Provide a debian folder to allow build of upstream package

distros/debian/README.source

@@ -0,0 +1,12 @@
+This package uses quilt to manage all modifications to the upstream source.
+Changes are stored in the source package as diffs in debian/patches and applied
+during the build.
+
+See /usr/share/doc/quilt/README.source for a detailed explanation.
+
+
+This package uses the version 3.0 of the debian source package; An upstream
+tarball is required to build it. This tarball can be generated automagically by
+downloading the sources from the github repository with the following command:
+
+fakeroot debian/rules get-orig-source

distros/debian/changelog

@@ -0,0 +1,9 @@
+openalpr (2.0.0-0.1) experimental; urgency=low
+
+  * Non maintainer upload.
+  * Upstream release with several fixes:
+    - Compilation of utilities enabled
+    - installation of static library
+    - alpr build against shared library
+
+ -- Emmanuel Papin <manupap01@gmail.com>  Sun, 14 Dec 2014 19:39:07 +0200

distros/debian/compat

@@ -0,0 +1 @@
+9

distros/debian/control

@@ -0,0 +1,58 @@
+Source: openalpr
+Section: video
+Priority: optional
+Maintainer: Matt Hill <matt@ndu.com>
+Build-Depends: debhelper (>= 9), libopencv-dev, libtesseract-dev, git, cmake,
+ build-essential, libtesseract-dev, libleptonica-dev, liblog4cplus-dev,
+ libcurl3-dev, uuid-dev
+Standards-Version: 3.9.5
+Homepage: https://github.com/openalpr/openalpr
+
+Package: libopenalpr1
+Section: libs
+Architecture: amd64
+Depends: openalpr-data (= ${source:Version}), ${shlibs:Depends}, ${misc:Depends}
+Description: Automated License Plate Recognition library (OpenALPR)
+ OpenALPR is an open source Automatic License Plate Recognition library written
+ in C++. The library analyzes images and identifies license plates. The output
+ is the text representation of any license plate characters found in the image.
+
+Package: libopenalpr-dev
+Section: libdevel
+Architecture: amd64
+Depends: libopenalpr1 (= ${binary:Version}), ${misc:Depends}
+Description: Development files for OpenALPR library
+ OpenALPR is an open source Automatic License Plate Recognition library written
+ in C++. The library analyzes images and identifies license plates. The output
+ is the text representation of any license plate characters found in the image.
+
+Package: openalpr-data
+Section: misc
+Architecture: all
+Depends: ${misc:Depends}
+Description: Runtime data for OpenALPR library
+ OpenALPR is an open source Automatic License Plate Recognition library written
+ in C++. The library analyzes images and identifies license plates. The output
+ is the text representation of any license plate characters found in the image.
+
+Package: openalpr-daemon
+Section: video
+Architecture: amd64
+Depends: openalpr-data (= ${source:Version}), ${shlibs:Depends}, ${misc:Depends}
+Description: Daemon to run OpenALPR in the background
+ OpenALPR is an open source Automatic License Plate Recognition library written
+ in C++. The library analyzes images and identifies license plates. The output
+ is the text representation of any license plate characters found in the image.
+ The OpenALPR daemon allows you to monitor a camera stream for license plate
+ numbers in the background. Alprd runs as a daemon process on Linux.
+ The plate numbers can be streamed to another server (via HTTP posts) or can be
+ consumed programmatically via a beanstalkd queue.
+
+Package: openalpr-utils
+Section: utils
+Architecture: amd64
+Depends: openalpr-data (= ${source:Version}), ${shlibs:Depends}, ${misc:Depends}
+Description: Utilities for the OpenALPR library
+ OpenALPR is an open source Automatic License Plate Recognition library written
+ in C++. The library analyzes images and identifies license plates. The output
+ is the text representation of any license plate characters found in the image.

distros/debian/copyright

@@ -0,0 +1,19 @@
+Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
+Upstream-Name: openalpr
+Source: https://github.com/openalpr/openalpr
+
+Files: *
+Copyright: 2013-2015 Matt Hill <matt@ndu.com>
+License: AGPL-3.0
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU Affero General Public License as
+    published by the Free Software Foundation, either version 3 of the
+    License, or (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU Affero General Public License for more details.
+
+    You should have received a copy of the GNU Affero General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.

distros/debian/docs

@@ -0,0 +1,2 @@
+cla.txt
+README.md

distros/debian/libopenalpr-dev.install

@@ -0,0 +1,3 @@
+usr/include/alpr.h
+usr/lib/lib*.a
+usr/lib/lib*so

distros/debian/libopenalpr1.install

@@ -0,0 +1,2 @@
+usr/lib/lib*.so.*
+usr/etc/openalpr/openalpr.conf etc/openalpr

distros/debian/openalpr-daemon.default

@@ -0,0 +1,22 @@
+# Defaults for alprd initscript
+# sourced by /etc/init.d/openalpr-daemon
+# installed at /etc/default/openalpr-daemon by the maintainer scripts
+#
+# This is a POSIX shell fragment
+#
+# These options can be set to modify the behavior of the openalr-daemon init script.
+# The options commented out show the default values.
+
+# Start the daemon if set to "yes"
+START_DAEMON="yes"
+
+# Path to the log file
+#LOGFILE="/var/log/alpr.log"
+
+# User and group the daemon should run as
+#USER="www-data"
+#GROUP="www-data"
+
+# Additional options that are passed to the daemon
+#DAEMON_OPTS="-n 20"
+

distros/debian/openalpr-daemon.init

@@ -0,0 +1,175 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:          openalpr-daemon
+# Required-Start:    $local_fs $network $remote_fs $syslog
+# Required-Stop:     $local_fs $network $remote_fs $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: OpenALPR daemon for license plate recognition
+# Description:       OpenALPR daemon detects license plate in the background
+### END INIT INFO
+
+# Author: lokidor <lokidor@lokiworld.net>
+
+unset USER
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+DESC="OpenALPR daemon"
+NAME=openalpr-daemon
+DAEMON=/usr/bin/alprd
+PIDFILE=/var/run/alprd.pid
+SCRIPTNAME=/etc/init.d/$NAME
+DEFAULT=/etc/default/$NAME
+
+# Exit if the package is not installed
+[ -x "$DAEMON" ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r $DEFAULT ] && . $DEFAULT
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
+# and status_of_proc is working.
+. /lib/lsb/init-functions
+
+# Do not start the daemon if NO_START is enabled in DEFAULT
+if [ "$START_DAEMON" != "yes" ] && [ "$1" != "stop" ]; then
+	log_warning_msg "$NAME: Not starting $DESC."
+	log_warning_msg "$NAME: Disabled in $DEFAULT."
+	exit 0
+fi
+
+# Set the default log file
+if [ -z $LOGFILE ]; then
+	LOGFILE=/var/log/alpr.log
+fi
+
+# Set the default daemon options
+if [ -z $DAEMON_OPTS ]; then
+	DAEMON_OPTS="-n 20"
+fi
+
+# Run as `www-data' if USER is not specified or is `root'
+if [ -z $USER ]; then
+	USER=www-data
+fi
+
+# If no group is specified, use USER
+if [ -z $GROUP ]; then
+	GROUP=$USER
+fi
+
+DAEMON_ARGS="-l $LOGFILE $DAEMON_OPTS"
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+	# Return
+	#   0 if daemon has been started
+	#   1 if daemon was already running
+	#   2 if daemon could not be started
+	[ ! -f $LOGFILE ] && touch $LOGFILE && chown $USER:$GROUP $LOGFILE \
+		|| return 2
+	start-stop-daemon --start --quiet --pidfile $PIDFILE \
+		--chuid $USER:$GROUP --exec $DAEMON --test > /dev/null \
+		|| return 1
+	start-stop-daemon --start --quiet --pidfile $PIDFILE \
+		--chuid $USER:$GROUP --exec $DAEMON -- \
+		$DAEMON_ARGS \
+		|| return 2
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+	# Return
+	#   0 if daemon has been stopped
+	#   1 if daemon was already stopped
+	#   2 if daemon could not be stopped
+	#   other if a failure occurred
+	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+	RETVAL="$?"
+	[ "$RETVAL" = 2 ] && return 2
+	# Wait for children to finish too if this is a daemon that forks
+	# and if the daemon is only ever run from this initscript.
+	# If the above conditions are not satisfied then add some other code
+	# that waits for the process to drop all resources that could be
+	# needed by services started subsequently.  A last resort is to
+	# sleep for some time.
+	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+	[ "$?" = 2 ] && return 2
+	# Many daemons don't delete their pidfiles when they exit.
+	rm -f $PIDFILE
+	return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+	#
+	# If the daemon can reload its configuration without
+	# restarting (for example, when it is sent a SIGHUP),
+	# then implement that here.
+	#
+	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+	return 0
+}
+
+case "$1" in
+  start)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+	do_start
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  stop)
+	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+	do_stop
+	case "$?" in
+		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+	esac
+	;;
+  status)
+	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+	;;
+  restart|force-reload)
+	#
+	# If the "reload" option is implemented then remove the
+	# 'force-reload' alias
+	#
+	log_daemon_msg "Restarting $DESC" "$NAME"
+	do_stop
+	case "$?" in
+	  0|1)
+		do_start
+		case "$?" in
+			0) log_end_msg 0 ;;
+			1) log_end_msg 1 ;; # Old process is still running
+			*) log_end_msg 1 ;; # Failed to start
+		esac
+		;;
+	  *)
+		# Failed to stop
+		log_end_msg 1
+		;;
+	esac
+	;;
+  *)
+	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+	exit 3
+	;;
+esac
+
+:

distros/debian/openalpr-daemon.install

@@ -0,0 +1,2 @@
+usr/bin/alprd
+usr/etc/openalpr/alprd.conf etc/openalpr

distros/debian/openalpr-data.install

@@ -0,0 +1 @@
+usr/share/openalpr/runtime_data

distros/debian/openalpr-utils.install

@@ -0,0 +1,6 @@
+usr/bin/alpr
+usr/bin/sortstate-openalpr-utils
+usr/bin/classifychars-openalpr-utils
+usr/bin/benchmark-openalpr-utils
+usr/bin/prepcharsfortraining-openalpr-utils
+usr/bin/tagplates-openalpr-utils

distros/debian/openalpr-utils.manpages

@@ -0,0 +1 @@
+doc/man/alpr.1

distros/debian/patches/enable_utilities.diff

@@ -0,0 +1,67 @@
+--- a/src/misc_utilities/CMakeLists.txt
++++ b/src/misc_utilities/CMakeLists.txt
+@@ -1,28 +1,28 @@
+ 
+-ADD_EXECUTABLE( sortstate EXCLUDE_FROM_ALL sortstate.cpp  )
+-TARGET_LINK_LIBRARIES(sortstate 
+-    openalpr-static
++ADD_EXECUTABLE( sortstate-openalpr-utils sortstate.cpp  )
++TARGET_LINK_LIBRARIES(sortstate-openalpr-utils
++    openalpr
+     support
+     ${OpenCV_LIBS} 
+ 	${Tesseract_LIBRARIES}
+   )
+   
+-ADD_EXECUTABLE( classifychars EXCLUDE_FROM_ALL classifychars.cpp )
+-TARGET_LINK_LIBRARIES(classifychars 
+-    openalpr-static
++ADD_EXECUTABLE( classifychars-openalpr-utils classifychars.cpp )
++TARGET_LINK_LIBRARIES(classifychars-openalpr-utils
++    openalpr
+     support
+     ${OpenCV_LIBS} 
+ 	${Tesseract_LIBRARIES}
+   )
+   
+   
+-ADD_EXECUTABLE(benchmark  EXCLUDE_FROM_ALL
++ADD_EXECUTABLE(benchmark-openalpr-utils
+ 		benchmarks/benchmark.cpp 
+ 		benchmarks/benchmark_utils.cpp 
+ 		benchmarks/endtoendtest.cpp 
+ )
+-TARGET_LINK_LIBRARIES(benchmark 
+-    openalpr-static
++TARGET_LINK_LIBRARIES(benchmark-openalpr-utils
++    openalpr
+     support
+     pthread
+     ${OpenCV_LIBS} 
+@@ -30,16 +30,22 @@
+   )
+   
+   
+-ADD_EXECUTABLE( prepcharsfortraining EXCLUDE_FROM_ALL prepcharsfortraining.cpp )
+-TARGET_LINK_LIBRARIES(prepcharsfortraining 
++ADD_EXECUTABLE( prepcharsfortraining-openalpr-utils prepcharsfortraining.cpp )
++TARGET_LINK_LIBRARIES(prepcharsfortraining-openalpr-utils
+     support
+     ${OpenCV_LIBS} 
+   )
+   
+   
+-ADD_EXECUTABLE( tagplates EXCLUDE_FROM_ALL tagplates.cpp )
+-TARGET_LINK_LIBRARIES(tagplates 
++ADD_EXECUTABLE( tagplates-openalpr-utils tagplates.cpp )
++TARGET_LINK_LIBRARIES(tagplates-openalpr-utils
+     support
+     ${OpenCV_LIBS} 
+   )
+   
++install (TARGETS sortstate-openalpr-utils DESTINATION bin)
++install (TARGETS classifychars-openalpr-utils DESTINATION bin)
++install (TARGETS benchmark-openalpr-utils DESTINATION bin)
++install (TARGETS prepcharsfortraining-openalpr-utils DESTINATION bin)
++install (TARGETS tagplates-openalpr-utils DESTINATION bin)
++

distros/debian/patches/install_static_library.diff

@@ -0,0 +1,10 @@
+--- a/src/openalpr/CMakeLists.txt
++++ b/src/openalpr/CMakeLists.txt
+@@ -47,6 +47,7 @@
+ 
+ 
+ install (FILES   alpr.h     DESTINATION    ${CMAKE_INSTALL_PREFIX}/include)
++install (TARGETS openalpr-static DESTINATION ${CMAKE_INSTALL_PREFIX}/lib)
+ install (TARGETS openalpr   DESTINATION    ${CMAKE_INSTALL_PREFIX}/lib)
+ 
+ # Add definition for default config file

distros/debian/patches/make_alpr_dependent_to_shared_library.diff

@@ -0,0 +1,11 @@
+--- a/src/CMakeLists.txt
++++ b/src/CMakeLists.txt
+@@ -55,7 +55,7 @@
+ ADD_EXECUTABLE( alpr  main.cpp )
+ 
+ TARGET_LINK_LIBRARIES(alpr
+-	openalpr-static
++	openalpr
+ 	support
+     video
+ 	${OpenCV_LIBS}

distros/debian/patches/series

@@ -0,0 +1,3 @@
+install_static_library.diff
+make_alpr_dependent_to_shared_library.diff
+enable_utilities.diff

distros/debian/rules

@@ -0,0 +1,78 @@
+#!/usr/bin/make -f
+# See debhelper(7) (uncomment to enable)
+# output every command that modifies files on the build system.
+#DH_VERBOSE = 1
+
+# see EXAMPLES in dpkg-buildflags(1) and read /usr/share/dpkg/*
+# DPKG_EXPORT_BUILDFLAGS = 1
+include /usr/share/dpkg/default.mk
+#
+
+# These are used to get the most recent version of the original sources from github
+UURL = $(shell git config --get remote.origin.url)
+BRANCH = $(shell git rev-parse --abbrev-ref HEAD)
+HEAD = $(shell git rev-parse HEAD)
+PKD  = $(shell pwd)/debian
+PKG  = $(word 2,$(shell dpkg-parsechangelog -l$(PKD)/changelog | grep ^Source))
+VER ?= $(shell dpkg-parsechangelog -l$(PKD)/changelog | perl -ne 'print $$1 if m{^Version:\s+(?:\d+:)?(\d.*)(?:\-\d+.*)};')
+DTYPE =
+TARBALL = ../$(PKG)_$(VER)$(DTYPE).orig.tar.xz
+
+# see FEATURE AREAS in dpkg-buildflags(1)
+#export DEB_BUILD_MAINT_OPTIONS = hardening=+all
+
+# see ENVIRONMENT in dpkg-buildflags(1)
+# package maintainers to append CFLAGS
+#export DEB_CFLAGS_MAINT_APPEND  = -Wall -pedantic
+# package maintainers to append LDFLAGS
+#export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed
+
+# main packaging script based on dh7 syntax
+%:
+	dh $@ --sourcedirectory=src --with quilt
+
+# debmake generated override targets
+# This is example for Cmake (See http://bugs.debian.org/641051 )
+#override_dh_auto_configure:
+#	dh_auto_configure -- \
+#	-DCMAKE_BUILD_TYPE:STRING=Debug
+
+# Inspired by https://wiki.debian.org/onlyjob/get-orig-source
+.PHONY: get-orig-source
+get-orig-source: $(TARBALL) $(info I: $(PKG)_$(VER)$(DTYPE))
+	@
+
+$(TARBALL):
+	$(if $(wildcard $(PKG)-$(VER)),$(error folder '$(PKG)-$(VER)' exists, aborting...))
+	@echo "# Cloning origin repository..."; \
+	if ! git clone $(UURL) $(PKG)-$(VER); then \
+	  $(RM) -r $(PKG)-$(VER); \
+	  echo "failed to clone repository, aborting..."; \
+	  false; \
+	fi
+	@if [ $(BRANCH) != "master" ]; then \
+	  cd $(PKG)-$(VER); \
+	  echo "# Not on master branch, fetching origin branch '$(BRANCH)'..."; \
+	  git fetch origin $(BRANCH):$(BRANCH) || false; \
+	  echo "# Switching to branch '$(BRANCH)'..."; \
+	  git checkout $(BRANCH) || false; \
+	fi
+	@echo "# Checking local source..."
+	@if [ $$(cd $(PKG)-$(VER) && git rev-parse HEAD) = $(HEAD) ]; then \
+	  echo "even with origin, ok"; \
+	  true; \
+	else \
+	  echo "not even with origin, aborting..."; \
+	  false; \
+	fi
+	@echo "# Setting times..."
+	@cd $(PKG)-$(VER) \
+	&& for F in $$(git ls-tree -r --name-only HEAD | sed -e "s/\s/\*/g"); do \
+	  touch --no-dereference -d "$$(git log -1 --format="%ai" -- $$F)" "$$F"; \
+	done
+	@echo "# Cleaning-up..."
+	cd $(PKG)-$(VER) && $(RM) -r .git
+	@echo "# Packing file '$(TARBALL)'..."
+	@find -L "$(PKG)-$(VER)" -xdev -type f -print | sort \
+	| XZ_OPT="-6v" tar -caf "$(TARBALL)" -T- --owner=root --group=root --mode=a+rX \
+	&& $(RM) -r "$(PKG)-$(VER)"

distros/debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)