置实例
 	userSetFlags = make(map[string]bool)        // 用于跟踪哪些参数是用户显式设置的
 )

goecs.sh

@@ -152,7 +152,7 @@ goecs_check() {
     os=$(uname -s 2>/dev/null || echo "Unknown")
     arch=$(uname -m 2>/dev/null || echo "Unknown")
     check_china
-    ECS_VERSION="0.1.97"
+    ECS_VERSION="0.1.99"
     for api in \
         "https://api.github.com/repos/oneclickvirt/ecs/releases/latest" \
         "https://githubapi.spiritlhl.workers.dev/repos/oneclickvirt/ecs/releases/latest" \
@@ -164,8 +164,8 @@ goecs_check() {
         sleep 1
     done
     if [ -z "$ECS_VERSION" ]; then
-        _yellow "Unable to get version info, using default version 0.1.97"
-        ECS_VERSION="0.1.97"
+        _yellow "Unable to get version info, using default version 0.1.99"
+        ECS_VERSION="0.1.99"
     fi
     version_output=""
     for cmd_path in "goecs" "./goecs" "/usr/bin/goecs" "/usr/local/bin/goecs"; do

internal/tests/nexttrace.go

@@ -27,7 +27,7 @@ func NextTrace3Check(language, nt3Location, nt3CheckType string) {
 					fmt.Println(res)
 				}
 			}
-			return
+			continue
 		}
 		for _, res := range result.Output {
 			res = strings.TrimSpace(res)