1. add Mppdevctx to store some infos in every codec.
reason:each codec has its own unique characteristics.
2. add mpp_device_control interface for get or set ctx values.
reason:it simplity interface, which flexible, easy to use and versatile.
Change-Id: I56c9332768c86f62a3ca248ad254fba9e798c577
Signed-off-by: leo.ding <leo.ding@rock-chips.com>
H265E had defined in Cmakelist.txt to choose whether build
h265 encode module, so it here is redefined.
Change-Id: I54e9704d396d0a8a0e6d0f2ae8595d033131d81b
Signed-off-by: leo.ding <leo.ding@rock-chips.com>
Please notice that clock source is only confirm to work
on the currently Rockchip ARMv7/ARMv8 SoC.
You may meet problem with the other platform.
The time granularities is miliseconds level.
Change-Id: Icf56f88dd15045d7c899bdcfaf3637fab159b35a
Signed-off-by: ayaka <ayaka@soulik.info>
Signed-off-by: Randy Li <randy.li@rock-chips.com>
Reviewed-by: timkingh.huang <timkingh.huang@rock-chips.com>
When retrieving frames current API only allows to define wether
the API should block without any timeout or not block at all.
This allows to specify a block timeout via the
MPP_SET_OUTPUT_BLOCK_TIMEOUT control operation.
Change-Id: Id35ad3d48f72881184009f830c406c3a655e1a90
Signed-off-by: LongChair <LongChair@hotmail.com>
Signed-off-by: Randy Li <randy.li@rock-chips.com>
The thread status may be changed before mpp_port_dequeue,
so it is necessary to check it.
Change-Id: Ibe6f33cb7a5ac88bd93da3b0a15d9e0a271d825b
Signed-off-by: timkingh.huang <timkingh.huang@rock-chips.com>
1. Add video codec information and kernel driver device detection code for all
supported chips.
2. Add video codec type and device name detection test
Change-Id: I275c0e616acd80c9a4ad2fee00588479e47a92db
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
if outside doesn't set init qp value, mpp will estimate one init qp
according to resolution and bitrate.
Change-Id: If5415f6a3bfa3f2981ffd4eb044614bf9b035d2f
Signed-off-by: Jung Zhao <jung.zhao@rock-chips.com>
1. Interface change:
Separate normal config into three basic config and several runtime config:
Three basic config -
a. rate control config
b. preprocess config
c. video codec protocol config
More flexible rate control interfaces are provided.
More codec configure interfaces are provided.
Change flag with bitmap is provided for further optimization.
2. Remove old codec config from controller and left rate control module only
Encoder controller only handle user rate control requirement and bit allocation.
Hal hardware encoder only handle qp calculation according given target bit.
Remove all old codec code.
3. Move codec process to hal
Different hardware will share same codec process function in common protocol
directory. And different hardware api will register to same api set. Codec
header generation is moved to separate hal directory.
4. Encoder will return length by task
Encoder will NOT get stream information feedback from controller. All
information required by encoder will be all stored in Task.
5. Add mpp_rc for rate control
Move some common rate control utils to mpp_base.
6. Update mpi_enc_test and mpi_rc_test with new interface
Change-Id: Iebb5e276a48f547167e1bed4673f21cc2f0c8ad5
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
Signed-off-by: Lin Kesheng <lks@rock-chips.com>
Add caller parameter to all mpp_buffer functions.
Change-Id: Ibebd2a31b302988fe1ed480de575189ce57e41a5
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
1. read src frame with real width and height of picture,
rather than virtual ones.
2. configure correct hor_stride & ver_stride for hardware
3. support yuv420/420sp for mpi_enc_test demo and video
app, and is compatible for old interface
Change-Id: I1fc23dc2954577b28e25b80a4dcdd1536d45d622
Signed-off-by: Lin Kesheng <lks@rock-chips.com>
use fromdos to change file type, remove ^M in code.
Change-Id: I000202dc51fcff57cc0771455baebea595115b1d
Signed-off-by: Lin Kesheng <lks@rock-chips.com>
[hal_h264d] add on2 hard module, which all intra stream && AVC && seek are OK
[h264d_test] update the demo can be run and ouput raw yuv, which is right
[vpu_api] add AVC interface
[mpp_buf_slot] add a return variable value
[mpp_log] delete some marco define and put these to h264d_log.h
git-svn-id: https://10.10.10.66:8443/svn/MediaProcessPlatform/trunk/mpp@448 6e48237b-75ef-9749-8fc9-41990f28c85a
