Split output flag is for low delay packet output mode.
Change-Id: I2f743f14b89864625406ebf94687f4f838f0df15
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
vepu58x roi cfg generation is depended on vepu54x roi cfg.
1. Use roi_enable to enable roi test.
2. Use roi_type to test different roi config mode.
Old region mode is set to legacy now for future roi cfg will be more and
more complicated.
Change-Id: Ib9e8976b732f05625e7589b64752d38fbd83584b
Signed-off-by: sayon.chen <sayon.chen@rock-chips.com>
The roi structure on vepu580 is too complex.
So we provide provide a buffer tunnel for externl user to config encoder
hardware directly.
External user should generate roi data structure according to datasheet.
Then config the base_addr, qp_addr, amv_addr, pmv_addr by metadata.
Change-Id: Iae50bf3ca36c1ff789140055d4d36a79afeb2e58
Signed-off-by: sayon.chen <sayon.chen@rock-chips.com>
Some of NVR product may do some thing special when decoding the first
GOP of bitstream encoded by MPP, and report "gaps in frame_num is not
allowed" although frame_num is bitstream is continuous. Setting
gaps_in_frame_num_allowed_flag to true will avoid this problem.
1. Set gaps_in_frame_num_allowed_flag true as default
2. call mpp_enc_cfg_set_u32(cfg, "h264:gaps_not_allowed", 1) if you
want gaps_in_frame_num_allowed_flag to be false.
Change-Id: I8242fb318e051a61772c02a2c8bb59e4b589ff6d
Signed-off-by: Johnson Ding <johnson.ding@rock-chips.com>
1. Add rc:qp config for user rate control config at frame level.
2. Add hw:qp config for hardware detail config.
NOTE: hardware config is only recommended for expert developer.
Change-Id: I8e28de97304577bcf77d67521f945355779ae102
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
1. Restore max_qp_step which limit the qp change between two frames.
2. Set default H.265 ip_qp_delta to 5.
Change-Id: Iacd795da7f2df46e60ab3f5c45bc8b0f30aff5a5
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
1. Add new structure: MppEncOSDData2
2. Different osd layer use separate buffer
Signed-off-by: Yandong Lin <yandong.lin@rock-chips.com>
Change-Id: I3be533eb602f23192086f56e06a1439dbb19c35c
Separate H.264 QP limit change flag into 3 flags
Change-Id: I658ab337569f8f715bde7633dce02b631a7d4239
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
User data set is for multiple user data with uuid.
Change-Id: Iad952961ab6242ff3a14f554410144bebd3801ba
Signed-off-by: sayon.chen <sayon.chen@rock-chips.com>
1. Not do reencode in vp8 enc
2. Add api to control whether need to add ivf header
(default: have ivf header)
Signed-off-by: yandong.lin <yandong.lin@rock-chips.com>
Change-Id: I59a3a7193abead6c73e6e1eed593a115add77888
Add max_i_prop, min_i_prop and init_ip_ration for I frame tuning config.
max_i_prop:
The max percentage of intra frame size in one gop.
min_i_prop:
The min percentage of intra frame size in one gop.
init_ip_ration:
Define the first I frame size is how many times of one P frame size.
Set to 16 mean I frame size is equal to P frame size.
Set to 160 mean I frame size is 10 times of P frame size.
These three parameters are for tuning Intra frame quality.
Change-Id: Iac1e700fe2a51fb3a6ad94753784cd54ee789176
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
1. Add rk_venc_rc.h for rate control definitions.
2. Add drop parameter to set_rc_cfg.
Change-Id: Iab27a1505ba187f512815f7ab00cd0ea7f863cb8
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
when select avbr must set target_bps max_bps min_bps,in still scene
will used min_bps for enc, in the moving scene will max_bps for enc.
and final avg bit will get close to target_bps
Change-Id: I84b2878c7e76b18a593ca2a0d99c0c8f26a2d557
Signed-off-by: sayon.chen <sayon.chen@rock-chips.com>
Add frame drop parameters for frame drop behavior on bitrate overflow.
Change-Id: Id90fbd0c63b1a0909e426a2c9f09c8b371bec0b7
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
1. Remove slice mode/arg in H.264 codec cfg.
2. Add max long-term reference number / max temporal layer id / prefix
mode / base layer priority id.
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
Change-Id: If34166e4658edba65f4c6c095412a6fadd941320
New reference frame config interface will be added.
Change-Id: I5766cefde12237561bbc20c905e47ed2d3e90011
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
1. Change interface for adding color range to MppPrepCfg.
2. Add option in MppEncCfg.
3. Add H.264 / H.265 sps support on full / limit range.
IMPORTANT: the binary backward compatibility is broken since this commit.
Change-Id: Ib68f29bab5c6d364fe8b612bd4dff2ecd5bc59cd
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
When max_reenc_cnt is zero the reencode flow is disabled.
Change-Id: Iba600b37bb5ab6e4f720b652d59abfae36f9e52f
Signed-off-by: Herman Chen <herman.chen@rock-chips.com>
