tcp报文头结构可视化解析;优化IP udp报文的可视化解析

cmd/netstack/main.go

@@ -124,7 +124,7 @@ func main() {
 
 	//go func() { // echo server
 	//	// 监听udp localPort端口
-	//	conn := udpListen(s, proto, localPort)
+	//	conn := udpListen(s, proto, addr, localPort)
 
 	//	for {
 	//		buf := make([]byte, 1024)
@@ -141,23 +141,48 @@ func main() {
 	//}()
 
 	go func() { // echo server
-		conn := tcpListen(s, proto, localPort)
+		listener := tcpListen(s, proto, addr, localPort)
+		for {
+			conn, err := listener.Accept()
+			if err != nil {
+				log.Println(err)
+				continue
+			}
 			conn.Read(nil)
+		}
 	}()
 
 	c := make(chan os.Signal)
 	signal.Notify(c, os.Interrupt, os.Kill, syscall.SIGUSR1, syscall.SIGUSR2)
 	<-c
-
-	//conn, _ := net.Listen("tcp", "0.0.0.0:9999")
-	//rcv := &RCV{
-	//	Stack: s,
-	//	addr:  tcpip.FullAddress{},
-	//}
-	//TCPServer(conn, rcv)
 }
 
-func tcpListen(s *stack.Stack, proto tcpip.NetworkProtocolNumber, localPort int) tcpip.Endpoint {
+type TcpConn struct {
+	raddr    tcpip.FullAddress
+	ep       tcpip.Endpoint
+	wq       *waiter.Queue
+	we       *waiter.Entry
+	notifyCh chan struct{}
+}
+
+// Accept 封装tcp的accept操作
+func (conn *TcpConn) Accept() (tcpip.Endpoint, error) {
+	conn.wq.EventRegister(conn.we, waiter.EventIn)
+	defer conn.wq.EventUnregister(conn.we)
+	for {
+		ep, _, err := conn.ep.Accept()
+		if err != nil {
+			if err == tcpip.ErrWouldBlock {
+				<-conn.notifyCh
+				continue
+			}
+			return nil, fmt.Errorf("%s", err.String())
+		}
+		return ep, nil
+	}
+}
+
+func tcpListen(s *stack.Stack, proto tcpip.NetworkProtocolNumber, addr tcpip.Address, localPort int) *TcpConn {
 	var wq waiter.Queue
 	// 新建一个tcp端
 	ep, err := s.NewEndpoint(tcp.ProtocolNumber, proto, &wq)
@@ -167,7 +192,7 @@ func tcpListen(s *stack.Stack, proto tcpip.NetworkProtocolNumber, localPort int)
 
 	// 绑定IP和端口，这里的IP地址为空，表示绑定任何IP
 	// 此时就会调用端口管理器
-	if err := ep.Bind(tcpip.FullAddress{NIC: 0, Addr: "", Port: uint16(localPort)}, nil); err != nil {
+	if err := ep.Bind(tcpip.FullAddress{NIC: 1, Addr: addr, Port: uint16(localPort)}, nil); err != nil {
 		log.Fatal("Bind failed: ", err)
 	}
 
@@ -176,7 +201,12 @@ func tcpListen(s *stack.Stack, proto tcpip.NetworkProtocolNumber, localPort int)
 		log.Fatal("Listen failed: ", err)
 	}
 
-	return ep
+	waitEntry, notifyCh := waiter.NewChannelEntry(nil)
+	return &TcpConn{
+		ep:       ep,
+		wq:       &wq,
+		we:       &waitEntry,
+		notifyCh: notifyCh}
 }
 
 type UdpConn struct {
@@ -226,7 +256,7 @@ func (conn *UdpConn) Write(snd []byte) error {
 	}
 }
 
-func udpListen(s *stack.Stack, proto tcpip.NetworkProtocolNumber, localPort int) *UdpConn {
+func udpListen(s *stack.Stack, proto tcpip.NetworkProtocolNumber, addr tcpip.Address, localPort int) *UdpConn {
 	var wq waiter.Queue
 	// 新建一个udp端
 	ep, err := s.NewEndpoint(udp.ProtocolNumber, proto, &wq)
@@ -237,7 +267,7 @@ func udpListen(s *stack.Stack, proto tcpip.NetworkProtocolNumber, localPort int)
 	// 绑定IP和端口，这里的IP地址为空，表示绑定任何IP
 	// 0.0.0.0:9999 这台机器上的所有ip的9999段端口数据都会使用该传输层实现
 	// 此时就会调用端口管理器
-	if err := ep.Bind(tcpip.FullAddress{NIC: 0, Addr: "", Port: uint16(localPort)}, nil); err != nil {
+	if err := ep.Bind(tcpip.FullAddress{NIC: 0, Addr: addr, Port: uint16(localPort)}, nil); err != nil {
 		log.Fatal("Bind failed: ", err)
 	}
 

tcpip/header/ipv4.go

@@ -180,6 +180,16 @@ func (b IPv4) Payload() []byte {
 	return b[b.HeaderLength():][:b.PayloadLength()]
 }
 
+// IPViewSize IP报文内容概览 长度
+const IPViewSize = 128
+
+func (b IPv4) viewPayload() []byte {
+	if b.PayloadLength() < IPViewSize {
+		return b[b.HeaderLength():][:b.PayloadLength()]
+	}
+	return b[b.HeaderLength():][:IPViewSize]
+}
+
 // PayloadLength returns the length of the payload portion of the ipv4 packet.
 func (b IPv4) PayloadLength() uint16 {
 	return b.TotalLength() - uint16(b.HeaderLength())
@@ -294,20 +304,10 @@ func atoi[T int | int8 | int16 | int32 | int64 | uint | uint8 | uint16 | uint32]
 }
 
 func (b IPv4) String() string {
-	for i := range b.Payload() {
-		if i != int(b.PayloadLength()-1) && b.Payload()[i]^b.Payload()[i+1] != 0 {
 	return fmt.Sprintf(ipv4Fmt, atoi(IPVersion(b)), atoi(b.HeaderLength()), atoi(0), atoi(b.TotalLength()),
 		atoi(b.ID()), atoi(b.Flags()>>2), atoi((b.Flags()&2)>>1), atoi(b.Flags()&1), atoi(b.FragmentOffset()),
 		atoi(b.TTL()), atoi(b.Protocol()), atoi(b.Checksum()),
 		b.SourceAddress().String(),
 		b.DestinationAddress().String(),
-				b.Payload())
-		}
-	}
-	return fmt.Sprintf(ipv4Fmt, atoi(IPVersion(b)), atoi(b.HeaderLength()), atoi(0), atoi(b.TotalLength()),
-		atoi(b.ID()), atoi(b.Flags()>>2), atoi((b.Flags()&2)>>1), atoi(b.Flags()&1), atoi(b.FragmentOffset()),
-		atoi(b.TTL()), atoi(b.Protocol()), atoi(b.Checksum()),
-		b.SourceAddress().String(),
-		b.DestinationAddress().String(),
-		fmt.Sprintf("%v x %d", b.Payload()[0], b.PayloadLength()))
+		b.viewPayload())
 }

tcpip/header/tcp.go

@@ -2,6 +2,7 @@ package header
 
 import (
 	"encoding/binary"
+	"fmt"
 	"netstack/tcpip"
 )
 
@@ -91,3 +92,114 @@ func (b TCP) SourcePort() uint16 {
 func (b TCP) DestinationPort() uint16 {
 	return binary.BigEndian.Uint16(b[dstPort:])
 }
+
+// SequenceNumber returns the "sequence number" field of the tcp header.
+func (b TCP) SequenceNumber() uint32 {
+	return binary.BigEndian.Uint32(b[seqNum:])
+}
+
+// AckNumber returns the "ack number" field of the tcp header.
+func (b TCP) AckNumber() uint32 {
+	return binary.BigEndian.Uint32(b[ackNum:])
+}
+
+// DataOffset returns the "data offset" field of the tcp header.
+func (b TCP) DataOffset() uint8 {
+	return (b[dataOffset] >> 4) * 4 // 以32bits为单位 最小为5 20bytes
+}
+
+// Payload returns the data in the tcp packet.
+func (b TCP) Payload() []byte {
+	return b[b.DataOffset():]
+}
+
+// TCPViewSize TCP报文概览长度
+const TCPViewSize = IPViewSize - TCPMinimumSize
+
+func (b TCP) viewPayload() []byte {
+	if len(b.Payload())-int(b.DataOffset()) < TCPViewSize {
+		return b.Payload()
+	}
+	return b[b.DataOffset():][:TCPViewSize]
+}
+
+// Flags returns the flags field of the tcp header.
+func (b TCP) Flags() uint8 {
+	return b[tcpFlags]
+}
+
+// WindowSize returns the "window size" field of the tcp header.
+func (b TCP) WindowSize() uint16 {
+	return binary.BigEndian.Uint16(b[winSize:])
+}
+
+// Checksum returns the "checksum" field of the tcp header.
+func (b TCP) Checksum() uint16 {
+	return binary.BigEndian.Uint16(b[tcpChecksum:])
+}
+
+// UrgentPtr returns the "urgentptr" field of the tcp header.
+func (b TCP) UrgentPtr() uint16 {
+	return binary.BigEndian.Uint16(b[urgentPtr:])
+}
+
+// SetSourcePort sets the "source port" field of the tcp header.
+func (b TCP) SetSourcePort(port uint16) {
+	binary.BigEndian.PutUint16(b[srcPort:], port)
+}
+
+// SetDestinationPort sets the "destination port" field of the tcp header.
+func (b TCP) SetDestinationPort(port uint16) {
+	binary.BigEndian.PutUint16(b[dstPort:], port)
+}
+
+// SetChecksum sets the checksum field of the tcp header.
+func (b TCP) SetChecksum(checksum uint16) {
+	binary.BigEndian.PutUint16(b[tcpChecksum:], checksum)
+}
+
+// Options returns a slice that holds the unparsed TCP options in the segment.
+func (b TCP) Options() []byte {
+	return b[TCPMinimumSize:b.DataOffset()]
+}
+
+/*
+ 0                   1                   2                   3
+ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+|          Source Port          |       Destination Port        |
++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+|                        Sequence Number                        |
++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+|                    Acknowledgment Number                      |
++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+|  Data |           |U|A|P|R|S|F|                               |
+| Offset| Reserved  |R|C|S|S|Y|I|            Window             |
+|       |           |G|K|H|T|N|N|                               |
++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+|           Checksum            |         Urgent Pointer        |
++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+|                    Options                    |    Padding    |
++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+|                             data                              |
++-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+*/
+
+var tcpFmt string = `
+|% 16s|% 16s|
+|% 32s |
+|% 32s |
+|% 4s|% 4s|%06b|% 16s|
+|% 16s|% 16s|
+|      Options      |   Padding   |
+%v
+`
+
+func (b TCP) String() string {
+	return fmt.Sprintf(tcpFmt, atoi(b.SourcePort()), atoi(b.DestinationPort()),
+		atoi(b.SequenceNumber()),
+		atoi(b.AckNumber()),
+		atoi(b.DataOffset()), "0", b.Flags(), atoi(b.WindowSize()),
+		atoi(b.Checksum()), atoi(b.UrgentPtr()),
+		b.viewPayload())
+}

tcpip/header/udp.go

@@ -77,6 +77,16 @@ func (b UDP) Payload() []byte {
 	return b[UDPMinimumSize:]
 }
 
+// UDPViewSize UDP报文内容概览 长度
+const UDPViewSize = IPViewSize - UDPMinimumSize
+
+func (b UDP) viewPayload() []byte {
+	if b.Length()-UDPMinimumSize < UDPViewSize {
+		return b[UDPMinimumSize:]
+	}
+	return b[UDPMinimumSize:][:UDPViewSize]
+}
+
 // Checksum returns the "checksum" field of the udp header.
 func (b UDP) Checksum() uint16 {
 	return binary.BigEndian.Uint16(b[udpChecksum:])
@@ -125,14 +135,7 @@ var udpFmt string = `
 `
 
 func (b UDP) String() string {
-	for i := range b.Payload() {
-		if i != int(b.Length()-8-1) && b.Payload()[i]^b.Payload()[i+1] != 0 {
 	return fmt.Sprintf(udpFmt, atoi(b.SourcePort()), atoi(b.DestinationPort()),
 		atoi(b.Length()), atoi(b.Checksum()),
-				b.Payload())
-		}
-	}
-	return fmt.Sprintf(udpFmt, atoi(b.SourcePort()), atoi(b.DestinationPort()),
-		atoi(b.Length()), atoi(b.Checksum()),
-		fmt.Sprintf("%v x %d", b.Payload()[0], b.Length()-8))
+		b.viewPayload())
 }

tcpip/network/ipv4/ipv4.go

@@ -121,7 +121,7 @@ func (e *endpoint) WritePacket(r *stack.Route, hdr buffer.Prependable, payload b
 // 收到ip包的处理
 func (e *endpoint) HandlePacket(r *stack.Route, vv buffer.VectorisedView) {
 	// 得到ip报文
-	h := header.IPv4(vv.ToView())
+	h := header.IPv4(vv.First())
 	// 检查报文是否有效
 	if !h.IsValid(vv.Size()) {
 		return

tcpip/seqnum/seqnum.go

@@ -0,0 +1,50 @@
+package seqnum
+
+// Value represents the value of a sequence number.
+type Value uint32
+
+// Size represents the size (length) of a sequence number window
+type Size uint32
+
+// LessThan v < w
+func (v Value) LessThan(w Value) bool {
+	return int32(v-w) < 0
+}
+
+// LessThanEq returns true if v==w or v is before i.e., v < w.
+func (v Value) LessThanEq(w Value) bool {
+	if v == w {
+		return true
+	}
+	return v.LessThan(w)
+}
+
+// InRange v ∈ [a, b)
+func (v Value) InRange(a, b Value) bool {
+	return a <= v && v < b
+}
+
+// InWindows check v in [first, first+size)
+func (v Value) InWindows(first Value, size Size) bool {
+	return v.InRange(first, first.Add(size))
+}
+
+// Add return v + s
+func (v Value) Add(s Size) Value {
+	return v + Value(s)
+}
+
+// Size return the size of [v, w)
+func (v Value) Size(w Value) Size {
+	return Size(w - v)
+}
+
+// UpdateForward update the value to v+s
+func (v *Value) UpdateForward(s Size) {
+	*v += Value(s)
+}
+
+// Overlap checks if the window [a,a+b) overlaps with the window [x, x+y).
+func Overlap(a Value, b Size, x Value, y Size) bool {
+	return a.LessThan(x.Add(y)) && x.LessThan(a.Add(b))
+}

tcpip/transport/tcp/accept.go

@@ -0,0 +1,11 @@
+package tcp
+
+import (
+	"netstack/tcpip"
+	"netstack/tcpip/seqnum"
+)
+
+// protocolListenLoop 是侦听TCP端点的主循环。它在自己的goroutine中运行，负责处理连接请求
+func (e *endpoint) protocolListenLoop(rcvWnd seqnum.Size) *tcpip.Error {
+	select {}
+}

tcpip/transport/tcp/connect.go

@@ -0,0 +1,14 @@
+package tcp
+
+import (
+	"log"
+	"netstack/tcpip"
+)
+
+// protocolMainLoop 是TCP协议的主循环。它在自己的goroutine中运行，负责握手、发送段和处理收到的段
+func (e *endpoint) protocolMainLoop(handshake bool) *tcpip.Error {
+	for {
+		log.Println("三次握手机制在这里实现")
+		select {}
+	}
+}

tcpip/transport/tcp/endpoint.go

@@ -4,6 +4,8 @@ import (
 	"log"
 	"netstack/tcpip"
 	"netstack/tcpip/buffer"
+	"netstack/tcpip/header"
+	"netstack/tcpip/seqnum"
 	"netstack/tcpip/stack"
 	"netstack/waiter"
 	"sync"
@@ -34,14 +36,34 @@ type endpoint struct {
 
 	// The following fields are protected by the mutex.
 	mu                sync.RWMutex
-	id                stack.TransportEndpointID
-	state             endpointState
-	isPortReserved    bool
-	isRegistered      bool
+	id                stack.TransportEndpointID // tcp端在网络协议栈的唯一ID
+	state             endpointState             // 目前tcp状态机的状态
+	isPortReserved    bool                      // 是否已经分配端口
+	isRegistered      bool                      // 是否已经注册在网络协议栈
 	boundNICID        tcpip.NICID
-	route             stack.Route
-	v6only            bool
+	route             stack.Route // tcp端在网络协议栈中的路由地址
+	v6only            bool        // 是否仅仅支持ipv6
 	isConnectNotified bool
+
+	// effectiveNetProtos contains the network protocols actually in use. In
+	// most cases it will only contain "netProto", but in cases like IPv6
+	// endpoints with v6only set to false, this could include multiple
+	// protocols (e.g., IPv6 and IPv4) or a single different protocol (e.g.,
+	// IPv4 when IPv6 endpoint is bound or connected to an IPv4 mapped
+	// address).
+	effectiveNetProtos []tcpip.NetworkProtocolNumber
+
+	// workerRunning specifies if a worker goroutine is running.
+	workerRunning bool
+
+	// acceptedChan is used by a listening endpoint protocol goroutine to
+	// send newly accepted connections to the endpoint so that they can be
+	// read by Accept() calls.
+	acceptedChan chan *endpoint
+
+	// The following are only used to assist the restore run to re-connect.
+	bindAddress       tcpip.Address
+	connectingAddress tcpip.Address
 }
 
 func newEndpoint(stack *stack.Stack, netProto tcpip.NetworkProtocolNumber, waiterQueue *waiter.Queue) *endpoint {
@@ -71,6 +93,30 @@ func (e *endpoint) Peek([][]byte) (uintptr, tcpip.ControlMessages, *tcpip.Error)
 	return 0, tcpip.ControlMessages{}, nil
 }
 
+func (e *endpoint) checkV4Mapped(addr *tcpip.FullAddress) (tcpip.NetworkProtocolNumber, *tcpip.Error) {
+	netProto := e.netProto
+	if header.IsV4MappedAddress(addr.Addr) {
+		// Fail if using a v4 mapped address on a v6only endpoint.
+		if e.v6only {
+			return 0, tcpip.ErrNoRoute
+		}
+
+		netProto = header.IPv4ProtocolNumber
+		addr.Addr = addr.Addr[header.IPv6AddressSize-header.IPv4AddressSize:]
+		if addr.Addr == "\x00\x00\x00\x00" {
+			addr.Addr = ""
+		}
+	}
+
+	// Fail if we're bound to an address length different from the one we're
+	// checking.
+	if l := len(e.id.LocalAddress); l != 0 && len(addr.Addr) != 0 && l != len(addr.Addr) {
+		return 0, tcpip.ErrInvalidEndpointState
+	}
+
+	return netProto, nil
+}
+
 func (e *endpoint) Connect(address tcpip.FullAddress) *tcpip.Error {
 	return nil
 }
@@ -79,18 +125,134 @@ func (e *endpoint) Shutdown(flags tcpip.ShutdownFlags) *tcpip.Error {
 	return nil
 }
 
-func (e *endpoint) Listen(backlog int) *tcpip.Error {
+func (e *endpoint) Listen(backlog int) (err *tcpip.Error) {
+	log.Println("监听一个tcp端口")
+	e.mu.Lock()
+	defer e.mu.Unlock()
+	defer func() {
+		if err != nil && err.IgnoreStats() {
+			e.stack.Stats().TCP.FailedConnectionAttempts.Increment()
+		}
+	}()
+
+	// TODO 需要添加
+
+	// 在调用 Listen 之前，必须先 Bind
+	if e.state != stateBound {
+		return tcpip.ErrInvalidEndpointState
+	}
+	// 注册该端点，这样网络层在分发数据包的时候就可以根据 id 来找到这个端点，接着把报文发送给这个端点。
+	if err := e.stack.RegisterTransportEndpoint(e.boundNICID,
+		e.effectiveNetProtos, ProtocolNumber, e.id, e); err != nil {
+		return err
+	}
+
+	e.isRegistered = true
+	e.state = stateListen
+	if e.acceptedChan == nil {
+		e.acceptedChan = make(chan *endpoint, backlog)
+	}
+	e.workerRunning = true
+
+	e.stack.Stats().TCP.PassiveConnectionOpenings.Increment()
+	// TODO tcp服务端实现的主循环，这个函数很重要，用一个goroutine来服务
+	go e.protocolListenLoop(seqnum.Size(0))
+
 	return nil
 }
 
+// startAcceptedLoop sets up required state and starts a goroutine with the
+// main loop for accepted connections.
+func (e *endpoint) startAcceptedLoop(waiterQueue *waiter.Queue) {
+	e.waiterQueue = waiterQueue
+	e.workerRunning = true
+	go e.protocolMainLoop(false)
+}
+
 func (e *endpoint) Accept() (tcpip.Endpoint, *waiter.Queue, *tcpip.Error) {
-	return nil, nil, nil
+	e.mu.RLock()
+	defer e.mu.RUnlock()
+
+	// Endpoint must be in listen state before it can accept connections.
+	if e.state != stateListen {
+		return nil, nil, tcpip.ErrInvalidEndpointState
+	}
+
+	var n *endpoint
+	select {
+	case n = <-e.acceptedChan:
+	default:
+		return nil, nil, tcpip.ErrWouldBlock
+	}
+	wq := &waiter.Queue{}
+	n.startAcceptedLoop(wq)
+	return n, wq, nil
 }
 
 // Bind binds the endpoint to a specific local port and optionally address.
 // 将端点绑定到特定的本地端口和可选的地址。
-func (e *endpoint) Bind(address tcpip.FullAddress, commit func() *tcpip.Error) *tcpip.Error {
-	log.Println("绑定一个tcp端口")
+func (e *endpoint) Bind(addr tcpip.FullAddress, commit func() *tcpip.Error) *tcpip.Error {
+	e.mu.Lock()
+	defer e.mu.Unlock()
+
+	// 如果端点不是处于初始状态，则不允许绑定。这是因为一旦端点进入连接或监听状态，它就已经绑定了。
+	if e.state != stateInitial {
+		return tcpip.ErrAlreadyBound
+	}
+	// 确定tcp端的绑定ip
+	e.bindAddress = addr.Addr
+	netProto, err := e.checkV4Mapped(&addr)
+	if err != nil {
+		return err
+	}
+	// 确定tcp支持的网络层协议
+	netProtos := []tcpip.NetworkProtocolNumber{netProto}
+	if netProto == header.IPv6ProtocolNumber && !e.v6only && addr.Addr == "" {
+		netProtos = []tcpip.NetworkProtocolNumber{
+			header.IPv6ProtocolNumber,
+			header.IPv4ProtocolNumber,
+		}
+	}
+	// 绑定端口
+	port, err := e.stack.ReservePort(netProtos, ProtocolNumber, addr.Addr, addr.Port)
+	if err != nil {
+		return err
+	}
+	e.isPortReserved = true
+	e.effectiveNetProtos = netProtos
+	e.id.LocalPort = port
+
+	defer func() {
+		// 如果有错，在退出的时候应该解除端口绑定
+		if err != nil {
+			e.stack.ReleasePort(netProtos, ProtocolNumber, addr.Addr, port)
+			e.isPortReserved = false
+			e.effectiveNetProtos = nil
+			e.id.LocalPort = 0
+			e.id.LocalAddress = ""
+			e.boundNICID = 0
+		}
+	}()
+	// 如果指定了ip地址 需要检查一下这个ip地址本地是否绑定过
+	if len(addr.Addr) != 0 {
+		nic := e.stack.CheckLocalAddress(addr.NIC, netProto, addr.Addr)
+		if nic == 0 {
+			return tcpip.ErrBadLocalAddress
+		}
+
+		e.boundNICID = nic
+		e.id.LocalAddress = addr.Addr
+	}
+
+	// Check the commit function.
+	if commit != nil {
+		if err := commit(); err != nil {
+			// The defer takes care of unwind.
+			return err
+		}
+	}
+	// 标记状态为 stateBound
+	e.state = stateBound
 
 	return nil
 }
@@ -132,3 +294,22 @@ func (e *endpoint) SetSockOpt(opt interface{}) *tcpip.Error {
 func (e *endpoint) GetSockOpt(opt interface{}) *tcpip.Error {
 	return nil
 }
+
+func (e *endpoint) HandlePacket(r *stack.Route, id stack.TransportEndpointID, vv buffer.VectorisedView) {
+	log.Println("接收到数据")
+	s := newSegment(r, id, vv)
+	// 解析tcp段，如果解析失败，丢弃该报文
+	if !s.parse() {
+		e.stack.Stats().MalformedRcvdPackets.Increment()
+		e.stack.Stats().TCP.InvalidSegmentsReceived.Increment()
+		s.decRef()
+		return
+	}
+
+	e.stack.Stats().TCP.ValidSegmentsReceived.Increment() // 有效报文喜加一
+	log.Println(s)
+}
+
+func (e *endpoint) HandleControlPacket(id stack.TransportEndpointID, typ stack.ControlType, extra uint32, vv buffer.VectorisedView) {
+
+}

tcpip/transport/tcp/segment.go

@@ -0,0 +1,45 @@
+package tcp
+
+import (
+	"log"
+	"netstack/tcpip/buffer"
+	"netstack/tcpip/header"
+	"netstack/tcpip/stack"
+	"sync/atomic"
+)
+
+// tcp 太复杂了 专门写一个协议解析器
+
+// segment 表示一个 TCP 段。它保存有效负载和解析的 TCP 段信息，并且可以添加到侵入列表中
+type segment struct {
+	segmentEntry
+	refCnt int32
+	id     stack.TransportEndpointID
+	route  stack.Route
+	data   buffer.VectorisedView
+	// views is used as buffer for data when its length is large
+	// enough to store a VectorisedView.
+	views [8]buffer.View
+	// TODO 需要添加
+}
+
+func newSegment(r *stack.Route, id stack.TransportEndpointID, vv buffer.VectorisedView) *segment {
+	s := &segment{refCnt: 1, id: id, route: r.Clone()}
+	s.data = vv.Clone(s.views[:])
+	return s
+}
+
+func (s *segment) decRef() {
+	if atomic.AddInt32(&s.refCnt, -1) == 0 {
+		s.route.Release()
+	}
+}
+
+func (s *segment) incRef() {
+	atomic.AddInt32(&s.refCnt, 1)
+}
+
+func (s *segment) parse() bool {
+	log.Println(header.TCP(s.data.First()))
+	return false
+}

tcpip/transport/tcp/tcp_segment_list.go

@@ -0,0 +1,173 @@
+package tcp
+
+// ElementMapper provides an identity mapping by default.
+//
+// This can be replaced to provide a struct that maps elements to linker
+// objects, if they are not the same. An ElementMapper is not typically
+// required if: Linker is left as is, Element is left as is, or Linker and
+// Element are the same type.
+type segmentElementMapper struct{}
+
+// linkerFor maps an Element to a Linker.
+//
+// This default implementation should be inlined.
+//
+//go:nosplit
+func (segmentElementMapper) linkerFor(elem *segment) *segment { return elem }
+
+// List is an intrusive list. Entries can be added to or removed from the list
+// in O(1) time and with no additional memory allocations.
+//
+// The zero value for List is an empty list ready to use.
+//
+// To iterate over a list (where l is a List):
+//      for e := l.Front(); e != nil; e = e.Next() {
+// 		// do something with e.
+//      }
+//
+// +stateify savable
+type segmentList struct {
+	head *segment
+	tail *segment
+}
+
+// Reset resets list l to the empty state.
+func (l *segmentList) Reset() {
+	l.head = nil
+	l.tail = nil
+}
+
+// Empty returns true iff the list is empty.
+func (l *segmentList) Empty() bool {
+	return l.head == nil
+}
+
+// Front returns the first element of list l or nil.
+func (l *segmentList) Front() *segment {
+	return l.head
+}
+
+// Back returns the last element of list l or nil.
+func (l *segmentList) Back() *segment {
+	return l.tail
+}
+
+// PushFront inserts the element e at the front of list l.
+func (l *segmentList) PushFront(e *segment) {
+	segmentElementMapper{}.linkerFor(e).SetNext(l.head)
+	segmentElementMapper{}.linkerFor(e).SetPrev(nil)
+
+	if l.head != nil {
+		segmentElementMapper{}.linkerFor(l.head).SetPrev(e)
+	} else {
+		l.tail = e
+	}
+
+	l.head = e
+}
+
+// PushBack inserts the element e at the back of list l.
+func (l *segmentList) PushBack(e *segment) {
+	segmentElementMapper{}.linkerFor(e).SetNext(nil)
+	segmentElementMapper{}.linkerFor(e).SetPrev(l.tail)
+
+	if l.tail != nil {
+		segmentElementMapper{}.linkerFor(l.tail).SetNext(e)
+	} else {
+		l.head = e
+	}
+
+	l.tail = e
+}
+
+// PushBackList inserts list m at the end of list l, emptying m.
+func (l *segmentList) PushBackList(m *segmentList) {
+	if l.head == nil {
+		l.head = m.head
+		l.tail = m.tail
+	} else if m.head != nil {
+		segmentElementMapper{}.linkerFor(l.tail).SetNext(m.head)
+		segmentElementMapper{}.linkerFor(m.head).SetPrev(l.tail)
+
+		l.tail = m.tail
+	}
+
+	m.head = nil
+	m.tail = nil
+}
+
+// InsertAfter inserts e after b.
+func (l *segmentList) InsertAfter(b, e *segment) {
+	a := segmentElementMapper{}.linkerFor(b).Next()
+	segmentElementMapper{}.linkerFor(e).SetNext(a)
+	segmentElementMapper{}.linkerFor(e).SetPrev(b)
+	segmentElementMapper{}.linkerFor(b).SetNext(e)
+
+	if a != nil {
+		segmentElementMapper{}.linkerFor(a).SetPrev(e)
+	} else {
+		l.tail = e
+	}
+}
+
+// InsertBefore inserts e before a.
+func (l *segmentList) InsertBefore(a, e *segment) {
+	b := segmentElementMapper{}.linkerFor(a).Prev()
+	segmentElementMapper{}.linkerFor(e).SetNext(a)
+	segmentElementMapper{}.linkerFor(e).SetPrev(b)
+	segmentElementMapper{}.linkerFor(a).SetPrev(e)
+
+	if b != nil {
+		segmentElementMapper{}.linkerFor(b).SetNext(e)
+	} else {
+		l.head = e
+	}
+}
+
+// Remove removes e from l.
+func (l *segmentList) Remove(e *segment) {
+	prev := segmentElementMapper{}.linkerFor(e).Prev()
+	next := segmentElementMapper{}.linkerFor(e).Next()
+
+	if prev != nil {
+		segmentElementMapper{}.linkerFor(prev).SetNext(next)
+	} else {
+		l.head = next
+	}
+
+	if next != nil {
+		segmentElementMapper{}.linkerFor(next).SetPrev(prev)
+	} else {
+		l.tail = prev
+	}
+}
+
+// Entry is a default implementation of Linker. Users can add anonymous fields
+// of this type to their structs to make them automatically implement the
+// methods needed by List.
+//
+// +stateify savable
+type segmentEntry struct {
+	next *segment
+	prev *segment
+}
+
+// Next returns the entry that follows e in the list.
+func (e *segmentEntry) Next() *segment {
+	return e.next
+}
+
+// Prev returns the entry that precedes e in the list.
+func (e *segmentEntry) Prev() *segment {
+	return e.prev
+}
+
+// SetNext assigns 'entry' as the entry that follows e in the list.
+func (e *segmentEntry) SetNext(elem *segment) {
+	e.next = elem
+}
+
+// SetPrev assigns 'entry' as the entry that precedes e in the list.
+func (e *segmentEntry) SetPrev(elem *segment) {
+	e.prev = elem
+}

tcpip/transport/udp/endpoint.go

@@ -834,7 +834,7 @@ func (e *endpoint) GetSockOpt(opt interface{}) *tcpip.Error {
 // 但是队列存数据量是有限制的，这个限制叫接收缓存大小，当接收队列中的数据总和超过这个缓存，那么接下来的这些报文将会被直接丢包。
 func (e *endpoint) HandlePacket(r *stack.Route, id stack.TransportEndpointID, vv buffer.VectorisedView) {
 	// Get the header then trim it from the view.
-	hdr := header.UDP(vv.ToView())
+	hdr := header.UDP(vv.First())
 	if int(hdr.Length()) > vv.Size() {
 		// Malformed packet.
 		// 错误报文