Bump python-multipart from 0.0.12 to 0.0.20 in /docker/main

Bumps [python-multipart](https://github.com/Kludex/python-multipart) from 0.0.12 to 0.0.20.
- [Release notes](https://github.com/Kludex/python-multipart/releases)
- [Changelog](https://github.com/Kludex/python-multipart/blob/master/CHANGELOG.md)
- [Commits](https://github.com/Kludex/python-multipart/compare/0.0.12...0.0.20)

---
updated-dependencies:
- dependency-name: python-multipart
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>

.cspell/frigate-dictionary.txt

@@ -1,168 +1,317 @@
-rtmp
-edgetpu
-labelmap
-rockchip
-jetson
-rocm
-vaapi
-CUDA
-hwaccel
-RTSP
-Hikvision
-Dahua
-Amcrest
-Reolink
-Loryta
-Beelink
-Celeron
-vaapi
-blakeblackshear
-workdir
-onvif
-autotracking
-openvino
-tflite
-deepstack
-codeproject
-udev
-tailscale
-restream
-restreaming
-webrtc
-ssdlite
-mobilenet
-mosquitto
-datasheet
-Jellyfin
-Radeon
-libva
-Ubiquiti
-Unifi
-Tapo
-Annke
-autotracker
-autotracked
-variations
-ONVIF
-traefik
-devcontainer
-rootfs
-ffprobe
-autotrack
-logpipe
-imread
-imwrite
-imencode
-imutils
-thresholded
-timelapse
-ultrafast
-sleeptime
-radeontop
-vainfo
-tmpfs
-homography
-websockets
-LIBAVFORMAT
-NTSC
-onnxruntime
-fourcc
-radeonsi
-paho
-imagestream
-jsonify
-cgroups
-sysconf
-memlimit
-gpuload
-nvml
-setproctitle
-psutil
-Kalman
-frontdoor
-namedtuples
-zeep
-fflags
-probesize
-wallclock
-rknn
-socs
-pydantic
-shms
-imdecode
-colormap
-webui
-mse
-jsmpeg
-unreviewed
-Chromecast
-Swipeable
-flac
-scroller
-cmdline
-toggleable
-bottombar
-opencv
-apexcharts
-buildx
-mqtt
-rawvideo
-defragment
-Norfair
-subclassing
-yolo
-tensorrt
-blackshear
-stylelint
-HACS
-homeassistant
-hass
-castable
-mobiledet
-framebuffer
-mjpeg
-substream
-codeowner
-noninteractive
-restreamed
-mountpoint
-fstype
-OWASP
-iotop
-letsencrypt
-fullchain
-lsusb
-iostat
-usermod
-balena
-passwordless
-debconf
-dpkg
-poweroff
-surveillance
-qnap
-homekit
-colorspace
-quantisation
-skylake
-Cuvid
-foscam
-onnx
-numpy
-protobuf
 aarch
+absdiff
+airockchip
+Alloc
+alpr
+Amcrest
 amdgpu
-chipset
-referer
-mpegts
-webp
+analyzeduration
+Annke
+apexcharts
+arange
+argmax
+argmin
+argpartition
+ascontiguousarray
+astype
 authelia
 authentik
-unichip
-rebranded
-udevadm
+autodetected
 automations
-unraid
-hideable
+autotrack
+autotracked
+autotracker
+autotracking
+balena
+Beelink
+BGRA
+BHWC
+blackshear
+blakeblackshear
+bottombar
+buildx
+castable
+cdist
+Celeron
+cgroups
+chipset
+chromadb
+Chromecast
+cmdline
+codeowner
+CODEOWNERS
+codeproject
+colormap
+colorspace
+comms
+cooldown
+coro
+ctypeslib
+CUDA
+Cuvid
+Dahua
+datasheet
+debconf
+deci
+deepstack
+defragment
+devcontainer
+DEVICEMAP
+discardcorrupt
+dpkg
+dsize
+dtype
+ECONNRESET
+edgetpu
+facenet
+fastapi
+faststart
+fflags
+ffprobe
+fillna
+flac
+foscam
+fourcc
+framebuffer
+fregate
+frégate
+fromarray
+frombuffer
+frontdoor
+fstype
+fullchain
+fullscreen
+genai
+generativeai
+genpts
+getpid
+gpuload
+HACS
+Hailo
+hass
+hconcat
 healthcheck
+hideable
+Hikvision
+homeassistant
+homekit
+homography
+hsize
+hstack
+httpx
+hwaccel
+hwdownload
+hwmap
+hwupload
+iloc
+imagestream
+imdecode
+imencode
+imread
+imutils
+imwrite
+interp
+iostat
+iotop
+itemsize
+Jellyfin
+jetson
+jetsons
+jina
+jinaai
+joserfc
+jsmpeg
+jsonify
+Kalman
 keepalive
+keepdims
+labelmap
+letsencrypt
+levelname
+LIBAVFORMAT
+libedgetpu
+libnvinfer
+libva
+libwebp
+libx
+libyolo
+linalg
+localzone
+logpipe
+Loryta
+lstsq
+lsusb
+markupsafe
+maxsplit
+MEMHOSTALLOC
+memlimit
+meshgrid
+metadatas
+migraphx
+minilm
+mjpeg
+mkfifo
+mobiledet
+mobilenet
+modelpath
+mosquitto
+mountpoint
+movflags
+mpegts
+mqtt
+mse
+msenc
+namedtuples
+nbytes
+nchw
+ndarray
+ndimage
+nethogs
+newaxis
+nhwc
+NOBLOCK
+nobuffer
+nokey
+NONBLOCK
+noninteractive
+noprint
+Norfair
+nptype
+NTSC
+numpy
+nvenc
+nvhost
+nvml
+nvmpi
+ollama
+onnx
+onnxruntime
+onvif
+ONVIF
+openai
+opencv
+openvino
+OWASP
+paddleocr
+paho
+passwordless
+popleft
+posthog
+postprocess
+poweroff
+preexec
+probesize
+protobuf
+pstate
+psutil
+pubkey
+putenv
+pycache
+pydantic
+pyobj
+pysqlite
+pytz
+pywebpush
+qnap
+quantisation
+Radeon
+radeonsi
+radeontop
+rawvideo
+rcond
+RDONLY
+rebranded
+referer
+reindex
+Reolink
+restream
+restreamed
+restreaming
+rkmpp
+rknn
+rkrga
+rockchip
+rocm
+rocminfo
+rootfs
+rtmp
+RTSP
+ruamel
+scroller
+setproctitle
+setpts
+shms
+SIGUSR
+skylake
+sleeptime
+SNDMORE
+socs
+sqliteq
+sqlitevecq
+ssdlite
+statm
+stimeout
+stylelint
+subclassing
+substream
+superfast
+surveillance
+svscan
+Swipeable
+sysconf
+tailscale
+Tapo
+tensorrt
+tflite
+thresholded
+timelapse
+tmpfs
+tobytes
+toggleable
+traefik
+tzlocal
+Ubiquiti
+udev
+udevadm
+ultrafast
+unichip
+unidecode
+Unifi
+unixepoch
+unraid
+unreviewed
+userdata
+usermod
+uvicorn
+vaapi
+vainfo
+variations
+vbios
+vconcat
+vitb
+vstream
+vsync
+wallclock
+webp
+webpush
+webrtc
+websockets
+webui
+werkzeug
+workdir
+WRONLY
+wsgirefserver
+wsgiutils
+wsize
+xaddr
+xmaxs
+xmins
+XPUB
+XSUB
+ymaxs
+ymins
+yolo
+yolonas
+yolox
+zeep
+zerolatency

.devcontainer/devcontainer.json

@@ -8,9 +8,25 @@
   "overrideCommand": false,
   "remoteUser": "vscode",
   "features": {
-    "ghcr.io/devcontainers/features/common-utils:1": {}
+    "ghcr.io/devcontainers/features/common-utils:2": {}
+    // Uncomment the following lines to use ONNX Runtime with CUDA support
+    // "ghcr.io/devcontainers/features/nvidia-cuda:1": {
+    //   "installCudnn": true,
+    //   "installNvtx": true,
+    //   "installToolkit": true,
+    //   "cudaVersion": "12.5",
+    //   "cudnnVersion": "9.4.0.58"
+    // },
+    // "./features/onnxruntime-gpu": {}
   },
-  "forwardPorts": [8971, 5000, 5001, 5173, 8554, 8555],
+  "forwardPorts": [
+    8971,
+    5000,
+    5001,
+    5173,
+    8554,
+    8555
+  ],
   "portsAttributes": {
     "8971": {
       "label": "External NGINX",
@@ -52,7 +68,8 @@
         "csstools.postcss",
         "blanu.vscode-styled-jsx",
         "bradlc.vscode-tailwindcss",
-        "charliermarsh.ruff"
+        "charliermarsh.ruff",
+        "eamodio.gitlens"
       ],
       "settings": {
         "remote.autoForwardPorts": false,
@@ -63,10 +80,18 @@
         "editor.formatOnType": true,
         "python.testing.pytestEnabled": false,
         "python.testing.unittestEnabled": true,
-        "python.testing.unittestArgs": ["-v", "-s", "./frigate/test"],
+        "python.testing.unittestArgs": [
+          "-v",
+          "-s",
+          "./frigate/test"
+        ],
         "files.trimTrailingWhitespace": true,
-        "eslint.workingDirectories": ["./web"],
-        "isort.args": ["--settings-path=./pyproject.toml"],
+        "eslint.workingDirectories": [
+          "./web"
+        ],
+        "isort.args": [
+          "--settings-path=./pyproject.toml"
+        ],
         "[python]": {
           "editor.defaultFormatter": "charliermarsh.ruff",
           "editor.formatOnSave": true,
@@ -85,8 +110,15 @@
           ],
           "editor.tabSize": 2
         },
-        "cSpell.ignoreWords": ["rtmp"],
-        "cSpell.words": ["preact", "astype", "hwaccel", "mqtt"]
+        "cSpell.ignoreWords": [
+          "rtmp"
+        ],
+        "cSpell.words": [
+          "preact",
+          "astype",
+          "hwaccel",
+          "mqtt"
+        ]
       }
     }
   }

.devcontainer/features/onnxruntime-gpu/devcontainer-feature.json

@@ -0,0 +1,22 @@
+{
+  "id": "onnxruntime-gpu",
+  "version": "0.0.1",
+  "name": "ONNX Runtime GPU (Nvidia)",
+  "description": "Installs ONNX Runtime for Nvidia GPUs.",
+  "documentationURL": "",
+  "options": {
+    "version": {
+      "type": "string",
+      "proposals": [
+        "latest",
+        "1.20.1",
+        "1.20.0"
+      ],
+      "default": "latest",
+      "description": "Version of ONNX Runtime to install"
+    }
+  },
+  "installsAfter": [
+    "ghcr.io/devcontainers/features/nvidia-cuda"
+  ]
+}

.devcontainer/features/onnxruntime-gpu/install.sh

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+
+set -e
+
+VERSION=${VERSION}
+
+python3 -m pip config set global.break-system-packages true
+# if VERSION == "latest" or VERSION is empty, install the latest version
+if [ "$VERSION" == "latest" ] || [ -z "$VERSION" ]; then
+    python3 -m pip install onnxruntime-gpu
+else
+    python3 -m pip install onnxruntime-gpu==$VERSION
+fi
+
+echo "Done!"

.devcontainer/post_create.sh

@@ -3,10 +3,12 @@
 set -euxo pipefail
 
 # Cleanup the old github host key
-sed -i -e '/AAAAB3NzaC1yc2EAAAABIwAAAQEAq2A7hRGmdnm9tUDbO9IDSwBK6TbQa+PXYPCPy6rbTrTtw7PHkccKrpp0yVhp5HdEIcKr6pLlVDBfOLX9QUsyCOV0wzfjIJNlGEYsdlLJizHhbn2mUjvSAHQqZETYP81eFzLQNnPHt4EVVUh7VfDESU84KezmD5QlWpXLmvU31\/yMf+Se8xhHTvKSCZIFImWwoG6mbUoWf9nzpIoaSjB+weqqUUmpaaasXVal72J+UX2B+2RPW3RcT0eOzQgqlJL3RKrTJvdsjE3JEAvGq3lGHSZXy28G3skua2SmVi\/w4yCE6gbODqnTWlg7+wC604ydGXA8VJiS5ap43JXiUFFAaQ==/d' ~/.ssh/known_hosts
-# Add new github host key
-curl -L https://api.github.com/meta | jq -r '.ssh_keys | .[]' | \
-  sed -e 's/^/github.com /' >> ~/.ssh/known_hosts
+if [[ -f ~/.ssh/known_hosts ]]; then
+  # Add new github host key
+  sed -i -e '/AAAAB3NzaC1yc2EAAAABIwAAAQEAq2A7hRGmdnm9tUDbO9IDSwBK6TbQa+PXYPCPy6rbTrTtw7PHkccKrpp0yVhp5HdEIcKr6pLlVDBfOLX9QUsyCOV0wzfjIJNlGEYsdlLJizHhbn2mUjvSAHQqZETYP81eFzLQNnPHt4EVVUh7VfDESU84KezmD5QlWpXLmvU31\/yMf+Se8xhHTvKSCZIFImWwoG6mbUoWf9nzpIoaSjB+weqqUUmpaaasXVal72J+UX2B+2RPW3RcT0eOzQgqlJL3RKrTJvdsjE3JEAvGq3lGHSZXy28G3skua2SmVi\/w4yCE6gbODqnTWlg7+wC604ydGXA8VJiS5ap43JXiUFFAaQ==/d' ~/.ssh/known_hosts
+  curl -L https://api.github.com/meta | jq -r '.ssh_keys | .[]' | \
+    sed -e 's/^/github.com /' >> ~/.ssh/known_hosts
+fi
 
 # Frigate normal container runs as root, so it have permission to create
 # the folders. But the devcontainer runs as the host user, so we need to
@@ -17,7 +19,7 @@ sudo chown -R "$(id -u):$(id -g)" /media/frigate
 # When started as a service, LIBAVFORMAT_VERSION_MAJOR is defined in the
 # s6 service file. For dev, where frigate is started from an interactive
 # shell, we define it in .bashrc instead.
-echo 'export LIBAVFORMAT_VERSION_MAJOR=$(ffmpeg -version | grep -Po "libavformat\W+\K\d+")' >> $HOME/.bashrc
+echo 'export LIBAVFORMAT_VERSION_MAJOR=$("$(python3 /usr/local/ffmpeg/get_ffmpeg_path.py)" -version | grep -Po "libavformat\W+\K\d+")' >> "$HOME/.bashrc"
 
 make version
 

.github/DISCUSSION_TEMPLATE/bug-report.yml

@@ -1,83 +0,0 @@
-title: "[Bug]: "
-labels: ["bug", "triage"]
-body:
-  - type: textarea
-    id: description
-    attributes:
-      label: Describe the problem you are having
-    validations:
-      required: true
-  - type: textarea
-    id: steps
-    attributes:
-      label: Steps to reproduce
-    validations:
-      required: true
-  - type: input
-    id: version
-    attributes:
-      label: Version
-      description: Visible on the System page in the Web UI
-    validations:
-      required: true
-  - type: textarea
-    id: config
-    attributes:
-      label: Frigate config file
-      description: This will be automatically formatted into code, so no need for backticks.
-      render: yaml
-    validations:
-      required: true
-  - type: textarea
-    id: logs
-    attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
-      render: shell
-    validations:
-      required: true
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - HassOS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
-  - type: dropdown
-    id: install-method
-    attributes:
-      label: Install method
-      options:
-        - HassOS Addon
-        - Docker Compose
-        - Docker CLI
-    validations:
-      required: true
-  - type: dropdown
-    id: network
-    attributes:
-      label: Network connection
-      options:
-        - Wired
-        - Wireless
-        - Mixed
-    validations:
-      required: true
-  - type: input
-    id: camera
-    attributes:
-      label: Camera make and model
-      description: Dahua, hikvision, amcrest, reolink, etc and model number
-    validations:
-      required: true
-  - type: textarea
-    id: other
-    attributes:
-      label: Any other information that may be helpful

.github/DISCUSSION_TEMPLATE/camera-support.yml

@@ -1,6 +1,16 @@
 title: "[Camera Support]: "
 labels: ["support", "triage"]
 body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support or questions for an issue with your cameras.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
   - type: textarea
     id: description
     attributes:
@@ -11,9 +21,15 @@ body:
     id: version
     attributes:
       label: Version
-      description: Visible on the System page in the Web UI
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
     validations:
       required: true
+  - type: input
+    attributes:
+      label: What browser(s) are you using?
+      placeholder: Google Chrome 88.0.4324.150
+      description: >
+        Provide the full name and don't forget to add the version!
   - type: textarea
     id: config
     attributes:
@@ -23,10 +39,18 @@ body:
     validations:
       required: true
   - type: textarea
-    id: logs
+    id: frigatelogs
     attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
       render: shell
     validations:
       required: true
@@ -34,7 +58,7 @@ body:
     id: ffprobe
     attributes:
       label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` and provide output below
+      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
       render: shell
     validations:
       required: true
@@ -66,6 +90,9 @@ body:
         - HassOS Addon
         - Docker Compose
         - Docker CLI
+        - Proxmox via Docker
+        - Proxmox via TTeck Script
+        - Windows WSL2
     validations:
       required: true
   - type: dropdown
@@ -98,6 +125,13 @@ body:
       description: Dahua, hikvision, amcrest, reolink, etc and model number
     validations:
       required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
+    validations:
+      required: true
   - type: textarea
     id: other
     attributes:

.github/DISCUSSION_TEMPLATE/config-support.yml

@@ -1,6 +1,16 @@
 title: "[Config Support]: "
 labels: ["support", "triage"]
 body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support or questions related to Frigate's configuration and config file.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
   - type: textarea
     id: description
     attributes:
@@ -11,7 +21,7 @@ body:
     id: version
     attributes:
       label: Version
-      description: Visible on the System page in the Web UI
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
     validations:
       required: true
   - type: textarea
@@ -23,10 +33,18 @@ body:
     validations:
       required: true
   - type: textarea
-    id: logs
+    id: frigatelogs
     attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
       render: shell
     validations:
       required: true
@@ -58,6 +76,17 @@ body:
         - HassOS Addon
         - Docker Compose
         - Docker CLI
+        - Proxmox via Docker
+        - Proxmox via TTeck Script
+        - Windows WSL2
+    validations:
+      required: true
+  - type: textarea
+    id: docker
+    attributes:
+      label: docker-compose file or Docker CLI command
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
     validations:
       required: true
   - type: dropdown
@@ -73,6 +102,11 @@ body:
         - CPU (no coral)
     validations:
       required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop or simple cut/paste is possible in this field
   - type: textarea
     id: other
     attributes:

.github/DISCUSSION_TEMPLATE/detector-support.yml

@@ -1,6 +1,16 @@
 title: "[Detector Support]: "
 labels: ["support", "triage"]
 body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support or questions related to Frigate's object detectors.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
   - type: textarea
     id: description
     attributes:
@@ -11,7 +21,7 @@ body:
     id: version
     attributes:
       label: Version
-      description: Visible on the System page in the Web UI
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
     validations:
       required: true
   - type: textarea
@@ -31,27 +41,13 @@ body:
     validations:
       required: true
   - type: textarea
-    id: logs
+    id: frigatelogs
     attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
       render: shell
     validations:
       required: true
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - HassOS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
   - type: dropdown
     id: install-method
     attributes:
@@ -60,6 +56,9 @@ body:
         - HassOS Addon
         - Docker Compose
         - Docker CLI
+        - Proxmox via Docker
+        - Proxmox via TTeck Script
+        - Windows WSL2
     validations:
       required: true
   - type: dropdown
@@ -75,6 +74,13 @@ body:
         - CPU (no coral)
     validations:
       required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
+    validations:
+      required: true
   - type: textarea
     id: other
     attributes:

.github/DISCUSSION_TEMPLATE/general-support.yml

@@ -1,6 +1,16 @@
 title: "[Support]: "
 labels: ["support", "triage"]
 body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for support for issues that don't fall into any specific category.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
   - type: textarea
     id: description
     attributes:
@@ -11,9 +21,15 @@ body:
     id: version
     attributes:
       label: Version
-      description: Visible on the System page in the Web UI
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
     validations:
       required: true
+  - type: input
+    attributes:
+      label: What browser(s) are you using?
+      placeholder: Google Chrome 88.0.4324.150
+      description: >
+        Provide the full name and don't forget to add the version!
   - type: textarea
     id: config
     attributes:
@@ -23,10 +39,18 @@ body:
     validations:
       required: true
   - type: textarea
-    id: logs
+    id: frigatelogs
     attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
       render: shell
     validations:
       required: true
@@ -34,7 +58,7 @@ body:
     id: ffprobe
     attributes:
       label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` and provide output below
+      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
       render: shell
     validations:
       required: true
@@ -44,20 +68,6 @@ body:
       label: Frigate stats
       description: Output from frigate's /api/stats endpoint
       render: json
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - HassOS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
   - type: dropdown
     id: install-method
     attributes:
@@ -66,6 +76,17 @@ body:
         - HassOS Addon
         - Docker Compose
         - Docker CLI
+        - Proxmox via Docker
+        - Proxmox via TTeck Script
+        - Windows WSL2
+    validations:
+      required: true
+  - type: textarea
+    id: docker
+    attributes:
+      label: docker-compose file or Docker CLI command
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
     validations:
       required: true
   - type: dropdown
@@ -98,6 +119,11 @@ body:
       description: Dahua, hikvision, amcrest, reolink, etc and model number
     validations:
       required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field
   - type: textarea
     id: other
     attributes:

.github/DISCUSSION_TEMPLATE/hardware-acceleration-support.yml

@@ -1,6 +1,16 @@
 title: "[HW Accel Support]: "
 labels: ["support", "triage"]
 body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form to submit a support request for hardware acceleration issues.
+
+        Before submitting your support request, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
   - type: textarea
     id: description
     attributes:
@@ -11,7 +21,7 @@ body:
     id: version
     attributes:
       label: Version
-      description: Visible on the System page in the Web UI
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
     validations:
       required: true
   - type: textarea
@@ -31,10 +41,18 @@ body:
     validations:
       required: true
   - type: textarea
-    id: logs
+    id: frigatelogs
     attributes:
-      label: Relevant log output
-      description: Please copy and paste any relevant log output. This will be automatically formatted into code, so no need for backticks.
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
       render: shell
     validations:
       required: true
@@ -42,24 +60,10 @@ body:
     id: ffprobe
     attributes:
       label: FFprobe output from your camera
-      description: Run `ffprobe <camera_url>` and provide output below
+      description: Run `ffprobe <camera_url>` from within the Frigate container if possible, and provide output below
       render: shell
     validations:
       required: true
-  - type: dropdown
-    id: os
-    attributes:
-      label: Operating system
-      options:
-        - HassOS
-        - Debian
-        - Other Linux
-        - Proxmox
-        - UNRAID
-        - Windows
-        - Other
-    validations:
-      required: true
   - type: dropdown
     id: install-method
     attributes:
@@ -68,6 +72,22 @@ body:
         - HassOS Addon
         - Docker Compose
         - Docker CLI
+        - Proxmox via Docker
+        - Proxmox via TTeck Script
+        - Windows WSL2
+    validations:
+      required: true
+  - type: dropdown
+    id: object-detector
+    attributes:
+      label: Object Detector
+      options:
+        - Coral
+        - OpenVino
+        - TensorRT
+        - RKNN
+        - Other
+        - CPU (no coral)
     validations:
       required: true
   - type: dropdown
@@ -87,6 +107,13 @@ body:
       description: Dahua, hikvision, amcrest, reolink, etc and model number
     validations:
       required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of at least General and Cameras tabs.
+    validations:
+      required: true
   - type: textarea
     id: other
     attributes:

.github/DISCUSSION_TEMPLATE/question.yml

@@ -1,9 +1,21 @@
 title: "[Question]: "
 labels: ["question"]
 body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form for questions you have about Frigate.
+
+        Before submitting your question, please [search the discussions][discussions], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your question has already been answered by the community.
+
+        **If you are looking for support, start a new discussion and use a support category.**
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
   - type: textarea
     id: description
     attributes:
-      label: "What is your question:"
+      label: "What is your question?"
     validations:
       required: true

.github/DISCUSSION_TEMPLATE/report-a-bug.yml

@@ -0,0 +1,146 @@
+title: "[Bug]: "
+labels: ["bug", "triage"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Use this form to submit a reproducible bug in Frigate or Frigate's UI.
+
+        Before submitting your bug report, please [search the discussions][discussions], look at recent open and closed [pull requests][prs], read the [official Frigate documentation][docs], and read the [Frigate FAQ][faq] pinned at the Discussion page to see if your bug has already been fixed by the developers or reported by the community.
+
+        **If you are unsure if your issue is actually a bug or not, please submit a support request first.**
+
+        [discussions]: https://www.github.com/blakeblackshear/frigate/discussions
+        [prs]: https://www.github.com/blakeblackshear/frigate/pulls
+        [docs]: https://docs.frigate.video
+        [faq]: https://github.com/blakeblackshear/frigate/discussions/12724
+  - type: checkboxes
+    attributes:
+      label: Checklist
+      description: Please verify that you've followed these steps
+      options:
+        - label: I have updated to the latest available Frigate version.
+          required: true
+        - label: I have cleared the cache of my browser.
+          required: true
+        - label: I have tried a different browser to see if it is related to my browser.
+          required: true
+        - label: I have tried reproducing the issue in [incognito mode](https://www.computerworld.com/article/1719851/how-to-go-incognito-in-chrome-firefox-safari-and-edge.html) to rule out problems with any third party extensions or plugins I have installed.
+  - type: textarea
+    id: description
+    attributes:
+      label: Describe the problem you are having
+      description: Provide a clear and concise description of what the bug is.
+    validations:
+      required: true
+  - type: textarea
+    id: steps
+    attributes:
+      label: Steps to reproduce
+      description: |
+        Please tell us exactly how to reproduce your issue.
+        Provide clear and concise step by step instructions and add code snippets if needed.
+      value: |
+        1.
+        2.
+        3.
+        ...
+    validations:
+      required: true
+  - type: input
+    id: version
+    attributes:
+      label: Version
+      description: Visible on the System page in the Web UI. Please include the full version including the build identifier (eg. 0.14.0-ea36ds1)
+    validations:
+      required: true
+  - type: input
+    attributes:
+      label: In which browser(s) are you experiencing the issue with?
+      placeholder: Google Chrome 88.0.4324.150
+      description: >
+        Provide the full name and don't forget to add the version!
+  - type: textarea
+    id: config
+    attributes:
+      label: Frigate config file
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: docker
+    attributes:
+      label: docker-compose file or Docker CLI command
+      description: This will be automatically formatted into code, so no need for backticks.
+      render: yaml
+    validations:
+      required: true
+  - type: textarea
+    id: frigatelogs
+    attributes:
+      label: Relevant Frigate log output
+      description: Please copy and paste any relevant Frigate log output. Include logs before and after your exact error when possible. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: textarea
+    id: go2rtclogs
+    attributes:
+      label: Relevant go2rtc log output
+      description: Please copy and paste any relevant go2rtc log output. Include logs before and after your exact error when possible. Logs can be viewed via the Frigate UI, Docker, or the go2rtc dashboard. This will be automatically formatted into code, so no need for backticks.
+      render: shell
+    validations:
+      required: true
+  - type: dropdown
+    id: os
+    attributes:
+      label: Operating system
+      options:
+        - HassOS
+        - Debian
+        - Other Linux
+        - Proxmox
+        - UNRAID
+        - Windows
+        - Other
+    validations:
+      required: true
+  - type: dropdown
+    id: install-method
+    attributes:
+      label: Install method
+      options:
+        - HassOS Addon
+        - Docker Compose
+        - Docker CLI
+    validations:
+      required: true
+  - type: dropdown
+    id: network
+    attributes:
+      label: Network connection
+      options:
+        - Wired
+        - Wireless
+        - Mixed
+    validations:
+      required: true
+  - type: input
+    id: camera
+    attributes:
+      label: Camera make and model
+      description: Dahua, hikvision, amcrest, reolink, etc and model number
+    validations:
+      required: true
+  - type: textarea
+    id: screenshots
+    attributes:
+      label: Screenshots of the Frigate UI's System metrics pages
+      description: Drag and drop for images is possible in this field. Please post screenshots of all tabs.
+    validations:
+      required: true
+  - type: textarea
+    id: other
+    attributes:
+      label: Any other information that may be helpful

.github/actions/setup/action.yml

@@ -5,7 +5,7 @@ inputs:
     required: true
 outputs:
   image-name:
-    value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ github.ref_name }}-${{ steps.create-short-sha.outputs.SHORT_SHA }}
+    value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ steps.create-short-sha.outputs.SHORT_SHA }}
   cache-name:
     value: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:cache
 runs:
@@ -33,9 +33,9 @@ runs:
       with:
         string: ${{ github.repository }}
     - name: Set up QEMU
-      uses: docker/setup-qemu-action@v2
+      uses: docker/setup-qemu-action@v3
     - name: Set up Docker Buildx
-      uses: docker/setup-buildx-action@v2
+      uses: docker/setup-buildx-action@v3
     - name: Log in to the Container registry
       uses: docker/login-action@465a07811f14bebb1938fbed4728c6a1ff8901fc
       with:

.github/pull_request_template.md

@@ -0,0 +1,38 @@
+## Proposed change
+<!--
+  Thank you!
+
+  If you're introducing a new feature or significantly refactoring existing functionality, 
+  we encourage you to start a discussion first. This helps ensure your idea aligns with 
+  Frigate's development goals.
+
+  Describe what this pull request does and how it will benefit users of Frigate.
+  Please describe in detail any considerations, breaking changes, etc. that are 
+  made in this pull request.
+-->
+
+
+## Type of change
+
+- [ ] Dependency upgrade
+- [ ] Bugfix (non-breaking change which fixes an issue)
+- [ ] New feature
+- [ ] Breaking change (fix/feature causing existing functionality to break)
+- [ ] Code quality improvements to existing code
+- [ ] Documentation Update
+
+## Additional information
+
+- This PR fixes or closes issue: fixes #
+- This PR is related to issue: 
+
+## Checklist
+
+<!--
+  Put an `x` in the boxes that apply.
+-->
+
+- [ ] The code change is tested and works locally.
+- [ ] Local tests pass. **Your PR cannot be merged unless tests pass**
+- [ ] There is no commented out code in this PR.
+- [ ] The code has been formatted using Ruff (`ruff format frigate`)

.github/workflows/ci.yml

@@ -6,6 +6,8 @@ on:
     branches:
       - dev
       - master
+    paths-ignore:
+      - "docs/**"
 
 # only run the latest commit to avoid cache overwrites
 concurrency:
@@ -17,11 +19,13 @@ env:
 
 jobs:
   amd64_build:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     name: AMD64 Build
     steps:
       - name: Check out code
         uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - name: Set up QEMU and Buildx
         id: setup
         uses: ./.github/actions/setup
@@ -38,11 +42,13 @@ jobs:
           tags: ${{ steps.setup.outputs.image-name }}-amd64
           cache-from: type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64
   arm64_build:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04-arm
     name: ARM Build
     steps:
       - name: Check out code
         uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - name: Set up QEMU and Buildx
         id: setup
         uses: ./.github/actions/setup
@@ -60,8 +66,9 @@ jobs:
             ${{ steps.setup.outputs.image-name }}-standard-arm64
           cache-from: type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64
       - name: Build and push RPi build
-        uses: docker/bake-action@v4
+        uses: docker/bake-action@v6
         with:
+          source: .
           push: true
           targets: rpi
           files: docker/rpi/rpi.hcl
@@ -69,47 +76,15 @@ jobs:
             rpi.tags=${{ steps.setup.outputs.image-name }}-rpi
             *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64
             *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-arm64,mode=max
-      - name: Build and push Rockchip build
-        uses: docker/bake-action@v3
-        with:
-          push: true
-          targets: rk
-          files: docker/rockchip/rk.hcl
-          set: |
-            rk.tags=${{ steps.setup.outputs.image-name }}-rk
-            *.cache-from=type=gha
-  jetson_jp4_build:
-    runs-on: ubuntu-latest
-    name: Jetson Jetpack 4
-    steps:
-      - name: Check out code
-        uses: actions/checkout@v4
-      - name: Set up QEMU and Buildx
-        id: setup
-        uses: ./.github/actions/setup
-        with:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      - name: Build and push TensorRT (Jetson, Jetpack 4)
-        env:
-          ARCH: arm64
-          BASE_IMAGE: timongentzsch/l4t-ubuntu20-opencv:latest
-          SLIM_BASE: timongentzsch/l4t-ubuntu20-opencv:latest
-          TRT_BASE: timongentzsch/l4t-ubuntu20-opencv:latest
-        uses: docker/bake-action@v4
-        with:
-          push: true
-          targets: tensorrt
-          files: docker/tensorrt/trt.hcl
-          set: |
-            tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt-jp4
-            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp4
-            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp4,mode=max
   jetson_jp5_build:
-    runs-on: ubuntu-latest
+    if: false
+    runs-on: ubuntu-22.04
     name: Jetson Jetpack 5
     steps:
       - name: Check out code
         uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - name: Set up QEMU and Buildx
         id: setup
         uses: ./.github/actions/setup
@@ -121,8 +96,9 @@ jobs:
           BASE_IMAGE: nvcr.io/nvidia/l4t-tensorrt:r8.5.2-runtime
           SLIM_BASE: nvcr.io/nvidia/l4t-tensorrt:r8.5.2-runtime
           TRT_BASE: nvcr.io/nvidia/l4t-tensorrt:r8.5.2-runtime
-        uses: docker/bake-action@v4
+        uses: docker/bake-action@v6
         with:
+          source: .
           push: true
           targets: tensorrt
           files: docker/tensorrt/trt.hcl
@@ -130,14 +106,45 @@ jobs:
             tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt-jp5
             *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp5
             *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp5,mode=max
+  jetson_jp6_build:
+    runs-on: ubuntu-22.04-arm
+    name: Jetson Jetpack 6
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
+      - name: Set up QEMU and Buildx
+        id: setup
+        uses: ./.github/actions/setup
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      - name: Build and push TensorRT (Jetson, Jetpack 6)
+        env:
+          ARCH: arm64
+          BASE_IMAGE: nvcr.io/nvidia/tensorrt:23.12-py3-igpu
+          SLIM_BASE: nvcr.io/nvidia/tensorrt:23.12-py3-igpu
+          TRT_BASE: nvcr.io/nvidia/tensorrt:23.12-py3-igpu
+        uses: docker/bake-action@v6
+        with:
+          source: .
+          push: true
+          targets: tensorrt
+          files: docker/tensorrt/trt.hcl
+          set: |
+            tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt-jp6
+            *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp6
+            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-jp6,mode=max
   amd64_extra_builds:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     name: AMD64 Extra Build
     needs:
       - amd64_build
     steps:
       - name: Check out code
         uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - name: Set up QEMU and Buildx
         id: setup
         uses: ./.github/actions/setup
@@ -146,8 +153,9 @@ jobs:
       - name: Build and push TensorRT (x86 GPU)
         env:
           COMPUTE_LEVEL: "50 60 70 80 90"
-        uses: docker/bake-action@v4
+        uses: docker/bake-action@v6
         with:
+          source: .
           push: true
           targets: tensorrt
           files: docker/tensorrt/trt.hcl
@@ -155,61 +163,49 @@ jobs:
             tensorrt.tags=${{ steps.setup.outputs.image-name }}-tensorrt
             *.cache-from=type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64
             *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-amd64,mode=max
-      #- name: AMD/ROCm general build
-      #  env:
-      #    AMDGPU: gfx
-      #    HSA_OVERRIDE: 0
-      #  uses: docker/bake-action@v3
-      #  with:
-      #    push: true
-      #    targets: rocm
-      #    files: docker/rocm/rocm.hcl
-      #    set: |
-      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm
-      #      *.cache-from=type=gha
-      #- name: AMD/ROCm gfx900
-      #  env:
-      #    AMDGPU: gfx900
-      #    HSA_OVERRIDE: 1
-      #    HSA_OVERRIDE_GFX_VERSION: 9.0.0
-      #  uses: docker/bake-action@v3
-      #  with:
-      #    push: true
-      #    targets: rocm
-      #    files: docker/rocm/rocm.hcl
-      #    set: |
-      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm-gfx900
-      #      *.cache-from=type=gha
-      #- name: AMD/ROCm gfx1030
-      #  env:
-      #    AMDGPU: gfx1030
-      #    HSA_OVERRIDE: 1
-      #    HSA_OVERRIDE_GFX_VERSION: 10.3.0
-      #  uses: docker/bake-action@v3
-      #  with:
-      #    push: true
-      #    targets: rocm
-      #    files: docker/rocm/rocm.hcl
-      #    set: |
-      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm-gfx1030
-      #      *.cache-from=type=gha
-      #- name: AMD/ROCm gfx1100
-      #  env:
-      #    AMDGPU: gfx1100
-      #    HSA_OVERRIDE: 1
-      #    HSA_OVERRIDE_GFX_VERSION: 11.0.0
-      #  uses: docker/bake-action@v3
-      #  with:
-      #    push: true
-      #    targets: rocm
-      #    files: docker/rocm/rocm.hcl
-      #    set: |
-      #      rocm.tags=${{ steps.setup.outputs.image-name }}-rocm-gfx1100
-      #      *.cache-from=type=gha
+      - name: AMD/ROCm general build
+        env:
+          AMDGPU: gfx
+          HSA_OVERRIDE: 0
+        uses: docker/bake-action@v6
+        with:
+          source: .
+          push: true
+          targets: rocm
+          files: docker/rocm/rocm.hcl
+          set: |
+            rocm.tags=${{ steps.setup.outputs.image-name }}-rocm
+            *.cache-to=type=registry,ref=${{ steps.setup.outputs.cache-name }}-rocm,mode=max
+            *.cache-from=type=gha
+  arm64_extra_builds:
+    runs-on: ubuntu-22.04-arm
+    name: ARM Extra Build
+    needs:
+      - arm64_build
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
+      - name: Set up QEMU and Buildx
+        id: setup
+        uses: ./.github/actions/setup
+        with:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      - name: Build and push Rockchip build
+        uses: docker/bake-action@v6
+        with:
+          source: .
+          push: true
+          targets: rk
+          files: docker/rockchip/rk.hcl
+          set: |
+            rk.tags=${{ steps.setup.outputs.image-name }}-rk
+            *.cache-from=type=gha
   # The majority of users running arm64 are rpi users, so the rpi
   # build should be the primary arm64 image
   assemble_default_build:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     name: Assemble and push default build
     needs:
       - amd64_build
@@ -220,7 +216,7 @@ jobs:
         with:
           string: ${{ github.repository }}
       - name: Log in to the Container registry
-        uses: docker/login-action@0d4c9c5ea7693da7b068278f7b52bda2a190a446
+        uses: docker/login-action@9780b0c442fbb1117ed29e0efdff1e18412f7567
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
@@ -229,7 +225,7 @@ jobs:
         run: echo "SHORT_SHA=${GITHUB_SHA::7}" >> $GITHUB_ENV
       - uses: int128/docker-manifest-create-action@v2
         with:
-          tags: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ github.ref_name }}-${{ env.SHORT_SHA }}
+          tags: ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}
           sources: |
-            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ github.ref_name }}-${{ env.SHORT_SHA }}-amd64
-            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ github.ref_name }}-${{ env.SHORT_SHA }}-rpi
+            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}-amd64
+            ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}:${{ env.SHORT_SHA }}-rpi

.github/workflows/dependabot-auto-merge.yaml

@@ -1,24 +0,0 @@
-name: dependabot-auto-merge
-on: pull_request
-
-permissions:
-  contents: write
-
-jobs:
-  dependabot-auto-merge:
-    runs-on: ubuntu-latest
-    if: github.actor == 'dependabot[bot]'
-    steps:
-      - name: Get Dependabot metadata
-        id: metadata
-        uses: dependabot/fetch-metadata@v2
-        with:
-          github-token: ${{ secrets.GITHUB_TOKEN }}
-      - name: Enable auto-merge for Dependabot PRs
-        if: steps.metadata.outputs.dependency-type == 'direct:development' && (steps.metadata.outputs.update-type == 'version-update:semver-minor' || steps.metadata.outputs.update-type == 'version-update:semver-patch')
-        run: |
-          gh pr review --approve "$PR_URL"
-          gh pr merge --auto --squash "$PR_URL"
-        env:
-          PR_URL: ${{ github.event.pull_request.html_url }}
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/pull_request.yml

@@ -1,9 +1,13 @@
 name: On pull request
 
-on: pull_request
+on:
+  pull_request:
+    paths-ignore:
+      - "docs/**"
+      - ".github/**"
 
 env:
-  DEFAULT_PYTHON: 3.9
+  DEFAULT_PYTHON: 3.11
 
 jobs:
   build_devcontainer:
@@ -16,9 +20,11 @@ jobs:
       DOCKER_BUILDKIT: "1"
     steps:
       - uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - uses: actions/setup-node@master
         with:
-          node-version: 16.x
+          node-version: 20.x
       - name: Install devcontainer cli
         run: npm install --global @devcontainers/cli
       - name: Build devcontainer
@@ -35,6 +41,8 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - uses: actions/setup-node@master
         with:
           node-version: 16.x
@@ -49,11 +57,16 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - uses: actions/setup-node@master
         with:
           node-version: 20.x
       - run: npm install
         working-directory: ./web
+      - name: Build web
+        run: npm run build
+        working-directory: ./web
       # - name: Test
       #   run: npm run test
       #   working-directory: ./web
@@ -64,8 +77,10 @@ jobs:
     steps:
       - name: Check out the repository
         uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
-        uses: actions/setup-python@v5.1.0
+        uses: actions/setup-python@v5.4.0
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Install requirements
@@ -85,14 +100,8 @@ jobs:
     steps:
       - name: Check out code
         uses: actions/checkout@v4
-      - uses: actions/setup-node@master
         with:
-          node-version: 16.x
-      - run: npm install
-        working-directory: ./web
-      - name: Build web
-        run: npm run build
-        working-directory: ./web
+          persist-credentials: false
       - name: Set up QEMU
         uses: docker/setup-qemu-action@v3
       - name: Set up Docker Buildx

.github/workflows/release.yml

@@ -11,22 +11,27 @@ jobs:
 
     steps:
       - uses: actions/checkout@v4
+        with:
+          persist-credentials: false
       - id: lowercaseRepo
         uses: ASzc/change-string-case-action@v6
         with:
           string: ${{ github.repository }}
       - name: Log in to the Container registry
-        uses: docker/login-action@0d4c9c5ea7693da7b068278f7b52bda2a190a446
+        uses: docker/login-action@9780b0c442fbb1117ed29e0efdff1e18412f7567
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
           password: ${{ secrets.GITHUB_TOKEN }}
       - name: Create tag variables
+        env:
+          TAG: ${{ github.ref_name }}
+          LOWERCASE_REPO: ${{ steps.lowercaseRepo.outputs.lowercase }}
         run: |
-          BRANCH=$([[ "${{ github.ref_name }}" =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]] && echo "master" || echo "dev")
-          echo "BRANCH=${BRANCH}" >> $GITHUB_ENV
-          echo "BASE=ghcr.io/${{ steps.lowercaseRepo.outputs.lowercase }}" >> $GITHUB_ENV
-          echo "BUILD_TAG=${BRANCH}-${GITHUB_SHA::7}" >> $GITHUB_ENV
+          BUILD_TYPE=$([[ "${TAG}" =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]] && echo "stable" || echo "beta")
+          echo "BUILD_TYPE=${BUILD_TYPE}" >> $GITHUB_ENV
+          echo "BASE=ghcr.io/${LOWERCASE_REPO}" >> $GITHUB_ENV
+          echo "BUILD_TAG=${GITHUB_SHA::7}" >> $GITHUB_ENV
           echo "CLEAN_VERSION=$(echo ${GITHUB_REF##*/} | tr '[:upper:]' '[:lower:]' | sed 's/^[v]//')" >> $GITHUB_ENV
       - name: Tag and push the main image
         run: |
@@ -34,14 +39,14 @@ jobs:
           STABLE_TAG=${BASE}:stable
           PULL_TAG=${BASE}:${BUILD_TAG}
           docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG} docker://${VERSION_TAG}
-          for variant in standard-arm64 tensorrt tensorrt-jp4 tensorrt-jp5 rk; do
+          for variant in standard-arm64 tensorrt tensorrt-jp5 tensorrt-jp6 rk h8l rocm; do
             docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG}-${variant} docker://${VERSION_TAG}-${variant}
           done
 
           # stable tag
-          if [[ "${BRANCH}" == "master" ]]; then
+          if [[ "${BUILD_TYPE}" == "stable" ]]; then
             docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG} docker://${STABLE_TAG}
-            for variant in standard-arm64 tensorrt tensorrt-jp4 tensorrt-jp5 rk; do
+            for variant in standard-arm64 tensorrt tensorrt-jp5 tensorrt-jp6 rk h8l rocm; do
               docker run --rm -v $HOME/.docker/config.json:/config.json quay.io/skopeo/stable:latest copy --authfile /config.json --multi-arch all docker://${PULL_TAG}-${variant} docker://${STABLE_TAG}-${variant}
             done
           fi

.github/workflows/stale.yml

@@ -23,19 +23,20 @@ jobs:
           exempt-pr-labels: "pinned,security,dependencies"
           operations-per-run: 120
       - name: Print outputs
-        run: echo ${{ join(steps.stale.outputs.*, ',') }}
-
-  clean_ghcr:
-    name: Delete outdated dev container images
-    runs-on: ubuntu-latest
-    steps:
-      - name: Delete old images
-        uses: snok/container-retention-policy@v2
-        with:
-          image-names: dev-*
-          cut-off: 60 days ago UTC
-          keep-at-least: 5
-          account-type: personal
-          token: ${{ secrets.GITHUB_TOKEN }}
-          token-type: github-token
+        env:
+          STALE_OUTPUT: ${{ join(steps.stale.outputs.*, ',') }}
+        run: echo "$STALE_OUTPUT"
 
+  # clean_ghcr:
+  #   name: Delete outdated dev container images
+  #   runs-on: ubuntu-latest
+  #   steps:
+  #     - name: Delete old images
+  #       uses: snok/container-retention-policy@v2
+  #       with:
+  #         image-names: dev-*
+  #         cut-off: 60 days ago UTC
+  #         keep-at-least: 5
+  #         account-type: personal
+  #         token: ${{ secrets.GITHUB_TOKEN }}
+  #         token-type: github-token

.gitignore

@@ -1,5 +1,6 @@
 .DS_Store
-*.pyc
+__pycache__
+.mypy_cache
 *.swp
 debug
 .vscode/*

.vscode/launch.json

@@ -3,10 +3,9 @@
   "configurations": [
     {
       "name": "Python: Launch Frigate",
-      "type": "python",
+      "type": "debugpy",
       "request": "launch",
-      "module": "frigate",
-      "justMyCode": true
+      "module": "frigate"
     }
   ]
 }

CODEOWNERS

@@ -4,3 +4,4 @@
 /docker/tensorrt/*jetson* @madsciencetist
 /docker/rockchip/ @MarcA711
 /docker/rocm/ @harakas
+/docker/hailo8l/ @spanner3003

Makefile

@@ -1,11 +1,9 @@
 default_target: local
 
 COMMIT_HASH := $(shell git log -1 --pretty=format:"%h"|tail -1)
-VERSION = 0.14.0
+VERSION = 0.16.0
 IMAGE_REPO ?= ghcr.io/blakeblackshear/frigate
 GITHUB_REF_NAME ?= $(shell git rev-parse --abbrev-ref HEAD)
-CURRENT_UID := $(shell id -u)
-CURRENT_GID := $(shell id -g)
 BOARDS= #Initialized empty
 
 include docker/*/*.mk
@@ -18,25 +16,38 @@ version:
 	echo 'VERSION = "$(VERSION)-$(COMMIT_HASH)"' > frigate/version.py
 
 local: version
-	docker buildx build --target=frigate --tag frigate:latest --load --file docker/main/Dockerfile .
+	docker buildx build --target=frigate --file docker/main/Dockerfile . \
+		--tag frigate:latest \
+		--load
 
 amd64:
-	docker buildx build --platform linux/amd64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/main/Dockerfile .
+	docker buildx build --target=frigate --file docker/main/Dockerfile . \
+		--tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) \
+		--platform linux/amd64
 
 arm64:
-	docker buildx build --platform linux/arm64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/main/Dockerfile .
+	docker buildx build --target=frigate --file docker/main/Dockerfile . \
+		--tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) \
+		--platform linux/arm64
 
 build: version amd64 arm64
-	docker buildx build --platform linux/arm64/v8,linux/amd64 --target=frigate --tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) --file docker/main/Dockerfile .
+	docker buildx build --target=frigate --file docker/main/Dockerfile . \
+		--tag $(IMAGE_REPO):$(VERSION)-$(COMMIT_HASH) \
+		--platform linux/arm64/v8,linux/amd64
 
 push: push-boards
-	docker buildx build --push --platform linux/arm64/v8,linux/amd64 --target=frigate --tag $(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH) --file docker/main/Dockerfile .
+	docker buildx build --target=frigate --file docker/main/Dockerfile . \
+		--tag $(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH) \
+		--platform linux/arm64/v8,linux/amd64 \
+		--push
 
 run: local
 	docker run --rm --publish=5000:5000 --volume=${PWD}/config:/config frigate:latest
 
 run_tests: local
-	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest python3 -u -m unittest
-	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest python3 -u -m mypy --config-file frigate/mypy.ini frigate
+	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest \
+		python3 -u -m unittest
+	docker run --rm --workdir=/opt/frigate --entrypoint= frigate:latest \
+		python3 -u -m mypy --config-file frigate/mypy.ini frigate
 
 .PHONY: run_tests

benchmark.py

@@ -4,6 +4,7 @@ from statistics import mean
 
 import numpy as np
 
+import frigate.util as util
 from frigate.config import DetectorTypeEnum
 from frigate.object_detection import (
     ObjectDetectProcess,
@@ -60,7 +61,7 @@ def start(id, num_detections, detection_queue, event):
     object_detector.cleanup()
     print(f"{id} - Processed for {duration:.2f} seconds.")
     print(f"{id} - FPS: {object_detector.fps.eps():.2f}")
-    print(f"{id} - Average frame processing time: {mean(frame_times)*1000:.2f}ms")
+    print(f"{id} - Average frame processing time: {mean(frame_times) * 1000:.2f}ms")
 
 
 ######
@@ -90,7 +91,7 @@ edgetpu_process_2 = ObjectDetectProcess(
 )
 
 for x in range(0, 10):
-    camera_process = mp.Process(
+    camera_process = util.Process(
         target=start, args=(x, 300, detection_queue, events[str(x)])
     )
     camera_process.daemon = True

cspell.json

@@ -7,7 +7,8 @@
     "*.db",
     "node_modules",
     "__pycache__",
-    "dist"
+    "dist",
+    "/audio-labelmap.txt"
   ],
   "language": "en",
   "dictionaryDefinitions": [

docker-compose.yml

@@ -23,7 +23,7 @@ services:
     #                     count: 1
     #                     capabilities: [gpu]
     environment:
-      YOLO_MODELS: yolov7-320
+      YOLO_MODELS: ""
     devices:
       - /dev/bus/usb:/dev/bus/usb
       # - /dev/dri:/dev/dri # for intel hwaccel, needs to be updated for your hardware

docker/hailo8l/user_installation.sh

@@ -0,0 +1,49 @@
+#!/bin/bash
+
+# Update package list and install dependencies
+sudo apt-get update
+sudo apt-get install -y build-essential cmake git wget
+
+hailo_version="4.20.0"
+arch=$(uname -m)
+
+if [[ $arch == "x86_64" ]]; then
+    sudo apt install -y linux-headers-$(uname -r);
+else
+    sudo apt install -y linux-modules-extra-$(uname -r);
+fi
+
+# Clone the HailoRT driver repository
+git clone --depth 1 --branch v${hailo_version} https://github.com/hailo-ai/hailort-drivers.git
+
+# Build and install the HailoRT driver
+cd hailort-drivers/linux/pcie
+sudo make all
+sudo make install
+
+# Load the Hailo PCI driver
+sudo modprobe hailo_pci
+
+if [ $? -ne 0 ]; then
+  echo "Unable to load hailo_pci module, common reasons for this are:"
+  echo "- Key was rejected by service: Secure Boot is enabling disallowing install."
+  echo "- Permissions are not setup correctly."
+  exit 1
+fi
+
+# Download and install the firmware
+cd ../../
+./download_firmware.sh
+
+# verify the firmware folder is present
+if [ ! -d /lib/firmware/hailo ]; then
+  sudo mkdir /lib/firmware/hailo
+fi
+sudo mv hailo8_fw.*.bin /lib/firmware/hailo/hailo8_fw.bin
+
+# Install udev rules
+sudo cp ./linux/pcie/51-hailo-udev.rules /etc/udev/rules.d/
+sudo udevadm control --reload-rules && sudo udevadm trigger
+
+echo "HailoRT driver installation complete."
+echo "reboot your system to load the firmware!"

docker/main/Dockerfile

@@ -3,14 +3,29 @@
 # https://askubuntu.com/questions/972516/debian-frontend-environment-variable
 ARG DEBIAN_FRONTEND=noninteractive
 
-ARG BASE_IMAGE=debian:11
-ARG SLIM_BASE=debian:11-slim
+# Globally set pip break-system-packages option to avoid having to specify it every time
+ARG PIP_BREAK_SYSTEM_PACKAGES=1
+
+ARG BASE_IMAGE=debian:12
+ARG SLIM_BASE=debian:12-slim
+
+# A hook that allows us to inject commands right after the base images
+ARG BASE_HOOK=
 
 FROM ${BASE_IMAGE} AS base
+ARG PIP_BREAK_SYSTEM_PACKAGES
+ARG BASE_HOOK
 
-FROM --platform=${BUILDPLATFORM} debian:11 AS base_host
+RUN sh -c "$BASE_HOOK"
+
+FROM --platform=${BUILDPLATFORM} debian:12 AS base_host
+ARG PIP_BREAK_SYSTEM_PACKAGES
 
 FROM ${SLIM_BASE} AS slim-base
+ARG PIP_BREAK_SYSTEM_PACKAGES
+ARG BASE_HOOK
+
+RUN sh -c "$BASE_HOOK"
 
 FROM slim-base AS wget
 ARG DEBIAN_FRONTEND
@@ -24,12 +39,19 @@ ARG DEBIAN_FRONTEND
 ENV CCACHE_DIR /root/.ccache
 ENV CCACHE_MAXSIZE 2G
 
-# bind /var/cache/apt to tmpfs to speed up nginx build
-RUN --mount=type=tmpfs,target=/tmp --mount=type=tmpfs,target=/var/cache/apt \
-    --mount=type=bind,source=docker/main/build_nginx.sh,target=/deps/build_nginx.sh \
-    --mount=type=cache,target=/root/.ccache \
+RUN --mount=type=bind,source=docker/main/build_nginx.sh,target=/deps/build_nginx.sh \
     /deps/build_nginx.sh
 
+FROM wget AS sqlite-vec
+ARG DEBIAN_FRONTEND
+
+# Build sqlite_vec from source
+COPY docker/main/build_sqlite_vec.sh /deps/build_sqlite_vec.sh
+RUN --mount=type=tmpfs,target=/tmp --mount=type=tmpfs,target=/var/cache/apt \
+    --mount=type=bind,source=docker/main/build_sqlite_vec.sh,target=/deps/build_sqlite_vec.sh \
+    --mount=type=cache,target=/root/.ccache \
+    /deps/build_sqlite_vec.sh
+
 FROM scratch AS go2rtc
 ARG TARGETARCH
 WORKDIR /rootfs/usr/local/go2rtc/bin
@@ -129,31 +151,25 @@ ARG TARGETARCH
 # Use a separate container to build wheels to prevent build dependencies in final image
 RUN apt-get -qq update \
     && apt-get -qq install -y \
-    apt-transport-https \
-    gnupg \
-    wget \
-    # the key fingerprint can be obtained from https://ftp-master.debian.org/keys.html
-    && wget -qO- "https://keyserver.ubuntu.com/pks/lookup?op=get&search=0xA4285295FC7B1A81600062A9605C66F00D6C9793" | \
-    gpg --dearmor > /usr/share/keyrings/debian-archive-bullseye-stable.gpg \
-    && echo "deb [signed-by=/usr/share/keyrings/debian-archive-bullseye-stable.gpg] http://deb.debian.org/debian bullseye main contrib non-free" | \
-    tee /etc/apt/sources.list.d/debian-bullseye-nonfree.list \
+    apt-transport-https wget \
     && apt-get -qq update \
     && apt-get -qq install -y \
-    python3.9 \
-    python3.9-dev \
+    python3.11 \
+    python3.11-dev \
     # opencv dependencies
     build-essential cmake git pkg-config libgtk-3-dev \
     libavcodec-dev libavformat-dev libswscale-dev libv4l-dev \
     libxvidcore-dev libx264-dev libjpeg-dev libpng-dev libtiff-dev \
     gfortran openexr libatlas-base-dev libssl-dev\
-    libtbb2 libtbb-dev libdc1394-22-dev libopenexr-dev \
+    libtbbmalloc2 libtbb-dev libdc1394-dev libopenexr-dev \
     libgstreamer-plugins-base1.0-dev libgstreamer1.0-dev \
+    # sqlite3 dependencies
+    tclsh \
     # scipy dependencies
     gcc gfortran libopenblas-dev liblapack-dev && \
     rm -rf /var/lib/apt/lists/*
 
-# Ensure python3 defaults to python3.9
-RUN update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.9 1
+RUN update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.11 1
 
 RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
     && python3 get-pip.py "pip"
@@ -161,18 +177,27 @@ RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
 COPY docker/main/requirements.txt /requirements.txt
 RUN pip3 install -r /requirements.txt
 
+# Build pysqlite3 from source
+COPY docker/main/build_pysqlite3.sh /build_pysqlite3.sh
+RUN /build_pysqlite3.sh
+
 COPY docker/main/requirements-wheels.txt /requirements-wheels.txt
 RUN pip3 wheel --wheel-dir=/wheels -r /requirements-wheels.txt
 
+# Install HailoRT & Wheels
+RUN --mount=type=bind,source=docker/main/install_hailort.sh,target=/deps/install_hailort.sh \
+    /deps/install_hailort.sh
 
 # Collect deps in a single layer
 FROM scratch AS deps-rootfs
 COPY --from=nginx /usr/local/nginx/ /usr/local/nginx/
+COPY --from=sqlite-vec /usr/local/lib/ /usr/local/lib/
 COPY --from=go2rtc /rootfs/ /
 COPY --from=libusb-build /usr/local/lib /usr/local/lib
 COPY --from=tempio /rootfs/ /
 COPY --from=s6-overlay /rootfs/ /
 COPY --from=models /rootfs/ /
+COPY --from=wheels /rootfs/ /
 COPY docker/main/rootfs/ /
 
 
@@ -188,14 +213,31 @@ ARG APT_KEY_DONT_WARN_ON_DANGEROUS_USAGE=DontWarn
 ENV NVIDIA_VISIBLE_DEVICES=all
 ENV NVIDIA_DRIVER_CAPABILITIES="compute,video,utility"
 
-ENV PATH="/usr/lib/btbn-ffmpeg/bin:/usr/local/go2rtc/bin:/usr/local/tempio/bin:/usr/local/nginx/sbin:${PATH}"
+# Disable tokenizer parallelism warning
+# https://stackoverflow.com/questions/62691279/how-to-disable-tokenizers-parallelism-true-false-warning/72926996#72926996
+ENV TOKENIZERS_PARALLELISM=true
+# https://github.com/huggingface/transformers/issues/27214
+ENV TRANSFORMERS_NO_ADVISORY_WARNINGS=1
+
+# Set OpenCV ffmpeg loglevel to fatal: https://ffmpeg.org/doxygen/trunk/log_8h.html
+ENV OPENCV_FFMPEG_LOGLEVEL=8
+
+# Set HailoRT to disable logging
+ENV HAILORT_LOGGER_PATH=NONE
+
+ENV PATH="/usr/local/go2rtc/bin:/usr/local/tempio/bin:/usr/local/nginx/sbin:${PATH}"
 
 # Install dependencies
 RUN --mount=type=bind,source=docker/main/install_deps.sh,target=/deps/install_deps.sh \
     /deps/install_deps.sh
 
+ENV DEFAULT_FFMPEG_VERSION="7.0"
+ENV INCLUDED_FFMPEG_VERSIONS="${DEFAULT_FFMPEG_VERSION}:5.0"
+
+RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
+    && python3 get-pip.py "pip"
+
 RUN --mount=type=bind,from=wheels,source=/wheels,target=/deps/wheels \
-    python3 -m pip install --upgrade pip && \
     pip3 install -U /deps/wheels/*.whl
 
 COPY --from=deps-rootfs / /
@@ -214,7 +256,7 @@ ENV S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0
 ENTRYPOINT ["/init"]
 CMD []
 
-HEALTHCHECK --start-period=120s --start-interval=5s --interval=15s --timeout=5s --retries=3 \
+HEALTHCHECK --start-period=300s --start-interval=5s --interval=15s --timeout=5s --retries=3 \
     CMD curl --fail --silent --show-error http://127.0.0.1:5000/api/version || exit 1
 
 # Frigate deps with Node.js and NPM for devcontainer

docker/main/build_nginx.sh

@@ -8,10 +8,16 @@ SECURE_TOKEN_MODULE_VERSION="1.5"
 SET_MISC_MODULE_VERSION="v0.33"
 NGX_DEVEL_KIT_VERSION="v0.3.3"
 
-cp /etc/apt/sources.list /etc/apt/sources.list.d/sources-src.list
-sed -i 's|deb http|deb-src http|g' /etc/apt/sources.list.d/sources-src.list
-apt-get update
+source /etc/os-release
 
+if [[ "$VERSION_ID" == "12" ]]; then
+    sed -i '/^Types:/s/deb/& deb-src/' /etc/apt/sources.list.d/debian.sources
+else
+    cp /etc/apt/sources.list /etc/apt/sources.list.d/sources-src.list
+    sed -i 's|deb http|deb-src http|g' /etc/apt/sources.list.d/sources-src.list
+fi
+
+apt-get update
 apt-get -yqq build-dep nginx
 
 apt-get -yqq install --no-install-recommends ca-certificates wget

docker/main/build_ov_model.py

@@ -4,7 +4,7 @@ from openvino.tools import mo
 ov_model = mo.convert_model(
     "/models/ssdlite_mobilenet_v2_coco_2018_05_09/frozen_inference_graph.pb",
     compress_to_fp16=True,
-    transformations_config="/usr/local/lib/python3.9/dist-packages/openvino/tools/mo/front/tf/ssd_v2_support.json",
+    transformations_config="/usr/local/lib/python3.11/dist-packages/openvino/tools/mo/front/tf/ssd_v2_support.json",
     tensorflow_object_detection_api_pipeline_config="/models/ssdlite_mobilenet_v2_coco_2018_05_09/pipeline.config",
     reverse_input_channels=True,
 )

docker/main/build_pysqlite3.sh

@@ -0,0 +1,35 @@
+#!/bin/bash
+
+set -euxo pipefail
+
+SQLITE3_VERSION="96c92aba00c8375bc32fafcdf12429c58bd8aabfcadab6683e35bbb9cdebf19e" # 3.46.0
+PYSQLITE3_VERSION="0.5.3"
+
+# Fetch the source code for the latest release of Sqlite.
+if [[ ! -d "sqlite" ]]; then
+  wget https://www.sqlite.org/src/tarball/sqlite.tar.gz?r=${SQLITE3_VERSION} -O sqlite.tar.gz
+  tar xzf sqlite.tar.gz
+  cd sqlite/
+  LIBS="-lm" ./configure --disable-tcl --enable-tempstore=always
+  make sqlite3.c
+  cd ../
+  rm sqlite.tar.gz
+fi
+
+# Grab the pysqlite3 source code.
+if [[ ! -d "./pysqlite3" ]]; then
+  git clone https://github.com/coleifer/pysqlite3.git
+fi
+
+cd pysqlite3/
+git checkout ${PYSQLITE3_VERSION}
+
+# Copy the sqlite3 source amalgamation into the pysqlite3 directory so we can
+# create a self-contained extension module.
+cp "../sqlite/sqlite3.c" ./
+cp "../sqlite/sqlite3.h" ./
+
+# Create the wheel and put it in the /wheels dir.
+sed -i "s|name='pysqlite3-binary'|name=PACKAGE_NAME|g" setup.py
+python3 setup.py build_static
+pip3 wheel . -w /wheels

docker/main/build_sqlite_vec.sh

@@ -0,0 +1,38 @@
+#!/bin/bash
+
+set -euxo pipefail
+
+SQLITE_VEC_VERSION="0.1.3"
+
+source /etc/os-release
+
+if [[ "$VERSION_ID" == "12" ]]; then
+    sed -i '/^Types:/s/deb/& deb-src/' /etc/apt/sources.list.d/debian.sources
+else
+    cp /etc/apt/sources.list /etc/apt/sources.list.d/sources-src.list
+    sed -i 's|deb http|deb-src http|g' /etc/apt/sources.list.d/sources-src.list
+fi
+
+apt-get update
+apt-get -yqq build-dep sqlite3 gettext git
+
+mkdir /tmp/sqlite_vec
+# Grab the sqlite_vec source code.
+wget -nv https://github.com/asg017/sqlite-vec/archive/refs/tags/v${SQLITE_VEC_VERSION}.tar.gz
+tar -zxf v${SQLITE_VEC_VERSION}.tar.gz -C /tmp/sqlite_vec
+
+cd /tmp/sqlite_vec/sqlite-vec-${SQLITE_VEC_VERSION}
+
+mkdir -p vendor
+wget -O sqlite-amalgamation.zip https://www.sqlite.org/2024/sqlite-amalgamation-3450300.zip
+unzip sqlite-amalgamation.zip
+mv sqlite-amalgamation-3450300/* vendor/
+rmdir sqlite-amalgamation-3450300
+rm sqlite-amalgamation.zip
+
+# build loadable module
+make loadable
+
+# install it
+cp dist/vec0.* /usr/local/lib
+

docker/main/install_deps.sh

@@ -6,72 +6,87 @@ apt-get -qq update
 
 apt-get -qq install --no-install-recommends -y \
     apt-transport-https \
+    ca-certificates \
     gnupg \
     wget \
+    lbzip2 \
     procps vainfo \
     unzip locales tzdata libxml2 xz-utils \
-    python3.9 \
-    python3-pip \
+    python3.11 \
     curl \
+    lsof \
     jq \
-    nethogs
+    nethogs \
+    libgl1 \
+    libglib2.0-0 \
+    libusb-1.0.0
 
-# ensure python3 defaults to python3.9
-update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.9 1
+update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.11 1
 
 mkdir -p -m 600 /root/.gnupg
 
-# add coral repo
-curl -fsSLo - https://packages.cloud.google.com/apt/doc/apt-key.gpg | \
-    gpg --dearmor -o /etc/apt/trusted.gpg.d/google-cloud-packages-archive-keyring.gpg
-echo "deb https://packages.cloud.google.com/apt coral-edgetpu-stable main" | tee /etc/apt/sources.list.d/coral-edgetpu.list
-echo "libedgetpu1-max libedgetpu/accepted-eula select true" | debconf-set-selections
+# install coral runtime
+wget -q -O /tmp/libedgetpu1-max.deb "https://github.com/feranick/libedgetpu/releases/download/16.0TF2.17.1-1/libedgetpu1-max_16.0tf2.17.1-1.bookworm_${TARGETARCH}.deb"
+unset DEBIAN_FRONTEND
+yes | dpkg -i /tmp/libedgetpu1-max.deb && export DEBIAN_FRONTEND=noninteractive
+rm /tmp/libedgetpu1-max.deb
 
-# enable non-free repo in Debian
-if grep -q "Debian" /etc/issue; then
-    sed -i -e's/ main/ main contrib non-free/g' /etc/apt/sources.list
-fi
-
-# coral drivers
-apt-get -qq update
-apt-get -qq install --no-install-recommends --no-install-suggests -y \
-    libedgetpu1-max python3-tflite-runtime python3-pycoral
-
-# btbn-ffmpeg -> amd64
+# ffmpeg -> amd64
 if [[ "${TARGETARCH}" == "amd64" ]]; then
-    mkdir -p /usr/lib/btbn-ffmpeg
-    wget -qO btbn-ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linux64-gpl-5.1.tar.xz"
-    tar -xf btbn-ffmpeg.tar.xz -C /usr/lib/btbn-ffmpeg --strip-components 1
-    rm -rf btbn-ffmpeg.tar.xz /usr/lib/btbn-ffmpeg/doc /usr/lib/btbn-ffmpeg/bin/ffplay
+    mkdir -p /usr/lib/ffmpeg/5.0
+    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linux64-gpl-5.1.tar.xz"
+    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/5.0 --strip-components 1 amd64/bin/ffmpeg amd64/bin/ffprobe
+    rm -rf ffmpeg.tar.xz
+    mkdir -p /usr/lib/ffmpeg/7.0
+    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2024-09-19-12-51/ffmpeg-n7.0.2-18-g3e6cec1286-linux64-gpl-7.0.tar.xz"
+    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/7.0 --strip-components 1 amd64/bin/ffmpeg amd64/bin/ffprobe
+    rm -rf ffmpeg.tar.xz
 fi
 
 # ffmpeg -> arm64
 if [[ "${TARGETARCH}" == "arm64" ]]; then
-    mkdir -p /usr/lib/btbn-ffmpeg
-    wget -qO btbn-ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linuxarm64-gpl-5.1.tar.xz"
-    tar -xf btbn-ffmpeg.tar.xz -C /usr/lib/btbn-ffmpeg --strip-components 1
-    rm -rf btbn-ffmpeg.tar.xz /usr/lib/btbn-ffmpeg/doc /usr/lib/btbn-ffmpeg/bin/ffplay
+    mkdir -p /usr/lib/ffmpeg/5.0
+    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2022-07-31-12-37/ffmpeg-n5.1-2-g915ef932a3-linuxarm64-gpl-5.1.tar.xz"
+    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/5.0 --strip-components 1 arm64/bin/ffmpeg arm64/bin/ffprobe
+    rm -f ffmpeg.tar.xz
+    mkdir -p /usr/lib/ffmpeg/7.0
+    wget -qO ffmpeg.tar.xz "https://github.com/NickM-27/FFmpeg-Builds/releases/download/autobuild-2024-09-19-12-51/ffmpeg-n7.0.2-18-g3e6cec1286-linuxarm64-gpl-7.0.tar.xz"
+    tar -xf ffmpeg.tar.xz -C /usr/lib/ffmpeg/7.0 --strip-components 1 arm64/bin/ffmpeg arm64/bin/ffprobe
+    rm -f ffmpeg.tar.xz
 fi
 
 # arch specific packages
 if [[ "${TARGETARCH}" == "amd64" ]]; then
-    # use debian bookworm for hwaccel packages
-    echo 'deb https://deb.debian.org/debian bookworm main contrib non-free' >/etc/apt/sources.list.d/debian-bookworm.list
+    # install amd / intel-i965 driver packages
+    apt-get -qq install --no-install-recommends --no-install-suggests -y \
+        i965-va-driver intel-gpu-tools onevpl-tools \
+        libva-drm2 \
+        mesa-va-drivers radeontop
+
+    # intel packages use zst compression so we need to update dpkg
+    apt-get install -y dpkg
+
+    # use intel apt intel packages
+    wget -qO - https://repositories.intel.com/gpu/intel-graphics.key | gpg --yes --dearmor --output /usr/share/keyrings/intel-graphics.gpg
+    echo "deb [arch=amd64 signed-by=/usr/share/keyrings/intel-graphics.gpg] https://repositories.intel.com/gpu/ubuntu jammy client" | tee /etc/apt/sources.list.d/intel-gpu-jammy.list
     apt-get -qq update
     apt-get -qq install --no-install-recommends --no-install-suggests -y \
-        intel-opencl-icd \
-        mesa-va-drivers radeontop libva-drm2 intel-media-va-driver-non-free i965-va-driver libmfx1 intel-gpu-tools
-    # something about this dependency requires it to be installed in a separate call rather than in the line above
-    apt-get -qq install --no-install-recommends --no-install-suggests -y \
-        i965-va-driver-shaders
-    rm -f /etc/apt/sources.list.d/debian-bookworm.list
+        intel-opencl-icd=24.35.30872.31-996~22.04 intel-level-zero-gpu=1.3.29735.27-914~22.04 intel-media-va-driver-non-free=24.3.3-996~22.04 \
+        libmfx1=23.2.2-880~22.04 libmfxgen1=24.2.4-914~22.04 libvpl2=1:2.13.0.0-996~22.04
+
+    rm -f /usr/share/keyrings/intel-graphics.gpg
+    rm -f /etc/apt/sources.list.d/intel-gpu-jammy.list
 fi
 
 if [[ "${TARGETARCH}" == "arm64" ]]; then
     apt-get -qq install --no-install-recommends --no-install-suggests -y \
-        libva-drm2 mesa-va-drivers
+        libva-drm2 mesa-va-drivers radeontop
 fi
 
+# install vulkan
+apt-get -qq install --no-install-recommends --no-install-suggests -y \
+    libvulkan1 mesa-vulkan-drivers
+
 apt-get purge gnupg apt-transport-https xz-utils -y
 apt-get clean autoclean -y
 apt-get autoremove --purge -y

docker/main/install_hailort.sh

@@ -0,0 +1,14 @@
+#!/bin/bash
+
+set -euxo pipefail
+
+hailo_version="4.20.0"
+
+if [[ "${TARGETARCH}" == "amd64" ]]; then
+    arch="x86_64"
+elif [[ "${TARGETARCH}" == "arm64" ]]; then
+    arch="aarch64"
+fi
+
+wget -qO- "https://github.com/frigate-nvr/hailort/releases/download/v${hailo_version}/hailort-${TARGETARCH}.tar.gz" | tar -C / -xzf -
+wget -P /wheels/ "https://github.com/frigate-nvr/hailort/releases/download/v${hailo_version}/hailort-${hailo_version}-cp311-cp311-linux_${arch}.whl"

docker/main/requirements-wheels.txt

@@ -1,32 +1,73 @@
+aiofiles == 24.1.*
 click == 8.1.*
-Flask == 3.0.*
-Flask_Limiter == 3.7.*
+# FastAPI
+aiohttp == 3.11.3
+starlette == 0.41.2
+starlette-context == 0.3.6
+fastapi == 0.115.*
+uvicorn == 0.30.*
+slowapi == 0.1.*
 imutils == 0.5.*
-joserfc == 0.11.*
-markupsafe == 2.1.*
+joserfc == 1.0.*
+pathvalidate == 3.2.*
+markupsafe == 3.0.*
+python-multipart == 0.0.20
+# General
 mypy == 1.6.1
-numpy == 1.26.*
-onvif_zeep == 0.2.12
-opencv-python-headless == 4.9.0.*
+onvif-zeep-async == 3.1.*
 paho-mqtt == 2.1.*
 pandas == 2.2.*
 peewee == 3.17.*
-peewee_migrate == 1.12.*
-psutil == 5.9.*
-pydantic == 2.7.*
+peewee_migrate == 1.13.*
+psutil == 6.1.*
+pydantic == 2.10.*
 git+https://github.com/fbcotter/py3nvml#egg=py3nvml
-PyYAML == 6.0.*
-pytz == 2024.1
-pyzmq == 26.0.*
+pytz == 2025.*
+pyzmq == 26.2.*
 ruamel.yaml == 0.18.*
 tzlocal == 5.2
-types-PyYAML == 6.0.*
 requests == 2.32.*
 types-requests == 2.32.*
-scipy == 1.13.*
 norfair == 2.2.*
 setproctitle == 1.3.*
 ws4py == 0.5.*
 unidecode == 1.3.*
-onnxruntime == 1.18.*
-openvino == 2024.1.*
+# Image Manipulation
+numpy == 1.26.*
+opencv-python-headless == 4.11.0.*
+opencv-contrib-python == 4.11.0.*
+scipy == 1.14.*
+# OpenVino & ONNX
+openvino == 2024.4.*
+onnxruntime-openvino == 1.20.* ; platform_machine == 'x86_64'
+onnxruntime == 1.20.* ; platform_machine == 'aarch64'
+# Embeddings
+transformers == 4.45.*
+# Generative AI
+google-generativeai == 0.8.*
+ollama == 0.3.*
+openai == 1.65.*
+# push notifications
+py-vapid == 1.9.*
+pywebpush == 2.0.*
+# alpr
+pyclipper == 1.3.*
+shapely == 2.0.*
+Levenshtein==0.26.*
+# HailoRT Wheels
+appdirs==1.4.*
+argcomplete==2.0.*
+contextlib2==0.6.*
+distlib==0.3.*
+filelock==3.8.*
+future==0.18.*
+importlib-metadata==5.1.*
+importlib-resources==5.1.*
+netaddr==0.8.*
+netifaces==0.10.*
+verboselogs==1.7.*
+virtualenv==20.17.*
+prometheus-client == 0.21.*
+# TFLite
+tflite_runtime @ https://github.com/frigate-nvr/TFlite-builds/releases/download/v2.17.1/tflite_runtime-2.17.1-cp311-cp311-linux_x86_64.whl; platform_machine == 'x86_64'
+tflite_runtime @ https://github.com/feranick/TFlite-builds/releases/download/v2.17.1/tflite_runtime-2.17.1-cp311-cp311-linux_aarch64.whl; platform_machine == 'aarch64'

docker/main/requirements.txt

@@ -1,2 +1,2 @@
-scikit-build == 0.17.*
+scikit-build == 0.18.*
 nvidia-pyindex

docker/main/rootfs/etc/s6-overlay/s6-rc.d/frigate/run

@@ -42,10 +42,16 @@ function migrate_db_path() {
     fi
 }
 
+function set_libva_version() {
+    local ffmpeg_path
+    ffmpeg_path=$(python3 /usr/local/ffmpeg/get_ffmpeg_path.py)
+    LIBAVFORMAT_VERSION_MAJOR=$("$ffmpeg_path" -version | grep -Po "libavformat\W+\K\d+")
+    export LIBAVFORMAT_VERSION_MAJOR
+}
+
 echo "[INFO] Preparing Frigate..."
 migrate_db_path
-export LIBAVFORMAT_VERSION_MAJOR=$(ffmpeg -version | grep -Po 'libavformat\W+\K\d+')
-
+set_libva_version
 echo "[INFO] Starting Frigate..."
 
 cd /opt/frigate || echo "[ERROR] Failed to change working directory to /opt/frigate"

docker/main/rootfs/etc/s6-overlay/s6-rc.d/go2rtc/run

@@ -43,7 +43,14 @@ function get_ip_and_port_from_supervisor() {
     export FRIGATE_GO2RTC_WEBRTC_CANDIDATE_INTERNAL="${ip_address}:${webrtc_port}"
 }
 
-export LIBAVFORMAT_VERSION_MAJOR=$(ffmpeg -version | grep -Po 'libavformat\W+\K\d+')
+function set_libva_version() {
+    local ffmpeg_path
+    ffmpeg_path=$(python3 /usr/local/ffmpeg/get_ffmpeg_path.py)
+    LIBAVFORMAT_VERSION_MAJOR=$("$ffmpeg_path" -version | grep -Po "libavformat\W+\K\d+")
+    export LIBAVFORMAT_VERSION_MAJOR
+}
+
+set_libva_version
 
 if [[ -f "/dev/shm/go2rtc.yaml" ]]; then
     echo "[INFO] Removing stale config from last run..."

docker/main/rootfs/etc/s6-overlay/s6-rc.d/nginx/run

@@ -38,7 +38,7 @@ function get_cpus() {
     fi
 
     local cpus
-    if [ -n "${quota}" ] && [ -n "${period}" ]; then
+    if [ "${period}" != "0" ] && [ -n "${quota}" ] && [ -n "${period}" ]; then
         cpus=$((quota / period))
         if [ "$cpus" -eq 0 ]; then
             cpus=1

docker/main/rootfs/usr/local/ffmpeg/get_ffmpeg_path.py

@@ -0,0 +1,41 @@
+import json
+import os
+import sys
+
+from ruamel.yaml import YAML
+
+sys.path.insert(0, "/opt/frigate")
+from frigate.const import (
+    DEFAULT_FFMPEG_VERSION,
+    INCLUDED_FFMPEG_VERSIONS,
+)
+
+sys.path.remove("/opt/frigate")
+
+yaml = YAML()
+
+config_file = os.environ.get("CONFIG_FILE", "/config/config.yml")
+
+# Check if we can use .yaml instead of .yml
+config_file_yaml = config_file.replace(".yml", ".yaml")
+if os.path.isfile(config_file_yaml):
+    config_file = config_file_yaml
+
+try:
+    with open(config_file) as f:
+        raw_config = f.read()
+
+    if config_file.endswith((".yaml", ".yml")):
+        config: dict[str, any] = yaml.load(raw_config)
+    elif config_file.endswith(".json"):
+        config: dict[str, any] = json.loads(raw_config)
+except FileNotFoundError:
+    config: dict[str, any] = {}
+
+path = config.get("ffmpeg", {}).get("path", "default")
+if path == "default":
+    print(f"/usr/lib/ffmpeg/{DEFAULT_FFMPEG_VERSION}/bin/ffmpeg")
+elif path in INCLUDED_FFMPEG_VERSIONS:
+    print(f"/usr/lib/ffmpeg/{path}/bin/ffmpeg")
+else:
+    print(f"{path}/bin/ffmpeg")

docker/main/rootfs/usr/local/go2rtc/create_config.py

@@ -5,16 +5,20 @@ import os
 import sys
 from pathlib import Path
 
-import yaml
+from ruamel.yaml import YAML
 
 sys.path.insert(0, "/opt/frigate")
-from frigate.const import BIRDSEYE_PIPE  # noqa: E402
-from frigate.ffmpeg_presets import (  # noqa: E402
-    parse_preset_hardware_acceleration_encode,
+from frigate.const import (
+    BIRDSEYE_PIPE,
+    DEFAULT_FFMPEG_VERSION,
+    INCLUDED_FFMPEG_VERSIONS,
+    LIBAVFORMAT_VERSION_MAJOR,
 )
+from frigate.ffmpeg_presets import parse_preset_hardware_acceleration_encode
 
 sys.path.remove("/opt/frigate")
 
+yaml = YAML()
 
 FRIGATE_ENV_VARS = {k: v for k, v in os.environ.items() if k.startswith("FRIGATE_")}
 # read docker secret files as env vars too
@@ -37,7 +41,7 @@ try:
         raw_config = f.read()
 
     if config_file.endswith((".yaml", ".yml")):
-        config: dict[str, any] = yaml.safe_load(raw_config)
+        config: dict[str, any] = yaml.load(raw_config)
     elif config_file.endswith(".json"):
         config: dict[str, any] = json.loads(raw_config)
 except FileNotFoundError:
@@ -62,29 +66,32 @@ elif go2rtc_config["log"].get("format") is None:
     go2rtc_config["log"]["format"] = "text"
 
 # ensure there is a default webrtc config
-if not go2rtc_config.get("webrtc"):
+if go2rtc_config.get("webrtc") is None:
     go2rtc_config["webrtc"] = {}
 
 # go2rtc should listen on 8555 tcp & udp by default
-if not go2rtc_config["webrtc"].get("listen"):
+if go2rtc_config["webrtc"].get("listen") is None:
     go2rtc_config["webrtc"]["listen"] = ":8555"
 
-if not go2rtc_config["webrtc"].get("candidates", []):
+if go2rtc_config["webrtc"].get("candidates") is None:
     default_candidates = []
     # use internal candidate if it was discovered when running through the add-on
-    internal_candidate = os.environ.get(
-        "FRIGATE_GO2RTC_WEBRTC_CANDIDATE_INTERNAL", None
-    )
+    internal_candidate = os.environ.get("FRIGATE_GO2RTC_WEBRTC_CANDIDATE_INTERNAL")
     if internal_candidate is not None:
         default_candidates.append(internal_candidate)
     # should set default stun server so webrtc can work
     default_candidates.append("stun:8555")
 
-    go2rtc_config["webrtc"] = {"candidates": default_candidates}
-else:
-    print(
-        "[INFO] Not injecting WebRTC candidates into go2rtc config as it has been set manually",
-    )
+    go2rtc_config["webrtc"]["candidates"] = default_candidates
+
+# This prevents WebRTC from attempting to establish a connection to the internal
+# docker IPs which are not accessible from outside the container itself and just
+# wastes time during negotiation. Note that this is only necessary because
+# Frigate container doesn't run in host network mode.
+if go2rtc_config["webrtc"].get("filter") is None:
+    go2rtc_config["webrtc"]["filter"] = {"candidates": []}
+elif go2rtc_config["webrtc"]["filter"].get("candidates") is None:
+    go2rtc_config["webrtc"]["filter"]["candidates"] = []
 
 # sets default RTSP response to be equivalent to ?video=h264,h265&audio=aac
 # this means user does not need to specify audio codec when using restream
@@ -105,16 +112,27 @@ else:
             **FRIGATE_ENV_VARS
         )
 
+# ensure ffmpeg path is set correctly
+path = config.get("ffmpeg", {}).get("path", "default")
+if path == "default":
+    ffmpeg_path = f"/usr/lib/ffmpeg/{DEFAULT_FFMPEG_VERSION}/bin/ffmpeg"
+elif path in INCLUDED_FFMPEG_VERSIONS:
+    ffmpeg_path = f"/usr/lib/ffmpeg/{path}/bin/ffmpeg"
+else:
+    ffmpeg_path = f"{path}/bin/ffmpeg"
+
+if go2rtc_config.get("ffmpeg") is None:
+    go2rtc_config["ffmpeg"] = {"bin": ffmpeg_path}
+elif go2rtc_config["ffmpeg"].get("bin") is None:
+    go2rtc_config["ffmpeg"]["bin"] = ffmpeg_path
+
 # need to replace ffmpeg command when using ffmpeg4
-if int(os.environ["LIBAVFORMAT_VERSION_MAJOR"]) < 59:
+if LIBAVFORMAT_VERSION_MAJOR < 59:
+    rtsp_args = "-fflags nobuffer -flags low_delay -stimeout 5000000 -user_agent go2rtc/ffmpeg -rtsp_transport tcp -i {input}"
     if go2rtc_config.get("ffmpeg") is None:
-        go2rtc_config["ffmpeg"] = {
-            "rtsp": "-fflags nobuffer -flags low_delay -stimeout 5000000 -user_agent go2rtc/ffmpeg -rtsp_transport tcp -i {input}"
-        }
+        go2rtc_config["ffmpeg"] = {"rtsp": rtsp_args}
     elif go2rtc_config["ffmpeg"].get("rtsp") is None:
-        go2rtc_config["ffmpeg"]["rtsp"] = (
-            "-fflags nobuffer -flags low_delay -stimeout 5000000 -user_agent go2rtc/ffmpeg -rtsp_transport tcp -i {input}"
-        )
+        go2rtc_config["ffmpeg"]["rtsp"] = rtsp_args
 
 for name in go2rtc_config.get("streams", {}):
     stream = go2rtc_config["streams"][name]
@@ -145,7 +163,7 @@ if config.get("birdseye", {}).get("restream", False):
     birdseye: dict[str, any] = config.get("birdseye")
 
     input = f"-f rawvideo -pix_fmt yuv420p -video_size {birdseye.get('width', 1280)}x{birdseye.get('height', 720)} -r 10 -i {BIRDSEYE_PIPE}"
-    ffmpeg_cmd = f"exec:{parse_preset_hardware_acceleration_encode(config.get('ffmpeg', {}).get('hwaccel_args'), input, '-rtsp_transport tcp -f rtsp {output}')}"
+    ffmpeg_cmd = f"exec:{parse_preset_hardware_acceleration_encode(ffmpeg_path, config.get('ffmpeg', {}).get('hwaccel_args', ''), input, '-rtsp_transport tcp -f rtsp {output}')}"
 
     if go2rtc_config.get("streams"):
         go2rtc_config["streams"]["birdseye"] = ffmpeg_cmd

docker/main/rootfs/usr/local/nginx/conf/auth_request.conf

@@ -1,14 +1,16 @@
 ## Send a subrequest to verify if the user is authenticated and has permission to access the resource.
 auth_request /auth;
 
-## Save the upstream metadata response headers from Authelia to variables.
+## Save the upstream metadata response headers from the auth request to variables
 auth_request_set $user $upstream_http_remote_user;
+auth_request_set $role $upstream_http_remote_role;
 auth_request_set $groups $upstream_http_remote_groups;
 auth_request_set $name $upstream_http_remote_name;
 auth_request_set $email $upstream_http_remote_email;
 
 ## Inject the metadata response headers from the variables into the request made to the backend.
 proxy_set_header Remote-User $user;
+proxy_set_header Remote-Role $role;
 proxy_set_header Remote-Groups $groups;
 proxy_set_header Remote-Email $email;
 proxy_set_header Remote-Name $name;

docker/main/rootfs/usr/local/nginx/conf/nginx.conf

@@ -81,6 +81,9 @@ http {
         open_file_cache_errors on;
         aio on;
 
+        # file upload size
+        client_max_body_size 10M;
+
         # https://github.com/kaltura/nginx-vod-module#vod_open_file_thread_pool
         vod_open_file_thread_pool default;
 
@@ -104,6 +107,16 @@ http {
 
             add_header Cache-Control "no-store";
             expires off;
+
+            keepalive_disable safari;
+
+            # vod module returns 502 for non-existent media
+            # https://github.com/kaltura/nginx-vod-module/issues/468
+            error_page 502 =404 /vod-not-found;
+        }
+
+        location = /vod-not-found {
+            return 404;
         }
 
         location /stream/ {
@@ -224,7 +237,7 @@ http {
 
         location ~* /api/.*\.(jpg|jpeg|png|webp|gif)$ {
             include auth_request.conf;
-            rewrite ^/api/(.*)$ $1 break;
+            rewrite ^/api/(.*)$ /$1 break;
             proxy_pass http://frigate_api;
             include proxy.conf;
         }

docker/main/rootfs/usr/local/nginx/get_tls_settings.py

@@ -3,7 +3,9 @@
 import json
 import os
 
-import yaml
+from ruamel.yaml import YAML
+
+yaml = YAML()
 
 config_file = os.environ.get("CONFIG_FILE", "/config/config.yml")
 
@@ -17,7 +19,7 @@ try:
         raw_config = f.read()
 
     if config_file.endswith((".yaml", ".yml")):
-        config: dict[str, any] = yaml.safe_load(raw_config)
+        config: dict[str, any] = yaml.load(raw_config)
     elif config_file.endswith(".json"):
         config: dict[str, any] = json.loads(raw_config)
 except FileNotFoundError:

docker/rockchip/COCO/coco_subset_20.txt

@@ -0,0 +1,20 @@
+./subset/000000005001.jpg
+./subset/000000038829.jpg
+./subset/000000052891.jpg
+./subset/000000075612.jpg
+./subset/000000098261.jpg
+./subset/000000181542.jpg
+./subset/000000215245.jpg
+./subset/000000277005.jpg
+./subset/000000288685.jpg
+./subset/000000301421.jpg
+./subset/000000334371.jpg
+./subset/000000348481.jpg
+./subset/000000373353.jpg
+./subset/000000397681.jpg
+./subset/000000414673.jpg
+./subset/000000419312.jpg
+./subset/000000465822.jpg
+./subset/000000475732.jpg
+./subset/000000559707.jpg
+./subset/000000574315.jpg

docker/rockchip/Dockerfile

@@ -3,24 +3,32 @@
 # https://askubuntu.com/questions/972516/debian-frontend-environment-variable
 ARG DEBIAN_FRONTEND=noninteractive
 
+# Globally set pip break-system-packages option to avoid having to specify it every time
+ARG PIP_BREAK_SYSTEM_PACKAGES=1
+
 FROM wheels as rk-wheels
 COPY docker/main/requirements-wheels.txt /requirements-wheels.txt
 COPY docker/rockchip/requirements-wheels-rk.txt /requirements-wheels-rk.txt
 RUN sed -i "/https:\/\//d" /requirements-wheels.txt
+RUN sed -i "/onnxruntime/d" /requirements-wheels.txt
 RUN pip3 wheel --wheel-dir=/rk-wheels -c /requirements-wheels.txt -r /requirements-wheels-rk.txt
+RUN rm -rf /rk-wheels/opencv_python-*
 
 FROM deps AS rk-frigate
 ARG TARGETARCH
+ARG PIP_BREAK_SYSTEM_PACKAGES
 
 RUN --mount=type=bind,from=rk-wheels,source=/rk-wheels,target=/deps/rk-wheels \
-    pip3 install -U /deps/rk-wheels/*.whl
+    pip3 install --no-deps -U /deps/rk-wheels/*.whl
 
 WORKDIR /opt/frigate/
 COPY --from=rootfs / /
+COPY docker/rockchip/COCO /COCO
+COPY docker/rockchip/conv2rknn.py /opt/conv2rknn.py
 
-ADD https://github.com/MarcA711/rknn-toolkit2/releases/download/v2.0.0/librknnrt.so /usr/lib/
+ADD https://github.com/MarcA711/rknn-toolkit2/releases/download/v2.3.0/librknnrt.so /usr/lib/
 
-RUN rm -rf /usr/lib/btbn-ffmpeg/bin/ffmpeg
-RUN rm -rf /usr/lib/btbn-ffmpeg/bin/ffprobe
-ADD --chmod=111 https://github.com/MarcA711/Rockchip-FFmpeg-Builds/releases/download/6.1-5/ffmpeg /usr/lib/btbn-ffmpeg/bin/
-ADD --chmod=111 https://github.com/MarcA711/Rockchip-FFmpeg-Builds/releases/download/6.1-5/ffprobe /usr/lib/btbn-ffmpeg/bin/
+ADD --chmod=111 https://github.com/MarcA711/Rockchip-FFmpeg-Builds/releases/download/6.1-7/ffmpeg /usr/lib/ffmpeg/6.0/bin/
+ADD --chmod=111 https://github.com/MarcA711/Rockchip-FFmpeg-Builds/releases/download/6.1-7/ffprobe /usr/lib/ffmpeg/6.0/bin/
+ENV DEFAULT_FFMPEG_VERSION="6.0"
+ENV INCLUDED_FFMPEG_VERSIONS="${DEFAULT_FFMPEG_VERSION}:${INCLUDED_FFMPEG_VERSIONS}"

docker/rockchip/conv2rknn.py

@@ -0,0 +1,82 @@
+import os
+
+import rknn
+import yaml
+from rknn.api import RKNN
+
+try:
+    with open(rknn.__path__[0] + "/VERSION") as file:
+        tk_version = file.read().strip()
+except FileNotFoundError:
+    pass
+
+try:
+    with open("/config/conv2rknn.yaml", "r") as config_file:
+        configuration = yaml.safe_load(config_file)
+except FileNotFoundError:
+    raise Exception("Please place a config.yaml file in /config/conv2rknn.yaml")
+
+if configuration["config"] != None:
+    rknn_config = configuration["config"]
+else:
+    rknn_config = {}
+
+if not os.path.isdir("/config/model_cache/rknn_cache/onnx"):
+    raise Exception(
+        "Place the onnx models you want to convert to rknn format in /config/model_cache/rknn_cache/onnx"
+    )
+
+if "soc" not in configuration:
+    try:
+        with open("/proc/device-tree/compatible") as file:
+            soc = file.read().split(",")[-1].strip("\x00")
+    except FileNotFoundError:
+        raise Exception("Make sure to run docker in privileged mode.")
+
+    configuration["soc"] = [
+        soc,
+    ]
+
+if "quantization" not in configuration:
+    configuration["quantization"] = False
+
+if "output_name" not in configuration:
+    configuration["output_name"] = "{{input_basename}}"
+
+for input_filename in os.listdir("/config/model_cache/rknn_cache/onnx"):
+    for soc in configuration["soc"]:
+        quant = "i8" if configuration["quantization"] else "fp16"
+
+        input_path = "/config/model_cache/rknn_cache/onnx/" + input_filename
+        input_basename = input_filename[: input_filename.rfind(".")]
+
+        output_filename = (
+            configuration["output_name"].format(
+                quant=quant,
+                input_basename=input_basename,
+                soc=soc,
+                tk_version=tk_version,
+            )
+            + ".rknn"
+        )
+        output_path = "/config/model_cache/rknn_cache/" + output_filename
+
+        rknn_config["target_platform"] = soc
+
+        rknn = RKNN(verbose=True)
+        rknn.config(**rknn_config)
+
+        if rknn.load_onnx(model=input_path) != 0:
+            raise Exception("Error loading model.")
+
+        if (
+            rknn.build(
+                do_quantization=configuration["quantization"],
+                dataset="/COCO/coco_subset_20.txt",
+            )
+            != 0
+        ):
+            raise Exception("Error building model.")
+
+        if rknn.export_rknn(output_path) != 0:
+            raise Exception("Error exporting rknn model.")

docker/rockchip/requirements-wheels-rk.txt

@@ -1 +1,2 @@
-rknn-toolkit-lite2 @ https://github.com/MarcA711/rknn-toolkit2/releases/download/v2.0.0/rknn_toolkit_lite2-2.0.0b0-cp39-cp39-linux_aarch64.whl
+rknn-toolkit2 == 2.3.0
+rknn-toolkit-lite2 == 2.3.0

docker/rockchip/rk.mk

@@ -1,10 +1,15 @@
 BOARDS += rk
 
 local-rk: version
-	docker buildx bake --load --file=docker/rockchip/rk.hcl --set rk.tags=frigate:latest-rk rk
+	docker buildx bake --file=docker/rockchip/rk.hcl rk \
+		--set rk.tags=frigate:latest-rk \
+		--load
 
 build-rk: version
-	docker buildx bake --file=docker/rockchip/rk.hcl --set rk.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rk rk
+	docker buildx bake --file=docker/rockchip/rk.hcl rk \
+		--set rk.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rk
 
 push-rk: build-rk
-	docker buildx bake --push --file=docker/rockchip/rk.hcl --set rk.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rk rk
+	docker buildx bake --file=docker/rockchip/rk.hcl rk \
+		--set rk.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rk \
+		--push

docker/rocm/Dockerfile

@@ -2,74 +2,49 @@
 
 # https://askubuntu.com/questions/972516/debian-frontend-environment-variable
 ARG DEBIAN_FRONTEND=noninteractive
-ARG ROCM=5.7.3
+ARG ROCM=6.3.3
 ARG AMDGPU=gfx900
 ARG HSA_OVERRIDE_GFX_VERSION
 ARG HSA_OVERRIDE
 
 #######################################################################
-FROM ubuntu:focal as rocm
+FROM wget AS rocm
 
 ARG ROCM
+ARG AMDGPU
 
-RUN apt-get update && apt-get -y upgrade
-RUN apt-get -y install gnupg wget
-
-RUN mkdir --parents --mode=0755 /etc/apt/keyrings
-
-RUN wget https://repo.radeon.com/rocm/rocm.gpg.key -O - | gpg --dearmor | tee /etc/apt/keyrings/rocm.gpg > /dev/null
-COPY docker/rocm/rocm.list /etc/apt/sources.list.d/
-COPY docker/rocm/rocm-pin-600 /etc/apt/preferences.d/
-
-RUN apt-get update
-
-RUN apt-get -y install --no-install-recommends migraphx
-RUN apt-get -y install --no-install-recommends migraphx-dev
+RUN apt update && \
+    apt install -y wget gpg && \
+    wget -O rocm.deb https://repo.radeon.com/amdgpu-install/$ROCM/ubuntu/jammy/amdgpu-install_6.3.60303-1_all.deb && \
+    apt install -y ./rocm.deb && \
+    apt update && \
+    apt install -y rocm
 
 RUN mkdir -p /opt/rocm-dist/opt/rocm-$ROCM/lib
-RUN cd /opt/rocm-$ROCM/lib && cp -dpr libMIOpen*.so* libamd*.so* libhip*.so* libhsa*.so* libmigraphx*.so* librocm*.so* librocblas*.so* /opt/rocm-dist/opt/rocm-$ROCM/lib/
+RUN cd /opt/rocm-$ROCM/lib && \
+    cp -dpr libMIOpen*.so* libamd*.so* libhip*.so* libhsa*.so* libmigraphx*.so* librocm*.so* librocblas*.so* libroctracer*.so* librocfft*.so* librocprofiler*.so* libroctx*.so* /opt/rocm-dist/opt/rocm-$ROCM/lib/ && \
+    mkdir -p /opt/rocm-dist/opt/rocm-$ROCM/lib/migraphx/lib && \
+    cp -dpr migraphx/lib/* /opt/rocm-dist/opt/rocm-$ROCM/lib/migraphx/lib
 RUN cd /opt/rocm-dist/opt/ && ln -s rocm-$ROCM rocm
 
 RUN mkdir -p /opt/rocm-dist/etc/ld.so.conf.d/
 RUN echo /opt/rocm/lib|tee /opt/rocm-dist/etc/ld.so.conf.d/rocm.conf
 
-#######################################################################
-FROM --platform=linux/amd64 debian:11 as debian-base
-
-RUN apt-get update && apt-get -y upgrade
-RUN apt-get -y install --no-install-recommends libelf1 libdrm2 libdrm-amdgpu1 libnuma1 kmod
-
-RUN apt-get -y install python3
-
-#######################################################################
-# ROCm does not come with migraphx wrappers for python 3.9, so we build it here
-FROM debian-base as debian-build
-
-ARG ROCM
-
-COPY --from=rocm /opt/rocm-$ROCM /opt/rocm-$ROCM
-RUN ln -s /opt/rocm-$ROCM /opt/rocm
-
-RUN apt-get -y install g++ cmake
-RUN apt-get -y install python3-pybind11 python3.9-distutils python3-dev
-
-WORKDIR /opt/build
-
-COPY docker/rocm/migraphx .
-
-RUN mkdir build && cd build && cmake .. && make install
-
 #######################################################################
 FROM deps AS deps-prelim
 
-# need this to install libnuma1
-RUN apt-get update
-# no ugprade?!?!
-RUN apt-get -y install libnuma1
+RUN apt-get update && apt-get install -y libnuma1
 
-WORKDIR /opt/frigate/
+WORKDIR /opt/frigate
 COPY --from=rootfs / /
-COPY docker/rocm/rootfs/ /
+
+RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
+    && python3 get-pip.py "pip" --break-system-packages
+RUN python3 -m pip config set global.break-system-packages true
+
+COPY docker/rocm/requirements-wheels-rocm.txt /requirements.txt
+RUN pip3 uninstall -y onnxruntime-openvino \
+    && pip3 install -r /requirements.txt
 
 #######################################################################
 FROM scratch AS rocm-dist
@@ -79,14 +54,14 @@ ARG AMDGPU
 
 COPY --from=rocm /opt/rocm-$ROCM/bin/rocminfo /opt/rocm-$ROCM/bin/migraphx-driver /opt/rocm-$ROCM/bin/
 COPY --from=rocm /opt/rocm-$ROCM/share/miopen/db/*$AMDGPU* /opt/rocm-$ROCM/share/miopen/db/
+COPY --from=rocm /opt/rocm-$ROCM/share/miopen/db/*gfx908* /opt/rocm-$ROCM/share/miopen/db/
 COPY --from=rocm /opt/rocm-$ROCM/lib/rocblas/library/*$AMDGPU* /opt/rocm-$ROCM/lib/rocblas/library/
 COPY --from=rocm /opt/rocm-dist/ /
-COPY --from=debian-build /opt/rocm/lib/migraphx.cpython-39-x86_64-linux-gnu.so /opt/rocm-$ROCM/lib/
 
 #######################################################################
 FROM deps-prelim AS rocm-prelim-hsa-override0
-
 ENV HSA_ENABLE_SDMA=0
+ENV MIGRAPHX_ENABLE_NHWC=1
 
 COPY --from=rocm-dist / /
 
@@ -101,6 +76,3 @@ ENV HSA_OVERRIDE_GFX_VERSION=$HSA_OVERRIDE_GFX_VERSION
 #######################################################################
 FROM rocm-prelim-hsa-override$HSA_OVERRIDE as rocm-deps
 
-# Request yolov8 download at startup
-ENV DOWNLOAD_YOLOV8=1
-

docker/rocm/migraphx/CMakeLists.txt

@@ -1,26 +0,0 @@
-
-cmake_minimum_required(VERSION 3.1)
-
-set(CMAKE_CXX_STANDARD 17)
-set(CMAKE_CXX_STANDARD_REQUIRED ON)
-set(CMAKE_CXX_EXTENSIONS OFF)
-
-if(NOT CMAKE_BUILD_TYPE)
-  set(CMAKE_BUILD_TYPE Release)
-endif()
-
-SET(CMAKE_INSTALL_RPATH_USE_LINK_PATH TRUE)
-
-project(migraphx_py)
-
-include_directories(/opt/rocm/include)
-
-find_package(pybind11 REQUIRED)
-pybind11_add_module(migraphx migraphx_py.cpp)
-
-target_link_libraries(migraphx PRIVATE /opt/rocm/lib/libmigraphx.so /opt/rocm/lib/libmigraphx_tf.so /opt/rocm/lib/libmigraphx_onnx.so)
-
-install(TARGETS migraphx
-  COMPONENT python
-  LIBRARY DESTINATION /opt/rocm/lib
-)

docker/rocm/migraphx/migraphx_py.cpp

@@ -1,582 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2015-2022 Advanced Micro Devices, Inc. All rights reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <pybind11/pybind11.h>
-#include <pybind11/stl.h>
-#include <pybind11/numpy.h>
-#include <migraphx/program.hpp>
-#include <migraphx/instruction_ref.hpp>
-#include <migraphx/operation.hpp>
-#include <migraphx/quantization.hpp>
-#include <migraphx/generate.hpp>
-#include <migraphx/instruction.hpp>
-#include <migraphx/ref/target.hpp>
-#include <migraphx/stringutils.hpp>
-#include <migraphx/tf.hpp>
-#include <migraphx/onnx.hpp>
-#include <migraphx/load_save.hpp>
-#include <migraphx/register_target.hpp>
-#include <migraphx/json.hpp>
-#include <migraphx/make_op.hpp>
-#include <migraphx/op/common.hpp>
-
-#ifdef HAVE_GPU
-#include <migraphx/gpu/hip.hpp>
-#endif
-
-using half   = half_float::half;
-namespace py = pybind11;
-
-#ifdef __clang__
-#define MIGRAPHX_PUSH_UNUSED_WARNING \
-    _Pragma("clang diagnostic push") \
-        _Pragma("clang diagnostic ignored \"-Wused-but-marked-unused\"")
-#define MIGRAPHX_POP_WARNING _Pragma("clang diagnostic pop")
-#else
-#define MIGRAPHX_PUSH_UNUSED_WARNING
-#define MIGRAPHX_POP_WARNING
-#endif
-#define MIGRAPHX_PYBIND11_MODULE(...) \
-    MIGRAPHX_PUSH_UNUSED_WARNING      \
-    PYBIND11_MODULE(__VA_ARGS__)      \
-    MIGRAPHX_POP_WARNING
-
-#define MIGRAPHX_PYTHON_GENERATE_SHAPE_ENUM(x, t) .value(#x, migraphx::shape::type_t::x)
-namespace migraphx {
-
-migraphx::value to_value(py::kwargs kwargs);
-migraphx::value to_value(py::list lst);
-
-template <class T, class F>
-void visit_py(T x, F f)
-{
-    if(py::isinstance<py::kwargs>(x))
-    {
-        f(to_value(x.template cast<py::kwargs>()));
-    }
-    else if(py::isinstance<py::list>(x))
-    {
-        f(to_value(x.template cast<py::list>()));
-    }
-    else if(py::isinstance<py::bool_>(x))
-    {
-        f(x.template cast<bool>());
-    }
-    else if(py::isinstance<py::int_>(x) or py::hasattr(x, "__index__"))
-    {
-        f(x.template cast<int>());
-    }
-    else if(py::isinstance<py::float_>(x))
-    {
-        f(x.template cast<float>());
-    }
-    else if(py::isinstance<py::str>(x))
-    {
-        f(x.template cast<std::string>());
-    }
-    else if(py::isinstance<migraphx::shape::dynamic_dimension>(x))
-    {
-        f(migraphx::to_value(x.template cast<migraphx::shape::dynamic_dimension>()));
-    }
-    else
-    {
-        MIGRAPHX_THROW("VISIT_PY: Unsupported data type!");
-    }
-}
-
-migraphx::value to_value(py::list lst)
-{
-    migraphx::value v = migraphx::value::array{};
-    for(auto val : lst)
-    {
-        visit_py(val, [&](auto py_val) { v.push_back(py_val); });
-    }
-
-    return v;
-}
-
-migraphx::value to_value(py::kwargs kwargs)
-{
-    migraphx::value v = migraphx::value::object{};
-
-    for(auto arg : kwargs)
-    {
-        auto&& key = py::str(arg.first);
-        auto&& val = arg.second;
-        visit_py(val, [&](auto py_val) { v[key] = py_val; });
-    }
-    return v;
-}
-} // namespace migraphx
-
-namespace pybind11 {
-namespace detail {
-
-template <>
-struct npy_format_descriptor<half>
-{
-    static std::string format()
-    {
-        // following: https://docs.python.org/3/library/struct.html#format-characters
-        return "e";
-    }
-    static constexpr auto name() { return _("half"); }
-};
-
-} // namespace detail
-} // namespace pybind11
-
-template <class F>
-void visit_type(const migraphx::shape& s, F f)
-{
-    s.visit_type(f);
-}
-
-template <class T, class F>
-void visit(const migraphx::raw_data<T>& x, F f)
-{
-    x.visit(f);
-}
-
-template <class F>
-void visit_types(F f)
-{
-    migraphx::shape::visit_types(f);
-}
-
-template <class T>
-py::buffer_info to_buffer_info(T& x)
-{
-    migraphx::shape s = x.get_shape();
-    assert(s.type() != migraphx::shape::tuple_type);
-    if(s.dynamic())
-        MIGRAPHX_THROW("MIGRAPHX PYTHON: dynamic shape argument passed to to_buffer_info");
-    auto strides = s.strides();
-    std::transform(
-        strides.begin(), strides.end(), strides.begin(), [&](auto i) { return i * s.type_size(); });
-    py::buffer_info b;
-    visit_type(s, [&](auto as) {
-        // migraphx use int8_t data to store bool type, we need to
-        // explicitly specify the data type as bool for python
-        if(s.type() == migraphx::shape::bool_type)
-        {
-            b = py::buffer_info(x.data(),
-                                as.size(),
-                                py::format_descriptor<bool>::format(),
-                                s.ndim(),
-                                s.lens(),
-                                strides);
-        }
-        else
-        {
-            b = py::buffer_info(x.data(),
-                                as.size(),
-                                py::format_descriptor<decltype(as())>::format(),
-                                s.ndim(),
-                                s.lens(),
-                                strides);
-        }
-    });
-    return b;
-}
-
-migraphx::shape to_shape(const py::buffer_info& info)
-{
-    migraphx::shape::type_t t;
-    std::size_t n = 0;
-    visit_types([&](auto as) {
-        if(info.format == py::format_descriptor<decltype(as())>::format() or
-           (info.format == "l" and py::format_descriptor<decltype(as())>::format() == "q") or
-           (info.format == "L" and py::format_descriptor<decltype(as())>::format() == "Q"))
-        {
-            t = as.type_enum();
-            n = sizeof(as());
-        }
-        else if(info.format == "?" and py::format_descriptor<decltype(as())>::format() == "b")
-        {
-            t = migraphx::shape::bool_type;
-            n = sizeof(bool);
-        }
-    });
-
-    if(n == 0)
-    {
-        MIGRAPHX_THROW("MIGRAPHX PYTHON: Unsupported data type " + info.format);
-    }
-
-    auto strides = info.strides;
-    std::transform(strides.begin(), strides.end(), strides.begin(), [&](auto i) -> std::size_t {
-        return n > 0 ? i / n : 0;
-    });
-
-    // scalar support
-    if(info.shape.empty())
-    {
-        return migraphx::shape{t};
-    }
-    else
-    {
-        return migraphx::shape{t, info.shape, strides};
-    }
-}
-
-MIGRAPHX_PYBIND11_MODULE(migraphx, m)
-{
-    py::class_<migraphx::shape> shape_cls(m, "shape");
-    shape_cls
-        .def(py::init([](py::kwargs kwargs) {
-            auto v = migraphx::to_value(kwargs);
-            auto t = migraphx::shape::parse_type(v.get("type", "float"));
-            if(v.contains("dyn_dims"))
-            {
-                auto dyn_dims =
-                    migraphx::from_value<std::vector<migraphx::shape::dynamic_dimension>>(
-                        v.at("dyn_dims"));
-                return migraphx::shape(t, dyn_dims);
-            }
-            auto lens = v.get<std::size_t>("lens", {1});
-            if(v.contains("strides"))
-                return migraphx::shape(t, lens, v.at("strides").to_vector<std::size_t>());
-            else
-                return migraphx::shape(t, lens);
-        }))
-        .def("type", &migraphx::shape::type)
-        .def("lens", &migraphx::shape::lens)
-        .def("strides", &migraphx::shape::strides)
-        .def("ndim", &migraphx::shape::ndim)
-        .def("elements", &migraphx::shape::elements)
-        .def("bytes", &migraphx::shape::bytes)
-        .def("type_string", &migraphx::shape::type_string)
-        .def("type_size", &migraphx::shape::type_size)
-        .def("dyn_dims", &migraphx::shape::dyn_dims)
-        .def("packed", &migraphx::shape::packed)
-        .def("transposed", &migraphx::shape::transposed)
-        .def("broadcasted", &migraphx::shape::broadcasted)
-        .def("standard", &migraphx::shape::standard)
-        .def("scalar", &migraphx::shape::scalar)
-        .def("dynamic", &migraphx::shape::dynamic)
-        .def("__eq__", std::equal_to<migraphx::shape>{})
-        .def("__ne__", std::not_equal_to<migraphx::shape>{})
-        .def("__repr__", [](const migraphx::shape& s) { return migraphx::to_string(s); });
-
-    py::enum_<migraphx::shape::type_t>(shape_cls, "type_t")
-        MIGRAPHX_SHAPE_VISIT_TYPES(MIGRAPHX_PYTHON_GENERATE_SHAPE_ENUM);
-
-    py::class_<migraphx::shape::dynamic_dimension>(shape_cls, "dynamic_dimension")
-        .def(py::init<>())
-        .def(py::init<std::size_t, std::size_t>())
-        .def(py::init<std::size_t, std::size_t, std::set<std::size_t>>())
-        .def_readwrite("min", &migraphx::shape::dynamic_dimension::min)
-        .def_readwrite("max", &migraphx::shape::dynamic_dimension::max)
-        .def_readwrite("optimals", &migraphx::shape::dynamic_dimension::optimals)
-        .def("is_fixed", &migraphx::shape::dynamic_dimension::is_fixed);
-
-    py::class_<migraphx::argument>(m, "argument", py::buffer_protocol())
-        .def_buffer([](migraphx::argument& x) -> py::buffer_info { return to_buffer_info(x); })
-        .def(py::init([](py::buffer b) {
-            py::buffer_info info = b.request();
-            return migraphx::argument(to_shape(info), info.ptr);
-        }))
-        .def("get_shape", &migraphx::argument::get_shape)
-        .def("data_ptr",
-             [](migraphx::argument& x) { return reinterpret_cast<std::uintptr_t>(x.data()); })
-        .def("tolist",
-             [](migraphx::argument& x) {
-                 py::list l{x.get_shape().elements()};
-                 visit(x, [&](auto data) { l = py::cast(data.to_vector()); });
-                 return l;
-             })
-        .def("__eq__", std::equal_to<migraphx::argument>{})
-        .def("__ne__", std::not_equal_to<migraphx::argument>{})
-        .def("__repr__", [](const migraphx::argument& x) { return migraphx::to_string(x); });
-
-    py::class_<migraphx::target>(m, "target");
-
-    py::class_<migraphx::instruction_ref>(m, "instruction_ref")
-        .def("shape", [](migraphx::instruction_ref i) { return i->get_shape(); })
-        .def("op", [](migraphx::instruction_ref i) { return i->get_operator(); });
-
-    py::class_<migraphx::module, std::unique_ptr<migraphx::module, py::nodelete>>(m, "module")
-        .def("print", [](const migraphx::module& mm) { std::cout << mm << std::endl; })
-        .def(
-            "add_instruction",
-            [](migraphx::module& mm,
-               const migraphx::operation& op,
-               std::vector<migraphx::instruction_ref>& args,
-               std::vector<migraphx::module*>& mod_args) {
-                return mm.add_instruction(op, args, mod_args);
-            },
-            py::arg("op"),
-            py::arg("args"),
-            py::arg("mod_args") = std::vector<migraphx::module*>{})
-        .def(
-            "add_literal",
-            [](migraphx::module& mm, py::buffer data) {
-                py::buffer_info info = data.request();
-                auto literal_shape   = to_shape(info);
-                return mm.add_literal(literal_shape, reinterpret_cast<char*>(info.ptr));
-            },
-            py::arg("data"))
-        .def(
-            "add_parameter",
-            [](migraphx::module& mm, const std::string& name, const migraphx::shape shape) {
-                return mm.add_parameter(name, shape);
-            },
-            py::arg("name"),
-            py::arg("shape"))
-        .def(
-            "add_return",
-            [](migraphx::module& mm, std::vector<migraphx::instruction_ref>& args) {
-                return mm.add_return(args);
-            },
-            py::arg("args"))
-        .def("__repr__", [](const migraphx::module& mm) { return migraphx::to_string(mm); });
-
-    py::class_<migraphx::program>(m, "program")
-        .def(py::init([]() { return migraphx::program(); }))
-        .def("get_parameter_names", &migraphx::program::get_parameter_names)
-        .def("get_parameter_shapes", &migraphx::program::get_parameter_shapes)
-        .def("get_output_shapes", &migraphx::program::get_output_shapes)
-        .def("is_compiled", &migraphx::program::is_compiled)
-        .def(
-            "compile",
-            [](migraphx::program& p,
-               const migraphx::target& t,
-               bool offload_copy,
-               bool fast_math,
-               bool exhaustive_tune) {
-                migraphx::compile_options options;
-                options.offload_copy    = offload_copy;
-                options.fast_math       = fast_math;
-                options.exhaustive_tune = exhaustive_tune;
-                p.compile(t, options);
-            },
-            py::arg("t"),
-            py::arg("offload_copy")    = true,
-            py::arg("fast_math")       = true,
-            py::arg("exhaustive_tune") = false)
-        .def("get_main_module", [](const migraphx::program& p) { return p.get_main_module(); })
-        .def(
-            "create_module",
-            [](migraphx::program& p, const std::string& name) { return p.create_module(name); },
-            py::arg("name"))
-        .def("run",
-             [](migraphx::program& p, py::dict params) {
-                 migraphx::parameter_map pm;
-                 for(auto x : params)
-                 {
-                     std::string key      = x.first.cast<std::string>();
-                     py::buffer b         = x.second.cast<py::buffer>();
-                     py::buffer_info info = b.request();
-                     pm[key]              = migraphx::argument(to_shape(info), info.ptr);
-                 }
-                 return p.eval(pm);
-             })
-        .def("run_async",
-             [](migraphx::program& p,
-                py::dict params,
-                std::uintptr_t stream,
-                std::string stream_name) {
-                 migraphx::parameter_map pm;
-                 for(auto x : params)
-                 {
-                     std::string key      = x.first.cast<std::string>();
-                     py::buffer b         = x.second.cast<py::buffer>();
-                     py::buffer_info info = b.request();
-                     pm[key]              = migraphx::argument(to_shape(info), info.ptr);
-                 }
-                 migraphx::execution_environment exec_env{
-                     migraphx::any_ptr(reinterpret_cast<void*>(stream), stream_name), true};
-                 return p.eval(pm, exec_env);
-             })
-        .def("sort", &migraphx::program::sort)
-        .def("print", [](const migraphx::program& p) { std::cout << p << std::endl; })
-        .def("__eq__", std::equal_to<migraphx::program>{})
-        .def("__ne__", std::not_equal_to<migraphx::program>{})
-        .def("__repr__", [](const migraphx::program& p) { return migraphx::to_string(p); });
-
-    py::class_<migraphx::operation> op(m, "op");
-    op.def(py::init([](const std::string& name, py::kwargs kwargs) {
-          migraphx::value v = migraphx::value::object{};
-          if(kwargs)
-          {
-              v = migraphx::to_value(kwargs);
-          }
-          return migraphx::make_op(name, v);
-      }))
-        .def("name", &migraphx::operation::name);
-
-    py::enum_<migraphx::op::pooling_mode>(op, "pooling_mode")
-        .value("average", migraphx::op::pooling_mode::average)
-        .value("max", migraphx::op::pooling_mode::max)
-        .value("lpnorm", migraphx::op::pooling_mode::lpnorm);
-
-    py::enum_<migraphx::op::rnn_direction>(op, "rnn_direction")
-        .value("forward", migraphx::op::rnn_direction::forward)
-        .value("reverse", migraphx::op::rnn_direction::reverse)
-        .value("bidirectional", migraphx::op::rnn_direction::bidirectional);
-
-    m.def(
-        "argument_from_pointer",
-        [](const migraphx::shape shape, const int64_t address) {
-            return migraphx::argument(shape, reinterpret_cast<void*>(address));
-        },
-        py::arg("shape"),
-        py::arg("address"));
-
-    m.def(
-        "parse_tf",
-        [](const std::string& filename,
-           bool is_nhwc,
-           unsigned int batch_size,
-           std::unordered_map<std::string, std::vector<std::size_t>> map_input_dims,
-           std::vector<std::string> output_names) {
-            return migraphx::parse_tf(
-                filename, migraphx::tf_options{is_nhwc, batch_size, map_input_dims, output_names});
-        },
-        "Parse tf protobuf (default format is nhwc)",
-        py::arg("filename"),
-        py::arg("is_nhwc")        = true,
-        py::arg("batch_size")     = 1,
-        py::arg("map_input_dims") = std::unordered_map<std::string, std::vector<std::size_t>>(),
-        py::arg("output_names")   = std::vector<std::string>());
-
-    m.def(
-        "parse_onnx",
-        [](const std::string& filename,
-           unsigned int default_dim_value,
-           migraphx::shape::dynamic_dimension default_dyn_dim_value,
-           std::unordered_map<std::string, std::vector<std::size_t>> map_input_dims,
-           std::unordered_map<std::string, std::vector<migraphx::shape::dynamic_dimension>>
-               map_dyn_input_dims,
-           bool skip_unknown_operators,
-           bool print_program_on_error,
-           int64_t max_loop_iterations) {
-            migraphx::onnx_options options;
-            options.default_dim_value      = default_dim_value;
-            options.default_dyn_dim_value  = default_dyn_dim_value;
-            options.map_input_dims         = map_input_dims;
-            options.map_dyn_input_dims     = map_dyn_input_dims;
-            options.skip_unknown_operators = skip_unknown_operators;
-            options.print_program_on_error = print_program_on_error;
-            options.max_loop_iterations    = max_loop_iterations;
-            return migraphx::parse_onnx(filename, options);
-        },
-        "Parse onnx file",
-        py::arg("filename"),
-        py::arg("default_dim_value")     = 0,
-        py::arg("default_dyn_dim_value") = migraphx::shape::dynamic_dimension{1, 1},
-        py::arg("map_input_dims") = std::unordered_map<std::string, std::vector<std::size_t>>(),
-        py::arg("map_dyn_input_dims") =
-            std::unordered_map<std::string, std::vector<migraphx::shape::dynamic_dimension>>(),
-        py::arg("skip_unknown_operators") = false,
-        py::arg("print_program_on_error") = false,
-        py::arg("max_loop_iterations")    = 10);
-
-    m.def(
-        "parse_onnx_buffer",
-        [](const std::string& onnx_buffer,
-           unsigned int default_dim_value,
-           migraphx::shape::dynamic_dimension default_dyn_dim_value,
-           std::unordered_map<std::string, std::vector<std::size_t>> map_input_dims,
-           std::unordered_map<std::string, std::vector<migraphx::shape::dynamic_dimension>>
-               map_dyn_input_dims,
-           bool skip_unknown_operators,
-           bool print_program_on_error) {
-            migraphx::onnx_options options;
-            options.default_dim_value      = default_dim_value;
-            options.default_dyn_dim_value  = default_dyn_dim_value;
-            options.map_input_dims         = map_input_dims;
-            options.map_dyn_input_dims     = map_dyn_input_dims;
-            options.skip_unknown_operators = skip_unknown_operators;
-            options.print_program_on_error = print_program_on_error;
-            return migraphx::parse_onnx_buffer(onnx_buffer, options);
-        },
-        "Parse onnx file",
-        py::arg("filename"),
-        py::arg("default_dim_value")     = 0,
-        py::arg("default_dyn_dim_value") = migraphx::shape::dynamic_dimension{1, 1},
-        py::arg("map_input_dims") = std::unordered_map<std::string, std::vector<std::size_t>>(),
-        py::arg("map_dyn_input_dims") =
-            std::unordered_map<std::string, std::vector<migraphx::shape::dynamic_dimension>>(),
-        py::arg("skip_unknown_operators") = false,
-        py::arg("print_program_on_error") = false);
-
-    m.def(
-        "load",
-        [](const std::string& name, const std::string& format) {
-            migraphx::file_options options;
-            options.format = format;
-            return migraphx::load(name, options);
-        },
-        "Load MIGraphX program",
-        py::arg("filename"),
-        py::arg("format") = "msgpack");
-
-    m.def(
-        "save",
-        [](const migraphx::program& p, const std::string& name, const std::string& format) {
-            migraphx::file_options options;
-            options.format = format;
-            return migraphx::save(p, name, options);
-        },
-        "Save MIGraphX program",
-        py::arg("p"),
-        py::arg("filename"),
-        py::arg("format") = "msgpack");
-
-    m.def("get_target", &migraphx::make_target);
-    m.def("create_argument", [](const migraphx::shape& s, const std::vector<double>& values) {
-        if(values.size() != s.elements())
-            MIGRAPHX_THROW("Values and shape elements do not match");
-        migraphx::argument a{s};
-        a.fill(values.begin(), values.end());
-        return a;
-    });
-    m.def("generate_argument", &migraphx::generate_argument, py::arg("s"), py::arg("seed") = 0);
-    m.def("fill_argument", &migraphx::fill_argument, py::arg("s"), py::arg("value"));
-    m.def("quantize_fp16",
-          &migraphx::quantize_fp16,
-          py::arg("prog"),
-          py::arg("ins_names") = std::vector<std::string>{"all"});
-    m.def("quantize_int8",
-          &migraphx::quantize_int8,
-          py::arg("prog"),
-          py::arg("t"),
-          py::arg("calibration") = std::vector<migraphx::parameter_map>{},
-          py::arg("ins_names")   = std::vector<std::string>{"dot", "convolution"});
-
-#ifdef HAVE_GPU
-    m.def("allocate_gpu", &migraphx::gpu::allocate_gpu, py::arg("s"), py::arg("host") = false);
-    m.def("to_gpu", &migraphx::gpu::to_gpu, py::arg("arg"), py::arg("host") = false);
-    m.def("from_gpu", &migraphx::gpu::from_gpu);
-    m.def("gpu_sync", [] { migraphx::gpu::gpu_sync(); });
-#endif
-
-#ifdef VERSION_INFO
-    m.attr("__version__") = VERSION_INFO;
-#else
-    m.attr("__version__") = "dev";
-#endif
-}

docker/rocm/requirements-wheels-rocm.txt

@@ -0,0 +1 @@
+onnxruntime-rocm @ https://github.com/NickM-27/frigate-onnxruntime-rocm/releases/download/v6.3.3/onnxruntime_rocm-1.20.1-cp311-cp311-linux_x86_64.whl

docker/rocm/rocm-pin-600

@@ -1,3 +0,0 @@
-Package: *
-Pin: release o=repo.radeon.com
-Pin-Priority: 600

docker/rocm/rocm.hcl

@@ -2,7 +2,7 @@ variable "AMDGPU" {
   default = "gfx900"
 }
 variable "ROCM" {
-  default = "5.7.3"
+  default = "6.3.3"
 }
 variable "HSA_OVERRIDE_GFX_VERSION" {
   default = ""
@@ -10,6 +10,13 @@ variable "HSA_OVERRIDE_GFX_VERSION" {
 variable "HSA_OVERRIDE" {
   default = "1"
 }
+
+target wget {
+  dockerfile = "docker/main/Dockerfile"
+  platforms = ["linux/amd64"]
+  target = "wget"
+}
+
 target deps {
   dockerfile = "docker/main/Dockerfile"
   platforms = ["linux/amd64"]
@@ -26,6 +33,7 @@ target rocm {
   dockerfile = "docker/rocm/Dockerfile"
   contexts = {
     deps = "target:deps",
+    wget = "target:wget",
     rootfs = "target:rootfs"
   }
   platforms = ["linux/amd64"]

docker/rocm/rocm.list

@@ -1 +0,0 @@
-deb [arch=amd64 signed-by=/etc/apt/keyrings/rocm.gpg] https://repo.radeon.com/rocm/apt/5.7.3 focal main

docker/rocm/rocm.mk

@@ -4,14 +4,50 @@ BOARDS += rocm
 ROCM_CHIPSETS:=gfx900:9.0.0 gfx1030:10.3.0 gfx1100:11.0.0
 
 local-rocm: version
-	$(foreach chipset,$(ROCM_CHIPSETS),AMDGPU=$(word 1,$(subst :, ,$(chipset))) HSA_OVERRIDE_GFX_VERSION=$(word 2,$(subst :, ,$(chipset))) HSA_OVERRIDE=1 docker buildx bake --load --file=docker/rocm/rocm.hcl --set rocm.tags=frigate:latest-rocm-$(word 1,$(subst :, ,$(chipset))) rocm;)
-	unset HSA_OVERRIDE_GFX_VERSION && HSA_OVERRIDE=0 AMDGPU=gfx docker buildx bake --load --file=docker/rocm/rocm.hcl --set rocm.tags=frigate:latest-rocm rocm
+	$(foreach chipset,$(ROCM_CHIPSETS), \
+		AMDGPU=$(word 1,$(subst :, ,$(chipset))) \
+		HSA_OVERRIDE_GFX_VERSION=$(word 2,$(subst :, ,$(chipset))) \
+		HSA_OVERRIDE=1 \
+		docker buildx bake --file=docker/rocm/rocm.hcl rocm \
+			--set rocm.tags=frigate:latest-rocm-$(word 1,$(subst :, ,$(chipset))) \
+			--load \
+	&&) true
+	
+	unset HSA_OVERRIDE_GFX_VERSION && \
+	HSA_OVERRIDE=0 \
+	AMDGPU=gfx \
+	docker buildx bake --file=docker/rocm/rocm.hcl rocm \
+		--set rocm.tags=frigate:latest-rocm \
+		--load
 
 build-rocm: version
-	$(foreach chipset,$(ROCM_CHIPSETS),AMDGPU=$(word 1,$(subst :, ,$(chipset))) HSA_OVERRIDE_GFX_VERSION=$(word 2,$(subst :, ,$(chipset))) HSA_OVERRIDE=1 docker buildx bake --file=docker/rocm/rocm.hcl --set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm-$(chipset) rocm;)
-	unset HSA_OVERRIDE_GFX_VERSION && HSA_OVERRIDE=0 AMDGPU=gfx docker buildx bake --file=docker/rocm/rocm.hcl --set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm rocm
+	$(foreach chipset,$(ROCM_CHIPSETS), \
+		AMDGPU=$(word 1,$(subst :, ,$(chipset))) \
+		HSA_OVERRIDE_GFX_VERSION=$(word 2,$(subst :, ,$(chipset))) \
+		HSA_OVERRIDE=1 \
+		docker buildx bake --file=docker/rocm/rocm.hcl rocm \
+			--set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm-$(chipset) \
+	&&) true
+
+	unset HSA_OVERRIDE_GFX_VERSION && \
+	HSA_OVERRIDE=0 \
+	AMDGPU=gfx \
+	docker buildx bake --file=docker/rocm/rocm.hcl rocm \
+		--set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm
 
 push-rocm: build-rocm
-	$(foreach chipset,$(ROCM_CHIPSETS),AMDGPU=$(word 1,$(subst :, ,$(chipset))) HSA_OVERRIDE_GFX_VERSION=$(word 2,$(subst :, ,$(chipset))) HSA_OVERRIDE=1 docker buildx bake --push --file=docker/rocm/rocm.hcl --set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm-$(chipset) rocm;)
-	unset HSA_OVERRIDE_GFX_VERSION && HSA_OVERRIDE=0 AMDGPU=gfx docker buildx bake --push --file=docker/rocm/rocm.hcl --set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm rocm
+	$(foreach chipset,$(ROCM_CHIPSETS), \
+		AMDGPU=$(word 1,$(subst :, ,$(chipset))) \
+		HSA_OVERRIDE_GFX_VERSION=$(word 2,$(subst :, ,$(chipset))) \
+		HSA_OVERRIDE=1 \
+		docker buildx bake --file=docker/rocm/rocm.hcl rocm \
+			--set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm-$(chipset) \
+			--push \
+	&&) true
 
+	unset HSA_OVERRIDE_GFX_VERSION && \
+	HSA_OVERRIDE=0 \
+	AMDGPU=gfx \
+	docker buildx bake --file=docker/rocm/rocm.hcl rocm \
+		--set rocm.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rocm \
+		--push

docker/rocm/rootfs/etc/s6-overlay/s6-rc.d/compile-rocm-models/run

@@ -1,20 +0,0 @@
-#!/command/with-contenv bash
-# shellcheck shell=bash
-# Compile YoloV8 ONNX files into ROCm MIGraphX files
-
-OVERRIDE=$(cd /opt/frigate && python3 -c 'import frigate.detectors.plugins.rocm as rocm; print(rocm.auto_override_gfx_version())')
-
-if ! test -z "$OVERRIDE"; then
-  echo "Using HSA_OVERRIDE_GFX_VERSION=${OVERRIDE}"
-  export HSA_OVERRIDE_GFX_VERSION=$OVERRIDE
-fi
-
-for onnx in /config/model_cache/yolov8/*.onnx
-do
-  mxr="${onnx%.onnx}.mxr"
-  if ! test -f $mxr; then
-    echo "processing $onnx into $mxr"
-    /opt/rocm/bin/migraphx-driver compile $onnx --optimize --gpu --enable-offload-copy --binary -o $mxr
-  fi
-done
-

docker/rocm/rootfs/etc/s6-overlay/s6-rc.d/compile-rocm-models/type

@@ -1 +0,0 @@
-oneshot

docker/rocm/rootfs/etc/s6-overlay/s6-rc.d/compile-rocm-models/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/compile-rocm-models/run

docker/rpi/Dockerfile

@@ -6,11 +6,12 @@ ARG DEBIAN_FRONTEND=noninteractive
 FROM deps AS rpi-deps
 ARG TARGETARCH
 
-RUN rm -rf /usr/lib/btbn-ffmpeg/
-
 # Install dependencies
 RUN --mount=type=bind,source=docker/rpi/install_deps.sh,target=/deps/install_deps.sh \
     /deps/install_deps.sh
 
+ENV DEFAULT_FFMPEG_VERSION="rpi"
+ENV INCLUDED_FFMPEG_VERSIONS="${DEFAULT_FFMPEG_VERSION}:${INCLUDED_FFMPEG_VERSIONS}"
+
 WORKDIR /opt/frigate/
 COPY --from=rootfs / /

docker/rpi/install_deps.sh

@@ -18,13 +18,17 @@ apt-get -qq install --no-install-recommends -y \
 mkdir -p -m 600 /root/.gnupg
 
 # enable non-free repo
-sed -i -e's/ main/ main contrib non-free/g' /etc/apt/sources.list
+echo "deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware" | tee -a /etc/apt/sources.list
+apt update
 
 # ffmpeg -> arm64
 if [[ "${TARGETARCH}" == "arm64" ]]; then
     # add raspberry pi repo
     gpg --no-default-keyring --keyring /usr/share/keyrings/raspbian.gpg --keyserver keyserver.ubuntu.com --recv-keys 82B129927FA3303E
-    echo "deb [signed-by=/usr/share/keyrings/raspbian.gpg] https://archive.raspberrypi.org/debian/ bullseye main" | tee /etc/apt/sources.list.d/raspi.list
+    echo "deb [signed-by=/usr/share/keyrings/raspbian.gpg] https://archive.raspberrypi.org/debian/ bookworm main" | tee /etc/apt/sources.list.d/raspi.list
     apt-get -qq update
     apt-get -qq install --no-install-recommends --no-install-suggests -y ffmpeg
+    mkdir -p /usr/lib/ffmpeg/rpi/bin
+    ln -svf /usr/bin/ffmpeg /usr/lib/ffmpeg/rpi/bin/ffmpeg
+    ln -svf /usr/bin/ffprobe /usr/lib/ffmpeg/rpi/bin/ffprobe
 fi

docker/rpi/rpi.mk

@@ -1,10 +1,15 @@
 BOARDS += rpi
 
 local-rpi: version
-	docker buildx bake --load --file=docker/rpi/rpi.hcl --set rpi.tags=frigate:latest-rpi rpi
+	docker buildx bake --file=docker/rpi/rpi.hcl rpi \
+		--set rpi.tags=frigate:latest-rpi \
+		--load
 
 build-rpi: version
-	docker buildx bake --file=docker/rpi/rpi.hcl --set rpi.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rpi rpi
+	docker buildx bake --file=docker/rpi/rpi.hcl rpi \
+		--set rpi.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rpi
 
 push-rpi: build-rpi
-	docker buildx bake --push --file=docker/rpi/rpi.hcl --set rpi.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rpi rpi
+	docker buildx bake --file=docker/rpi/rpi.hcl rpi \
+		--set rpi.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-rpi \
+		--push

docker/tensorrt/Dockerfile.amd64

@@ -3,20 +3,16 @@
 # https://askubuntu.com/questions/972516/debian-frontend-environment-variable
 ARG DEBIAN_FRONTEND=noninteractive
 
-# Make this a separate target so it can be built/cached optionally
-FROM wheels as trt-wheels
-ARG DEBIAN_FRONTEND
-ARG TARGETARCH
-
-# Add TensorRT wheels to another folder
-COPY docker/tensorrt/requirements-amd64.txt /requirements-tensorrt.txt
-RUN mkdir -p /trt-wheels && pip3 wheel --wheel-dir=/trt-wheels -r /requirements-tensorrt.txt
+# Globally set pip break-system-packages option to avoid having to specify it every time
+ARG PIP_BREAK_SYSTEM_PACKAGES=1
 
 FROM tensorrt-base AS frigate-tensorrt
-ENV TRT_VER=8.5.3
-RUN --mount=type=bind,from=trt-wheels,source=/trt-wheels,target=/deps/trt-wheels \
-    pip3 install -U /deps/trt-wheels/*.whl && \
-    ldconfig
+ARG PIP_BREAK_SYSTEM_PACKAGES
+ENV TRT_VER=8.6.1
+
+# Install TensorRT wheels
+COPY docker/tensorrt/requirements-amd64.txt /requirements-tensorrt.txt
+RUN pip3 install -U -r /requirements-tensorrt.txt && ldconfig
 
 WORKDIR /opt/frigate/
 COPY --from=rootfs / /
@@ -26,6 +22,7 @@ FROM devcontainer AS devcontainer-trt
 
 COPY --from=trt-deps /usr/local/lib/libyolo_layer.so /usr/local/lib/libyolo_layer.so
 COPY --from=trt-deps /usr/local/src/tensorrt_demos /usr/local/src/tensorrt_demos
+COPY --from=trt-deps /usr/local/cuda-12.1 /usr/local/cuda
 COPY docker/tensorrt/detector/rootfs/ /
 COPY --from=trt-deps /usr/local/lib/libyolo_layer.so /usr/local/lib/libyolo_layer.so
 RUN --mount=type=bind,from=trt-wheels,source=/trt-wheels,target=/deps/trt-wheels \

docker/tensorrt/Dockerfile.arm64

@@ -7,20 +7,25 @@ ARG BASE_IMAGE
 FROM ${BASE_IMAGE} AS build-wheels
 ARG DEBIAN_FRONTEND
 
+# Add deadsnakes PPA for python3.11
+RUN apt-get -qq update && \
+        apt-get -qq install -y --no-install-recommends \
+        software-properties-common \
+        && add-apt-repository ppa:deadsnakes/ppa
+
 # Use a separate container to build wheels to prevent build dependencies in final image
 RUN apt-get -qq update \
     && apt-get -qq install -y --no-install-recommends \
-       python3.9 python3.9-dev \
-       wget build-essential cmake git \
+    python3.11 python3.11-dev \
+    wget build-essential cmake git \
     && rm -rf /var/lib/apt/lists/*
 
-# Ensure python3 defaults to python3.9
-RUN update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.9 1
+# Ensure python3 defaults to python3.11
+RUN update-alternatives --install /usr/bin/python3 python3 /usr/bin/python3.11 1
 
 RUN wget -q https://bootstrap.pypa.io/get-pip.py -O get-pip.py \
     && python3 get-pip.py "pip"
 
-
 FROM build-wheels AS trt-wheels
 ARG DEBIAN_FRONTEND
 ARG TARGETARCH
@@ -41,7 +46,12 @@ RUN --mount=type=bind,source=docker/tensorrt/detector/build_python_tensorrt.sh,t
     && TENSORRT_VER=$(cat /etc/TENSORRT_VER) /deps/build_python_tensorrt.sh
 
 COPY docker/tensorrt/requirements-arm64.txt /requirements-tensorrt.txt
-RUN pip3 wheel --wheel-dir=/trt-wheels -r /requirements-tensorrt.txt
+# See https://elinux.org/Jetson_Zoo#ONNX_Runtime
+ADD https://nvidia.box.com/shared/static/9yvw05k6u343qfnkhdv2x6xhygze0aq1.whl /tmp/onnxruntime_gpu-1.19.0-cp311-cp311-linux_aarch64.whl
+
+RUN pip3 uninstall -y onnxruntime-openvino \
+    && pip3 wheel --wheel-dir=/trt-wheels -r /requirements-tensorrt.txt \
+    && pip3 install --no-deps /tmp/onnxruntime_gpu-1.19.0-cp311-cp311-linux_aarch64.whl
 
 FROM build-wheels AS trt-model-wheels
 ARG DEBIAN_FRONTEND
@@ -63,11 +73,21 @@ RUN --mount=type=bind,source=docker/tensorrt/build_jetson_ffmpeg.sh,target=/deps
 # Frigate w/ TensorRT for NVIDIA Jetson platforms
 FROM tensorrt-base AS frigate-tensorrt
 RUN apt-get update \
-    && apt-get install -y python-is-python3 libprotobuf17  \
+    && apt-get install -y python-is-python3 libprotobuf23  \
     && rm -rf /var/lib/apt/lists/*
 
-RUN rm -rf /usr/lib/btbn-ffmpeg/
 COPY --from=jetson-ffmpeg /rootfs /
+ENV DEFAULT_FFMPEG_VERSION="jetson"
+ENV INCLUDED_FFMPEG_VERSIONS="${DEFAULT_FFMPEG_VERSION}:${INCLUDED_FFMPEG_VERSIONS}"
+
+# ffmpeg runtime dependencies
+RUN apt-get -qq update \
+    && apt-get -qq install -y --no-install-recommends \
+    libx264-163 libx265-199 libegl1 \
+    && rm -rf /var/lib/apt/lists/*
+
+# Fixes "Error loading shared libs"
+RUN mkdir -p /etc/ld.so.conf.d && echo /usr/lib/ffmpeg/jetson/lib/ > /etc/ld.so.conf.d/ffmpeg.conf
 
 COPY --from=trt-wheels /etc/TENSORRT_VER /etc/TENSORRT_VER
 RUN --mount=type=bind,from=trt-wheels,source=/trt-wheels,target=/deps/trt-wheels \
@@ -77,3 +97,6 @@ RUN --mount=type=bind,from=trt-wheels,source=/trt-wheels,target=/deps/trt-wheels
 
 WORKDIR /opt/frigate/
 COPY --from=rootfs / /
+
+# Fixes "Error importing detector runtime: /usr/lib/aarch64-linux-gnu/libstdc++.so.6: cannot allocate memory in static TLS block"
+ENV LD_PRELOAD /usr/lib/aarch64-linux-gnu/libstdc++.so.6

docker/tensorrt/Dockerfile.base

@@ -3,11 +3,12 @@
 # https://askubuntu.com/questions/972516/debian-frontend-environment-variable
 ARG DEBIAN_FRONTEND=noninteractive
 
-ARG TRT_BASE=nvcr.io/nvidia/tensorrt:23.03-py3
+ARG TRT_BASE=nvcr.io/nvidia/tensorrt:23.12-py3
 
 # Build TensorRT-specific library
 FROM ${TRT_BASE} AS trt-deps
 
+ARG TARGETARCH
 ARG COMPUTE_LEVEL
 
 RUN apt-get update \
@@ -16,16 +17,28 @@ RUN apt-get update \
 RUN --mount=type=bind,source=docker/tensorrt/detector/tensorrt_libyolo.sh,target=/tensorrt_libyolo.sh \
     /tensorrt_libyolo.sh
 
+# COPY required individual CUDA deps
+RUN mkdir -p /usr/local/cuda-deps
+RUN if [ "$TARGETARCH" = "amd64" ]; then \
+      cp /usr/local/cuda-12.3/targets/x86_64-linux/lib/libcurand.so.* /usr/local/cuda-deps/ && \
+      cp /usr/local/cuda-12.3/targets/x86_64-linux/lib/libnvrtc.so.* /usr/local/cuda-deps/ ; \
+    fi
+
 # Frigate w/ TensorRT Support as separate image
 FROM deps AS tensorrt-base
 
 #Disable S6 Global timeout
 ENV S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0
 
+# COPY TensorRT Model Generation Deps
 COPY --from=trt-deps /usr/local/lib/libyolo_layer.so /usr/local/lib/libyolo_layer.so
 COPY --from=trt-deps /usr/local/src/tensorrt_demos /usr/local/src/tensorrt_demos
+
+# COPY Individual CUDA deps folder
+COPY --from=trt-deps /usr/local/cuda-deps /usr/local/cuda
+
 COPY docker/tensorrt/detector/rootfs/ /
-ENV YOLO_MODELS="yolov7-320"
+ENV YOLO_MODELS=""
 
 HEALTHCHECK --start-period=600s --start-interval=5s --interval=15s --timeout=5s --retries=3 \
     CMD curl --fail --silent --show-error http://127.0.0.1:5000/api/version || exit 1

docker/tensorrt/build_jetson_ffmpeg.sh

@@ -5,7 +5,7 @@
 
 set -euxo pipefail
 
-INSTALL_PREFIX=/rootfs/usr/local
+INSTALL_PREFIX=/rootfs/usr/lib/ffmpeg/jetson
 
 apt-get -qq update
 apt-get -qq install -y --no-install-recommends build-essential ccache clang cmake pkg-config
@@ -14,14 +14,27 @@ apt-get -qq install -y --no-install-recommends libx264-dev libx265-dev
 pushd /tmp
 
 # Install libnvmpi to enable nvmpi decoders (h264_nvmpi, hevc_nvmpi)
-if [ -e /usr/local/cuda-10.2 ]; then
+if [ -e /usr/local/cuda-12 ]; then
+    # assume Jetpack 6.2
+    apt-key adv --fetch-key https://repo.download.nvidia.com/jetson/jetson-ota-public.asc
+    echo "deb https://repo.download.nvidia.com/jetson/common r36.4 main" >> /etc/apt/sources.list.d/nvidia-l4t-apt-source.list
+    echo "deb https://repo.download.nvidia.com/jetson/t234 r36.4 main" >> /etc/apt/sources.list.d/nvidia-l4t-apt-source.list
+    echo "deb https://repo.download.nvidia.com/jetson/ffmpeg r36.4 main" >> /etc/apt/sources.list.d/nvidia-l4t-apt-source.list
+
+    mkdir -p /opt/nvidia/l4t-packages/
+    touch /opt/nvidia/l4t-packages/.nv-l4t-disable-boot-fw-update-in-preinstall
+
+    apt-get update
+    apt-get -qq install -y --no-install-recommends -o Dpkg::Options::="--force-confold" nvidia-l4t-jetson-multimedia-api
+elif [ -e /usr/local/cuda-10.2 ]; then
     # assume Jetpack 4.X
     wget -q https://developer.nvidia.com/embedded/L4T/r32_Release_v5.0/T186/Jetson_Multimedia_API_R32.5.0_aarch64.tbz2 -O jetson_multimedia_api.tbz2
+    tar xaf jetson_multimedia_api.tbz2 -C / && rm jetson_multimedia_api.tbz2
 else
     # assume Jetpack 5.X
     wget -q https://developer.nvidia.com/downloads/embedded/l4t/r35_release_v3.1/release/jetson_multimedia_api_r35.3.1_aarch64.tbz2 -O jetson_multimedia_api.tbz2
+    tar xaf jetson_multimedia_api.tbz2 -C / && rm jetson_multimedia_api.tbz2
 fi
-tar xaf jetson_multimedia_api.tbz2 -C / && rm jetson_multimedia_api.tbz2
 
 wget -q https://github.com/AndBobsYourUncle/jetson-ffmpeg/archive/9c17b09.zip -O jetson-ffmpeg.zip
 unzip jetson-ffmpeg.zip && rm jetson-ffmpeg.zip && mv jetson-ffmpeg-* jetson-ffmpeg && cd jetson-ffmpeg

docker/tensorrt/detector/build_python_tensorrt.sh

@@ -6,23 +6,23 @@ mkdir -p /trt-wheels
 
 if [[ "${TARGETARCH}" == "arm64" ]]; then
 
-  # NVIDIA supplies python-tensorrt for python3.8, but frigate uses python3.9,
+  # NVIDIA supplies python-tensorrt for python3.10, but frigate uses python3.11,
   # so we must build python-tensorrt ourselves.
 
   # Get python-tensorrt source
-  mkdir /workspace
+  mkdir -p /workspace
   cd /workspace
-  git clone -b ${TENSORRT_VER} https://github.com/NVIDIA/TensorRT.git --depth=1
+  git clone -b release/8.6 https://github.com/NVIDIA/TensorRT.git --depth=1
 
   # Collect dependencies
   EXT_PATH=/workspace/external && mkdir -p $EXT_PATH
-  pip3 install pybind11 && ln -s /usr/local/lib/python3.9/dist-packages/pybind11 $EXT_PATH/pybind11
-  ln -s /usr/include/python3.9 $EXT_PATH/python3.9
+  pip3 install pybind11 && ln -s /usr/local/lib/python3.11/dist-packages/pybind11 $EXT_PATH/pybind11
+  ln -s /usr/include/python3.11 $EXT_PATH/python3.11
   ln -s /usr/include/aarch64-linux-gnu/NvOnnxParser.h /workspace/TensorRT/parsers/onnx/
 
   # Build wheel
   cd /workspace/TensorRT/python
-  EXT_PATH=$EXT_PATH PYTHON_MAJOR_VERSION=3 PYTHON_MINOR_VERSION=9 TARGET_ARCHITECTURE=aarch64 /bin/bash ./build.sh
-  mv build/dist/*.whl /trt-wheels/
+  EXT_PATH=$EXT_PATH PYTHON_MAJOR_VERSION=3 PYTHON_MINOR_VERSION=11 TARGET_ARCHITECTURE=aarch64 TENSORRT_MODULE=tensorrt /bin/bash ./build.sh
+  mv build/bindings_wheel/dist/*.whl /trt-wheels/
 
 fi

docker/tensorrt/detector/rootfs/etc/ld.so.conf.d/cuda_tensorrt.conf

@@ -1,6 +1,8 @@
 /usr/local/lib
-/usr/local/lib/python3.9/dist-packages/nvidia/cudnn/lib
-/usr/local/lib/python3.9/dist-packages/nvidia/cuda_runtime/lib
-/usr/local/lib/python3.9/dist-packages/nvidia/cublas/lib
-/usr/local/lib/python3.9/dist-packages/nvidia/cuda_nvrtc/lib
-/usr/local/lib/python3.9/dist-packages/tensorrt
+/usr/local/cuda
+/usr/local/lib/python3.11/dist-packages/nvidia/cudnn/lib
+/usr/local/lib/python3.11/dist-packages/nvidia/cuda_runtime/lib
+/usr/local/lib/python3.11/dist-packages/nvidia/cublas/lib
+/usr/local/lib/python3.11/dist-packages/nvidia/cuda_nvrtc/lib
+/usr/local/lib/python3.11/dist-packages/tensorrt
+/usr/local/lib/python3.11/dist-packages/nvidia/cufft/lib

docker/tensorrt/detector/rootfs/etc/s6-overlay/s6-rc.d/trt-model-prepare/run

@@ -11,6 +11,7 @@ set -o errexit -o nounset -o pipefail
 MODEL_CACHE_DIR=${MODEL_CACHE_DIR:-"/config/model_cache/tensorrt"}
 TRT_VER=${TRT_VER:-$(cat /etc/TENSORRT_VER)}
 OUTPUT_FOLDER="${MODEL_CACHE_DIR}/${TRT_VER}"
+YOLO_MODELS=${YOLO_MODELS:-""}
 
 # Create output folder
 mkdir -p ${OUTPUT_FOLDER}
@@ -19,6 +20,11 @@ FIRST_MODEL=true
 MODEL_DOWNLOAD=""
 MODEL_CONVERT=""
 
+if [ -z "$YOLO_MODELS" ]; then
+    echo "tensorrt model preparation disabled"
+    exit 0
+fi
+
 for model in ${YOLO_MODELS//,/ }
 do
     # Remove old link in case path/version changed
@@ -58,7 +64,7 @@ fi
 # order to run libyolo here.
 # On Jetpack 5.0, these libraries are not mounted by the runtime and are supplied by the image.
 if [[ "$(arch)" == "aarch64" ]]; then
-    if [[ ! -e /usr/lib/aarch64-linux-gnu/tegra ]]; then
+    if [[ ! -e /usr/lib/aarch64-linux-gnu/tegra && ! -e /usr/lib/aarch64-linux-gnu/tegra-egl ]]; then
         echo "ERROR: Container must be launched with nvidia runtime"
         exit 1
     elif [[ ! -e /usr/lib/aarch64-linux-gnu/libnvinfer.so.8 ||

docker/tensorrt/requirements-amd64.txt

@@ -1,12 +1,17 @@
 # NVidia TensorRT Support (amd64 only)
 --extra-index-url 'https://pypi.nvidia.com'
 numpy < 1.24; platform_machine == 'x86_64'
-tensorrt == 8.5.3.*; platform_machine == 'x86_64'
-cuda-python == 11.8; platform_machine == 'x86_64'
-cython == 0.29.*; platform_machine == 'x86_64'
+tensorrt == 8.6.1; platform_machine == 'x86_64'
+tensorrt_bindings == 8.6.1; platform_machine == 'x86_64'
+cuda-python == 11.8.*; platform_machine == 'x86_64'
+cython == 3.0.*; platform_machine == 'x86_64'
 nvidia-cuda-runtime-cu12 == 12.1.*; platform_machine == 'x86_64'
 nvidia-cuda-runtime-cu11 == 11.8.*; platform_machine == 'x86_64'
 nvidia-cublas-cu11 == 11.11.3.6; platform_machine == 'x86_64'
 nvidia-cudnn-cu11 == 8.6.0.*; platform_machine == 'x86_64'
-onnx==1.14.0; platform_machine == 'x86_64'
+nvidia-cudnn-cu12 == 9.5.0.*; platform_machine == 'x86_64'
+nvidia-cufft-cu11==10.*; platform_machine == 'x86_64'
+nvidia-cufft-cu12==11.*; platform_machine == 'x86_64'
+onnx==1.16.*; platform_machine == 'x86_64'
+onnxruntime-gpu==1.20.*; platform_machine == 'x86_64'
 protobuf==3.20.3; platform_machine == 'x86_64'

docker/tensorrt/requirements-arm64.txt

@@ -1 +1 @@
-cuda-python == 11.7; platform_machine == 'aarch64'
+cuda-python == 12.6.*; platform_machine == 'aarch64'

docker/tensorrt/trt.hcl

@@ -13,13 +13,29 @@ variable "TRT_BASE" {
 variable "COMPUTE_LEVEL" {
   default = ""
 }
+variable "BASE_HOOK" {
+  # Ensure an up-to-date python 3.11 is available in jetson images
+  default = <<EOT
+if grep -iq \"ubuntu\" /etc/os-release; then
+  . /etc/os-release
+
+  # Add the deadsnakes PPA repository
+  echo "deb https://ppa.launchpadcontent.net/deadsnakes/ppa/ubuntu $VERSION_CODENAME main" >> /etc/apt/sources.list.d/deadsnakes.list
+  echo "deb-src https://ppa.launchpadcontent.net/deadsnakes/ppa/ubuntu $VERSION_CODENAME main" >> /etc/apt/sources.list.d/deadsnakes.list
+
+  # Add deadsnakes signing key
+  apt-key adv --keyserver keyserver.ubuntu.com --recv-keys F23C5A6CF475977595C89F51BA6932366A755776
+fi
+EOT
+}
 
 target "_build_args" {
   args = {
     BASE_IMAGE = BASE_IMAGE,
     SLIM_BASE = SLIM_BASE,
     TRT_BASE = TRT_BASE,
-    COMPUTE_LEVEL = COMPUTE_LEVEL
+    COMPUTE_LEVEL = COMPUTE_LEVEL,
+    BASE_HOOK = BASE_HOOK
   }
   platforms = ["linux/${ARCH}"]
 }
@@ -79,7 +95,6 @@ target "tensorrt" {
     wget = "target:wget",
     tensorrt-base = "target:tensorrt-base",
     rootfs = "target:rootfs"
-    wheels = "target:wheels"
   }
   target = "frigate-tensorrt"
   inherits = ["_build_args"]

docker/tensorrt/trt.mk

@@ -1,26 +1,41 @@
 BOARDS += trt
 
-JETPACK4_BASE ?= timongentzsch/l4t-ubuntu20-opencv:latest	# L4T 32.7.1 JetPack 4.6.1
 JETPACK5_BASE ?= nvcr.io/nvidia/l4t-tensorrt:r8.5.2-runtime	# L4T 35.3.1 JetPack 5.1.1
+JETPACK6_BASE ?= nvcr.io/nvidia/tensorrt:23.12-py3-igpu
 X86_DGPU_ARGS := ARCH=amd64 COMPUTE_LEVEL="50 60 70 80 90"
-JETPACK4_ARGS := ARCH=arm64 BASE_IMAGE=$(JETPACK4_BASE) SLIM_BASE=$(JETPACK4_BASE) TRT_BASE=$(JETPACK4_BASE)
 JETPACK5_ARGS := ARCH=arm64 BASE_IMAGE=$(JETPACK5_BASE) SLIM_BASE=$(JETPACK5_BASE) TRT_BASE=$(JETPACK5_BASE)
+JETPACK6_ARGS := ARCH=arm64 BASE_IMAGE=$(JETPACK6_BASE) SLIM_BASE=$(JETPACK6_BASE) TRT_BASE=$(JETPACK6_BASE)
 
 local-trt: version
-	$(X86_DGPU_ARGS) docker buildx bake --load --file=docker/tensorrt/trt.hcl --set tensorrt.tags=frigate:latest-tensorrt tensorrt
-
-local-trt-jp4: version
-	$(JETPACK4_ARGS) docker buildx bake --load --file=docker/tensorrt/trt.hcl --set tensorrt.tags=frigate:latest-tensorrt-jp4 tensorrt
+	$(X86_DGPU_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl tensorrt \
+		--set tensorrt.tags=frigate:latest-tensorrt \
+		--load
 
 local-trt-jp5: version
-	$(JETPACK5_ARGS) docker buildx bake --load --file=docker/tensorrt/trt.hcl --set tensorrt.tags=frigate:latest-tensorrt-jp5 tensorrt
+	$(JETPACK5_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl tensorrt \
+		--set tensorrt.tags=frigate:latest-tensorrt-jp5 \
+		--load
+
+local-trt-jp6: version
+	$(JETPACK6_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl tensorrt \
+		--set tensorrt.tags=frigate:latest-tensorrt-jp6 \
+		--load
 
 build-trt:
-	$(X86_DGPU_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl --set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt tensorrt
-	$(JETPACK4_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl --set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt-jp4 tensorrt
-	$(JETPACK5_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl --set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt-jp5 tensorrt
+	$(X86_DGPU_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl tensorrt \
+		--set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt
+	$(JETPACK5_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl tensorrt \
+		--set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt-jp5
+	$(JETPACK6_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl tensorrt \
+		--set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt-jp6
 
 push-trt: build-trt
-	$(X86_DGPU_ARGS) docker buildx bake --push --file=docker/tensorrt/trt.hcl --set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt tensorrt
-	$(JETPACK4_ARGS) docker buildx bake --push --file=docker/tensorrt/trt.hcl --set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt-jp4 tensorrt
-	$(JETPACK5_ARGS) docker buildx bake --push --file=docker/tensorrt/trt.hcl --set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt-jp5 tensorrt
+	$(X86_DGPU_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl tensorrt \
+		--set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt \
+		--push
+	$(JETPACK5_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl tensorrt \
+		--set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt-jp5 \
+		--push
+	$(JETPACK6_ARGS) docker buildx bake --file=docker/tensorrt/trt.hcl tensorrt \
+		--set tensorrt.tags=$(IMAGE_REPO):${GITHUB_REF_NAME}-$(COMMIT_HASH)-tensorrt-jp6 \
+		--push

docs/README.md

@@ -1,5 +1,10 @@
 # Website
 
-This website is built using [Docusaurus 2](https://v2.docusaurus.io/), a modern static website generator.
+This website is built using [Docusaurus 3.5](https://docusaurus.io/docs), a modern static website generator.
 
 For installation and contributing instructions, please follow the [Contributing Docs](https://docs.frigate.video/development/contributing).
+
+# Development
+
+1. Run `npm i` to install dependencies
+2. Run `npm run start` to start the website

docs/docs/configuration/advanced.md

@@ -4,7 +4,9 @@ title: Advanced Options
 sidebar_label: Advanced Options
 ---
 
-### `logger`
+### Logging
+
+#### Frigate `logger`
 
 Change the default log level for troubleshooting purposes.
 
@@ -28,6 +30,18 @@ Examples of available modules are:
 - `watchdog.<camera_name>`
 - `ffmpeg.<camera_name>.<sorted_roles>` NOTE: All FFmpeg logs are sent as `error` level.
 
+#### Go2RTC Logging
+
+See [the go2rtc docs](https://github.com/AlexxIT/go2rtc?tab=readme-ov-file#module-log) for logging configuration
+
+```yaml
+go2rtc:
+  streams:
+    # ...
+  log:
+    exec: trace
+```
+
 ### `environment_vars`
 
 This section can be used to set environment variables for those unable to modify the environment of the container (ie. within HassOS)
@@ -41,7 +55,7 @@ environment_vars:
 
 ### `database`
 
-Event and recording information is managed in a sqlite database at `/config/frigate.db`. If that database is deleted, recordings will be orphaned and will need to be cleaned up manually. They also won't show up in the Media Browser within Home Assistant.
+Tracked object and recording information is managed in a sqlite database at `/config/frigate.db`. If that database is deleted, recordings will be orphaned and will need to be cleaned up manually. They also won't show up in the Media Browser within Home Assistant.
 
 If you are storing your database on a network share (SMB, NFS, etc), you may get a `database is locked` error message on startup. You can customize the location of the database in the config if necessary.
 
@@ -162,43 +176,41 @@ listen [::]:5000 ipv6only=off;
 
 ### Custom ffmpeg build
 
-Included with Frigate is a build of ffmpeg that works for the vast majority of users. However, there exists some hardware setups which have incompatibilities with the included build. In this case, a docker volume mapping can be used to overwrite the included ffmpeg build with an ffmpeg build that works for your specific hardware setup.
+Included with Frigate is a build of ffmpeg that works for the vast majority of users. However, there exists some hardware setups which have incompatibilities with the included build. In this case, statically built `ffmpeg` and `ffprobe` binaries can be placed in `/config/custom-ffmpeg/bin` for Frigate to use.
 
 To do this:
 
-1. Download your ffmpeg build and uncompress to a folder on the host (let's use `/home/appdata/frigate/custom-ffmpeg` for this example).
-2. Update your docker-compose or docker CLI to include `'/home/appdata/frigate/custom-ffmpeg':'/usr/lib/btbn-ffmpeg':'ro'` in the volume mappings.
-3. Restart Frigate and the custom version will be used if the mapping was done correctly.
-
-NOTE: The folder that is mapped from the host needs to be the folder that contains `/bin`. So if the full structure is `/home/appdata/frigate/custom-ffmpeg/bin/ffmpeg` then `/home/appdata/frigate/custom-ffmpeg` needs to be mapped to `/usr/lib/btbn-ffmpeg`.
+1. Download your ffmpeg build and uncompress it to the `/config/custom-ffmpeg` folder. Verify that both the `ffmpeg` and `ffprobe` binaries are located in `/config/custom-ffmpeg/bin`.
+2. Update the `ffmpeg.path` in your Frigate config to `/config/custom-ffmpeg`.
+3. Restart Frigate and the custom version will be used if the steps above were done correctly.
 
 ### Custom go2rtc version
 
-Frigate currently includes go2rtc v1.9.4, there may be certain cases where you want to run a different version of go2rtc.
+Frigate currently includes go2rtc v1.9.2, there may be certain cases where you want to run a different version of go2rtc.
 
 To do this:
 
-1. Download the go2rtc build to the /config folder.
+1. Download the go2rtc build to the `/config` folder.
 2. Rename the build to `go2rtc`.
 3. Give `go2rtc` execute permission.
 4. Restart Frigate and the custom version will be used, you can verify by checking go2rtc logs.
 
-## Validating your config.yaml file updates
+## Validating your config.yml file updates
 
 When frigate starts up, it checks whether your config file is valid, and if it is not, the process exits. To minimize interruptions when updating your config, you have three options -- you can edit the config via the WebUI which has built in validation, use the config API, or you can validate on the command line using the frigate docker container.
 
 ### Via API
 
-Frigate can accept a new configuration file as JSON at the `/config/save` endpoint. When updating the config this way, Frigate will validate the config before saving it, and return a `400` if the config is not valid.
+Frigate can accept a new configuration file as JSON at the `/api/config/save` endpoint. When updating the config this way, Frigate will validate the config before saving it, and return a `400` if the config is not valid.
 
 ```bash
-curl -X POST http://frigate_host:5000/config/save -d @config.json
+curl -X POST http://frigate_host:5000/api/config/save -d @config.json
 ```
 
 if you'd like you can use your yaml config directly by using [`yq`](https://github.com/mikefarah/yq) to convert it to json:
 
 ```bash
-yq r -j config.yml | curl -X POST http://frigate_host:5000/config/save -d @-
+yq r -j config.yml | curl -X POST http://frigate_host:5000/api/config/save -d @-
 ```
 
 ### Via Command Line
@@ -211,5 +223,5 @@ docker run                                \
   --entrypoint python3                    \
   ghcr.io/blakeblackshear/frigate:stable  \
   -u -m frigate                           \
-  --validate_config
+  --validate-config
 ```

docs/docs/configuration/authentication.md

@@ -24,9 +24,14 @@ On startup, an admin user and password are generated and printed in the logs. It
 
 In the event that you are locked out of your instance, you can tell Frigate to reset the admin password and print it in the logs on next startup using the `reset_admin_password` setting in your config file.
 
+```yaml
+auth:
+  reset_admin_password: true
+```
+
 ## Login failure rate limiting
 
-In order to limit the risk of brute force attacks, rate limiting is available for login failures. This is implemented with Flask-Limiter, and the string notation for valid values is available in [the documentation](https://flask-limiter.readthedocs.io/en/stable/configuration.html#rate-limit-string-notation).
+In order to limit the risk of brute force attacks, rate limiting is available for login failures. This is implemented with SlowApi, and the string notation for valid values is available in [the documentation](https://limits.readthedocs.io/en/stable/quickstart.html#examples).
 
 For example, `1/second;5/minute;20/hour` will rate limit the login endpoint when failures occur more than:
 
@@ -92,15 +97,35 @@ python3 -c 'import secrets; print(secrets.token_hex(64))'
 
 ### Header mapping
 
-If you have disabled Frigate's authentication and your proxy supports passing a header with the authenticated username, you can use the `header_map` config to specify the header name so it is passed to Frigate. For example, the following will map the `X-Forwarded-User` value. Header names are not case sensitive.
+If you have disabled Frigate's authentication and your proxy supports passing a header with authenticated usernames and/or roles, you can use the `header_map` config to specify the header name so it is passed to Frigate. For example, the following will map the `X-Forwarded-User` and `X-Forwarded-Role` values. Header names are not case sensitive.
 
 ```yaml
 proxy:
   ...
   header_map:
     user: x-forwarded-user
+    role: x-forwarded-role
 ```
 
+Frigate supports both `admin` and `viewer` roles (see below). When using port `8971`, Frigate validates these headers and subsequent requests use the headers `remote-user` and `remote-role` for authorization.
+
+#### Port Considerations
+
+**Authenticated Port (8971)**
+
+- Header mapping is **fully supported**.
+- The `remote-role` header determines the user’s privileges:
+  - **admin** → Full access (user management, configuration changes).
+  - **viewer** → Read-only access.
+- Ensure your **proxy sends both user and role headers** for proper role enforcement.
+
+**Unauthenticated Port (5000)**
+
+- Headers are **ignored** for role enforcement.
+- All requests are treated as **anonymous**.
+- The `remote-role` value is **overridden** to **admin-level access**.
+- This design ensures **unauthenticated internal use** within a trusted network.
+
 Note that only the following list of headers are permitted by default:
 
 ```
@@ -121,8 +146,6 @@ X-authentik-uid
 
 If you would like to add more options, you can overwrite the default file with a docker bind mount at `/usr/local/nginx/conf/proxy_trusted_headers.conf`. Reference the source code for the default file formatting.
 
-Future versions of Frigate may leverage group and role headers for authorization in Frigate as well.
-
 ### Login page redirection
 
 Frigate gracefully performs login page redirection that should work with most authentication proxies. If your reverse proxy returns a `Location` header on `401`, `302`, or `307` unauthorized responses, Frigate's frontend will automatically detect it and redirect to that URL.
@@ -130,3 +153,31 @@ Frigate gracefully performs login page redirection that should work with most au
 ### Custom logout url
 
 If your reverse proxy has a dedicated logout url, you can specify using the `logout_url` config option. This will update the link for the `Logout` link in the UI.
+
+## User Roles
+
+Frigate supports user roles to control access to certain features in the UI and API, such as managing users or modifying configuration settings. Roles are assigned to users in the database or through proxy headers and are enforced when accessing the UI or API through the authenticated port (`8971`).
+
+### Supported Roles
+
+- **admin**: Full access to all features, including user management and configuration.
+- **viewer**: Read-only access to the UI and API, including viewing cameras, review items, and historical footage. Configuration editor and settings in the UI are inaccessible.
+
+### Role Enforcement
+
+When using the authenticated port (`8971`), roles are validated via the JWT token or proxy headers (e.g., `remote-role`).
+
+On the internal **unauthenticated** port (`5000`), roles are **not enforced**. All requests are treated as **anonymous**, granting access equivalent to the **admin** role without restrictions.
+
+To use role-based access control, you must connect to Frigate via the **authenticated port (`8971`)** directly or through a reverse proxy.
+
+### Role Visibility in the UI
+
+- When logged in via port `8971`, your **username and role** are displayed in the **account menu** (bottom corner).
+- When using port `5000`, the UI will always display "anonymous" for the username and "admin" for the role.
+
+### Managing User Roles
+
+1. Log in as an **admin** user via port `8971`.
+2. Navigate to **Settings > Users**.
+3. Edit a user’s role by selecting **admin** or **viewer**.

docs/docs/configuration/autotracking.md

@@ -41,6 +41,7 @@ cameras:
     ...
     onvif:
       # Required: host of the camera being connected to.
+      # NOTE: HTTP is assumed by default; HTTPS is supported if you specify the scheme, ex: "https://0.0.0.0".
       host: 0.0.0.0
       # Optional: ONVIF port for device (default: shown below).
       port: 8000
@@ -49,6 +50,8 @@ cameras:
       user: admin
       # Optional: password for login.
       password: admin
+      # Optional: Skip TLS verification from the ONVIF server (default: shown below)
+      tls_insecure: False
       # Optional: PTZ camera object autotracking. Keeps a moving object in
       # the center of the frame by automatically moving the PTZ camera.
       autotracking:
@@ -164,3 +167,7 @@ To maintain object tracking during PTZ moves, Frigate tracks the motion of your
 ### Calibration seems to have completed, but the camera is not actually moving to track my object. Why?
 
 Some cameras have firmware that reports that FOV RelativeMove, the ONVIF command that Frigate uses for autotracking, is supported. However, if the camera does not pan or tilt when an object comes into the required zone, your camera's firmware does not actually support FOV RelativeMove. One such camera is the Uniview IPC672LR-AX4DUPK. It actually moves its zoom motor instead of panning and tilting and does not follow the ONVIF standard whatsoever.
+
+### Frigate reports an error saying that calibration has failed. Why?
+
+Calibration measures the amount of time it takes for Frigate to make a series of movements with your PTZ. This error message is recorded in the log if these values are too high for Frigate to support calibrated autotracking. This is often the case when your camera's motor or network connection is too slow or your camera's firmware doesn't report the motor status in a timely manner. You can try running without calibration (just remove the `movement_weights` line from your config and restart), but if calibration fails, this often means that autotracking will behave unpredictably.

docs/docs/configuration/camera_specific.md

@@ -9,6 +9,12 @@ This page makes use of presets of FFmpeg args. For more information on presets,
 
 :::
 
+:::note
+
+Many cameras support encoding options which greatly affect the live view experience, see the [Live view](/configuration/live) page for more info.
+
+:::
+
 ## MJPEG Cameras
 
 Note that mjpeg cameras require encoding the video into h264 for recording, and restream roles. This will use significantly more CPU than if the cameras supported h264 feeds directly. It is recommended to use the restream role to create an h264 restream and then use that as the source for ffmpeg.
@@ -16,7 +22,7 @@ Note that mjpeg cameras require encoding the video into h264 for recording, and
 ```yaml
 go2rtc:
   streams:
-    mjpeg_cam: "ffmpeg:{your_mjpeg_stream_url}#video=h264#hardware" # <- use hardware acceleration to create an h264 stream usable for other components.
+    mjpeg_cam: "ffmpeg:http://your_mjpeg_stream_url#video=h264#hardware" # <- use hardware acceleration to create an h264 stream usable for other components.
 
 cameras:
   ...
@@ -59,19 +65,32 @@ ffmpeg:
 
 ## Model/vendor specific setup
 
+### Amcrest & Dahua
+
+Amcrest & Dahua cameras should be connected to via RTSP using the following format:
+
+```
+rtsp://USERNAME:PASSWORD@CAMERA-IP/cam/realmonitor?channel=1&subtype=0 # this is the main stream
+rtsp://USERNAME:PASSWORD@CAMERA-IP/cam/realmonitor?channel=1&subtype=1 # this is the sub stream, typically supporting low resolutions only
+rtsp://USERNAME:PASSWORD@CAMERA-IP/cam/realmonitor?channel=1&subtype=2 # higher end cameras support a third stream with a mid resolution (1280x720, 1920x1080)
+rtsp://USERNAME:PASSWORD@CAMERA-IP/cam/realmonitor?channel=1&subtype=3 # new higher end cameras support a fourth stream with another mid resolution (1280x720, 1920x1080)
+
+```
+
 ### Annke C800
 
-This camera is H.265 only. To be able to play clips on some devices (like MacOs or iPhone) the H.265 stream has to be repackaged and the audio stream has to be converted to aac. Unfortunately direct playback of in the browser is not working (yet), but the downloaded clip can be played locally.
+This camera is H.265 only. To be able to play clips on some devices (like MacOs or iPhone) the H.265 stream has to be adjusted using the `apple_compatibility` config.
 
 ```yaml
 cameras:
   annkec800: # <------ Name the camera
     ffmpeg:
+      apple_compatibility: true # <- Adds compatibility with MacOS and iPhone
       output_args:
-        record: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c:v copy -tag:v hvc1 -bsf:v hevc_mp4toannexb -c:a aac
+        record: preset-record-generic-audio-aac
 
       inputs:
-        - path: rtsp://user:password@camera-ip:554/H264/ch1/main/av_stream # <----- Update for your camera
+        - path: rtsp://USERNAME:PASSWORD@CAMERA-IP/H264/ch1/main/av_stream # <----- Update for your camera
           roles:
             - detect
             - record
@@ -89,6 +108,29 @@ ffmpeg:
   input_args: preset-rtsp-blue-iris
 ```
 
+### Hikvision Cameras
+
+Hikvision cameras should be connected to via RTSP using the following format:
+
+```
+rtsp://USERNAME:PASSWORD@CAMERA-IP/streaming/channels/101 # this is the main stream
+rtsp://USERNAME:PASSWORD@CAMERA-IP/streaming/channels/102 # this is the sub stream, typically supporting low resolutions only
+rtsp://USERNAME:PASSWORD@CAMERA-IP/streaming/channels/103 # higher end cameras support a third stream with a mid resolution (1280x720, 1920x1080)
+```
+
+:::note
+
+[Some users have reported](https://www.reddit.com/r/frigate_nvr/comments/1hg4ze7/hikvision_security_settings) that newer Hikvision cameras require adjustments to the security settings:
+
+```
+RTSP Authentication - digest/basic
+RTSP Digest Algorithm - MD5
+WEB Authentication - digest/basic
+WEB Digest Algorithm  - MD5
+```
+
+:::
+
 ### Reolink Cameras
 
 Reolink has older cameras (ex: 410 & 520) as well as newer camera (ex: 520a & 511wa) which support different subsets of options. In both cases using the http stream is recommended.
@@ -150,7 +192,9 @@ cameras:
 
 #### Reolink Doorbell
 
-The reolink doorbell supports 2-way audio via go2rtc and other applications. It is important that the http-flv stream is still used for stability, a secondary rtsp stream can be added that will be using for the two way audio only.
+The reolink doorbell supports two way audio via go2rtc and other applications. It is important that the http-flv stream is still used for stability, a secondary rtsp stream can be added that will be using for the two way audio only.
+
+Ensure HTTP is enabled in the camera's advanced network settings. To use two way talk with Frigate, see the [Live view documentation](/configuration/live#two-way-talk).
 
 ```yaml
 go2rtc:
@@ -175,7 +219,7 @@ go2rtc:
       - rtspx://192.168.1.1:7441/abcdefghijk
 ```
 
-[See the go2rtc docs for more information](https://github.com/AlexxIT/go2rtc/tree/v1.9.4#source-rtsp)
+[See the go2rtc docs for more information](https://github.com/AlexxIT/go2rtc/tree/v1.9.2#source-rtsp)
 
 In the Unifi 2.0 update Unifi Protect Cameras had a change in audio sample rate which causes issues for ffmpeg. The input rate needs to be set for record if used directly with unifi protect.
 
@@ -187,4 +231,4 @@ ffmpeg:
 
 ### TP-Link VIGI Cameras
 
-TP-Link VIGI cameras need some adjustments to the main stream settings on the camera itself to avoid issues. The stream needs to be configured as `H264` with `Smart Coding` set to `off`. Without these settings you may have problems when trying to watch recorded events. For example Firefox will stop playback after a few seconds and show the following error message: `The media playback was aborted due to a corruption problem or because the media used features your browser did not support.`.
+TP-Link VIGI cameras need some adjustments to the main stream settings on the camera itself to avoid issues. The stream needs to be configured as `H264` with `Smart Coding` set to `off`. Without these settings you may have problems when trying to watch recorded footage. For example Firefox will stop playback after a few seconds and show the following error message: `The media playback was aborted due to a corruption problem or because the media used features your browser did not support.`.